scholarly journals Numerical Investigation of the Impacts of Borehole Breakouts on Breakdown Pressure

Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 888 ◽  
Author(s):  
Hua Zhang ◽  
Shunde Yin ◽  
Bernt Aadnoy
Keyword(s):  
Hydraulic Fracturing ◽  
Shear Failure ◽  
In Situ Stress ◽  
Test Results ◽  
Breakdown Pressure ◽  
Borehole Breakout ◽  
Borehole Breakouts ◽  
The Difference ◽  
Mud Pressure

Borehole breakouts appear in drilling and production operations when rock subjected to in situ stress experiences shear failure. However, if a borehole breakout occurs, the boundary of the borehole is no longer circular and the stress distribution around it is different. So, the interpretation of the hydraulic fracturing test results based on the Kirsch solution may not be valid. Therefore, it is important to investigate the factors that may affect the correct interpretation of the breakdown pressure in a hydraulic fracturing test for a borehole that had breakouts. In this paper, two steps are taken to implement this investigation. First, sets of finite element modeling provide sets of data on borehole breakout measures. Second, for a given measure of borehole breakouts, according to the linear relation between the mud pressure and the stress on the borehole wall, the breakdown pressure considering the borehole breakouts is acquired by applying different mud pressure in the model. Results show the difference between the breakdown pressure of a circular borehole and that of borehole that had breakouts could be as large as 82% in some situations.

Engineering Charts for Predicting Breakdown Pressure for Finite-Length Wellbore Intervals

2021 ◽  
Author(s):  
Yanhui Han ◽  
Shengli Chen ◽  
Younane Abousleiman
Keyword(s):  
Finite Length ◽  
In Situ Stress ◽  
Injection Rate ◽  
Time Dependent ◽  
Drilling Mud ◽  
Breakdown Pressure ◽  
Pumping Rate ◽  
Mud Pressure ◽  
Geological Formations

Abstract In wellbore drilling, the drilling mud density needs to be carefully selected such that the mud pressure inside the wellbore will not exceed formation breakdown pressure to avoid wellbore fracturing and extensive mud losses. However, in the hydraulic fracturing treatment, the lesser the value of the formation breakdown pressure the more optimal is the operation. We found out in this study that the pumping schedule (e.g., pumping duration and pumping rate) are factors in optimizing the breakdown pressure. In addition, this work investigates the effects of the finite length between packers on the magnitude of the breakdown pressure in various geological formations. The time-dependent evolving stresses around the wellbore are solved in the framework of time-dependent poroelasticity theory. The breakdown pressure is predicted from the evolution of the circumferential effective stresses. The effects of injection rate, formation properties, borehole diameter and length, and pumping duration on the breakdown pressure are presented in the form of engineering charts, for representative in-situ stress.

scholarly journals In-situ Desaturation Tests by Electrolysis for Liquefaction Mitigation

2021 ◽  
Author(s):  
Runze Chen ◽  
Yumin Chen ◽  
Hanlong Liu ◽  
Kunxian Zhang ◽  
Ying Zhou ◽  
...  
Keyword(s):  
Minimum Degree ◽  
Electricity Consumption ◽  
Potential Method ◽  
Economic Benefits ◽  
Degree Of Saturation ◽  
Test Results ◽  
Liquefaction Resistance ◽  
The Difference ◽  
Maximum And Minimum Degree

Electrolytic desaturation is a potential method for improving the liquefaction resistance of the liquefiable foundation by reducing the soil saturation. In this study, in-situ desaturation tests were performed to investigate the resistivity of soil at different depth and the water level of the foundation under different current. The test results show that at constant currents of 1 A (Ampere, unit of the direct current), 2 A and 3 A, the saturation of the treated foundation reached 87%, 83% and 80%. During the electrolysis process, the generated gas migrates vertically and horizontally under the influence of buoyancy and gas pressure. In the end of electrolysis, the gas inside the sand foundation basically migrates vertically only. The higher current intensity employed for electrolysis will affect the uniformity and stability of the gas. At constant currents of 1 A, 2 A and 3 A, the difference between the maximum and minimum degree of saturation in the treated foundation was 14%, 18% and 19%; and after electrolysis halted for 144 h, the saturation in the treated foundation was 90%, 85% and 87%. The electricity consumption analysis indicates that the desaturation method has excellent economic benefits in the treatment of saturated sand foundations.

scholarly journals Numerical Study of Fracture Characteristics of Deep Granite Induced by Blast Stress Wave

2021 ◽  
Vol 2021 ◽  
pp. 1-22
Author(s):  
Zheming Zhu ◽  
Weiting Gao ◽  
Duanying Wan ◽  
Meng Wang ◽  
Yun Shu
Keyword(s):  
Shear Failure ◽  
Numerical Study ◽  
Numerical Models ◽  
Rock Fracture ◽  
Initial Pressure ◽  
3D Models ◽  
In Situ Stress ◽  
Vertical Pressure ◽  
The Difference ◽  
Radial Cracks

To study the characteristics of rock fracture in deep underground under blast loads, some numerical models were established in AUTODYN code. Weibull distribution was used to characterize the inhomogeneity of rock, and a linear equation of state was applied to describe the relation of pressure and volume of granite elements. A new stress initialization method based on explicit dynamic calculation was developed to get an accurate stress distribution near the borehole. Two types of in situ stress conditions were considered. The effect of heterogeneous characteristics of material on blast-induced granite fracture was investigated. The difference between 2D models and 3D models was discussed. Based on the numerical results, it can be concluded that the increase of the magnitude of initial pressure can change the mechanism of shear failure near the borehole and suppress radial cracks propagation. When initial lateral pressure is invariable, with initial vertical pressure rising, radial cracks along the acting direction of vertical pressure will be promoted, and radial cracks in other directions will be prevented. Heterogeneous characteristics of material have an obvious influence on the shear failure zones around the borehole.

The Application of Hydraulic Fracturing in Storage Projects of Liquefied Petroleum Gas

2006 ◽  
Vol 306-308 ◽  
pp. 1509-1514 ◽  
Author(s):  
Jing Feng ◽  
Qian Sheng ◽  
Chao Wen Luo ◽  
Jing Zeng
Keyword(s):  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Stress Measurement ◽  
Test Procedure ◽  
In Situ Stress ◽  
Test System ◽  
Petroleum Engineering ◽  
Liquefied Petroleum Gas

It is very important to study the pristine stress field in Civil, Mining, Petroleum engineering as well as in Geology, Geophysics, and Seismology. There are various methods of determination of in-situ stress in rock mass. However, hydraulic fracturing techniques is the most convenient method to determine and interpret the test results. Based on an hydraulic fracturing stress measurement campaign at an underground liquefied petroleum gas storage project which locates in ZhuHai, China, this paper briefly describes the various uses of stress measurement, details of hydraulic fracturing test system, test procedure adopted and the concept of hydraulic fracturing in arriving at the in-situ stresses of the rock mass.

Coal Mine Hydraulic Fracturing Underground Drainage Research and Engineering Application

2017 ◽  
Vol 863 ◽  
pp. 334-341
Author(s):  
Jun Hui Fu ◽  
Guang Cai Wen ◽  
Fu Jin Lin ◽  
Hai Tao Sun ◽  
Ri Fu Li ◽  
...  
Keyword(s):  
Stress State ◽  
Hydraulic Fracturing ◽  
Coal Mine ◽  
Engineering Application ◽  
Fracture Morphology ◽  
Plane Stress State ◽  
Theoretical Formula ◽  
Test Results ◽  
Breakdown Pressure ◽  
Elastic Mechanics

Using elastic mechanics and fracture mechanics, analyzing the coal seam hydraulic fracturing breakdown pressure, given its theoretical formula. According to hydraulic fracturing stress status, given the form of two typical hydraulic fracture morphology. Analyzing hydraulic fracturing highly elliptical shape. The displacement field in plane stress state is given, and the theoretical formula of fracturing radius of hydraulic fracturing is deduced. The fracturing technology of underground fracturing is presented, and the fracturing location and fracturing parameters are determined. In Sihe Coal Mine conducted fracturing test, the test results showed that: the average of drainage volume of fracturing hole improved 4.4 times compared with non-pressed-hole. The extraction compliance time is reduced by 38%. Roadway tunneling speed was improved by 15%. It can solve the problem of gas overrun in roadway excavation well, and has a good application and popularization value.

Calculation and Implications of Breakdown Pressures in Directional Wellbore Stimulation

2015 ◽  
Author(s):  
Robert D. Barree ◽  
Jennifer L. Miskimins
Keyword(s):  
Shear Failure ◽  
Growth Parameters ◽  
Vertical Plane ◽  
Longitudinal Direction ◽  
In Situ Stress ◽  
Tensile Failure ◽  
Petroleum Engineering ◽  
Breakdown Pressure ◽  
Cascading Effects ◽  
Wellbore Pressure

Abstract In 1898, Kirsch published equations describing the elastic stresses around a circular hole that are still used today in wellbore pressure breakdown calculations. These equations are standard instruments used in multiple areas of petroleum engineering, however, the original equations were developed strictly for vertical well settings. In today's common directional or horizontal well situations, the equations need adjusted for both deviation from the vertical plane and orientation to the maximum and minimum horizontal in-situ stress anisotropy. This paper provides the mathematical development of these modified breakdown equations, along with examples of the implications in varying strike-slip and pore pressure settings. These examples show conditions where it is not unusual for breakdown pressure gradients to exceed 1.0 psi/ft and describes why certain stages in "porpoising" horizontal wells experience extreme breakdown issues during hydraulic fracturing treatments. The paper also discusses how, in most directional situations, the wellbore will almost always fail initially in a longitudinal direction at the borehole wall, after which the far-field stresses will take over and transverse components can be developed. Tortuosity and near wellbore friction pressure can actually add to forcing the initiation of such longitudinal fractures, which can then have cascading effects on other growth parameters such as cluster-to-cluster and stage-to-stage stress shadowing. Special considerations for highly laminated anisotropic formations, where shear failure of the wellbore may precede or preclude tensile failure, are also introduced. Such failure behaviors have significant implications on near wellbore conductivity requirements and can also greatly impact well production and recovery efforts.

scholarly journals The Influence of Bedding Planes and Permeability Coefficient on Fracture Propagation of Horizontal Wells in Stratification Shale Reservoirs

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-19
Author(s):  
Yuepeng Wang ◽  
Xiangjun Liu ◽  
Lixi Liang ◽  
Jian Xiong
Keyword(s):  
Permeability Coefficient ◽  
In Situ Stress ◽  
Stress Difference ◽  
Strength Parameters ◽  
Breakdown Pressure ◽  
Permeability Coefficients ◽  
Bedding Planes ◽  
Initiation Pressure ◽  
Shale Reservoirs

The complexity of hydraulic fractures (HF) significantly affects the success of reservoir reconstruction. The existence of a bedding plane (BP) in shale impacts the extension of a fracture. For shale reservoirs, in order to investigate the interaction mechanisms of HF and BPs under the action of coupled stress-flow, we simulate the processes of hydraulic fracturing under different conditions, such as the stress difference, permeability coefficients, BP angles, BP spacing, and BP mechanical properties using the rock failure process analysis code (RFPA2D-Flow). Simulation results showed that HF spread outward around the borehole, while the permeability coefficient is uniformly distributed at the model without a BP or stress difference. The HF of the formation without a BP presented a pinnate distribution pattern, and the main direction of the extension is affected by both the ground stress and the permeability coefficient. When there is no stress difference in the model, the fracture extends along the direction of the larger permeability coefficient. In this study, the in situ stress has a greater influence on the extension direction of the main fracture when using the model with stress differences of 6 MPa. As the BP angle increases, the propagation of fractures gradually deviates from the BP direction. The initiation pressure and total breakdown pressure of the models at low permeability coefficients are higher than those under high permeability coefficients. In addition, the initiation pressure and total breakdown pressure of the models are also different. The larger the BP spacing, the higher the compressive strength of the BP, and a larger reduction ratio (the ratio of the strength parameters of the BP to the strength parameters of the matrix) leads to a smaller impact of the BP on fracture initiation and propagation. The elastic modulus has no effect on the failure mode of the model. When HF make contact with the BP, they tend to extend along the BP. Under the same in situ stress condition, the presence of a BP makes the morphology of HF more complex during the process of propagation, which makes it easier to achieve the purpose of stimulated reservoir volume (SRV) fracturing and increased production.

Sign in / Sign up

Export Citation Format

Share Document