scholarly journals Dynamic Response Analysis of a Semi-Submersible Floating Wind Turbine in Combined Wave and Current Conditions Using Advanced Hydrodynamic Models

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5820 ◽  
Author(s):  
Takeshi Ishihara ◽  
Yuliang Liu

In this study, advanced hydrodynamic models are proposed to predict dynamic response of a floating offshore wind turbine (FOWT) in combined wave and current conditions and validated by laboratory and full-scale semi-submersible platforms. Firstly, hydrodynamic coefficient models are introduced to evaluate the added mass and drag coefficients in a wide range of Reynolds numbers. An advanced hydrodynamic model is then proposed to calculate the drag force of cylinder in combined wave and current conditions. The proposed model is validated by the water tank tests in the current-only, wave-only and current-wave conditions and is used to investigate the effect of current on the dynamic response of FOWT. Finally, the full-scale semi-submersible platform used in the Fukushima demonstration project is investigated. It is found that the predicted dynamic responses of platform by the proposed hydrodynamic models are improved by the directional spreading function of the sea wave spectrum and show favorable agreement with the field measurement.

Author(s):  
Tomoaki Utsunomiya ◽  
Iku Sato ◽  
Shigeo Yoshida ◽  
Hiroshi Ookubo ◽  
Shigesuke Ishida

In this paper, dynamic response analysis of a Floating Offshore Wind Turbine (FOWT) with Spar-type floating foundation is presented. The FOWT mounts a 100kW down-wind turbine, and is grid-connected. It was launched at sea on 9th June 2012, and moored on 11th for the purpose of the demonstration experiment. During the experiment, the FOWT was attacked by severe typhoon events twice. Among them, Sanba (international designation: 1216) was the strongest tropical cyclone worldwide in 2012. The central atmospheric pressure was 940 hPa when it was close to the FOWT, and the maximum significant wave height of 9.5m was recorded at the site. In this paper, the dynamic responses of the platform motion, the stresses at the tower sections and the chain tensions during the typhoon event, Sanba (1216), have been analyzed, and compared with the measured data. Through the comparison, validation of the numerical simulation tool (Adams with SparDyn developed by the authors) has been made.


Author(s):  
Chinsu Mereena Joy ◽  
Anitha Joseph ◽  
Lalu Mangal

Demand for renewable energy sources is rapidly increasing since they are able to replace depleting fossil fuels and their capacity to act as a carbon neutral energy source. A substantial amount of such clean, renewable and reliable energy potential exists in offshore winds. The major engineering challenge in establishing an offshore wind energy facility is the design of a reliable and financially viable offshore support for the wind turbine tower. An economically feasible support for an offshore wind turbine is a compliant platform since it moves with wave forces and offer less resistance to them. Amongst the several compliant type offshore structures, articulated type is an innovative one. It is flexibly linked to the seafloor and can move along with the waves and restoring is achieved by large buoyancy force. This study focuses on the experimental investigations on the dynamic response of a three-legged articulated structure supporting a 5MW wind turbine. The experimental investigations are done on a 1: 60 scaled model in a 4m wide wave flume at the Department of Ocean Engineering, Indian Institute of Technology, Madras. The tests were conducted for regular waves of various wave periods and wave heights and for various orientations of the platform. The dynamic responses are presented in the form of Response Amplitude Operators (RAO). The study results revealed that the proposed articulated structure is technically feasible in supporting an offshore wind turbine because the natural frequencies are away from ocean wave frequencies and the RAOs obtained are relatively small.


Author(s):  
Yilun Li ◽  
Shuangxi Guo ◽  
Yue Kong ◽  
Weimin Chen ◽  
Min Li

Abstract As offshore wind turbine is developed toward larger water depth, the dynamics coming from structural and fluid inertia and damping effects of the mooring-line gets more obvious, that makes the response analysis of the large floating wind turbine under wind&wave load more challenging. In this study, the dynamic response of a spar floating wind turbine under random wind and wave loads is examined by the modified FEM simulations. Here an integrated system including flexible multi-bodies such as blades, tower, spar and mooring-lines is considered while the catenary dynamics is involved. The dynamic restoring performance of the catenary mooring-line is analyzed based on the vector equations of 3D curved flexible beam and its numerical simulations. Then the structural responses, e.g. the top tension, structural displacements and stress of the tower and the blade, undergoing random wind&wave loads, are examined. Morevoer, the influences of the catenary dynamics on its restoring performance and the hysteresis behavior are presented. Our numerical results show: the dynamics of mooring-line may significantly increase the top tension, and, particularly, the snap tension could be more than 3 times larger than the quasi-static one. Moreover, the structural response under random wind&wave load gets smaller mainly because of the hysteresis effect coming from the mooring-line dynamics. The floating body displacement at surge frequency is around 20% smaller, and the tower root stress at bending frequency is about 30% smaller than the quasi-static values respectively.


2019 ◽  
Vol 7 (4) ◽  
pp. 115 ◽  
Author(s):  
Yane Li ◽  
Conghuan Le ◽  
Hongyan Ding ◽  
Puyang Zhang ◽  
Jian Zhang

The paper discusses the effects of mooring configurations on the dynamic response of a submerged floating offshore wind turbine (SFOWT) for intermediate water depths. A coupled dynamic model of a wind turbine-tower-floating platform-mooring system is established, and the dynamic response of the platform, tensions in mooring lines, and bending moment at the tower base and blade root under four different mooring configurations are checked. A well-stabilized configuration (i.e., four vertical lines and 12 diagonal lines with an inclination angle of 30°) is selected to study the coupled dynamic responses of SFOWT with broken mooring lines, and in order to keep the safety of SFOWT under extreme sea-states, the pretension of the vertical mooring line has to increase from 1800–2780 kN. Results show that the optimized mooring system can provide larger restoring force, and the SFOWT has a smaller movement response under extreme sea-states; when the mooring lines in the upwind wave direction are broken, an increased motion response of the platform will be caused. However, there is no slack in the remaining mooring lines, and the SFOWT still has enough stability.


Author(s):  
Fasuo Yan ◽  
Cheng Peng ◽  
Jun Zhang ◽  
Dagang Wang

Offshore turbines are gaining attention as means to capture the immense and relatively calm wind resources available over deep waters. A coupled dynamic analysis is required to evaluate the interactions between the wind turbine, floating hull and its mooring system. In this study, a coupled hydro-aero dynamic response analysis of a floating wind turbine system (NREL offshore-5MW baseline wind turbine) is carried out. A numerical code, known as COUPLE, has been extended to collaborate with FAST for the simulation of the dynamic interaction. Two methods were used in the analysis; one is coupled method and the other is limited coupled method. In the coupled method, the two codes are linked at each time step to solve the whole floating system. The limited coupled method assumes wind load is from a turbine installed on top of a fixed base, namely it doesn’t consider real-time configuration of floating carrier at each time step. Coupled technique is also mentioned to integrate the hydro-aero dynamic analysis in this paper. Six-degrees of freedom motion and mooring tensions are presented and compared. The numerical results derived in this study may provide crucial information for the design of a floating wind turbine in the future.


Author(s):  
Lin Li ◽  
Zhen Gao ◽  
Torgeir Moan

This study addresses numerical modeling and time-domain simulations of the lowering operation for installation of an offshore wind turbine monopile (MP) with a diameter of 5.7 m and examines the nonstationary dynamic responses of the lifting system in irregular waves. Due to the time-varying properties of the system and the resulting nonstationary dynamic responses, numerical simulation of the entire lowering process is challenging to model. For slender structures, strip theory is usually applied to calculate the excitation forces based on Morison's formula with changing draft. However, this method neglects the potential damping of the structure and may overestimate the responses even in relatively long waves. Correct damping is particularly important for the resonance motions of the lifting system. On the other hand, although the traditional panel method takes care of the diffraction and radiation, it is based on steady-state condition and is not valid in the nonstationary situation, as in this case in which the monopile is lowered continuously. Therefore, this paper has two objectives. The first objective is to examine the importance of the diffraction and radiation of the monopile in the current lifting model. The second objective is to develop a new approach to address this behavior more accurately. Based on the strip theory and Morison's formula, the proposed method accounts for the radiation damping of the structure during the lowering process in the time-domain. Comparative studies between different methods are presented, and the differences in response using two types of installation vessel in the numerical model are also investigated.


Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2784
Author(s):  
Pei Zhang ◽  
Shugeng Yang ◽  
Yan Li ◽  
Jiayang Gu ◽  
Zhiqiang Hu ◽  
...  

Focusing on the transitional depth offshore area from 50 m to 75 m, types of articulated foundations are proposed for supporting the NREL 5 MW offshore wind turbine. To investigate the dynamic behaviors under various water depths, three articulated foundations were adopted and numerical simulations were conducted in the time domain. An in-house code was chosen to simulate the dynamic response of the articulated offshore wind turbine. The aerodynamic load on rotating blades and the wind pressure load on tower are calculated based on the blade element momentum theory and the empirical formula, respectively. The hydrodynamic load is simulated by 3D potential flow theory. The motions of foundation, the aerodynamic performance of the wind turbine, and the loads on the articulated joint are documented and compared in different cases. According to the simulation, all three articulated offshore wind turbines show great dynamic performance and totally meet the requirement of power generation under the rated operational condition. Moreover, the comparison is based on time histories and spectra among these responses. The result shows that dynamic responses of the shallower one oscillate more severely compared to the other designs.


Sign in / Sign up

Export Citation Format

Share Document