Techno-Economic Assessment of Utilizing Wind Energy for Hydrogen Production Through Electrolysis

2017 ◽  
Author(s):  
Reza Ziazi ◽  
Kasra Mohammadi ◽  
Navid Goudarzi
Keyword(s):  
Hydrogen Production ◽  
Wind Energy ◽  
Wind Turbines ◽  
Alternative Energy ◽  
Large Scale ◽  
Fossil Fuels ◽  
Combustion Engine ◽  
Economic Assessment ◽  
Large Cities ◽  
North East

Hydrogen as a clean alternative energy carrier for the future is required to be produced through environmentally friendly approaches. Use of renewables such as wind energy for hydrogen production is an appealing way to securely sustain the worldwide trade energy systems. In this approach, wind turbines provide the electricity required for the electrolysis process to split the water into hydrogen and oxygen. The generated hydrogen can then be stored and utilized later for electricity generation via either a fuel cell or an internal combustion engine that turn a generator. In this study, techno-economic evaluation of hydrogen production by electrolysis using wind power investigated in a windy location, named Binaloud, located in north-east of Iran. Development of different large scale wind turbines with different rated capacity is evaluated in all selected locations. Moreover, different capacities of electrolytic for large scale hydrogen production is evaluated. Hydrogen production through wind energy can reduce the usage of unsustainable, financially unstable, and polluting fossil fuels that are becoming a major issue in large cities of Iran.

scholarly journals Optimal Design of Novel Blade Profile for Savonius Wind Turbines

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3484
Author(s):  
Tai-Lin Chang ◽  
Shun-Feng Tsai ◽  
Chun-Lung Chen
Keyword(s):  
Wind Energy ◽  
Drag Force ◽  
Wind Turbines ◽  
Rural Areas ◽  
Large Scale ◽  
Design Method ◽  
Angular Position ◽  
Vertical Axis ◽  
Blade Profile ◽  
Main Concept

Since the affirming of global warming, most wind energy projects have focused on the large-scale Horizontal Axis Wind Turbines (HAWTs). In recent years, the fast-growing wind energy sector and the demand for smarter grids have led to the use of Vertical Axis Wind Turbines (VAWTs) for decentralized energy generation systems, both in urban and remote rural areas. The goals of this study are to improve the Savonius-type VAWT’s efficiency and oscillation. The main concept is to redesign a Novel Blade profile using the Taguchi Robust Design Method and the ANSYS-Fluent simulation package. The convex contour of the blade faces against the wind, creating sufficient lift force and minimizing drag force; the concave contour faces up to the wind, improving or maintaining the drag force. The result is that the Novel Blade improves blade performance by 65% over the Savonius type at the best angular position. In addition, it decreases the oscillation and noise accordingly. This study achieved its two goals.

Simulation of Flow Field on a Large Scale Wind Turbine

2008 ◽  
Author(s):  
I. Janajreh ◽  
C. Ghenai
Keyword(s):  
Flow Field ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Cross Sections ◽  
Large Scale ◽  
Wind Farms ◽  
Operating Characteristics ◽  
Cross Sectional ◽  
Capital Costs

Large scale wind turbines and wind farms continue to evolve mounting 94.1GW of the electrical grid capacity in 2007 and expected to reach 160.0GW in 2010 according to World Wind Energy Association. They commence to play a vital role in the quest for renewable and sustainable energy. They are impressive structures of human responsiveness to, and awareness of, the depleting fossil fuel resources. Early generation wind turbines (windmills) were used as kinetic energy transformers and today generate 1/5 of the Denmark’s electricity and planned to double the current German grid capacity by reaching 12.5% by year 2010. Wind energy is plentiful (72 TW is estimated to be commercially viable) and clean while their intensive capital costs and maintenance fees still bar their widespread deployment in the developing world. Additionally, there are technological challenges in the rotor operating characteristics, fatigue load, and noise in meeting reliability and safety standards. Newer inventions, e.g., downstream wind turbines and flapping rotor blades, are sought to absorb a larger portion of the cost attributable to unrestrained lower cost yaw mechanisms, reduction in the moving parts, and noise reduction thereby reducing maintenance. In this work, numerical analysis of the downstream wind turbine blade is conducted. In particular, the interaction between the tower and the rotor passage is investigated. Circular cross sectional tower and aerofoil shapes are considered in a staggered configuration and under cross-stream motion. The resulting blade static pressure and aerodynamic forces are investigated at different incident wind angles and wind speeds. Comparison of the flow field results against the conventional upstream wind turbine is also conducted. The wind flow is considered to be transient, incompressible, viscous Navier-Stokes and turbulent. The k-ε model is utilized as the turbulence closure. The passage of the rotor blade is governed by ALE and is represented numerically as a sliding mesh against the upstream fixed tower domain. Both the blade and tower cross sections are padded with a boundary layer mesh to accurately capture the viscous forces while several levels of refinement were implemented throughout the domain to assess and avoid the mesh dependence.

scholarly journals Optimization of Power and Levelized Cost for Shrouded Small Wind Turbine

Inventions ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 59
Author(s):  
Hasanali Khojasteh ◽  
Younes Noorollahi ◽  
Mojtaba Tahani ◽  
Mehran Masdari
Keyword(s):  
Wind Energy ◽  
Objective Function ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Plants ◽  
Large Scale ◽  
Renewable Energies ◽  
Levelized Cost ◽  
Small Wind Turbines ◽  
Input Parameters

Nowadays, by increasing energy demand and considering the importance of environmental issues in recent decades, the use of renewable energies is expanding. Among renewable energies, wind power and its technology are growing and evolving more rapidly. Resource assessment in Iran has revealed the significant potential of wind energy around the country. To further develop wind energy in the country and create large-scale wind power plants, the consideration of distributed power generation using small wind turbines for applications in agricultural and residential use is needed. Conventional small wind turbines and small wind lens turbines have been developed in recent years. In this research project, a small wind lens turbine is designed. The advantages of this turbine are an increased production capacity and reduced cut-in speed and noise pollution. In this study, a lens (or shroud) is added to a small turbine, and the maximized annual energy production (AEP) and minimization of the levelized cost of energy (LCOE) are modeled. We applied the NSGA-II algorithm for optimization to find the best answer. The input parameters in the objective function of the AEP are cut-in, cut-out, rated speeds, scale factor, and shape factor. Additionally, the input parameters in the objective function of the LCOE are the power production, initial capital cost, annual operating expenses, and balance of energy. The results indicate that installing a wind lens turbine in Kish Island led to an LCOE decrease of 56% on average, and we can see an 83% increase in the AEP. In the Firoozkooh area, an average reduction of 59% in the LCOE and 74% increase in the AEP for a wind lens turbine is observed.

scholarly journals Evaluating the Environmental Performance of Solar Energy Systems Through a Combined Life Cycle Assessment and Cost Analysis

2019 ◽  
Vol 11 (9) ◽  
pp. 2539 ◽  
Author(s):  
Maria Milousi ◽  
Manolis Souliotis ◽  
George Arampatzis ◽  
Spiros Papaefthimiou
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Large Scale ◽  
Fossil Fuels ◽  
Energy Systems ◽  
Economic Assessment ◽  
Raw Material ◽  
Solar Thermal ◽  
Multiple Perspectives ◽  
Environmental Implications

The paper presents a holistic evaluation of the energy and environmental profile of two renewable energy technologies: Photovoltaics (thin-film and crystalline) and solar thermal collectors (flat plate and vacuum tube). The selected renewable systems exhibit size scalability (i.e., photovoltaics can vary from small to large scale applications) and can easily fit to residential applications (i.e., solar thermal systems). Various technical variations were considered for each of the studied technologies. The environmental implications were assessed through detailed life cycle assessment (LCA), implemented from raw material extraction through manufacture, use, and end of life of the selected energy systems. The methodological order followed comprises two steps: i. LCA and uncertainty analysis (conducted via SimaPro), and ii. techno-economic assessment (conducted via RETScreen). All studied technologies exhibit environmental impacts during their production phase and through their operation they manage to mitigate significant amounts of emitted greenhouse gases due to the avoided use of fossil fuels. The life cycle carbon footprint was calculated for the studied solar systems and was compared to other energy production technologies (either renewables or fossil-fuel based) and the results fall within the range defined by the global literature. The study showed that the implementation of photovoltaics and solar thermal projects in areas with high average insolation (i.e., Crete, Southern Greece) can be financially viable even in the case of low feed-in-tariffs. The results of the combined evaluation provide insight on choosing the most appropriate technologies from multiple perspectives, including financial and environmental.

Circulation Control Applied to Wind Turbines

2009 ◽  
Author(s):  
David McGrain ◽  
Gerald M. Angle ◽  
Jay P. Wilhelm ◽  
Emily D. Pertl ◽  
James E. Smith
Keyword(s):  
Wind Energy ◽  
Wind Turbines ◽  
Power Output ◽  
Alternative Energy ◽  
Vertical Axis ◽  
Limiting Factor ◽  
Circulation Control ◽  
Bird Populations ◽  
Horizontal Axis Wind Turbines ◽  
The Impact

The recent rise in fuel costs and global warming concerns have re-invigorated the search for alternative energy sources. Harnessing energy from the wind is a logical alternative; however the cost and efficiency of current wind turbines is a limiting factor. The use of an augmented Vertical Axis Wind Turbines (VAWTs) may become the superior choice to the more common Horizontal Axis Wind Turbines (HAWTs) that are usually associated with the harvesting of wind energy. HAWTs operate on the same principles as large airplane propellers, while VAWTs operate on lift and/or drag principles like an airplane wing or a sail on a boat. VAWTs are currently being investigated for use with circulation control to increase their potential power output. In this paper, two topics will be presented, a comparison between VAWTs and HAWTs for rotor diameter versus key turbine aspects and the impact of VAWTs on environmental concerns, such as bat and bird populations. The Center for Industrial Research Applications (CIRA) at West Virginia University (WVU) is currently developing a concept utilizing circulation control to increase the lift to drag ratio, maximizing the beneficial forces on the VAWT blade, allowing for improved wind energy production. For the comparison between VAWTs and HAWTs, there are currently 14 companies with a total of 34 wind turbines variations representing VAWTs and 11 companies with a total of 40 wind turbines representing HAWTs. Trend studies of VAWT and HAWT diameters to cut-in-speed, rated velocity, max velocity, power output (<100 kW), and power output (≥100 kW) were created to show the potential of VAWTs. A growing concern with wind energy is the impact on bat and bird populations. It is currently believed that VAWTs reduce the impact of wind energy by altering the interaction with the wind. If these benefits can be proven, then not only are VAWTs potentially more economical, but even more eco-friendly.

Large Scale Hydrogen Production from Wind Energy in Patagonia, Argentina

2004 ◽  
Vol 28 (5) ◽  
pp. 565-575
Author(s):  
Kai Mönnich ◽  
Thomas Neumann ◽  
Martin Strack ◽  
Holger Braess ◽  
Klaus Scheuerer
Keyword(s):  
Hydrogen Production ◽  
Wind Energy ◽  
Large Scale

scholarly journals Perancangan dan Perhitungan Sudu Turbin Angin Horisontal NACA 4412 Variasi Sudut Serang Menggunakan Simulasi BEM

2020 ◽  
Vol 8 (2) ◽  
pp. 34-37
Author(s):  
Gian Roni Ignatius ◽  
Agus Sugiri ◽  
Ahmad Suudi
Keyword(s):  
Wind Energy ◽  
Wind Turbines ◽  
Fossil Fuels ◽  
Mechanical Energy ◽  
Angle Of Attack ◽  
Electrical Energy ◽  
Shaft Speed ◽  
A Value ◽  
Mechanical Rotation ◽  
Main Material

The need for electricity in Indonesia becoming increasingly part of people's needs. Fossil fuels suchas oil and coal used as the main material for producing electrical energy the more limitedavailability, especially in its use of fossil fuels that pollute the environment. Wind energy is arenewable energy source that could potentially be developed. Wind energy is clean and does notpollute the environment in utilization into mechanical or electrical energy. The conversion of windenergy into electrical energy by converting this energy into mechanical rotation. In the wind energyutilization process made a tool to convert wind energy into electrical energy, that is windturbines.Wind turbine or windmill is a tool for converting wind energy. Wind turbines transformkinetic energy into mechanical energy in the form of a round shaft. Shaft speed is then used to rotatethe dynamo or a generator which produces electricity. The research was carried out on a horizontalaxis wind turbine NACA 4412, diameter 1 m, the number of blades 3 pieces and variations in windspeed 2-8 m / s. Results showed the greatest lift (CL) at 14o angle of attack with a value of 1.583.The driving force of the smallest (CD) at an angle of attack -4o to 2o with a value of 0.008. Value CL/ CD was found in the angle of attack of 6o with a value of 93.057. The maximum power generatedby 484.63 Watt. Wind speed, the number of blades, angle of attack and the election of the airfoileffect on the generated power.Keywords : wind energy, wind turbines, airfoil NACA 4412.

scholarly journals Systematic review and perspective on the progress of algal biofuels

2021 ◽  
Vol 257 ◽  
pp. 03008
Author(s):  
Muxin Hu ◽  
Dichen Zhao ◽  
Qiuchi Jin ◽  
Hanrui Li ◽  
Wenmin Wang
Keyword(s):  
Alternative Energy ◽  
Large Scale ◽  
Fossil Fuels ◽  
Economic Benefits ◽  
Scale Production ◽  
Practical Application ◽  
Algal Biofuel ◽  
Algal Biofuels ◽  
Energy Field ◽  
Algae Biofuels

In recognition of the increasing demand of energy and the worsening environmental problems linked with fossil fuels usage, algal biofuel has been proposed as one of the alternative energy sources. It has become one of the hottest topics in renewable energy field in the new century, especially over the past decade. In this review, we summarized the characteristics of different types of algae biofuels. Besides, an in-depth evaluation of the systematic cultivation and practical application of algae have been conducted. Although algal biofuel has a great potential, its unacceptably high cost limits the large-scale industrialization. In order to resolve such restrictions, feasible methods of improving the large scale production and practical application of algal biofuels are proposed. Future efforts should be focused not only on the cost reduction and innovation techniques, but also towards high value by-products to maximize economic benefits. Our results are dedicated to provide valuable references for subsequent research and guidelines on algae biofuels field.

scholarly journals The Kinetic Energy Budget of the Atmosphere (KEBA) model 1.0: a simple yet physical approach for estimating regional wind energy resource potentials that includes the kinetic energy removal effect by wind turbines

2020 ◽  
Vol 13 (10) ◽  
pp. 4993-5005
Author(s):  
Axel Kleidon ◽  
Lee M. Miller
Keyword(s):  
Kinetic Energy ◽  
Wind Energy ◽  
Energy Budget ◽  
Wind Turbines ◽  
Large Scale ◽  
Energy Resource ◽  
Wind Farms ◽  
Energy Yield ◽  
Wind Speeds ◽  
Kinetic Energy Budget

Abstract. With the current expansion of wind power as a renewable energy source, wind turbines increasingly extract kinetic energy from the atmosphere, thus impacting its energy resource. Here, we present a simple, physics-based model (the Kinetic Energy Budget of the Atmosphere; KEBA) to estimate wind energy resource potentials that explicitly account for this removal effect. The model is based on the regional kinetic energy budget of the atmospheric boundary layer that encloses the wind farms of a region. This budget is shaped by horizontal and vertical influx of kinetic energy from upwind regions and the free atmosphere above, as well as the energy removal by the turbines, dissipative losses due to surface friction and wakes, and downwind outflux. These terms can be formulated in a simple yet physical way, yielding analytic expressions for how wind speeds and energy yields are reduced with increasing deployment of wind turbines within a region. We show that KEBA estimates compare very well to the modelling results of a previously published study in which wind farms of different sizes and in different regions were simulated interactively with the Weather Research and Forecasting (WRF) atmospheric model. Compared to a reference case without the effect of reduced wind speeds, yields can drop by more than 50 % at scales greater than 100 km, depending on turbine spacing and the wind conditions of the region. KEBA is able to reproduce these reductions in energy yield compared to the simulated climatological means in WRF (n=36 simulations; r2=0.82). The kinetic energy flux diagnostics of KEBA show that this reduction occurs because the total yield of the simulated wind farms approaches a similar magnitude as the influx of kinetic energy. Additionally, KEBA estimates the slowing of the region's wind speeds, the associated reduction in electricity yields, and how both are due to the depletion of the horizontal influx of kinetic energy by the wind farms. This limits typical large-scale wind energy potentials to less than 1 W m−2 of surface area for wind farms with downwind lengths of more than 100 km, although this limit may be higher in windy regions. This reduction with downwind length makes these yields consistent with climate-model-based idealized simulations of large-scale wind energy resource potentials. We conclude that KEBA is a transparent and informative modelling approach to advance the scientific understanding of wind energy limits and can be used to estimate regional wind energy resource potentials that account for the depletion of wind speeds.

Sign in / Sign up

Export Citation Format

Share Document