scholarly journals Experimental Study of Large-Temperature-Range and Long-Period Monitoring for LNG Marine Auxiliary Based on Fiber Bragg Grating Temperature Measurement

2021 ◽  
Vol 9 (9) ◽  
pp. 917
Author(s):  
Fenghui Han ◽  
Zhe Wang ◽  
Hefu Zhang ◽  
Dongxing Wang ◽  
Wenhua Li ◽  
...  

Temperature is a key variable to evaluate the energy consumption and thermodynamic performance of traditional marine auxiliary machinery, chillers and piping systems. In particular, for the cryogenic storage tanks and fuel gas supply systems of LNG ships, explosion-proof and low-temperature-resistance properties bring new challenges to the onboard temperature measurement and monitoring. In order to promote the development of high-performance and safer monitoring systems for LNG ships, this paper adopted fiber Bragg grating (FBG) technology to ensure the measurement safety and accuracy of temperature sensors, and performs a series of experiments in a large temperature range on the chiller, pipeline, and cryogenic storage tank of an LNG ship and their long-term reliabilities. Firstly, the principle and composition of the designed FBG temperature sensors are introduced in detail, and the measurement accuracy and range of different metal-coated optical fibers were tested in a large temperature range and compared against the traditional thermistors. Then, the effects of different operating conditions of the LNG marine chiller system and cryogenic storage tank on the temperature measurements were investigated. In addition, the drift degrees of the optical fibers and industrial thermistors were analyzed to figure out their reliabilities for long-term temperature measurements. The results showed that for the long-period (16 months) monitoring of LNG ships in a large temperature range (105–315 K) under different shipping conditions, the optical temperature measurement based on FBG technology has sufficient accuracy and dynamic sensitivity with a higher safety than the traditional thermoelectric measurement. Besides, the ship vibration, ambient humidity, and great temperature changes have little impact on its measurement reliability and drifts. This research can provide references and technical supports to the performance testing systems of LNG ships and other relevant vessels with stricter safety standards.

2020 ◽  
Vol 12 ◽  
Author(s):  
Fang Wang ◽  
Jingkai Wei ◽  
Caixia Guo ◽  
Tao Ma ◽  
Linqing Zhang ◽  
...  

Background: At present, the main problems of Micro-Electro-Mechanical Systems (MEMS) temperature detector focus on the narrow range of temperature detection, difficulty of the high temperature measurement. Besides, MEMS devices have different response characteristics for various surrounding temperature in the petrochemical and metallurgy application fields with high-temperature and harsh conditions. To evaluate the performance stability of the hightemperature MEMS devices, the real-time temperature measurement is necessary. Objective: A schottky temperature detector based on the metal/n-ZnO/n-Si structures is designed to measure high temperature (523~873K) for the high-temperature MEMS devices with large temperature range. Method: By using the finite element method (FEM), three different work function metals (Cu, Ni and Pt) contact with the n-ZnO are investigated to realize Schottky. At room temperature (298K) and high temperature (523~873K), the current densities with various bias voltages (J-V) are studied. Results: The simulation results show that the high temperature response power consumption of three schottky detectors of Cu, Ni and Pt decreases successively, which are 1.16 mW, 63.63 μW and 0.14 μW. The response temperature sensitivities of 6.35 μA/K, 0.78 μA/K, and 2.29 nA/K are achieved. Conclusion: The Cu/n-ZnO/n-Si schottky structure could be used as a high temperature detector (523~873K) for the hightemperature MEMS devices. It has a large temperature range (350K) and a high response sensitivity is 6.35 μA/K. Compared with traditional devices, the Cu/n-ZnO/n-Si Schottky structure based temperature detector has a low energy consumption of 1.16 mW, which has potential applications in the high-temperature measurement of the MEMS devices.


2012 ◽  
Vol 503-504 ◽  
pp. 1672-1678
Author(s):  
Zhao Yang ◽  
Xiao Ping Xu ◽  
Chuan Li ◽  
Yan Chen ◽  
Jiang Chun Xu ◽  
...  

The charge unit supply power when the power is cut off. It has been the necessary components in every type of substations to ensure the continuous operations of electric relays, automatic devices and circuit breakers. By using contacting electrical insulating Fiber Bragg Grating temperature sensor, the monitored equipment can be measured and controlled under the safe temperature. The temperatures of three fans and environment have been surveyed since June 6, 2010, in the charge unit of Yanjin substation’s main control room. The real-time monitoring of 24-hours indicates that the temperature changes in the range of 1°C. At the long-term of 479 days, the average daily minimum temperature range of three fans is 12.48°C, and the maximum range is 23.07°C. The maximum temperature is 39.14°C on April 30, 2011, and the minimum temperature is 23.98°C on January 10, 2011. The daily average of ambient temperature range is 12.04 °C, the maximum temperature is 38.38 °C on July 16, 2010, and the minimum temperature is 26.34 °C on January 9, 2011. The maximum difference between the temperature of fan and the ambient temperature is 7.60 °C on October 23, 2010. According to the relevant standards and monitoring results, the maximum threshold of fan temperature is defined to 85°C, and the threshold of temperature rise is 20°C.


2021 ◽  
Vol 60 (05) ◽  
Author(s):  
Zhang Hao ◽  
Xinfeng Yu ◽  
Zhu Yu ◽  
Yunfeng Bai ◽  
Yongqiang Tian ◽  
...  

Water ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3572
Author(s):  
Sandra Drusová ◽  
R. Martijn Wagterveld ◽  
Karel J. Keesman ◽  
Herman L. Offerhaus

Drinking water wells require continuous monitoring to prevent groundwater-related issues such as pollution, clogging and overdrafting. In this research, optical fibers with fiber Bragg grating sensors were placed in an aquifer to explore their potential use in long-term well monitoring. Fiber Bragg grating sensors were simultaneously sensitive to consolidation strain and temperature, and these two responses were separated by creating autoregressive consolidation models. Consolidation responses from these multiple sensors were rescaled to obtain pressure distribution along the depth. Pressure and temperature data showed impermeable soil layers and locations where groundwater accumulated. Time development of temperature along the fiber revealed oxidation of minerals and soil layers with varying permeability. Fiber Bragg grating sensors are useful tools to examine subsurface processes near wells and they can show the first signs of clogging.


2014 ◽  
Vol 16 (5) ◽  
pp. 055401 ◽  
Author(s):  
Li Wang ◽  
Weigang Zhang ◽  
Pengcheng Geng ◽  
Shecheng Gao ◽  
Jieliang Li ◽  
...  

Diabetes ◽  
1989 ◽  
Vol 38 (3) ◽  
pp. 386-396 ◽  
Author(s):  
N. M. Kneteman ◽  
D. Alderson ◽  
D. W. Scharp ◽  
P. E. Lacy

Author(s):  
Anubhav Srivastava ◽  
Flavio Esposito ◽  
Joao M. B. Pereira ◽  
Stefania Campopiano ◽  
Agostino Iadicicco

Sign in / Sign up

Export Citation Format

Share Document