scholarly journals Evaluation of Water Quality Parameters in Shatt AL-Arab, Southern Iraq, Using Spatial Analysis

Hydrology ◽  
2020 ◽  
Vol 7 (4) ◽  
pp. 79 ◽  
Author(s):  
Zahraa Q. Lateef ◽  
Abdul-Sahib T. Al-Madhhachi ◽  
Dawood E. Sachit
Keyword(s):  
Water Quality ◽  
Spatial Analysis ◽  
Arabian Gulf ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Data Availability ◽  
Water Quality Parameters ◽  
Total Hardness ◽  
Dissolved Solids ◽  
Southern Iraq

The present work illustrates the potential application of techniques of spatial analysis via geographic information systems (GIS) to categorize the distribution of temporal and spatial of water prediction characteristics to determine the water quality parameters of the Shatt Al-Arab River (SAA), southern Iraq. Eight main water quality parameters and three heavy metals were measured from December 2018 to October 2019. The total dissolved solids, chloride, sulfate, and total hardness were compared with previous data that were measured from 2014 to 2018 based on data availability. The geochemical characteristics were also investigated to analyze water quality parameters. The study was performed by selecting eleven stations according to the nature areas of SAA. Water samples were acquired from the eleven stations for four seasons (winter of 2018 through autumn of 2019). Results revealed that total dissolved solids ranged between 950 to 8500 mg/L, total hardness varied from 400 to 2394 mg/L as calcium carbonate (CaCO3), the sulfate ranged from 149 to 1602 mg/L, and chloride ranged from 330 to 3687 mg/L. The results showed that SAA had high salinity with a low hazard of sodicity. The SAA waters mainly fall below the Dolomite-Magnesite tie-lines which indicated the dissolution of carbonate rocks. This research also found that the study area confined from Al-Maqal station to Abu Flus port station where the salty marine water coming from the Arabian Gulf remains for longer periods. The SAA is not suitable for drinking and irrigation water according to Iraqi and World Health Organization (WHO) standards. This study suggested building a blocking dam downstream of the SAA to prevent salty water from coming back from Arabian Gulf.

scholarly journals Modeling Water Quality Parameters Using Data-Driven Models, a Case Study Abu-Ziriq Marsh in South of Iraq

Hydrology ◽  
2019 ◽  
Vol 6 (1) ◽  
pp. 24 ◽  
Author(s):  
Mustafa Al-Mukhtar ◽  
Fuaad Al-Yaseen
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Performance Criteria ◽  
Total Hardness ◽  
Efficiency Coefficient ◽  
Dissolved Solids ◽  
South Of Iraq

Total dissolved solids (TDS) and electrical conductivity (EC) are important parameters in determining water quality for drinking and agricultural water, since they are directly associated to the concentration of salt in water and, hence, high values of these parameters cause low water quality indices. In addition, they play a significant role in hydrous life, effective water resources management and health studies. Thus, it is of critical importance to identify the optimum modeling method that would be capable to capture the behavior of these parameters. The aim of this study was to assess the ability of using three different models of artificial intelligence techniques: Adaptive neural based fuzzy inference system (ANFIS), artificial neural networks (ANNs) and Multiple Regression Model (MLR) to predict and estimate TDS and EC in Abu-Ziriq marsh south of Iraq. As so, eighty four monthly TDS and EC values collected from 2009 to 2018 were used in the evaluation. The collected data was randomly split into 75% for training and 25% for testing. The most effective input parameters to model TDS and EC were determined based on cross-correlation test. The three performance criteria: correlation coefficient (CC), root mean square error (RMSE) and Nash–Sutcliffe efficiency coefficient (NSE) were used to evaluate the performance of the developed models. It was found that nitrate (NO3), calcium (Ca+2), magnesium (Mg+2), total hardness (T.H), sulfate (SO4) and chloride (Cl−1) are the most influential inputs on TDS. While calcium (Ca+2), magnesium (Mg+2), total hardness (T.H), sulfate (SO4) and chloride (Cl−1) are the most effective on EC. The comparison of the results showed that the three models can satisfactorily estimate the total dissolved solids and electrical conductivity, but ANFIS model outperformed the ANN and MLR models in the three performance criteria: RMSE, CC and NSE during the calibration and validation periods in modeling the two water quality parameters. ANFIS is recommended to be used as a predictive model for TDS and EC in the Iraqi marshes.

scholarly journals Cladoceran abundance in relation to water quality parameters of Chakki Talab, Bodhan, Telangana

2018 ◽  
Vol 8 (01) ◽  
Author(s):  
Vasudha Lingampally ◽  
V.R. Solanki ◽  
D. L. Anuradha ◽  
Sabita Raja
Keyword(s):  
Water Quality ◽  
Dissolved Oxygen ◽  
Oxygen Demand ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Biological Oxygen Demand ◽  
Water Quality Parameters ◽  
Total Alkalinity ◽  
Total Hardness ◽  
One Year

In the present study an attempt has been made to evaluate water quality and related density of Cladocerans for a period of one year, October 2015 to September 2016. Water quality parameters such as temperature, PH, total dissolved solids, dissolved oxygen, biological oxygen demand, total alkalinity, total hardness, chlorides, phosphates, and nitrates are presented here to relate with the abundance of Cladocerans. The Cladoceran abundance reflects the eutrophic nature of the Chakki talab.

scholarly journals RESPONSE SURFACE METHODOLOGY VIA DESIRABILITY FUNCTION TECHNIQUES FOR OPTIMIZING CORRELATED RESPONSES OF ELECTRICAL CONDUCTIVITY AND TOTAL DISSOLVED SOLIDS OF SELECTED BOREHOLE WATER

2020 ◽  
Vol 4 (3) ◽  
pp. 333-342
Author(s):  
KEHINDE MONSURU YUSUFF ◽  
M. Lawal ◽  
A. T. Audu ◽  
O. A. Wale-Orojo
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Water Source ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Physical Parameters ◽  
Dissolved Solids

The health benefits in the description and observation of quantitative contents of quality parameters present or contained in any water source cannot be underestimated as they determine selection of best choice from available water sources for different intended uses as well as resource consumption. It also helps to compare the observed quantity of the quality with the acceptable standards or limits to get desired results. Physical parameters like pH, temperature, electrical conductivity (EC) and total dissolved solids (TDS) among others are determined by present of other chemical properties like Cations (Mg2+, Ca2+, Na+, etc), Anions (Cl-, NO3-, SO42+, etc), heavy metals and other dissolved materials during the course of its formation in different proportions and amounts. This study observed EC and TDS of 20 selected boreholes as two close and correlated water quality parameters as well as two of the major water quality parameters that account for overall quality of any water source, despite their different quantitative contents and physical features, they are likely determined by the same set of cations and anions with similar constraint equations. In contrast to linear programming, multiple criteria optimization models were fitted for EC and TDS using Response Surface Methodology via desirability techniques, optimal values obtained in this case measured against several criteria are found to lie between acceptable standards limits for drinking water, other numerical values and descriptive features in the final results reflect that the response equations obtained were well fitted.

scholarly journals Researchof Water Quality and its Chemical Parameters by Titration Method and Instrumenal Method

2019 ◽  
Vol 8 (6S4) ◽  
pp. 871-874
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Water Samples ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Quality Analysis ◽  
Instrumental Method ◽  
Titration Method ◽  
Dissolved Solids

he water quality analysis is an important aspect in understanding the behavior of water and what can they be used for. This study gives us a valuable information on the general properties of water quality parameters like pH, electrical conductivity, TDS, Bicarbonate, Sulfate, Nitrate, chloride etc. of the study area . Water samples were analyzed at the water quality lab. NIH, Roorkee for pH, electrical conductivity and total dissolved solids. The pH of water varied from 7.14 to 7.75. The electrical conductivity (EC) of sample falls from 620µS/cm to 2000µS/cm. The overall total dissolved solids in water of study area varied from 120mg/l to 900mg/l. Overall the range of the Chloride in water of the study area tend to falls between 13mg/l to 375mg/l. Sulfate of all the water samples that were collected from the study area have ranged from 28mg/l to 250mg .The range of the Bicarbonate of all the water samples varied from 320mg/l to 1051mg/l. The study area helps to know about water quality parameters and how to find their values by usingtwo methods : 1) titration method 2) instrumental method .It also helps us to apply these water quality parameters in ArcGis. It helps us to show the values of different parameters in different blocks ofambala for different years In this we have studied different blocks of ambala district Haryana .We have taken the samples from different places from the blocks and also samples are from wells, canal , rivers, ponds.

scholarly journals An Appraisal of Groundwater Contamination : A Case Study of Shallow Wells In Agbowo Community, Southwestern Nigeria

2019 ◽  
pp. 104-115
Author(s):  
Abudulawal L. ◽  
Apanpa K. A.
Keyword(s):  
Water Quality ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
World Health ◽  
Dissolved Solids ◽  
Southwestern Nigeria ◽  
Permissible Limits ◽  
Physico Chemical ◽  
Shallow Wells

Abundant as it may seem in Nigeria, access to clean and potable water is a great challenge. Hence the reason for determination of the physico-chemical properties of the groundwater in Agbowo community in Ibadan, Oyo state Southwestern Nigeria for domestic uses. Water samples collected from thirty-four (34) shallow wells with varying depths were subjected to chemical analysis. The water quality parameters were analyzed in accordance to standard methods. The groundwater analysis reviewed includes pH, electrical conductivity, total dissolved solids (TDS), others include Ca<sup>2+</sup>, Mg<sup>2+</sup>, K<sup>+</sup> Na<sup>+</sup>, Fe<sup>2+</sup>, NO<sub>3</sub>, Cl<sup>-</sup> SO<sub>4</sub><sup>2-</sup> and HCO<sub>3</sub><sup>- </sup>The results indicated that the parameters analyzed have some falling within the limits and some above the maximum permissible limits in accordance to Nigeria Industrial Standard (NIS) and World Health Organization (WHO) guidelines for drinking water. In general, the data revealed that maxima and minima concentrations of the priority physico-chemical water quality parameters examined in the thirty-four (34) water points were mostly within the Target Water Quality Range (TWQR) for domestic use with little exceptions at some points. However, high nitrate concentrations and Total Dissolved Solids (TDS) above the permissible limits in some of the well water sampled are causes for serious concern. Poor construction, lack of maintenance, proximity to sewage tank and stream, as well as indiscriminate dumping of refuse are suggested as the major causes of this development. The overall implication of this observation call for sustenance and improved water resource management strategy for the area in order to prevent the deterioration of the water sources quality, which may pose associated health risks and environmental hazards.

EFFECT OF COVERING IRRIGATION CHANNELS ON TOTAL DISSOLVED SOLIDS AND TOTAL SUSPENDED SOLIDS

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Sherine Ahmed ElBaradei ◽  
Mai Wagih AlSadeq ◽  
Sarah Ehab Abdel Kader
Keyword(s):  
Water Quality ◽  
Suspended Solids ◽  
Total Suspended Solids ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Main Concern ◽  
Irrigation Canals ◽  
Dissolved Solids ◽  
Water Losses

The increase in the evaporation rate is one of the crucial effects of climate change. Water losses due to evaporation are considered as an important challenge that faces the agriculture sector considering the recent water crisis in Egypt. So, covering irrigation canals with the aim to decrease evaporation could be a good solution for this problem, especially if the coverage is expected to be used for power production by covering these canals with solar panels. However, the main concern is the effect of the covering on the quality of water. So, this research study investigates the effect of irrigation canals’ covering on rates of evaporation and some water quality variables specifically total dissolved solids (TDS) and total suspended solids (TSS). The results of the study showed that covering irrigation canals will have a significant effect on water quality parameters. It is found that the studied water quality parameters; TSS and TDS both are decreasing from 56.39 to 56.35 mg/l and from 160.15 to 160.00 mg/l, respectively by increasing the percentage coverage of the canal from 0% to 100%.

scholarly journals Trend analysis of water quality parameters for the Nisava river

2013 ◽  
Vol 11 (3) ◽  
pp. 199-210 ◽  
Author(s):  
Milan Gocic ◽  
Slavisa Trajkovic
Keyword(s):  
Water Quality ◽  
Trend Analysis ◽  
Kendall Test ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Total Hardness ◽  
Significance Level ◽  
Annual Series ◽  
Annual Time Series ◽  
Annual Time

The data of 12 water quality parameters have been daily monitored at the Nis station on the Nisava River during 2000-2004. The trend analysis was performed on monthly, seasonal and annual time series using the Mann-Kendall test, the Spearman?s Rho test and the linear regression at the 5% significance level. The monthly results showed that significant trends were found only in pH, total hardness, Ca and SO4 data. The results in seasonal series indicated that the significant trends were detected in pH, total hardness, Cl, Ca and SO4 data. In annual series, the trends were insignificant at the 5% significance level.

scholarly journals Assessment of Water Quality Index for the Groundwater in Tumkur Taluk, Karnataka State, India

2009 ◽  
Vol 6 (2) ◽  
pp. 523-530 ◽  
Author(s):  
C. R. Ramakrishnaiah ◽  
C. Sadashivaiah ◽  
G. Ranganna
Keyword(s):  
Water Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Total Dissolved Solids ◽  
Physicochemical Analysis ◽  
Total Hardness ◽  
Dissolved Solids ◽  
Groundwater Samples ◽  
Calcium Magnesium ◽  
Iron Manganese

The present work is aimed at assessing the water quality index (WQI) for the groundwater of Tumkur taluk. This has been determined by collecting groundwater samples and subjecting the samples to a comprehensive physicochemical analysis. For calculating the WQI, the following 12 parameters have been considered: pH, total hardness, calcium, magnesium, bicarbonate, chloride, nitrate, sulphate, total dissolved solids, iron, manganese and fluorides. The WQI for these samples ranges from 89.21 to 660.56. The high value of WQI has been found to be mainly from the higher values of iron, nitrate, total dissolved solids, hardness, fluorides, bicarbonate and manganese in the groundwater. The results of analyses have been used to suggest models for predicting water quality. The analysis reveals that the groundwater of the area needs some degree of treatment before consumption, and it also needs to be protected from the perils of contamination

scholarly journals A Spatial Analysis to Define Data Requirements for Hydrological and Water Quality Models in Data-Limited Regions

Water ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 267 ◽  
Author(s):  
Ersilia D’Ambrosio ◽  
Anna De Girolamo ◽  
Marinella Spanò ◽  
Vera Corbelli ◽  
Gennaro Capasso ◽  
...  
Keyword(s):  
Water Quality ◽  
Spatial Analysis ◽  
Surface Water ◽  
Source Parameters ◽  
Quality Parameters ◽  
Point Sources ◽  
Water Quality Parameters ◽  
Limited Area ◽  
Climatic Data ◽  
Basin Scale

The objective of the present work is a spatial analysis aimed at supporting hydrological and water quality model applications in the Canale d’Aiedda basin (Puglia, Italy), a data-limited area. The basin is part of the sensitive environmental area of Taranto that requires remediation of the soil, subsoil, surface water, and groundwater. A monitoring plan was defined to record the streamflow and water quality parameters needed for calibrating and validating models, and a database archived in a GIS environment was built, which includes climatic data, soil hydraulic parameters, groundwater data, surface water quality parameters, point-source parameters, and information on agricultural practices. Based on a one-year monitoring of activities, the average annual loads of N-NO3 and P-PO4 delivered to the Mar Piccolo amounted to about 42 t year−1, and 2 t year−1, respectively. Knowledge uncertainty in monthly load estimation was found to be up to 25% for N-NO3 and 40% for P-PO4. The contributions of point sources in terms of N-NO3 and P-PO4 were estimated at 45% and 77%, respectively. This study defines a procedure for supporting modelling activities at the basin scale for data-limited regions.

Sign in / Sign up

Export Citation Format

Share Document