scholarly journals Optimal Decisions for Two Risk-Averse Competitive Manufacturers under the Cap-and-Trade Policy and Uncertain Demand

Author(s):  
Hongxia Sun ◽  
Jie Yang ◽  
Yang Zhong

With the increasingly serious problem of environmental pollution, reducing carbon emissions has become an urgent task for all countries. The cap-and-trade (C&T) policy has gained international recognition and has been adopted by several countries. In this paper, considering the uncertainty of market demand, we discuss the carbon emission reduction and price policies of two risk-averse competitive manufacturers under the C&T policy. The two manufacturers have two competitive behaviors: simultaneous decision making and sequential decision making. Two models were constructed for these behaviors. The optimal decisions, carbon emission reduction rate, and price were obtained from these two models. Furthermore, in this paper the effects of some key parameters on the optimal decision are discussed, and some managerial insights are obtained. The results show that the lower the manufacturers’ risk aversion level is, the higher their carbon emission reduction rate and utilities. As the carbon quota increases, the manufacturers’ optimal carbon reduction rate and utilities increase. Considering consumers’ environmental awareness, it is more beneficial for the government to reduce the carbon quota and motivate manufacturers’ internal enthusiasm for emission reduction. The government can, through macro control of the market, make carbon trading prices increase appropriately and encourage manufacturers to reduce carbon emissions.

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1810
Author(s):  
Kaitong Xu ◽  
Haibo Kang ◽  
Wei Wang ◽  
Ping Jiang ◽  
Na Li

At present, the issue of carbon emissions from buildings has become a hot topic, and carbon emission reduction is also becoming a political and economic contest for countries. As a result, the government and researchers have gradually begun to attach great importance to the industrialization of low-carbon and energy-saving buildings. The rise of prefabricated buildings has promoted a major transformation of the construction methods in the construction industry, which is conducive to reducing the consumption of resources and energy, and of great significance in promoting the low-carbon emission reduction of industrial buildings. This article mainly studies the calculation model for carbon emissions of the three-stage life cycle of component production, logistics transportation, and on-site installation in the whole construction process of composite beams for prefabricated buildings. The construction of CG-2 composite beams in Fujian province, China, was taken as the example. Based on the life cycle assessment method, carbon emissions from the actual construction process of composite beams were evaluated, and that generated by the composite beam components during the transportation stage by using diesel, gasoline, and electric energy consumption methods were compared in detail. The results show that (1) the carbon emissions generated by composite beams during the production stage were relatively high, accounting for 80.8% of the total carbon emissions, while during the transport stage and installation stage, they only accounted for 7.6% and 11.6%, respectively; and (2) during the transportation stage with three different energy-consuming trucks, the carbon emissions from diesel fuel trucks were higher, reaching 186.05 kg, followed by gasoline trucks, which generated about 115.68 kg; electric trucks produced the lowest, only 12.24 kg.


2021 ◽  
Vol 14 (1) ◽  
pp. 12-19
Author(s):  
Yuant Tiandho ◽  
Fitri Afriani

Issues related to energy sustainability and carbon emission reduction are continuously being concerned by the Government of the Republic of Indonesia. Various efforts and programs have been launched to achieve targets of the related issues. As known that energy use for cooking by the household is continuously increasing in relation to population growth that will of course increase in energy need which relates to the sustainability of presence energy and carbon emission. Accordingly, the LPG stove conversion program to an electric stove was introduced in order to achieve the target to solve such issues. This paper compared of efficiency and carbon emissions of both electric filament stoves and induction stoves. The result indicated that the induction stove has better efficiency compared with the electric stove. The study also was proved that the carbon emissions for both types of stoves were relatively low in comparison with LPG stoves. However, the enormous operational power of the induction stove is still a challenge that must be resolved to achieve the target of energy sustainability in Indonesia.


Author(s):  
Linghong Zhang ◽  
Hao Zhou ◽  
Yanyan Liu ◽  
Rui Lu

More and more countries employ the Carbon Cap and Trade mechanism (CCT-mechanism) to stimulate the manufacturer to produce much more eco-friendly products. In this paper, we study how the CCT-mechanism affects competitive manufacturers’ product design and pricing strategies. Assume that there are two competitive manufacturers; we give the optimal closed form solutions of the carbon emission reduction rates and retail prices in the Nash game model and the Stackelberg game model with CCT-mechanism, respectively. Additionally, we also discuss the impacts of CCT-mechanism, consumer environmental awareness (CEA), and the sensitivity of switchovers toward price on the optimal carbon emission reduction rates, retail prices, and manufacturers’ profits. We find that (i) when the carbon quota is not enough, there is a trade off between investing in producing much greener product and purchasing carbon quota; when the carbon price is not high, the manufacturer tends to purchase the carbon quota; and when the carbon price is much higher, the manufacturer is more willing to increase the environmental quality of the product; (ii) manufacturer’s size affects product’s emission reduction rate and manufacturer’s optimal profit; larger manufacturer tends to produce much greener product, but it does not mean that he could obtain much more money than the small manufacturer; and (iii) the decision sequence changes manufacturer’s strategies; the optimal emission reduction rate in Nash and Stackelberg game models are almost the same, but the differences of prices and profits between Nash and Stackelberg model’s are much bigger.


2021 ◽  
Author(s):  
Yu Zhang ◽  
Tianshan Ma ◽  
Syed Abdul Rehman Khan

This research is to investigate the decision making of the members of remanufacturing supply chain under the government involvement. Different scenarios are analyzed in this research, and it is found that the subsidy for carbon emission reduction can increase the WPs (waste products) reusing. When the recycler participates in remanufacturing supply chain, the cost of remanufacturer will be shared and through centralizing the decision making, the carbon emission reduction will be enhanced and the whole supply chain’s profit will decrease. So it is suggested that the government need to adjust the subsidy for carbon emission reduction in terms of the quality level of WPs and the cooperation between recycler and remanufacturer is suggested, especially in the high-value waste remanufacturing supply chain.


Author(s):  
Hao Zou ◽  
Jin Qin ◽  
Bo Dai

This research investigates the effect of fairness concerns on a sustainable low-carbon supply chain (LCSC) with a carbon quota policy, in which a manufacturer is in charge of manufacturing low-carbon products and sells them to a retailer. The demand is affected by price and the carbon emission reduction rate. The optimal decisions of pricing and carbon emission reduction rate are analyzed under four decision models: (i) centralized decision, (ii) decentralized decision without fairness concern, (iii) decentralized decision with manufacturer’s fairness concern, (iv) decentralized decision with retailer’s fairness concern. The results indicate that the profits in the centralized LCSC are higher than those in the decentralized LCSC with fairness concern. If a manufacturer pays close attention to fairness, the fairness concern coefficient will reduce the carbon emission reduction rate and the profit of the LCSC and increase the wholesale price and the retail price of the product. If a retailer pays close attention to fairness, and the preference of consumers for a low-carbon product is low, the fairness concern coefficient of the retailer increases the total profit of the LCSC and decreases the carbon emission reduction rate and retail price of the product. Otherwise, if the preference of consumers for a low-carbon product is great, the fairness concern coefficient of the retailer would lead to a lower retail price compared with the retail price in the centralized decision and decrease the total profit of the LCSC.


2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Zhipeng Li ◽  
Shuzhen Zhu ◽  
Xinyu Cao

Considering the multitargets of corporate carbon emission reduction and the fairness preference psychology of the company, a government incentive model for corporate carbon emission reduction was constructed. The impact of corporate fairness preferences on government carbon emission reduction incentive strategies is studied. In addition, numerical simulation is used to analyze the impact of changes in correlation coefficients, fairness preference coefficients, and discount rates on the optimal enterprise effort coefficient and the government optimal incentive coefficient. Research shows that the degree of fairness preference of a company has a direct impact on the degree of corporate effort, while the discount rate will only have an impact on the company’s long-term effort. In order to improve corporate carbon emission reduction efforts, the government must not only consider the impact of fairness preference on corporate efforts but also flexibly adjust the incentive coefficient of long-term and short-term tasks based on the discount rate.


2019 ◽  
Vol 118 ◽  
pp. 04014
Author(s):  
Tao Yi ◽  
Mohan Qiu ◽  
Zhengang Zhang ◽  
Song Mu ◽  
Yu Tian

Under the mandatory push of meeting carbon emission reduction commitments proposed in the Paris Agreement, the analysis on the peaking time of China’s carbon emissions deserves enough attention. This paper focuses on the peaking times of total carbon emissions (TCE) and carbon emission intensity (CEI) in the Yangtze River Delta (YRD). According to the development of carbon emissions in YRD and related targets in the 13th Five-Year Plan, the peaking times of TCE and CEI in different scenarios are predicted based on the influence mechanism analysis of carbon emissions in YRD from the perspective of energy, economy and society. Considering the development characteristics of China at this stage, this paper introduces several new indicators such as full-time equivalent of research and development (R&D) personnel and investment in environmental pollution control. Based on the study results, several policy recommendations are put forward to fulfil China’s carbon emission reduction commitments.


2020 ◽  
Vol 12 (11) ◽  
pp. 4380
Author(s):  
Xinyue Yang ◽  
Ye Song ◽  
Mingjun Sun ◽  
Hongjun Peng

We consider a capital constrained timber and carbon sink supply chain under the cap-and-trade scheme, where the forest company produces timber and carbon sink. We consider two subsidy modes: financing subsidy to the carbon sink forests and financing subsidy to the manufacturer’s emission reductions. We apply a Stackelberg model and mainly consider the impact of subsidies on the profits and the strategies of the supply chain members. The results show that when the government gives a financing subsidy to the carbon sink forests, it is conducive to promoting the expansion of carbon sink forests, as well as the enhancement of the forest company’s profit. However, a larger supply of carbon sinks generates a lower price, which leads to the manufacturer reducing the technical emission reduction level and purchasing more carbon emission rights instead. On the other hand, when the manufacturer receives a financing subsidy for the technical emission reduction costs, its production becomes cleaner than before, and the profits of the forest company and the manufacturer increase.


2019 ◽  
Vol 11 (4) ◽  
pp. 1215 ◽  
Author(s):  
Wen Jiang ◽  
Wenfei Lu ◽  
Qianwen Xu

Cap-and-trade has become one of the most widely used carbon emission limitation methods in the world. Its constraints have a great impact on the carbon emission reduction decisions and production operations of supply chain enterprises, as well as profit distribution. In the construction supply chain, there are few studies on the profit distribution and emission reduction decisions considering cap-and-trade policy. This paper investigates the profit distribution model of a two-echelon construction supply chain consisting of a general contractor and a subcontractor with cap-and-trade policy. Using game theory and Shapley value method, the optimal emission reduction decisions and profit distribution under three cooperation modes of pure competition, co-opetition, and pure cooperation are obtained, respectively. The research shows that the profits of the construction supply chain are increasing in pure competition, co-opetition, and pure cooperation scenarios, and the emission reduction amount of the construction supply chain in the case of pure cooperation is greater than that of pure competition and co-opetition. The carbon emission reduction amount under the co-opetition scenario is not always greater than that under the pure competition scenario, which depends on the emission reduction cost coefficient relationship of general contractor and subcontractor. When the cost coefficient of emission reduction of the general contractor is less than that of the subcontractor, the emission reduction amount under pure competition is larger than that under co-opetition. A numerical study is carried out to verify the conclusions and illustrated the profits of the supply chain decreased with the increase of carbon emission reduction cost coefficient, and had nothing to do with the emission reduction efficiency of enterprises.


2020 ◽  
Vol 12 (16) ◽  
pp. 6498 ◽  
Author(s):  
Fuquan Zhao ◽  
Feiqi Liu ◽  
Han Hao ◽  
Zongwei Liu

The Chinese government has made a commitment to control carbon emissions, and the deployment of renewable energy power generation is considered as an effective solution. In recent years, great effort has been exerted to support the development of renewable energy in China. While, due to fiscal pressures and changes in management policies, related subsidies are diminishing now and energy users are asked to pay for the cost. Regulations about carbon cap and renewable energy consumptions are issued to transfer the responsibility of consuming renewable energy and reducing carbon emissions to energy consumers. A national carbon trading system is set up in China and is under its growth stage. Therefore, this study lists the factors that should be considered by the energy users, analyzes the levelized cost of electricity generated by renewable energy in four cities in China, Beijing, Shanghai, Guangzhou, Wuhan, and compares the results with current carbon prices. Based on the research, under the current status, it is still more cost-efficient for enterprises to buy carbon credits than introduce renewable energies, and great differences among cities are shown due to different natural conditions. Besides, with diminishing subsidies and development of the carbon trading market, the carbon price will gradually reflect the actual value and carbon emission reduction costs will become an important part of enterprise expenditure. In the long term, enterprises should link more factors to carbon emissions, like social responsibility and brand image, instead of only the cost.


Sign in / Sign up

Export Citation Format

Share Document