scholarly journals Research on the Correction Method of the Capillary End Effect of the Relative Permeability Curve of the Steady State

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4528
Author(s):  
Yanyan Li ◽  
Shuoliang Wang ◽  
Zhihong Kang ◽  
Qinghong Yuan ◽  
Xiaoqiang Xue ◽  
...  
Keyword(s):  
Steady State ◽  
Pressure Drop ◽  
Relative Permeability ◽  
Stability Factor ◽  
End Effect ◽  
Relative Permeability Curve ◽  
Steady State Method ◽  
State Method ◽  
The Impact ◽  
Capillary End Effect

Relative permeability curve is a key factor in describing the characteristics of multiphase flow in porous media. The steady-state method is an effective method to measure the relative permeability curve of oil and water. The capillary discontinuity at the end of the samples will cause the capillary end effect. The capillary end effect (CEE) affects the flow and retention of the fluid. If the experimental design and data interpretation fail to eliminate the impact of capillary end effects, the relative permeability curve may be wrong. This paper proposes a new stability factor method, which can quickly and accurately correct the relative permeability measured by the steady-state method. This method requires two steady-state experiments at the same proportion of injected liquid (wetting phase and non-wetting phase), and two groups of flow rates and pressure drop data are obtained. The pressure drop is corrected according to the new relationship between the pressure drop and the core length. This new relationship is summarized as a stability factor. Then the true relative permeability curve that is not affected by the capillary end effect can be obtained. The validity of the proposed method is verified against a wide range of experimental results. The results emphasize that the proposed method is effective, reliable, and accurate. The operation steps of the proposed method are simple and easy to apply.

Multiphase Flow Under Heterogeneous Wettability Conditions Studied by Special Core Analysis and Pore-Scale Imaging

SPE Journal ◽  
2019 ◽  
Vol 24 (03) ◽  
pp. 1234-1247 ◽  
Author(s):  
Shuangmei Zou ◽  
Ryan T. Armstrong
Keyword(s):  
Multiphase Flow ◽  
Relative Permeability ◽  
Flow Regimes ◽  
Wettability Alteration ◽  
Core Analysis ◽  
Pore Scale ◽  
End Effect ◽  
The Impact ◽  
Capillary End Effect ◽  
Special Core Analysis

Summary Wettability is a major factor that influences multiphase flow in porous media. Numerous experimental studies have reported wettability effects on relative permeability. Laboratory determination for the impact of wettability on relative permeability continues to be a challenge because of difficulties with quantifying wettability alteration, correcting for capillary-end effect, and observing pore-scale flow regimes during core-scale experiments. Herein, we studied the impact of wettability alteration on relative permeability by integrating laboratory steady-state experiments with in-situ high-resolution imaging. We characterized wettability alteration at the core scale by conventional laboratory methods and used history matching for relative permeability determination to account for capillary-end effect. We found that because of wettability alteration from water-wet to mixed-wet conditions, oil relative permeability decreased while water relative permeability slightly increased. For the mixed-wet condition, the pore-scale data demonstrated that the interaction of viscous and capillary forces resulted in viscous-dominated flow, whereby nonwetting phase was able to flow through the smaller regions of the pore space. Overall, this study demonstrates how special-core-analysis (SCAL) techniques can be coupled with pore-scale imaging to provide further insights on pore-scale flow regimes during dynamic coreflooding experiments.

An Experimental Investigation of High and Low Salinity Waterflood Displacement Under the Steady-State Condition

2021 ◽  
Author(s):  
Abdulla Aljaberi ◽  
Seyed Amir Farzaneh ◽  
Shokoufeh Aghabozorgi ◽  
Mohammad Saeid Ataei ◽  
Mehran Sohrabi
Keyword(s):  
Steady State ◽  
Numerical Simulations ◽  
Relative Permeability ◽  
High Salinity ◽  
Unsteady State ◽  
Dispersion Effect ◽  
Low Salinity ◽  
Steady State Method ◽  
State Method ◽  
Relative Permeability Curves

Abstract Oil recovery by low salinity waterflood is significantly affected by fluid-fluid interaction through the micro-dispersion effect. This interaction influences rock wettability and relative permeability functions. Therefore, to gain a better insight into multiphase flow in porous media and perform numerical simulations, reliable relative permeability data is crucial. Unsteady-state or steady-state displacement methods are commonly used in the laboratory to measure water-oil relative permeability curves of a core sample. Experimentally, the unsteady-state core flood technique is more straightforward and less time-consuming compared to the steady-state method. However, the obtained data is limited to a small saturation range, and the associated uncertainty is not negligible. On the other hand, the steady-state method provides a more accurate dataset of two-phase relative permeability needed in the reservoir simulator for a reliable prediction of the high salinity and low salinity waterflood displacement performance. Considering the limitations of the unsteady state method, steady-state high salinity and low salinity brine experiments waterflood experiments were performed to compare the obtained relative permeability curves. The experiments were performed on a carbonate reservoir sample using a live reservoir crude oil under reservoir conditions. The test was designed so that the production and pressure drop curve covers a wider saturation range and provides enough data for analysis. Consequently, reliable relative permeability functions were obtained, initially, for a better comparison and prediction of the high salinity and the low salinity waterflood injections and then, to quantify the effect of low salinity waterflood under steady-state conditions. The results confirm the difference in relative permeability curves between high salinity and low salinity injections due to the micro-dispersion effect, which caused a decrease in water relative permeability and an increase in the oil relative permeability. These results also proved that low salinity brine can change the rock wettability from oil-wet or mixed-wet to more water-wet conditions. Furthermore, the obtained relative permeability curves extend across a substantial saturation range, making it valuable information required for numerical simulations. To the best of our knowledge, the reported data in this work is a pioneer in quantifying the impact of low salinity waterflood at steady-state conditions using a reservoir crude oil and reservoir rock, which is of utmost importance for the oil and gas industry.

Application of X-ray Scanner in Measurement of Gas Condensate Relative Permeability Using Steady-State Method

2007 ◽  
Vol 25 (8) ◽  
pp. 1081-1097
Author(s):  
H. S. Al-Hashim ◽  
H. Y. Al-Yousef ◽  
A. Arshad ◽  
S. Z. Jilani ◽  
S. -ur-Rahman ◽  
...  
Keyword(s):  
Steady State ◽  
Relative Permeability ◽  
Gas Condensate ◽  
X Ray ◽  
Steady State Method ◽  
State Method

scholarly journals Comparative Analysis between Dynamic and Quasi-Steady-State Methods at an Urban Scale on a Social-Housing District in Venice

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5164
Author(s):  
Tiziano Dalla Mora ◽  
Lorenzo Teso ◽  
Laura Carnieletto ◽  
Angelo Zarrella ◽  
Piercarlo Romagnoni
Keyword(s):  
Steady State ◽  
Energy Demand ◽  
Energy Use ◽  
Computational Effort ◽  
Quasi Steady State ◽  
Building Stock ◽  
Steady State Method ◽  
State Calculation ◽  
State Method ◽  
The Impact

The residential building stock represents one of the major players in energy use and greenhouse gas emissions; thus, it is fundamental to reduce the energy used. Simulation tools are becoming more and more accurate in compliance with the new requirements both at the single-building and at the district scale, although they are not affordable by non-specialist users such as policymakers. The research concerns the evaluation of the energy demand for space heating for a historical district that is representative of the Italian building stock. The work compares dynamic and specialist-oriented urban scale tools such as Energy Urban Resistance Capacitance Approach (EUReCA) and City Energy Analyst (CEA)) as well as a quasi-steady-state calculation method (Excel spreadsheet), which is more affordable for non-specialist users. The work was carried out to assess the possible deviation of the results between the dynamic and quasi-steady-state calculation methods, as well as to identify any limits and opportunities in the application of the latter procedure, which is currently the official national calculation tool for the implementation of Directive 2010/31/EU. The study shows how the quasi-steady-state method predicts a reliable building energy demand, in line with the results obtained by the two dynamic tools, when considering only geometry and infiltrations as input. However, the limits of the quasi-steady-state method emerge when introducing internal loads, significantly underestimating the energy demand compared to CEA and EUReCA simulations. The results underline the potential application of the quasi-steady-state method to predict energy demand, although dynamics tools are more reliable but far more complex. Major findings through two methods concern the impact of solar heat gains on the overall heating demand at both the single building and the district scale. The different results between the tools provided evidence of a gap in the use of the simplest tool and demonstrated the accuracy and reliability of the proposed approach with a lower computational effort.

scholarly journals A relative permeability model for CBM reservoir

2020 ◽  
Vol 75 ◽  
pp. 2 ◽  
Author(s):  
Zeyang Peng ◽  
Xiangfang Li ◽  
Zheng Sun
Keyword(s):  
Steady State ◽  
Relative Permeability ◽  
Coalbed Methane ◽  
Gas Diffusion ◽  
Flow Channel ◽  
Flow In Porous Media ◽  
Permeability Model ◽  
Coalbed Gas ◽  
Steady State Method ◽  
State Method

Relative permeability is an effective tool for studying multiphase fluid flow in porous media. For conventional reservoirs, a relatively reliable relative permeability curve can be obtained by laboratory core test. But because of the coalbed gas reservoir permeability is low, the stable steady state method will take a very long time, and the operation is relatively complex. For the non-steady state method, the coalbed gas reservoirs are rich in micro nano pore, which causes the strong heterogeneity and gas is easy to break in through the cracks, it makes non-steady displacement experiment very difficult. Also, the experimental results are greatly affected by human factors and computational methods. Therefore, based on the ideal pore structure and the consideration of different displacement mechanisms, the analytical method not only helps to understand the mechanism of gas water two-phase flow, but also is a convenient and practical method. Coalbed methane reservoirs are rich of nano pores, and the percolation process is more complicated due to the water. Consider of the nano pore of the coal, the capillary force’s effect will be more important. The different pressure will cause different flow channel, which will change the permeability. In this paper, the relative permeability model of coalbed methane reservoir has been built which considers the gas diffusion and slippage effect, pore throat structure parameter, water saturation distribution, and gas water interface pressure drop. It can describe the difference flow channel between different pressure.

Measurement and Correlation of Gas Condensate Relative Permeability by the Steady-State Method

SPE Journal ◽  
1996 ◽  
Vol 1 (02) ◽  
pp. 191-202 ◽  
Author(s):  
G.D. Henderson ◽  
A. Danesh ◽  
D.H. Tehrani ◽  
S. Al-Shaidi ◽  
J.M. Peden
Keyword(s):  
Steady State ◽  
Relative Permeability ◽  
Gas Condensate ◽  
Steady State Method ◽  
State Method

Steady State Measurement of Oxygenation Capacity

1985 ◽  
Vol 17 (2-3) ◽  
pp. 303-311
Author(s):  
Kees de Korte ◽  
Peter Smits
Keyword(s):  
Steady State ◽  
Activated Sludge ◽  
Plug Flow ◽  
Usual Method ◽  
Steady State Method ◽  
State Measurement ◽  
Flow Systems ◽  
Air System ◽  
State Method ◽  
Steady State Measurement

The usual method for OC measurement is the non-steady state method (reaeration) in tapwater or, sometimes, in activated sludge. Both methods are more or less difficult and expensive. The steady state method with activated sludge is presented. Fundamentals are discussed. For complete mixed aeration tanks, plug flow systems with diffused air aeration and carousels the method is described more in detail and the results of measurements are presented. The results of the steady state measurements of the diffused air system are compared with those of the reaeration method in tapwater. The accuracy of the measurements in the 3 systems is discussed. Measurements in other aeration systems are described briefly. It is concluded that the steady state OC measurement offers advantages in comparison with the non-steady state method and is useful for most purposes.

Sign in / Sign up

Export Citation Format

Share Document