scholarly journals Bi-Directional Power Flow in Switchgear with Static Transfer Switch Applied at Various Renewable Energies

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3187
Author(s):  
Keon-Woo Park ◽  
Chul-Hwan Kim
Keyword(s):  
Communication System ◽  
Power Flow ◽  
Electronic Device ◽  
Test Sequence ◽  
Test Results ◽  
Distributed Generations ◽  
Prototype Development ◽  
Intelligent Electronic Device ◽  
Bidirectional Power Flow ◽  
Actual Test

In this study, we describe the development of a plug-in type of switchgear that can control bidirectional power flow. This switchgear system can connect distributed generations such as photovoltaic and wind turbine generation, and AC and DC loads. The proposed switchgear system consists of an inverter for connecting distributed generations and DC load, a static transfer switch (STS) that can control and interrupt the bidirectional power flow, and an intelligent electronic device (IED) that can control each facility using a communication system. Since the topology inside the switchgear is composed of DC bus, it can be operated as a plug-in type of system that can be used by simply connecting the converters of various distributed generations to the inverter in the developed switchgear system. In this study, we describe the overall structure of the proposed switchgear system and the operation of the components. In addition, prototypes of each facility are developed and the results of building a small testbed are presented. Finally, we verify the operation of the inverter by performing an experiment on the testbed and show that throughout a test sequence the proposed switchgear system works normally. The contributions of this study are the development of a plug-in type of switchgear for AC/DC and the actual test results presented through prototype development and testbed configuration.

Rancang Bangun Piranti Lunak Pengolah Data Pasca Pengujian Terowongan Angin Kecepatan Rendah Indonesia

2016 ◽  
Vol 7 (2) ◽  
pp. 131-138
Author(s):  
Ivransa Zuhdi Pane
Keyword(s):  
Wind Tunnel ◽  
Wind Tunnel Test ◽  
Test Results ◽  
Effective Solution ◽  
Post Processing ◽  
Prototype Development ◽  
Design Activities ◽  
Index Terms ◽  
Test Objects ◽  
Processing Requirement

Data post-processing plays important roles in a wind tunnel test, especially in supporting the validation of the test results and further data analysis related to the design activities of the test objects. One effective solution to carry out the data post-processing in an automated productive manner, and thus eliminate the cumbersome conventional manual way, is building a software which is able to execute calculations and have abilities in presenting and analyzing the data in accordance with the post-processing requirement. Through several prototype development cycles, this work attempts to engineer and realize such software to enhance the overall wind tunnel test activities. Index Terms—software engineering, wind tunnel test, data post-processing, prototype, pseudocode

scholarly journals Stability Evaluation of AC/DC Hybrid Microgrids Considering Bidirectional Power Flow Through the Interlinking Converters

IEEE Access ◽  
2021 ◽  
Vol 9 ◽  
pp. 43876-43888
Author(s):  
Abdelsalam A. Eajal ◽  
Harikrishna Muda ◽  
Adedayo Aderibole ◽  
Mohamed Al Hosani ◽  
Hatem Zeineldin ◽  
...  
Keyword(s):  
Power Flow ◽  
Stability Evaluation ◽  
Flow Through ◽  
Bidirectional Power Flow

scholarly journals Progresses in Analytical Design of Distribution Grids and Energy Storage

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4270
Author(s):  
Gianpiero Colangelo ◽  
Gianluigi Spirto ◽  
Marco Milanese ◽  
Arturo de Risi
Keyword(s):  
Renewable Energy ◽  
Power Flow ◽  
State Of The Art ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Distribution Grid ◽  
Mathematical Methods ◽  
Power Generators ◽  
Bidirectional Power Flow ◽  
Distribution Grids

In the last years, a change in the power generation paradigm has been promoted by the increasing use of renewable energy sources combined with the need to reduce CO2 emissions. Small and distributed power generators are preferred to the classical centralized and sizeable ones. Accordingly, this fact led to a new way to think and design distributions grids. One of the challenges is to handle bidirectional power flow at the distribution substations transformer from and to the national transportation grid. The aim of this paper is to review and analyze the different mathematical methods to design the architecture of a distribution grid and the state of the art of the technologies used to produce and eventually store or convert, in different energy carriers, electricity produced by renewable energy sources, coping with the aleatory of these sources.

scholarly journals Interaction Boundary Determination of Renewable Energy Sources to Estimate System Strength Using the Power Flow Tracing Strategy

2021 ◽  
Vol 13 (3) ◽  
pp. 1569
Author(s):  
Namki Choi ◽  
Byongjun Lee ◽  
Dohyuk Kim ◽  
Suchul Nam
Keyword(s):  
Renewable Energy ◽  
Power Flow ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Test Results ◽  
Boundary Determination ◽  
Actual Interaction ◽  
Power Flow Tracing ◽  
Estimate System

System strength is an important concept in the integration of renewable energy sources (RESs). However, evaluating system strength is becoming more ambiguous due to the interaction of RESs. This paper proposes a novel scheme to define the actual interaction boundaries of RESs using the power flow tracing strategy. Based on the proposed method, the interaction boundaries of RESs were identified at the southwest side of Korea Electric Power Corporation (KEPCO) systems. The test results show that the proposed approach always provides the identical interaction boundaries of RESs in KEPCO systems, compared to the Electric Reliability Council of Texas (ERCOT) method. The consistent boundaries could be a guideline for power-system planners to assess more accurate system strength, considering the actual interactions of the RESs.

Protection Scheme for DC Microgrid Distribution System

2012 ◽  
Vol 614-615 ◽  
pp. 1661-1665
Author(s):  
Ling Hui Deng ◽  
Zhi Xin Wang ◽  
Jian Min Duan
Keyword(s):  
Distribution System ◽  
Cost Efficiency ◽  
Power Flow ◽  
Low Voltage ◽  
Dc Microgrid ◽  
Protection Scheme ◽  
High Level ◽  
Bidirectional Power Flow ◽  
Efficiency And Reliability ◽  
Laboratory Prototype

The low voltage DC (LVDC) distribution system is a new concept and a promising technology to be used in the future smart distribution system having high level cost-efficiency and reliability. In this paper, a low-voltage (LV) DC microgrid protection system design is proposed. Usually, an LVDC microgrid must be connected to an ac grid through converters with bidirectional power flow and, therefore, a different protection scheme is needed. This paper describes practical protection solutions for the LVDC network and an LVDC system laboratory prototype is being experimentally tested by MATLAB/SIMULINK. The results show that it is possible to use available devices to protect such a system. But other problems may arise which needs further study.

The Research of IC Test Based on LTX-77 Test System

2014 ◽  
Vol 496-500 ◽  
pp. 1176-1179
Author(s):  
Li Tan ◽  
Yu Fang
Keyword(s):  
Test Object ◽  
Test System ◽  
Test Method ◽  
Test Results ◽  
Analog Ic ◽  
Test Platform ◽  
Logic Functions ◽  
Actual Test ◽  
Ic Test

LTX-77 test system is a large IC test system that is used for various kinds of analog IC, digital IC and analog digital mixed IC. It can be used to test DC parameters, AC parameters and logic functions. In the paper, the IC test platform is LTX-77 test system. IC ADC0804 was tested as the test object. The test method of IC is described in the view of actual test. The test results show that the test system is convenient and accurate, which has important practical value for IC manufacturers and users.

Sign in / Sign up

Export Citation Format

Share Document