scholarly journals Capturing Flow Energy from Ocean and Wind

Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2184 ◽  
Author(s):  
Ying Gong ◽  
Zhengbao Yang ◽  
Xiaobiao Shan ◽  
Yubiao Sun ◽  
Tao Xie ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
State Of The Art ◽  
Working Environment ◽  
Superior Performance ◽  
Energy Harvesters ◽  
Flow Energy ◽  
Existing Problems ◽  
Piezoelectric Energy ◽  
Harvesting Techniques ◽  
Triboelectric Nanogenerators

Flow-induced energy harvesting has attracted more and more attention among researchers in both fields of the wind and the fluid. Piezoelectric energy harvesters and triboelectric nanogenerators are exploited to obtain superior performance and sustainability, and the electromagnetic conversion has been continuously improved in the meantime. Aiming at different circumstances, researchers have designed, manufactured, and tested a variety of energy harvesters. In this paper, we analyze the state-of-the-art energy harvesting techniques and categorize them based on the working environment, application targets, and energy conversion mechanisms. The trend of research endeavors is analyzed, and the advantages, existing problems of energy harvesters, and corresponding solutions of energy harvesters are assessed.

Piezoelectricity-Based Energy Harvesting from Mechanical Vibration

2012 ◽  
Vol 220-223 ◽  
pp. 943-946
Author(s):  
Kang Qi Fan ◽  
Bo Wang ◽  
Hai Dong Huo
Keyword(s):  
Energy Harvesting ◽  
Mechanical Vibration ◽  
Ambient Vibration ◽  
Energy Harvesters ◽  
Flow Energy ◽  
Piezoelectric Energy ◽  
Depth Study ◽  
Harvesting Techniques ◽  
Future Work ◽  
Ambient Excitation

Harvesting energy from the environment has been widely investigated to power and maintain low-power devices. This paper reviews the potential energy sources, piezoelectric conversion mechanism, recently proposed piezoelectric energy harvesters (PEH), and micropower management circuits. It can be concluded that the output power of PEH is still comparatively small, especially when the ambient excitation frequencies deviate from PEH’s resonant frequency. Future work should focus on tuning or widening the operate frequency of PEH so that it can match the ambient vibration frequency at all time. Moreover, flow energy harvesting techniques compatible with MEMS techniques demand in-depth study to facilitate the fabrication of micro PEHs.

Multimodal pizza-shaped piezoelectric vibration-based energy harvesters

2021 ◽  
pp. 1045389X2110069
Author(s):  
Virgilio J Caetano ◽  
Marcelo A Savi
Keyword(s):  
Energy Harvesting ◽  
Frequency Spectrum ◽  
Optimization Procedure ◽  
Single Mode ◽  
Ambient Vibration ◽  
Vibration Source ◽  
Element Analysis ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Harvesting Systems

Energy harvesting from ambient vibration through piezoelectric devices has received a lot of attention in recent years from both academia and industry. One of the main challenges is to develop devices capable of adapting to diverse sources of environmental excitation, being able to efficiently operate over a broadband frequency spectrum. This work proposes a novel multimodal design of a piezoelectric energy harvesting system to harness energy from a wideband ambient vibration source. Circular-shaped and pizza-shaped designs are employed as candidates for the device, comparing their performance with classical beam-shaped devices. Finite element analysis is employed to model system dynamics using ANSYS Workbench. An optimization procedure is applied to the system aiming to seek a configuration that can extract energy from a broader frequency spectrum and maximize its output power. A comparative analysis with conventional energy harvesting systems is performed. Numerical simulations are carried out to investigate the harvester performances under harmonic and random excitations. Results show that the proposed multimodal harvester has potential to harness energy from broadband ambient vibration sources presenting performance advantages in comparison to conventional single-mode energy harvesters.

Geometric and Material Optimization of Vortex-Induced Vibration Micro Energy Harvesters for Localized Wind Environments

2012 ◽  
Author(s):  
Jesse J. French ◽  
Colton T. Sheets
Keyword(s):  
Energy Harvesting ◽  
Power Output ◽  
Fluid Velocity ◽  
Frequency Variation ◽  
Vortex Induced Vibration ◽  
Energy Harvesters ◽  
Wind Speeds ◽  
Material Optimization ◽  
Piezoelectric Energy ◽  
Wind Velocities

Wind energy capture in today’s environment is often focused on producing large amounts of power through massive turbines operating at high wind speeds. The device presented by the authors performs on the extreme opposite scale of these large wind turbines. Utilizing vortex induced vibration combined with developed and demonstrated piezoelectric energy harvesting techniques, the device produces power consistent with peer technologies in the rapidly growing field of micro-energy harvesting. Vortex-induced vibrations in the Karman vortex street are the catalyst for energy production of the device. To optimize power output, resonant frequency of the harvester is matched to vortex shedding frequency at a given wind speed, producing a lock-on effect that results in the greatest amplitude of oscillation. The frequency of oscillation is varied by altering the effective spring constant of the device, thereby allowing for “tuning” of the device to specific wind environments. While localized wind conditions are never able to be predicted with absolute certainty, patterns can be established through thorough data collection. Sampling of local wind conditions led to the design and testing of harvesters operating within a range of wind velocities between approximately 4 mph and 25 mph. For the extremities of this range, devices were constructed with resonant frequencies of approximately 17 and 163 Hz. Frequency variation was achieved through altering the material composition and geometry of the energy harvester. Experimentation was performed on harvesters to determine power output at optimized fluid velocity, as well as above and below. Analysis was also conducted on shedding characteristics of the device over the tested range of wind velocities. Computational modeling of the device is performed and compared to experimentally produced data.

scholarly journals Theory of energy harvesting from heartbeat including the effects of pleural cavity and respiration

2017 ◽  
Vol 473 (2207) ◽  
pp. 20170615 ◽  
Author(s):  
Yangyang Zhang ◽  
Bingwei Lu ◽  
Chaofeng Lü ◽  
Xue Feng
Keyword(s):  
Energy Harvesting ◽  
Pleural Cavity ◽  
Scaling Law ◽  
Battery Life ◽  
Deformation Model ◽  
Experimental Measurements ◽  
Combined System ◽  
Energy Harvesters ◽  
Piezoelectric Energy

Self-powered implantable devices with flexible energy harvesters are of significant interest due to their potential to solve the problem of limited battery life and surgical replacement. The flexible electronic devices made of piezoelectric materials have been employed to harvest energy from the motion of biological organs. Experimental measurements show that the output voltage of the device mounted on porcine left ventricle in chest closed environment decreases significantly compared to the case of chest open. A restricted-space deformation model is proposed to predict the impeding effect of pleural cavity, surrounding tissues, as well as respiration on the efficiency of energy harvesting from heartbeat using flexible piezoelectric devices. The analytical solution is verified by comparing theoretical predictions to experimental measurements. A simple scaling law is established to analyse the intrinsic correlations between the normalized output power and the combined system parameters, i.e. the normalized permitted space and normalized electrical load. The results may provide guidelines for optimization of in vivo energy harvesting from heartbeat or the motions of other biological organs using flexible piezoelectric energy harvesters.

Embedded Metamaterial Subframe Patch for Increased Power Output of Piezoelectric Energy Harvesters

2021 ◽  
pp. 1-9
Author(s):  
Saman Farhangdoust ◽  
Gary Georgeson ◽  
Jeong-Beom Ihn ◽  
Armin Mehrabi
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Renewable Energy Sources ◽  
Piezoelectric Element ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Harvesting Systems ◽  
Host Structure ◽  
Self Powered ◽  
Low Efficiency

Abstract These days, piezoelectric energy harvesting (PEH) is introduced as one of the clean and renewable energy sources for powering the self-powered sensors utilized for wireless condition monitoring of structures. However, low efficiency is the biggest drawback of the PEHs. This paper introduces an innovative embedded metamaterial subframe (MetaSub) patch as a practical solution to address the low throughput limitation of conventional PEHs whose host structure has already been constructed or installed. To evaluate the performance of the embedded MetaSub patch (EMSP), a cantilever beam is considered as the host structure in this study. The EMSP transfers the auxetic behavior to the piezoelectric element (PZT) wherever substituting a regular beam with an auxetic beam is either impracticable or suboptimal. The concept of the EMSP is numerically validated, and the COMSOL Multiphysics software was employed to investigate its performance when a cantilever beam is subjected to different amplitude and frequency. The FEM results demonstrate that the harvesting power in cases that use the EMSP can be amplified up to 5.5 times compared to a piezoelectric cantilever energy harvester without patch. This paper opens up a great potential of using EMSP for different types of energy harvesting systems in biomedical, acoustics, civil, electrical, aerospace, and mechanical engineering applications.

scholarly journals On the Effects of Structural Coupling on Piezoelectric Energy Harvesting Systems Subject to Random Base Excitation

Aerospace ◽  
2020 ◽  
Vol 7 (7) ◽  
pp. 93
Author(s):  
Hamidreza Masoumi ◽  
Hamid Moeenfard ◽  
Hamed Haddad Khodaparast ◽  
Michael I. Friswell
Keyword(s):  
Energy Harvesting ◽  
Mechanical Response ◽  
Harmonic Excitation ◽  
Point Of View ◽  
Analytical Models ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Novel Approach ◽  
Band Limited ◽  
Multi Body

The current research investigates the novel approach of coupling separate energy harvesters in order to scavenge more power from a stochastic point of view. To this end, a multi-body system composed of two cantilever harvesters with two identical piezoelectric patches is considered. The beams are interconnected through a linear spring. Assuming a stochastic band limited white noise excitation of the base, the statistical properties of the mechanical response and those of the generated voltages are derived in closed form. Moreover, analytical models are derived for the expected value of the total harvested energy. In order to maximize the expected generated power, an optimization is performed to determine the optimum physical and geometrical characteristics of the system. It is observed that by properly tuning the harvester parameters, the energy harvesting performance of the structure is remarkably improved. Furthermore, using an optimized energy harvester model, this study shows that the coupling of the beams negatively affects the scavenged power, contrary to the effect previously demonstrated for harvesters under harmonic excitation. The qualitative and quantitative knowledge resulting from this analysis can be effectively employed for the realistic design and modelling of coupled multi-body structures under stochastic excitations.

Piezoelectric energy harvesting from roadway deformation under various traffic flow conditions

2020 ◽  
Vol 31 (15) ◽  
pp. 1751-1762
Author(s):  
Yangyang Zhang ◽  
He Zhang ◽  
Chaofeng Lü ◽  
Yisheng Chen ◽  
Ji Wang
Keyword(s):  
Energy Harvesting ◽  
Traffic Flow ◽  
Laboratory Tests ◽  
Piezoelectric Energy Harvesting ◽  
Flow Conditions ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Roadway Deformation ◽  
Real Traffic

Many laboratory tests and in situ measurements have been conducted to study piezoelectric energy harvesting from roadway deformation. However, the performance of piezoelectric energy harvesters under real traffic flow conditions is still unknown. In this study, an electromechanical model of piezoelectric energy harvesters with detailed parameters (including the geometric parameters, material parameters, and circuits) is established, and the influences of traffic flow conditions (i.e. traffic speed and traffic density) on the output power of piezoelectric energy harvesters are analyzed by employing a scaling law method and traffic flow theory. The results indicate that remarkable differences exist in the load patterns and the frequencies between the laboratory tests (or in situ measurements) and real traffic flow conditions. Because of these differences, the results (especially the output electric power and optimization design methods) of previous studies may be inapplicable for piezoelectric energy harvesters embedded in roadways. Considering the distinguishing features of the traffic load pattern, the optimization criteria to determine the geometric parameters and the intrinsic system parameter of piezoelectric energy harvesters are obtained, and the corresponding optimal output power densities of the piezoelectric energy harvesters are also quantitatively calibrated. These theoretical results may serve as guidelines for optimizing the design of piezoelectric energy harvesters embedded in roadways under different traffic flow conditions.

On Mathematical Modeling of Piezoelectric Energy Harvesters

2014 ◽  
Vol 953-954 ◽  
pp. 655-658 ◽  
Author(s):  
Guang Qing Shang ◽  
Hong Bing Wang ◽  
Chun Hua Sun
Keyword(s):  
Mathematical Modeling ◽  
Energy Harvesting ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Piezoelectric Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Energy Harvesting System ◽  
Piezoelectric Vibration

Energy harvesting system has become one of important areas of ​​research and develops rapidly. How to improve the performance of the piezoelectric vibration energy harvester is a key issue in engineering applications. There are many literature on piezoelectric energy harvesting. The paper places focus on summarizing these literature of mathematical modeling of piezoelectric energy harvesting, ranging from the linear to nonlinear, from early a single mechanical degree to piezoaeroelastic problems.

Experimental Study of a Self-Excited Piezoelectric Energy Harvester

2010 ◽  
Author(s):  
Hu¨seyin Dog˘us¸ Akaydın ◽  
Niell Elvin ◽  
Yiannis Andreopoulos
Keyword(s):  
Electrical Power ◽  
Natural Mode ◽  
Structural Vibrations ◽  
Energy Harvesters ◽  
Flow Energy ◽  
Piezoelectric Energy ◽  
Voltage Output ◽  
Aerodynamic Properties ◽  
Piezoelectric Cantilever ◽  
Measured Strain

In the present experimental work, we explore the possibility of using piezoelectric based fluid flow energy harvesters. These harvesters are self-excited and self-sustained in the sense that they can be used in steady uniform flows. The configuration consists of a piezoelectric cantilever beam with a cylindrical tip body which promotes sustainable, aero-elastic structural vibrations induced by vortex shedding and galloping. The structural and aerodynamic properties of the harvester alter the vibration amplitude and frequency of the piezoelectric beam and thus its electrical output. This paper presents results of energy-harvesting tests with one configuration of such a self-excited piezoelectric harvester using a PZT bimorph. In addition to the electrical voltage output, the strain on the surface of beam close to its clamped tip was also measured The measured strain and voltage output were perfectly correlated in the frequency range containing the first natural mode of vibration of the system. It was observed that about 0.24 mW of electrical power can be attained with this harvester in a uniform flow of 28 m/s.

In situ-grown organo-lead bromide perovskite-induced electroactive γ-phase in aerogel PVDF films: an efficient photoactive material for piezoelectric energy harvesting and photodetector applications

Nanoscale ◽  
2020 ◽  
Vol 12 (13) ◽  
pp. 7214-7230 ◽  
Author(s):  
Suman Kumar Si ◽  
Sarbaranjan Paria ◽  
Sumanta Kumar Karan ◽  
Suparna Ojha ◽  
Amit Kumar Das ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Piezoelectric Energy Harvesting ◽  
Unique Combination ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Lead Bromide

The unique combination of piezoelectric energy harvesters and light detectors progressively strengthens their application in the development of modern electronics.

Sign in / Sign up

Export Citation Format

Share Document