scholarly journals Review of Heat Recovery Technologies for Building Applications

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1285 ◽  
Author(s):  
Qi Xu ◽  
Saffa Riffat ◽  
Shihao Zhang
Keyword(s):  
Heat Recovery ◽  
High Performance ◽  
Natural Ventilation ◽  
Residential Buildings ◽  
Global Climate ◽  
Real Life ◽  
Thermal Conductance ◽  
Thermoelectric Module ◽  
Residential Building ◽  
Ventilation Systems

In recent years, interest in heat recovery systems for building applications has resurged due to concerns about the energy crisis and global climate changes. This review presents current developments in four kinds of heat recovery systems for residential building applications. A extensive investigation into the heat recovery integrated in energy-saving systems of residential buildings is also covered, including passive systems for building components, mechanical/natural ventilation systems, dehumidification systems, and the thermoelectric module (TE) system. Based on this review, key issues have been identified as follows: (1) The combination of heat recovery and energy-efficient systems could be considered as a promising approach to reduce greenhouse gas emissions and make residential buildings meet high performance and comfort requirements. However, real-life evaluation of these systems with economic analysis is insufficient; (2) When heat recovery is applied to mechanical ventilation systems, issues such as pressure leakages and air shortcuts should be addressed; (3) The heat pipe heat recovery system enjoys more potential in being combined with other sustainable technologies such as thermoelectric modules and solar energy systems due to its advantages, which include handy manufacturing and convenient maintenance, a lack of cross contamination, and greater thermal conductance.

scholarly journals Proposing Alternative Solutions to Enhance Natural Ventilation Rates in Residential Buildings in the Cfa Climate Zone of Rasht

2021 ◽  
Vol 13 (2) ◽  
pp. 679
Author(s):  
Roya Aeinehvand ◽  
Amiraslan Darvish ◽  
Abdollah Baghaei Daemei ◽  
Shima Barati ◽  
Asma Jamali ◽  
...  
Keyword(s):  
Natural Ventilation ◽  
Residential Buildings ◽  
Residential Building ◽  
Ventilation Rate ◽  
Humid Climate ◽  
The Sustainable Development ◽  
Passive Strategies ◽  
Development Goals ◽  
Ventilation Rates ◽  
Ventilation Systems

Today, renewable resources and the crucial role of passive strategies in energy efficiency in the building sector toward the sustainable development goals are more indispensable than ever. Natural ventilation has traditionally been considered as one of the most fundamental techniques to decrease energy usage by building dwellers and designers. The main purpose of the present study is to enhance the natural ventilation rates in an existing six-story residential building situated in the humid climate of Rasht during the summertime. On this basis, two types of ventilation systems, the Double-Skin Facade Twin Face System (DSF-TFS) and Single-Sided Wind Tower (SSWT), were simulated through DesignBuilder version 4.5. Then, two types of additional ventilation systems were proposed in order to accelerate the airflow, including four-sided as well as multi-opening wind towers. The wind foldable directions were at about 45 degrees (northwest to southeast). The simulation results show that SSWT could have a better performance than the aforementioned systems by about 38%. Therefore, the multi-opening system was able to enhance the ventilation rate by approximately 10% during the summertime.

Experimental analysis of an air-to-air heat recovery unit for balanced ventilation systems in residential buildings

2011 ◽  
Vol 52 (1) ◽  
pp. 635-640 ◽  
Author(s):  
José Fernández-Seara ◽  
Rubén Diz ◽  
Francisco J. Uhía ◽  
Alberto Dopazo ◽  
José M. Ferro
Keyword(s):  
Experimental Analysis ◽  
Heat Recovery ◽  
Residential Buildings ◽  
Recovery Unit ◽  
Ventilation Systems

scholarly journals Thermal Performance of a High-Rise Residential Building with Internal Courtyard in Tropical Climate

2018 ◽  
Vol 3 (7) ◽  
pp. 357
Author(s):  
Lobna Hassan Ali Hassan Elgheriani ◽  
Parid Wardi ◽  
AbdulBasit Ali Ali Ahmed
Keyword(s):  
Thermal Performance ◽  
Indoor Environment ◽  
Natural Ventilation ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Significant Feature ◽  
High Rise ◽  
Passive Design

Natural ventilation is an effectual passive design approach to create a better indoor thermal condition as well as energy efficiency. The primary goal of building design is providing a healthy and comfortable indoor environment titled as sustainable architecture. Literature suggests that the significant feature that alteration has to take place on for better energy performance is the envelope design. This paper aims to augment the Window to Wall Ratio (WWR), orientation and courtyard corridor size for improving the design of naturally ventilated courtyard high-rise residential buildings. Briefly, the findings indicate that contending with WWR, orientation and courtyard corridor size could increase the potential of improving its natural ventilation and thus, thermal performance.

scholarly journals Identification of Energy Efficiency Improvement Measures of an Existing Residential Building Using Audit-Assisted Energy Simulation and Analysis

2021 ◽  
Vol 12 (1) ◽  
pp. 18
Author(s):  
Farrukh Arif ◽  
Rabia Khalid ◽  
Nida Azhar
Keyword(s):  
Energy Cost ◽  
Energy Efficient ◽  
Natural Ventilation ◽  
Residential Buildings ◽  
Residential Building ◽  
Energy Performance ◽  
Information Modeling ◽  
Energy Efficiency Improvement ◽  
Improvement Measures ◽  
Potential Improvement

Depleting energy sources are forcing humans to preserve energy and utilize it wisely. Globally, researchers are working to find ways to manage the energy crisis. Residential buildings are considered to be in the most energy demanding sector. Therefore, efforts are being made to reduce the increasing energy consumption and make the buildings energy efficient. The paper focuses on finding ways to retrofit the existing residential buildings into energy efficient buildings. This study evaluated the energy performance of a G+2 residential building with a total of 3 floors covering an area of 991.68 sq. meters, to identify relevant potential improvement measures. An energy analysis of the building was performed using information modeling assisted with energy audit data for accurate and realistic analysis. It was found that there is potential for the reduction of the annual energy usage and annual energy cost up to 2.33% and 4.54% respectively, by making improvements in the window to wall ratio. Another potential energy cost saving of 14.8% can be achieved by changing Heating, Ventilation, Air Conditioning (HVAC) type, and 7.62% of a reduction in cost can be achieved through modification in lighting fixtures. Moreover, installing solar photovoltaic panels can save up to PKR 1 million, and natural ventilation could result in saving more than PKR 0.2 million annually.

scholarly journals Humidity-Sensitive, Demand-Controlled Ventilation Applied to Multiunit Residential Building—Performance and Energy Consumption in Dfb Continental Climate

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6669
Author(s):  
Jerzy Sowa ◽  
Maciej Mijakowski
Keyword(s):  
Energy Consumption ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Primary Energy ◽  
Controlled Ventilation ◽  
Carbon Dioxide Concentrations ◽  
Demand Controlled Ventilation ◽  
Continental Climate ◽  
Ventilation Systems

Humidity-sensitive, demand-controlled ventilation systems have been in use for many years in regions with oceanic climates. Some attempts have been made to apply this technology in Poland, which has a continental climate. This article evaluates the performance and energy consumption of such a system when applied in an eight-floor, multiunit, residential building, i.e., the virtual reference building described by the National Energy Conservation Agency (NAPE), Poland. Simulations using the computer program CONTAM were performed for the whole heating season based upon the climate in Warsaw. Besides passive stack ventilation, that served as a reference, two ventilation systems were studied: one standard and one “hybrid” system with additional roof fans. This study confirmed that the application of humidity-sensitive, demand-controlled ventilation in multiunit residential buildings in a continental climate (Dfb) led to significant energy savings (up to 11.64 kWh/m2 of primary energy). However, the operation of the system on higher floors was found to be ineffective. Ensuring consistent operation of the system on all floors required supplementary fans. The introduction of a hybrid mode reduced carbon dioxide concentrations by approximately 32% in the units located in the upper part of the building. The energetic effect in such cases depends strongly on the electricity source. In the case of the national energy grid, savings of primary energy would be relatively low, i.e., 1.07 kWh/m2, but in the case of locally produced renewable energy, the energy savings would be equal to 5.18 kWh/m2.

scholarly journals Simulation and Measurement of Energetic Performance in Decentralized Regenerative Ventilation Systems

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 6010
Author(s):  
Nicolas Carbonare ◽  
Hannes Fugmann ◽  
Nasir Asadov ◽  
Thibault Pflug ◽  
Lena Schnabel ◽  
...  
Keyword(s):  
Heat Exchanger ◽  
Heat Recovery ◽  
Residential Buildings ◽  
Simulation Models ◽  
Hydraulic Modeling ◽  
Test Facility ◽  
Test Case ◽  
Building Performance ◽  
Regenerative Heat ◽  
Ventilation Systems

Decentralized regenerative mechanical ventilation systems have acquired relevance in recent years for the retrofit of residential buildings. While manufacturers report heat recovery efficiencies over 90%, research has shown that the efficiencies often vary between 60% and 80%. In order to better understand this mismatch, a test facility is designed and constructed for the experimental characterization and validation of regenerative heat exchanger simulation models. A ceramic honeycomb heat exchanger, typical for decentralized regenerative ventilation devices, is measured in this test facility. The experimental data are used to validate two modeling approaches: a one-dimensional model in Modelica and a computational fluid dynamics (CFD) model built in COMSOL Multiphysics®. The results show an overall acceptable thermal performance of both models, the 1D model having a much lower simulation time and, thus, being suitable for integration in building performance simulations. A test case is designed, where the importance of an appropriate thermal and hydraulic modeling of decentralized ventilation systems is investigated. Therefore, the device is integrated into a multizone building simulation case. The results show that including component-based heat recovery and fan modeling leads to 30% higher heat losses due to ventilation and 10% more fan energy consumption than when assuming constant air exchange rates with ideal heat recovery. These findings contribute to a better understanding of the behavior of a growing technology such as decentralized ventilation and confirm the need for further research on these systems.

scholarly journals Numerical Assessment of Seven Ventilation Systems for Social Residential Buildings based on Indoor Air Quality and Energy Consumption

2021 ◽  
Vol 2069 (1) ◽  
pp. 012181
Author(s):  
Guillaume Sérafin ◽  
Marc O. Abadie ◽  
Patrice Joubert
Keyword(s):  
Air Quality ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Natural Ventilation ◽  
Residential Buildings ◽  
Living Room ◽  
Internal Sources ◽  
Controlled Mechanical Systems ◽  
Ventilation Systems

Abstract This work presents a modelling approach for evaluating ventilation systems for their ability to provide good indoor air quality in dwellings. Infiltration and ventilation rates are defined by the conventional French 3CL-DPE standard. The case study is a two-bedroom apartment with a shared or separate kitchen and living room. Three natural ventilation options and four mechanical ventilation systems are compared with respect to exposure to PM2.5, NO2 and formaldehyde. Pollutant concentration levels are assessed in each room based on a scenario of daily occupancy, average annual outdoor concentrations and internal sources. The daily exposure of the occupants to the targeted substances allows the comparison of ventilation systems on the basis of the ULR-QAI index developed at LaSIE laboratory from La Rochelle University. For this case study, it results that controlled mechanical systems are much more efficient than natural ventilation systems, especially in the case of an open-plan kitchen.

Decentralized Ventilation Systems with Exhaust Air Heat Recovery in the Case of Residential Buildings

2014 ◽  
Vol 680 ◽  
pp. 524-528 ◽  
Author(s):  
Vera Murgul ◽  
Dusan Vuksanovic ◽  
Nikolay Vatin ◽  
Viktor Pukhkal
Keyword(s):  
Heat Recovery ◽  
Residential Buildings ◽  
Basic System ◽  
Ventilation Systems

Decentralized ventilation systems applied in residential buildings are generalized in this article. Basic system elements and devices and tools assigned for its application are considered herein. Basic requirements for design of the ventilation systems used in residential buildings are stipulated.

Sign in / Sign up

Export Citation Format

Share Document