scholarly journals Enabling Energy-Efficient Physical Computing through Analog Abstraction and IP Reuse

2018 ◽  
Vol 8 (4) ◽  
pp. 47 ◽  
Author(s):  
Jennifer Hasler ◽  
Aishwarya Natarajan ◽  
Sihwan Kim
Keyword(s):  
Low Power ◽  
Open Source ◽  
Energy Efficient ◽  
Large Scale ◽  
System Level ◽  
Physical Computing ◽  
Ultra Low Power ◽  
Mixed Signal ◽  
Starting Point ◽  
Analog Arrays

This paper shows the first step in analog (and mixed signal) abstraction utilized in large-scale Field Programmable Analog Arrays (FPAA), encoded in the open-source SciLab/Xcos based toolset. Having any opportunity of a wide-scale utilization of ultra-low power technology both requires programmability/reconfigurability as well as abstractable tools. Abstraction is essential both make systems rapidly, as well as reduce the barrier for a number of users to use ultra-low power physical computing techniques. Analog devices, circuits, and systems are abstractable and retain their energy efficient opportunities compared with custom digital hardware. We will present the analog (and mixed signal) abstraction developed for the open-source toolkit used for the SoC FPAAs. Abstraction of Blocks in the FPAA block library makes the SoC FPAA ecosystem accessible to system-level designers while still enabling circuit designers the freedom to build at a low level. Multiple working test cases of various levels of complexity illustrate the analog abstraction capability. The FPAA block library provides a starting point for discussing the fundamental block concepts of analog computational approaches.

scholarly journals A Simulation Study of a Gate-All-Around Nanowire Transistor with a Core–Insulator

Micromachines ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 223 ◽  
Author(s):  
Yannan Zhang ◽  
Ke Han ◽  
and Jiawei Li
Keyword(s):  
Metal Oxide ◽  
Low Power ◽  
Energy Efficient ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistors ◽  
Future Generation ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Ultra Low Power

Ultra-low power and high-performance logical devices have been the driving force for the continued scaling of complementary metal oxide semiconductor field effect transistors which greatly enable electronic devices such as smart phones to be energy-efficient and portable. In the pursuit of smaller and faster devices, researchers and scientists have worked out a number of ways to further lower the leaking current of MOSFETs (Metal oxide semiconductor field effect transistor). Nanowire structure is now regarded as a promising candidate of future generation of logical devices due to its ultra-low off-state leaking current compares to FinFET. However, the potential of nanowire in terms of off-state current has not been fully discovered. In this article, a novel Core–Insulator Gate-All-Around (CIGAA) nanowire has been proposed, investigated, and simulated comprehensively and systematically based on 3D numerical simulation. Comparisons are carried out between GAA and CIGAA. The new CIGAA structure exhibits low off-state current compares to that of GAA, making it a suitable candidate of future low-power and energy-efficient devices.

Ultra-low-power time-efficient circuitry of dual comparator/amplifier for SAR ADC by CMOS technology

Circuit World ◽  
2020 ◽  
Vol 46 (3) ◽  
pp. 183-192
Author(s):  
Muhammad Yasir Faheem ◽  
Shun'an Zhong ◽  
Xinghua Wang ◽  
Muhammad Basit Azeem
Keyword(s):  
Low Power ◽  
Energy Efficient ◽  
Supply Voltage ◽  
Main Idea ◽  
Cost Effective ◽  
Cmos Technology ◽  
Sar Adc ◽  
Ultra Low Power ◽  
Content Type ◽  
Analogue To Digital

Purpose Successive approximation register (SAR) analogue to digital converter (ADC) is well-known with regard to low-power operations. To make it energy-efficient and time-efficient, scientists are working for the last two decades, and it still needs the attention of the researchers. In actual work, there is no mechanism and circuitry for the production of two simultaneous comparator outputs in SAR ADC. Design/methodology/approach A small-sized, low-power and energy-efficient circuitry of a dual comparator and an amplifier is presented, which is the most important part of SAR ADC. The main idea is to design a multi-dimensional circuit which can deliver two quick parallel comparisons. The circuitry of the three devices is combined and miniaturized by introducing a lower number of MOSFET’s and small-sized capacitors in such a way that there is no need for any matching and calibration. Findings The supply voltage of the proposed comparator is 0.7 V with the overall power consumption of 0.257mW. The input and clock frequencies are 5 and 50 MHz, respectively. There is no requirement for any offset calibration and mismatching concerns due to sharing and centralization of spider-latch circuitry. The total offset voltages are 0.13 0.31 mV with 0.3VDD to VDD. All the components are small-sized and miniaturized to make the circuit cost-effective and energy-efficient. The rise and response time of comparator is around 100 ns. SNDR improved from 56 to 65 dB where the input-referred noise of an amplifier is 98mVrms. Originality/value The proposed design has no linear-complexity compared with the conventional comparator in both modes (working and standby); it is ultimately intended and designed for 11-bit SAR ADC. The circuit based on three rapid clock pulses for three different modes includes amplification and two parallel comparisons controlled and switched by a latch named as “spider-latch”.

An Ultra-Low Power Holter and Low Complexity Design Using Mixed Signal Processor

2013 ◽  
Vol 284-287 ◽  
pp. 1627-1632
Author(s):  
Hsieh Chang Huang ◽  
Ching Tang Hsieh ◽  
Guang Lin Hsieh
Keyword(s):  
Low Power ◽  
Analog Circuits ◽  
Finite Impulse Response ◽  
Low Complexity ◽  
Fir Filter ◽  
Ecg Signal ◽  
Ultra Low Power ◽  
Mixed Signal ◽  
Sd Card ◽  
Signal Processor

An ultra-low power, portable, and easily implemented Holter recorder is necessary for patients or researchers of electrocardiogram (ECG). Such a Holter recorder with off-the-shelf components is realized with mixed signal processor (MSP) in this paper. To decrease the complexity of analog circuits and the interference of 60 Hz noise from power line, we use the MSP to implement a finite impulse response (FIR) filter which is equiripple design. We also integrate the ring buffer for the input samples and the symmetrical characteristic of the FIR filter for efficiently computing convolution. The experimental results show that the ECG output signal with the PQRST feature is easy to be distinguished. This ECG signal is recorded for 24 hours using a SD card. Furthermore, the ECG signal is transmitted with a smartphone via Bluetooth to decrease the burden of the Holter recorder. As a result, this paper uses the Lomb method for the spectral analysis of Heart Rate Variability (HRV) better than Fast Fourier Transform (FFT).

Sign in / Sign up

Export Citation Format

Share Document