scholarly journals Research on Economic and Operating Characteristics of Hydrogen Fuel Cell Cars Based on Real Vehicle Tests

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7856
Author(s):  
Zhijie Duan ◽  
Luo Zhang ◽  
Lili Feng ◽  
Shuguang Yu ◽  
Zengyou Jiang ◽  
...  
Keyword(s):  
Fuel Cell ◽  
High Efficiency ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Hydrogen Fuel Cell ◽  
Operating Characteristics ◽  
Passenger Cars ◽  
Passenger Car ◽  
Hydrogen Consumption ◽  
Hydrogen Emission

With the increase of the requirement for the economy of vehicles and the strengthening of the concept of environmental protection, the development of future vehicles will develop in the direction of high efficiency and cleanliness, and the current power system of vehicles based on traditional fossil fuels will gradually transition to hybrid power. As an essential technological direction for new energy vehicles, the development of fuel cell passenger vehicles is of great significance in reducing transportation carbon emissions, stabilizing energy supply, and maintaining the sustainable development of the automotive industry. To study the fuel economy of a passenger car with the proton exchange membrane fuel cell (PEMFC) during the operating phase, two typical PEMFC passenger cars, test vehicles A and B, were compared and analyzed. The hydrogen consumption and hydrogen emission under two operating conditions, namely the different steady-state power and the Chinese Vehicle Driving Conditions-Passenger Car cycle, were tested. The test results show the actual hydrogen consumption rates of vehicle A and vehicle B are 9.77 g/kM and 8.28 g/kM, respectively. The average hydrogen emission rates for vehicle A and vehicle B are 1.56 g/(kW·h) and 5.40 g/(kW·h), respectively. By comparing the hydrogen purge valve opening time ratio, the differences between test vehicles A and B in control strategy, hydrogen consumption, and emission rate are analyzed. This study will provide reference data for China to study the economics of the operational phase of PEMFC vehicles.

scholarly journals Research on Hydrogen Consumption and Driving Range of Hydrogen Fuel Cell Vehicle under the CLTC-P Condition

2021 ◽  
Vol 13 (1) ◽  
pp. 9
Author(s):  
Zhijie Duan ◽  
Nan Mei ◽  
Lili Feng ◽  
Shuguang Yu ◽  
Zengyou Jiang ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Operating Conditions ◽  
Test Method ◽  
Fuel Cell Vehicle ◽  
Test Time ◽  
Fuel Cell Vehicles ◽  
Hydrogen Fuel Cell ◽  
Hydrogen Consumption ◽  
Vehicle Operation ◽  
Fundamental Reason

Hydrogen consumption and mileage are important economic indicators of fuel cell vehicles. Hydrogen consumption is the fundamental reason that restricts mileage. Since there are few quantitative studies on hydrogen consumption during actual vehicle operation, the high cost of hydrogen consumption in outdoor testing makes it impossible to guarantee the accuracy of the test. Therefore, this study puts forward a test method based on the hydrogen consumption of fuel cell vehicles under CLTC-P operating conditions to test the hydrogen consumption of fuel cell vehicles per 100 km. Finally, the experiment shows that the mileage calculated by hydrogen consumption has a higher consistency with the actual mileage. Based on this hydrogen consumption test method, the hydrogen consumption can be accurately measured, and the test time and cost can be effectively reduced.

scholarly journals Technical and Commercial Challenges of Proton-Exchange Membrane (PEM) Fuel Cells

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 144
Author(s):  
Abed Alaswad ◽  
Abdelnasir Omran ◽  
Jose Ricardo Sodre ◽  
Tabbi Wilberforce ◽  
Gianmichelle Pignatelli ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
High Efficiency ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Future Research ◽  
Fuel Cell Performance ◽  
Research Activities

This review critically evaluates the latest trends in fuel cell development for portable and stationary fuel cell applications and their integration into the automotive industry. Fast start-up, high efficiency, no toxic emissions into the atmosphere and good modularity are the key advantages of fuel cell applications. Despite the merits associated with fuel cells, the high cost of the technology remains a key factor impeding its widespread commercialization. Therefore, this review presents detailed information into the best operating conditions that yield maximum fuel cell performance. The paper recommends future research geared towards robust fuel cell geometry designs, as this determines the cell losses, and material characterization of the various cell components. When this is done properly, it will support a total reduction in the cost of the cell which in effect will reduce the total cost of the system. Despite the strides made by the fuel cell research community, there is a need for public sensitization as some people have reservations regarding the safety of the technology. This hurdle can be overcome if there is a well-documented risk assessment, which also needs to be considered in future research activities.

scholarly journals Modelling of Humidity Dynamics for Open-Cathode Proton Exchange Membrane Fuel Cell

2021 ◽  
Vol 12 (3) ◽  
pp. 106
Author(s):  
Fengxiang Chen ◽  
Liming Zhang ◽  
Jieran Jiao
Keyword(s):  
Fuel Cell ◽  
Mass Flow ◽  
Proton Exchange Membrane ◽  
Flow Model ◽  
Transport Theory ◽  
Gas Diffusion ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Output Performance ◽  
Exchange Membrane

The durability and output performance of a fuel cell is highly influenced by the internal humidity, while in most developed models of open-cathode proton exchange membrane fuel cells (OC-PEMFC) the internal water content is viewed as a fixed value. Based on mass and energy conservation law, mass transport theory and electrochemistry principles, the model of humidity dynamics for OC-PEMFC is established in Simulink® environment, including the electrochemical model, mass flow model and thermal model. In the mass flow model, the water retention property and oxygen transfer characteristics of the gas diffusion layer is modelled. The simulation indicates that the internal humidity of OC-PEMFC varies with stack temperature and operating conditions, which has a significant influence on stack efficiency and output performance. In order to maintain a good internal humidity state during operation, this model can be used to determine the optimal stack temperature and for the design of a proper control strategy.

scholarly journals Design of Incremental Conductance Sliding Mode MPPT Control Applied by Integrated Photovoltaic and Proton Exchange Membrane Fuel Cell System under Various Operating Conditions for BLDC Motor

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Jehun Hahm ◽  
Hyoseok Kang ◽  
Jaeho Baek ◽  
Heejin Lee ◽  
Mignon Park
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Sliding Mode ◽  
Proton Exchange ◽  
Operating Conditions ◽  
System Control ◽  
Atmospheric Conditions ◽  
Pv Array ◽  
Incremental Conductance ◽  
Exchange Membrane

This paper proposes an integrated photovoltaic (PV) and proton exchange membrane fuel cell (PEMFC) system for continuous energy harvesting under various operating conditions for use with a brushless DC motor. The proposed scheme is based on the incremental conductance (IncCond) algorithm combined with the sliding mode technique. Under changing atmospheric conditions, the energy conversion efficiency of a PV array is very low, leading to significant power losses. Consequently, increasing efficiency by means of maximum power point tracking (MPPT) is particularly important. To manage such a hybrid system, control strategies need to be established to achieve the aim of the distributed system. Firstly, a Matlab/Simulink based model of the PV and PEMFC is developed and validated, as well as the incremental conductance sliding (ICS) MPPT technique; then, different MPPT algorithms are employed to control the PV array under nonuniform temperature and insolation conditions, to study these algorithms effectiveness under various operating conditions. Conventional techniques are easy to implement but produce oscillations at MPP. Compared to these techniques, the proposed technique is more efficient; it produces less oscillation at MPP in the steady state and provides more precise tracking.

Experimental Results of a PEM System Operated on Hydrogen and Reformate

2008 ◽  
Vol 5 (1) ◽  
Author(s):  
M. Minutillo ◽  
E. Jannelli ◽  
F. Tunzio
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Large Scale ◽  
Pem Fuel Cell ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Cell Performance ◽  
Pure Hydrogen ◽  
Test Bed ◽  
Fuel Cell Performance

The main objective of this study is to evaluate the performance of a proton exchange membrane (PEM) fuel cell generator operating for residential applications. The fuel cell performance has been evaluated using the test bed of the University of Cassino. The experimental activity has been focused to evaluate the performance in different operating conditions: stack temperature, feeding mode, and fuel composition. In order to use PEM fuel cell technology on a large scale, for an electric power distributed generation, it could be necessary to feed fuel cells with conventional fuel, such as natural gas, to generate hydrogen in situ because currently the infrastructure for the distribution of hydrogen is almost nonexistent. Therefore, the fuel cell performance has been evaluated both using pure hydrogen and reformate gas produced by a natural gas reforming system.

Theoretical Analysis on the Autothermal Reforming Process of Ethanol as Fuel for a Proton Exchange Membrane Fuel Cell System

2006 ◽  
Vol 4 (4) ◽  
pp. 468-473 ◽  
Author(s):  
Alessandra Perna
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cell ◽  
Cell System ◽  
Autothermal Reforming ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Hydrogen Yield ◽  
Fuel Cell System ◽  
Exchange Membrane

The purpose of this work is to investigate, by a thermodynamic analysis, the effects of the process variables on the performance of an autothermal reforming (ATR)-based fuel processor, operating on ethanol as fuel, integrated into an overall proton exchange membrane (PEM) fuel cell system. This analysis has been carried out finding the better operating conditions to maximize hydrogen yield and to minimize CO carbon monoxide production. In order to evaluate the overall efficiency of the system, PEM fuel cell operations have been analyzed by an available parametric model.

scholarly journals Hydrogen Mobility Europe (H2ME): Vehicle and Hydrogen Refuelling Station Deployment Results

2018 ◽  
Vol 9 (1) ◽  
pp. 2 ◽  
Author(s):  
Peter Speers
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Electric Vehicles ◽  
First Year ◽  
Passenger Cars ◽  
Passenger Car ◽  
Cell Range ◽  
Fuel Cell Electric Vehicles ◽  
Light Vehicle

Hydrogen Mobility Europe (H2ME, 2015–2022) is the largest European Fuel Cells and Hydrogen Joint Undertaking (EU FCH JU)-funded hydrogen light vehicle and infrastructure demonstration. Up until April 2017, the 40 Daimler passenger car fuel cell electric vehicles (FCEVs) and 62 Symbio Fuel Cell-Range Extended Electric Vans (FC-REEV)-vans deployed by the project drove 625,300 km and consumed a total of 7900 kg of hydrogen with no safety incidents. During its first year of operation (to April 2017), the NEL Hydrogen Fueling HRS (hydrogen refuelling station) in Kolding, Denmark dispensed 900 kg of hydrogen, and demonstrated excellent reliability (98.2% availability) with no safety incidents. The average hydrogen refuelling time for passenger cars is comparable to that for conventional vehicles (2–3 min).

scholarly journals Fuel Cell designing with optimal high speed air compressor

2021 ◽  
pp. 29-38
Author(s):  
Nabeel Ahsan ◽  
Mahrukh Mehmood ◽  
Asad A. Zaidi
Keyword(s):  
Fuel Cell ◽  
High Speed ◽  
Proton Exchange Membrane ◽  
Cell System ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Air Compressor ◽  
Different Types ◽  
Input Parameters ◽  
Turbo Compressor

This paper discusses different air management technologies for fuel cell systems. Two different types of compressors are analyzed for Proton-exchange membrane fuel cells (PEMFC). Some important criteria are analyzed thoroughly for the selection of turbo compressor among different types of compressors illustrated with the help of matrix representations. The impacts of various input parameters for Fuel Cell (FC) are also explained thoroughly. Later the numerical modeling of an automobile fuel cell system using a high speed turbo-compressor for air supply is explained. The numerical model incorporates the important input parameters related with air and hydrogen. It also performed energy and mass balances across different components such as pump, fan, heat-exchanger, air compressor and also keeps in consideration the pressure drop across the flow pipes and various mechanical parts. The model is solved to obtain the characteristics of the FC system at different operating conditions. Therefore, it can be concluded that the high speed turbo compressor with a turbo-expander can have significant effects on the overall system power and efficiency.

scholarly journals Electrochemical Performance Improvement of the Catalyst of the Methanol Micro-Fuel Cell Using Carbon Nanotubes

2019 ◽  
Author(s):  
Mohammad Kazemi Nasrabadi ◽  
Amir Ebrahimi-Moghadam ◽  
Mohammad Hosein Ahmadi ◽  
Ravinder Kumar ◽  
Narjes Nabipour
Keyword(s):  
Carbon Nanotubes ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Carbon Black ◽  
Oxidation Reaction ◽  
High Energy ◽  
Proton Exchange ◽  
Operating Conditions ◽  
High Energy Density ◽  
Methanol Oxidation Reaction

Due to low working temperature, high energy density and low pollution, proton exchange fuel cells have been investigated under different operating conditions in different applications. Using platinum catalysts in methanol fuel cells leads to increasing the cost of this kind of fuel cell which is considered as a barrier to the commercialism of this technology. For this reason, a lot of efforts have been made to reduce the loading of the catalyst required on different supports. In this study, carbon black (CB) and carbon nanotubes (CNT) have been used as catalyst supports of the fuel cell as well as using the double-metal combination of platinum-ruthenium (PtRu) as anode electrode catalyst and platinum (Pt) as cathode electrode catalyst. The performance of these two types of electro-catalyst in the oxidation reaction of methanol has been compared based on electrochemical tests. Results showed that the carbon nanotubes increase the performance of the micro-fuel cell by 37% at maximum power density, compared to the carbon black. Based on thee-electrode tests of chronoamperometry and voltammetry, it was found that the oxidation onset potential of methanol for CNT has been around 20% less than CB, leading to the kinetic improvement of the oxidation reaction. The current density of methanol oxidation reaction increased up to 62% in CNT sample compared to CB supported one, therefore the active electrochemical surface area of the catalyst has been increased up to 90% by using CNT compared to CB which shows the significant rise of the electrocatalytic activity in CNT supported catalyst. Moreover, the resistance of the CNT supported sample to poisonous intermediate species has been found 3% more than CB supported one. According to the chronoamperometry test results, it was concluded that the performance and sustainability of the CNT electro-catalyst show remarkable improvement compared to CB electro-catalyst in the long term.

Sign in / Sign up

Export Citation Format

Share Document