scholarly journals Reduction of Hydrodynamic Noise of 3D Hydrofoil with Spanwise Microgrooved Surfaces Inspired by Sharkskin

2019 ◽  
Vol 7 (5) ◽  
pp. 136 ◽  
Author(s):  
Zhigao Dang ◽  
Zhaoyong Mao ◽  
Wenlong Tian
Keyword(s):  
Noise Reduction ◽  
Three Dimensional ◽  
Low Noise ◽  
Numerical Predictions ◽  
Large Eddy ◽  
Flow Induced Noise ◽  
Hydrodynamic Noise ◽  
Reduction Effect ◽  
Underwater Structures ◽  
Good Agreement

Loud hydrodynamic noise is not only potentially harmful to the health of organisms in the ocean, but it is also a threat to the survival of underwater vehicles. Different from the general noise reduction technologies at present, a new idea for a flow-induced noise reduction design with spanwise microgrooved surfaces inspired by sharkskin is introduced in this paper. Large eddy simulations (LES) combined with the Ffowcs Williams and Hawkings (FW-H) equation are adopted to simulate the hydrodynamic noise of the three-dimensional (3D) hydrofoil. The accuracy of the numerical predictions is checked against existing experimental data, achieving good agreement. With the increase of observing distance, the noise reduction effect at the trailing edge direction is gradually apparent, and a maximum noise reduction of up to 7.28 dB can be observed. It is seen from the noise spectra of the biomimetic hydrofoil that the main peaks are eliminated, and the noise level at high frequency is also decreased. The cause of noise reduction lies in the secondary vortex generated in the microgrooves, which hinder the process of turbulence, consume the energy of the flow, and weaken the intensity of turbulent burst. The results of this study provide a new way to design low-noise underwater structures with hydrofoils.

scholarly journals Evaluating the Tire/Pavement Noise and Surface Texture of Low-Noise Micro-Surface Using 3D Digital Image Technology

2021 ◽  
Vol 8 ◽  
Author(s):  
Wang Chen ◽  
Mulian Zheng ◽  
Haiyang Wang
Keyword(s):  
Noise Reduction ◽  
Digital Image ◽  
Surface Texture ◽  
Three Dimensional ◽  
Low Noise ◽  
Road Noise ◽  
Texture Model ◽  
Promising Tool ◽  
Absorbing Materials ◽  
Reduction Effect

As a common preventive maintenance technique for asphalt pavement, micro-surface (MS) has the advantages of waterproofing and crack sealing. However, issues such as the fact that the conventional MS generates large noise and the evaluation of the indexes of tire-road noise are relatively less studied. The traditional surface texture index cannot reveal the range and distribution of pavement surface texture, thus hindering research of low-noise MS. To study the mechanism of tire-road noise generated by MS, and propose the tire-road noise and surface texture indicators for MS. In this study, the mechanism of five low-noise MS was systematically analyzed and compared through surface texture and noise tests. Then, a three-dimensional digital texture model (3D-DTM) of MS surface texture was constructed using a series of digital image processing techniques, including grayscale identification, binary conversion, and noise reduction. The results show that optimizing the gradation, adding sound-absorbing materials, and improving the workability of construction can improve the noise reduction performance of MS, it is worth mentioning that the MS prepared with sound-absorbing materials and low-noise gradation has the greatest noise reduction effect, with a maximum reduction of 6.3 dB(A). In addition, it was also found that the 3D-DTM can well reflect the surface texture characteristics of MS. The probability of convex peak distribution (PCD) and the proportion of convex peak area (PCA) with peak heights greater than 0.25 mm (Kh ≥ 0.25), which are extracted from the 3D-DTM, can well reflect the surface texture, tire-road noise, respectively. The results show that the 3D-DTM is a promising tool to optimize the design of low-noise MS.

Comparison of Noise Reduction Performance Evaluation Methods for Low-Noise Pavement in Korea- Part

2021 ◽  
Vol 263 (4) ◽  
pp. 2930-2939
Author(s):  
Byungchae Kim ◽  
Hyunjin Kim ◽  
Wonuk Kang
Keyword(s):  
Noise Reduction ◽  
Noise Level ◽  
Measurement Method ◽  
Road Traffic ◽  
Low Noise ◽  
Management Standards ◽  
Close Proximity ◽  
Porous Pavement ◽  
Reduction Effect ◽  
Measurement Location

In Korea, road noise is assessed as a measurement method of exterior noise emitted by road vehicle for management standards by the National Institute of Environmental Sciences. In this method, the noise felt at the actual pickup point is measured as LAeq (the roadside equivalent noise level). Recently, to clarify the standard for measuring noise on low-noise pavements, the CPX (ISO11819-2; Close-proximity method) was first introduced in the Porous Pavement Guidelines of the Ministry of Land, Infrastructure and Transport. According to ISO, the CPX adopts the side microphone as a mandatory measurement location, and the rear optional. The side location has been a mandatory due to its high correlation with SPB (ISO 11819-1, Statistical Pass-by method). However, according to our previous study on the correlation evaluation between L and CPX rear microphone noise level, both noise reduction effect was about 9-12 dB(A) showed a high correlation in Korea where heavy road traffic is common. The following study aims to show the consistent correlation between the L and CPX rear noise level. Furthermore, it is intended to be helpful in selecting the location of the CPX microphone that can most effectively represent the actual noise on the low-noise pavement in Korea.

scholarly journals ICCM2015: A Comparison of RANS and LES Computational Methods in Analyzing Ventilation Flow Through a Room Fitted with a Two-Sided Windcatcher

2017 ◽  
Vol 14 (03) ◽  
pp. 1750021 ◽  
Author(s):  
A. Niktash ◽  
B. P. Huynh
Keyword(s):  
Natural Ventilation ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Interior Space ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Computational Fluid Dynamics Cfd ◽  
Flow Through ◽  
Cfd Method ◽  
Good Agreement

A windcatcher is a structure for providing natural ventilation using wind power; it is usually fitted on the roof of a building to exhaust the inside stale air to the outside and supplies the outside fresh air into the building interior space working by pressure difference between outside and inside of the building. In this paper, the behavior of free wind flow through a three-dimensional room fitted with a centered position two-canal bottom shape windcatcher model is investigated numerically, using a commercial computational fluid dynamics (CFD) software package and LES (Large Eddy Simulation) CFD method. The results have been compared with the obtained results for the same model but using RANS (Reynolds Averaged Navier–Stokes) CFD method. The model with its surrounded space has been considered in both method. It is found that the achieved results for the model from LES method are in good agreement with RANS method’s results for the same model.

scholarly journals Layout Method of Damping Material for Gearbox Based on Acoustic Contribution

2019 ◽  
Vol 37 (4) ◽  
pp. 757-766
Author(s):  
Yunong Liu ◽  
Lan Liu ◽  
Geng Liu ◽  
Liyan Wu ◽  
Chao Liu ◽  
...  
Keyword(s):  
Noise Reduction ◽  
Present Method ◽  
Element Model ◽  
Low Noise ◽  
Radiated Noise ◽  
Damping Material ◽  
Plate Area ◽  
Acoustic Contribution ◽  
Reduction Effect ◽  
Damping Materials

In order to realize the low noise design of marine gearbox, a layout method of damping materials for gearbox based on acoustic contribution was proposed. The present method can accurately and effectively determine the additional area of damping materials and achieve greatly the noise reduction effect. Firstly, taking a marine single-stage herringbone gearbox as the object, the finite element/boundary element model for the reducer structure was established. After applying the vibration excitation of the gear system, the radiated noise of each field point was solved. Secondly, by analyzing the acoustic transfer vector (ATV) and modal acoustic contribution (MAC), the surface of the gearbox was partitioned, and the partitioned surface was analyzed by using panel acoustic contribution (PAC). Finally, the damping material was added to the plate area which contributes greatly to the radiated noise, and the effect of the noise reduction under different schemes were compared. The results show that the layout design of damping materials based on the present method can reduce the radiation noise of observation points accurately and effectively in the range of 0~4 000 Hz.

NUMERICAL ANALYSIS OF BULK DRAG COEFFICIENT IN DENSE VEGETATION BY IMMERSED BOUNDARY METHOD

2011 ◽  
Vol 1 (32) ◽  
pp. 48 ◽  
Author(s):  
Tomohiro Suzuki ◽  
Taro Arikawa
Keyword(s):  
Drag Coefficient ◽  
Immersed Boundary Method ◽  
Three Dimensional ◽  
Vertical Cylinder ◽  
Immersed Boundary ◽  
Dense Vegetation ◽  
Eddy Simulation ◽  
Boundary Method ◽  
Large Eddy ◽  
Good Agreement

In this paper, bulk drag coefficient in rigid dense vegetation is investigated mainly by using a three dimensional numerical simulation model CADMAS-SURF/3D by incorporating Immersed Boundary Method to calculate flow around the vertical cylinder in the Cartesian grid. Large Eddy Simulation is also incorporated as a turbulence model. Firstly, validation of the developed model is conducted with a single cylinder in the flow field based on literature. All the results obtained here (Re=300, 3,900 and 8,000) show good agreement with the reference data in literature. After the validation, multiple cylinders are allotted in three different densities (S/D=2.8, 2.0, 1.4) in a numerical wave tank and numerical simulations are conducted to investigate bulk drag coefficient. The result shows that the ratio of bulk drag coefficient to drag coefficient, which represents a reduction, is not just a function of density but a function of parameter 2a/S, in which 2a is stroke of the motion and S is cylinder distance. 2a is less than S, the effect of the density is neglected because the wake does not reach the other cylinders even when the density is high. On the contrary, it might affect the ratio of bulk drag coefficient to drag coefficient when the stroke of the motion is larger than the cylinder distance even when the density is low. In general, the ratio of bulk drag coefficient to drag coefficient decreases when 2a/S increases.

Numerical Study of the Turbulent Wake of a Towed or Auto-Propelled Axisymmetrical Body in a Stratified Medium Using LES-VMS

2013 ◽  
Author(s):  
B. Sainte-Rose ◽  
X. Lenhardt ◽  
O. Allain ◽  
A. Dervieux
Keyword(s):  
Numerical Study ◽  
Three Dimensional ◽  
Turbulent Wake ◽  
Flow Dynamics ◽  
Stratified Medium ◽  
Two Dimensional ◽  
Multi Scale ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Good Agreement

Numerical simulations of close and far wakes behind an axisymmetrical body in a stratified medium are carried out. Towed and auto-propelled regimes are considered. The parameters of the flow are Pr = 7, Re = 10000 based on the diameter of the cylinder and F = 25. Turbulence is modelled with a Large Eddy Simulation - Variational Multi-Scale approach. Realistic results are obtained for the towed case where the so-called three-dimensional (3D), non-equilibrium (NEQ) and quasi two-dimensional (Q2D) regimes are exhibited with very good agreement with the experiments. In addition, the effect of auto-propulsion on the flow dynamics is satisfactorily addressed.

Computation of Three-Dimensional Turbulent Flows in a Pipe Junction with Reference to Engine Inlet Manifolds

1992 ◽  
Vol 206 (4) ◽  
pp. 285-296 ◽  
Author(s):  
H Fu ◽  
M J Tindal ◽  
A P Watkins ◽  
M Yianneskis
Keyword(s):  
Turbulent Flows ◽  
Combustion Engine ◽  
Laser Doppler Anemometry ◽  
Numerical Study ◽  
Three Dimensional ◽  
Turbulence Energy ◽  
Numerical Predictions ◽  
Split Ratio ◽  
Inlet Manifold ◽  
Good Agreement

This paper presents a numerical study of the flows in an internal combustion engine inlet manifold. The three-dimensional turbulent flows through a single branched manifold were simulated using the κ-ɛ model of turbulence. The flow structure was characterized in detail and the effects of the flow split ratio and inlet flowrate were investigated. Detailed measurements were performed to validate the numerical predictions, using laser Doppler anemometry. Good agreement was obtained between the predicted and the measured mean velocities. The predicted levels of turbulence energy are in qualitative agreement with the measurements.

Noise Reduction on Centrifugal Fan via the Quarter-Wave Resonator

2015 ◽  
Vol 764-765 ◽  
pp. 319-323
Author(s):  
Sheam Chyun Lin ◽  
Yu Chuan Wu ◽  
Hung Cheng Yen ◽  
Wen Syang Hsu ◽  
Yung Jen Cheng
Keyword(s):  
Noise Reduction ◽  
Three Dimensional ◽  
Centrifugal Fan ◽  
Design Guideline ◽  
Resonator Design ◽  
Systematic Scheme ◽  
Quarter Wave Resonator ◽  
Wave Resonator ◽  
Quarter Wave ◽  
Flow Induced Noise

The purpose of this work is to improve flow-induced noise for the centrifugal fan with quarter-wave resonator by design scheme, mockup fabrication, and experimental test. At first, the cascade theory is utilized to generate the three-dimensional fan configuration which is fabricated for performance and acoustic tests later. Next, FFT is applied to measure the noise for comparison and evaluating the effect of quarter-wave resonator. To reduce the fan noise, a set of quarter-wave resonator of this centrifugal fan are designed and fabricated on the centrifugal fan. Consequently, the flow-induced-noise reduction due to the aerodynamics is examined and discussed in details. In conclusions, a comprehensive parametric study on quarter-wave resonator is carried out and summarized for attaining a design guideline for its application on centrifugal fan. The accomplishment of this study provides a systematic scheme of noise reduction for a centrifugal fan with the addition of quarter-wave resonator design.

Low Noise FEGV Designed by Numerical Method Based on CFD

2004 ◽  
Author(s):  
Naoki Tsuchiya ◽  
Yoshiya Nakamura ◽  
Shinya Goto ◽  
Hidekazu Kodama ◽  
Osamu Nozaki ◽  
...  
Keyword(s):  
Noise Reduction ◽  
Guide Vane ◽  
Three Dimensional ◽  
Leading Edge ◽  
High Amplitude ◽  
Aerodynamic Performance ◽  
Low Noise ◽  
Test Facility ◽  
Noise Sources ◽  
Fan Noise

This paper describes a low noise FEGV (Fan Exit Guide Vane), which is designed by a fan noise prediction method based on CFD. Fan noise is predicted by a hybrid scheme, which is the combination of three-dimensional CFD and three-dimensional linear theory. Characteristics of noise sources are investigated in some kinds of FEGV shapes. High amplitude areas spread not only along the leading edge but also in the span-wise positions along the mid-chord. It is found that high amplitude areas around the mid-chord make an important role in noise generation, and appropriate aft-ward swept angle and span-wise distribution of leaned angle could reduce the amplitude of the noise sources keeping aerodynamic performance. A fan noise test for fan scale models has been conducted at an anechoic test facility in IHI Mizuho to demonstrate noise reduction and performance of low noise FEGV. Noise reduction can be achieved keeping aerodynamic performance compared to conventional straight FEGV.

Sign in / Sign up

Export Citation Format

Share Document