scholarly journals The Possibility of Generating Electricity Using Small-Scale Wind Turbines and Solar Photovoltaic Systems for Households in Northern Cyprus: A Comparative Study

Environments ◽  
2019 ◽  
Vol 6 (4) ◽  
pp. 47 ◽  
Author(s):  
Kassem ◽  
Al Zoubi ◽  
Gökçekuş
Keyword(s):  
Alternative Energy ◽  
Fossil Fuels ◽  
Clean Energy ◽  
Simulation Software ◽  
Performance Ratio ◽  
Small Scale ◽  
Solar Pv ◽  
Pv System ◽  
Urban Regions ◽  
Northern Cyprus

The increased energy demand and related environmental problems caused by burning fossil fuels have raised interest in alternative energy sources. This study investigated the wind characteristics and available wind energy for three urban regions in Northern Cyprus using the Weibull distribution function. The results illustrate that Gazimağusa is the most applicable location for harvesting the kinetic energy of the wind compared to Lefkoşa and Girne. Moreover, the solar potential at a specific location can be analyzed using a different simulation tool. In the present paper, the performance of a rooftop Photovoltaic (PV) system for household buildings in three selected is assessed. Three types of simulation software (PVGIS, PV*SOL, and PVWatts) are used to evaluate the performance of the 6.4 kWp grid-connected rooftop PV system. This study assessed the energy generation, performance ratio and capacity factor for this PV system. The results concluded that PVGIS is an easy, fast, and reliable software tool that can be used for the simulation of a solar PV system in the studied regions. Furthermore, an economic evaluation of renewable systems in the three urban regions is presented. As a result, a small-scale grid-connected solar/wind system that is able to generate electricity with an excellent percentage of clean energy was proposed and developed. The analysis indicates that the proposed PV projects showed significant potential in the studied locations. In addition, the proposed PV system is the most economical option for generating electricity compared to wind systems due to the low electricity prices and of the ability to recover the initial investment. Consequently, it is expected that the simulation results will help in demonstrating the advantages and challenges of installing grid-connected PV systems for households in Northern Cyprus in order to reduce the electricity consumption produced by fossil fuels.

scholarly journals Techno-economic feasibility analysis of a 3-kW PV system installation in Nepal

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Ramhari Poudyal ◽  
Pavel Loskot ◽  
Ranjan Parajuli
Keyword(s):  
Net Present Value ◽  
Meteorological Data ◽  
Electric Energy ◽  
Simulation Software ◽  
Economic Feasibility ◽  
Performance Ratio ◽  
Energy Output ◽  
Solar Pv ◽  
Economic Returns ◽  
Pv System

AbstractThis study investigates the techno-economic feasibility of installing a 3-kilowatt-peak (kWp) photovoltaic (PV) system in Kathmandu, Nepal. The study also analyses the importance of scaling up the share of solar energy to contribute to the country's overall energy generation mix. The technical viability of the designed PV system is assessed using PVsyst and Meteonorm simulation software. The performance indicators adopted in our study are the electric energy output, performance ratio, and the economic returns including the levelised cost and the net present value of energy production. The key parameters used in simulations are site-specific meteorological data, solar irradiance, PV capacity factor, and the price of electricity. The achieved PV system efficiency and the performance ratio are 17% and 84%, respectively. The demand–supply gap has been estimated assuming the load profile of a typical household in Kathmandu under the enhanced use of electric appliances. Our results show that the 3-kWp PV system can generate 100% of electricity consumed by a typical residential household in Kathmandu. The calculated levelised cost of energy for the PV system considered is 0.06 $/kWh, and the corresponding rate of investment is 87%. The payback period is estimated to be 8.6 years. The installation of the designed solar PV system could save 10.33 tons of CO2 emission over its lifetime. Overall, the PV systems with 3 kWp capacity appear to be a viable solution to secure a sufficient amount of electricity for most households in Kathmandu city.

scholarly journals Solar Assisted Power Generation System in Hot Desert Climate: A Cost-Benefit Perspective

2021 ◽  
Author(s):  
Ramzi Alahmadi ◽  
◽  
Kamel Almutairi ◽  
Keyword(s):  
Solar Energy ◽  
Fossil Fuels ◽  
Cost Benefit ◽  
Energy Systems ◽  
Clean Energy ◽  
Economic Feasibility ◽  
Economic Viability ◽  
Solar Pv ◽  
Pv System ◽  
Pv Systems

With the increasing global concerns about greenhouse gas emissions caused by the extensive use of fossil fuels, many countries are investing in the deployment of clean energy sources. The utilization of abundant solar energy is one of the fastest growing deployed renewable sources due its technological maturity and economic competitivity. In addition to report from the National Renewable Energy Laboratory (NREL), many studies have suggested that the maturity of solar energy systems will continue to develop, which will increase their economic viability. The focus of analysis in this paper is countries with hot desert climates since they are the best candidates for solar energy systems. The capital of Saudi Arabia, Riyadh is used as the case study due to the country’s ambitious goals in this field. The main purpose of this study is to comprehensively analyze the stochastic behavior and probabilistic distribution of solar irradiance in order to accurately estimate the expected power output of solar systems. A solar Photovoltaic (PV) module is used for the analysis due to its practicality and widespread use in utility-scale projects. In addition to the use of a break-even analysis to estimate the economic viability of solar PV systems in hot desert climates, this paper estimates the indifference point at which the economic feasibility of solar PV systems is justified, compared with the fossil-based systems. The numerical results show that the break-even point of installing one KW generation capacity of a solar PV system is estimated to pay off after producing 16,827 KWh, compared to 15,422 KWh for the case of fossil-based systems. However, the increased cost of initial investment in solar PV systems deployment starts to be economically justified after producing 41,437 KWh.

scholarly journals A comparison of two automatic solar tracking algorithms

2020 ◽  
Vol 152 ◽  
pp. 02009
Author(s):  
Motlatsi Lehloka ◽  
James Swart ◽  
Pierre Hertzog
Keyword(s):  
Fuzzy Logic ◽  
Fossil Fuels ◽  
Global Climate ◽  
Clean Energy ◽  
The Sun ◽  
Solar Pv ◽  
Pv System ◽  
Pv Module ◽  
Solar Pv System ◽  
Fixed Axis

Due to global climate change as a result of pollution caused by the burning of fossil fuels, the world has changed its view when it comes to power generation. The focus is now more on natural and clean energy, such as solar PV systems. An effective solar PV system is not a simple system, as the sun is not a stationery object. The sun moves from east to west daily and that makes the design and installation of an effective solar PV system challenging for optimal power harvesting. The purpose of this paper is to compare two algorithms (linear regression and fuzzy logic) that are applied to a dual-axis tracker in order to maximize the output power yield that may be obtained from a fixed-axis system. One fixed-axis PV module serves as the baseline for comparing the results of the dual-axis trackers that are controlled by the two algorithms. A key recommendation is to align a PV module perpendicular to the sun from sunrise to sunset using a control algorithm based on fuzzy logic principles in order to extract the maximum amount of available energy.

scholarly journals Designing of a Hybrid Photovoltaic Structure for an Energy-Efficient Street Lightning System Using PVsyst Software

2021 ◽  
Vol 12 (1) ◽  
pp. 45
Author(s):  
Muhammad Tamoor ◽  
Abdul Rauf Bhatti ◽  
Muhammad Farhan ◽  
Sajjad Miran ◽  
Faakhar Raza ◽  
...  
Keyword(s):  
Hybrid System ◽  
Energy Efficient ◽  
Energy Production ◽  
Simulation Software ◽  
Performance Ratio ◽  
Specific Power ◽  
Solar Pv ◽  
Pv System ◽  
Simulation Results ◽  
Utility Grid

With the depletion of traditional fossil fuels, their disastrous impact on the environment and rising costs, renewable energy sources such as photovoltaic (PV) energy are rapidly emerging as sustainable and clean sources of power generation. The performance of photovoltaic systems is based on different factors such as the type of photovoltaic modules, irradiation potential and geographic location. In this research, PVsyst simulation software is used to design and simulate a hybrid photovoltaic system used to operate energy-efficient street lightning system. The simulation is performed to analyze the monthly/annual energy generated (kWh) by the hybrid system and specific power production (kWh/KWp). Additionally, various PV system losses are also investigated. The hybrid PV system has 4 parallel strings, and each string has 13 series-connected (mono crystalline 400 W Canadian Solar) PV modules. The energy storage system consists of 16 Narada (AcmeG 12 V 200) batteries with a nominal capacity of 1600 Ah. The simulation results show that the total annual energy production and specific energy production, were calculated to be 26.68 MWh/year and 1283 kWh/kWp/year, respectively. Simulation results also show the maximum energy injected into the utility grid in the month of June (1.814 MWh) and the minimum energy injected into the utility grid in the month of January (0.848 MWh). The battery cycle state of wear is 84.8%, and the static state of wear is 91.7%. Performance ratio (PR) analysis shows that the highest performance ratio of the hybrid system was 68.2% in December, the lowest performance ratio was 62.7% in May and the annual average performance ratio of a hybrid PV system is 65.57%. After identifying the major source of energy losses, the detailed losses for the whole year were computed and shown by the loss diagrams. To evaluate the cost effectiveness of the proposed system, a simple payback period calculation was performed.

Evaluation of Faults in a DC Grid-Connected Solar Systems of Ships

2020 ◽  
Vol 54 (4) ◽  
pp. 93-99
Author(s):  
Ganesan Karthikeyan ◽  
David Prince Winston ◽  
Ananthan Bhuvanesh ◽  
Kannan Gangatharan
Keyword(s):  
Power Generation ◽  
Fossil Fuels ◽  
Simulation Software ◽  
Shipping Industry ◽  
Solar Pv ◽  
Pv System ◽  
Solar Systems ◽  
Solar Pv System ◽  
Increasing Demand ◽  
The Impact

AbstractFulfilling the increasing demand for electricity is a huge challenge worldwide. At the same time, dependence on fossil fuels for power generation and its enervation is becoming a severe concern as fossil fuels will be unavailable after 25 years. Hence, research needs to be focused on minimizing the dependence on fossil fuels for power generation especially in the shipping industry. This study aims to implement the solar photovoltaic (PV) system in a ship so as to investigate the possible difficulties related to fault detection and islanding protection methods of a direct current (DC)grid-tied solar PV system in a ship. The simulations have been modeled using an Arduino Uno R3 with IC ATMEGA 328P controller in Proteus PCB Design and Simulation software. In faulty conditions, the impact of the faults on the grid is very critical. Hence, it is essential to identify faults immediately and island the grid.

Comparison Position of Solar PV System : College Learning Building South Lampung

2019 ◽  
Author(s):  
Rishal Asri
Keyword(s):  
Electrical Energy ◽  
Performance Ratio ◽  
Solar Pv ◽  
Pv System ◽  
Solar Pv System ◽  
College Learning ◽  
A Performance

Sunlight is energy that can be converted into electrical energy. One of the uses is by applying it to the roof ofthe building. The application in this building has restrictions such as the placement of the PV moduleshorizontally and vertically. In the study comparing the results of energy obtained from the PV system withhorizontal and vertical positions with a standard degree angle in the direction of azimuth sunlight. Positionusing the horizontal produces more energy and reaches a performance ratio of more than 80%.

scholarly journals Performance Analysis of a Grid-Connected Rooftop Solar Photovoltaic System

Electronics ◽  
2019 ◽  
Vol 8 (8) ◽  
pp. 905 ◽  
Author(s):  
Akpolat ◽  
Dursun ◽  
Kuzucuoğlu ◽  
Yang ◽  
Blaabjerg ◽  
...  
Keyword(s):  
Performance Analysis ◽  
Simulation Study ◽  
Alternative Energy ◽  
Sunshine Duration ◽  
Clean Energy ◽  
Photovoltaic System ◽  
Solar Photovoltaic ◽  
Pv System ◽  
Simulation Results ◽  
Rooftop Solar

Turkey is among the countries largely dependent on energy import. This dependency has increased interest in new and alternative energy sources. Installation of rooftop solar photovoltaic systems (RSPSs) in Turkey is increasing continuously regarding geographical and meteorological conditions. This paper presents an insight into the potential situation for Turkey and a simulation study for the RSPS designing and calculation for the faculty building at Marmara University in Istanbul. This simulation study demonstrates that 84.75-kWp grid-connected RSPS can produce remarkable power. The system is performed in detail with the PV*SOL software (Premium 2017 R8 - Test Version, Valentin Software GmbH, Berlin, Germany). Detailed financial and performance analysis of the grid-connected RSPS for faculty building with various parameters is also carried out in this study. According to the simulation results, the system supplies 13.2% of the faculty buildings’ annual electrical energy consumption. The annual savings value of faculty buildings’ electrical consumption is approximately 90,298 kWh energy which costs roughly $7296. A photovoltaic (PV) system installation for the faculty building, which has considerable potential for solar energy and sunshine duration, is indispensable for clean energy requirements and was supported by the simulation results. This paper can be considered to be a basic feasibility study prior to moving on to the implementation project.

scholarly journals The Technical Challenges Facing the Integration of Small-Scale and Large-scale PV Systems into the Grid: A Critical Review

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1443 ◽  
Author(s):  
Abdullah Alshahrani ◽  
Siddig Omer ◽  
Yuehong Su ◽  
Elamin Mohamed ◽  
Saleh Alotaibi
Keyword(s):  
Large Scale ◽  
Distribution Network ◽  
Small Scale ◽  
Energy Access ◽  
Solar Pv ◽  
Pv System ◽  
Pv Systems ◽  
Technical Challenges ◽  
Technical Solutions ◽  
The Impact

Decarbonisation, energy security and expanding energy access are the main driving forces behind the worldwide increasing attention in renewable energy. This paper focuses on the solar photovoltaic (PV) technology because, currently, it has the most attention in the energy sector due to the sharp drop in the solar PV system cost, which was one of the main barriers of PV large-scale deployment. Firstly, this paper extensively reviews the technical challenges, potential technical solutions and the research carried out in integrating high shares of small-scale PV systems into the distribution network of the grid in order to give a clearer picture of the impact since most of the PV systems installations were at small scales and connected into the distribution network. The paper reviews the localised technical challenges, grid stability challenges and technical solutions on integrating large-scale PV systems into the transmission network of the grid. In addition, the current practices for managing the variability of large-scale PV systems by the grid operators are discussed. Finally, this paper concludes by summarising the critical technical aspects facing the integration of the PV system depending on their size into the grid, in which it provides a strong point of reference and a useful framework for the researchers planning to exploit this field further on.

scholarly journals Assessment of Solar PV Potential and Performance of a Household System in Durban North, Durban, South Africa

2021 ◽  
Author(s):  
Williams S. Ebhota ◽  
Pavel Y. Tabakov
Keyword(s):  
South Africa ◽  
System Size ◽  
Performance Ratio ◽  
Solar Pv ◽  
Pv System ◽  
Simulation Tools ◽  
Solar Pv System ◽  
And Performance ◽  
Module Type ◽  
Rooftop Solar

Abstract A rooftop solar photovoltaic (PV) system is an alternative electricity source that is increasingly being used for households. The potential of solar PV is location dependent that needs to be assessed before installation. This study focuses on the assessment of a solar PV potential of a site on coordinates − 29.853762°, 031.00634°, at Glenmore Crescent, Durban North, South Africa. In addition, it evaluates the performance of a 6 kW installed capacity grid-connected rooftop solar PV system to supply electricity to a household. The results, obtained from PV design and simulation tools – PV*SOL, Solargis prospect and pvPlanner, were used to analyse and establish the site and PV system technical viability. The system’s configuration is as follows: load profile - a 2-Person household with 2-children, energy consumption − 3500 kWh, system size − 6 kWp, installation type - roof mount, PV module type - c-Si - monocrystalline silicon, efficiency − 18.9%, orientation of PV modules -Azimuth 0° and Tilt 30°, inverter 95.9% (Euro efficiency), and no transformer. The results show: meteorological parameters - global horizontal irradiation (GHI) 1659.3 kWh/m2, direct normal irradiation (DNI) 1610.6 kWh/m2, air temperature 20.6°C; performance parameters - annual PV energy 8639 kWh, Specific annual yield 1403 kWh/kWp, performance ratio (PR) 74.9%, avoided CO₂ emissions 5662 kg/year, and solar fraction 42.5 %. The analysis and benchmarking of the results show that the proposed solar PV system under the current conditions is technically viable for household electrification in Durban North, South Africa.

Sign in / Sign up

Export Citation Format

Share Document