scholarly journals Probabilistic Conversion of the Compressive Strength of Cubes to Cylinders of Natural and Recycled Aggregate Concrete Specimens

Materials ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 280 ◽  
Author(s):  
João Pacheco ◽  
Jorge de Brito ◽  
Carlos Chastre ◽  
Luís Evangelista
Keyword(s):  
Compressive Strength ◽  
Conversion Factor ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Structural Behaviour ◽  
Aggregate Concrete ◽  
Coarse Aggregates ◽  
Natural Aggregate ◽  
Using Data ◽  
The Relationship

This paper investigates the effect of recycled coarse aggregate incorporation on the relationship between 150 mm cubic and Փ 150 mm cylindrical compressive strength (the reference strength of standards) by comparing data from recycled and natural aggregate concrete compositions in which both cubes and cylinders were tested. A conversion factor from cubic to cylindrical strength is proposed in two versions: A deterministic and a probabilistic one. Such factor has not been studied before and researchers have been converting cubic data as if natural aggregate concrete were tested. The probabilistic factor is intended for reliability analyses on the structural behaviour of recycled aggregate concrete using data from laboratory cube tests. It was found that the incorporation of recycled coarse aggregates sourced from concrete waste significantly decreases the expected value of the factor but the factor’s scatter is relatively unaffected.

PROPERTIES OF CONCRETE MADE WITH RECYCLED COARSE AGGREGATES FROM OLD CONCRETE CUBES

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
I. H. Adebakin ◽  
J. T. Adu ◽  
O. M. Ofuyatan
Keyword(s):  
Compressive Strength ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Low Grade ◽  
Aggregate Concrete ◽  
Coarse Aggregates ◽  
Natural Aggregate ◽  
Absolute Volume ◽  
Close Proximity ◽  
Volume Method

Sustainability in the construction industry is a global concern, and one way of handling this is the idea of recycling old concrete rubbles in the production of fresh concrete. Recycled aggregate concrete is normally classified as light weight concrete and recommended for use in production of low-grade non-structural elements. This study examined the properties of crushed old concrete cubes as replacement for natural aggregate. Five specimens 150x150mm concrete cubes with varying percentages of coarse recycled aggregate of 0 %( control), 25, 50, 75 and 100% were prepared. All the mixes were proportioned using the absolute volume method with a targeted compressive strength of 30N/mm2 and varying w/c ratio. The result shows that with up to 75% replacement of natural aggregate with recycled aggregate, the 28 days compressive strength of concrete is in close proximity with that of normal concrete. While the strength of exclusive recycled aggregate concrete is about 15% lesser than that of exclusive natural aggregate. The result of this research confirms that crushed old concrete cubes can be safely used in the production of high grade concrete.

EFFECT OF DIFFERENT TYPES OF FIBER UTILIZATION ON MECHANICAL PROPERTIES OF RECYCLED AGGREGATE CONCRETE CONTAINING SILICA FUME

2020 ◽  
Vol 15 (1) ◽  
pp. 119-136 ◽  
Author(s):  
Muhammet Gökhan Altun ◽  
Meral Oltulu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Steel Fiber ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Hybrid Fibers ◽  
Normal Concrete ◽  
Aggregate Concrete ◽  
Volume Fractions ◽  
Coarse Aggregates

ABSTRACT The use of recycled aggregate (RA) instead of natural aggregate (NA) in concrete is necessary for environmental protection and the effective utilization of resources. The addition of recycled aggregates in concrete increases shrinkage, porosity and decreases the mechanical properties compared to that of normal concrete. This study was aimed at investigating how the addition of various proportions of polypropylene and steel fiber affect the mechanical properties of recycled aggregate concrete (RAC). The natural coarse aggregates (NCAs) used in the production of normal concrete (NC) were replaced in 30% and 50% proportions by recycled coarse aggregates (RCAs) obtained from the demolished buildings. In this case, a polypropylene fiber (PF) content of 0.1% and steel fiber (SF) 1% and 2% volume fractions were used, along with hybrid fibers-a combination of the two. While the material performance of RAC compared to NC is analyzed by reviewing existing published literature, it is not evident what the use of RCAs and hybrid fibers have on the mechanical properties of concrete. The results showed that the compressive strength, flexural strength and impcat resistance of RAC were reduced as the percentage of RCAs increased. It was observed that the compressive strength was increased with the addition of 1% steel fiber in the RAC. The flexural and impact performance of steel fiber-reinforced concrete (Specimens NC and RAC) was increased as the volume fractions of steel fiber increased. The hybrid fiber reinforced concretes showed the best results in their mechanical performance of all the concrete groups.

Microscopic Analysis and Experimental Research on Thermal Mechanical Behavior of Natural Aggregate Concrete

2010 ◽  
Vol 129-131 ◽  
pp. 1039-1042
Author(s):  
H.Q. Yan ◽  
Q.Y. Wang
Keyword(s):  
Compressive Strength ◽  
High Temperature ◽  
Mechanical Behavior ◽  
Microscopic Analysis ◽  
Test Methods ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Strength Analysis ◽  
Aggregate Concrete ◽  
Natural Aggregate

Reinforced concrete construction is very common recently and extensively used both in industrial and commercial buildings. With the gradual rise in occurrences of fire accidents in recent years, a more thorough and quantitative understanding of the damage phenomenon in concrete structures is required. However, the mechanical behavior of concrete could actually be more complex under high temperature conditions than at room temperature. Restoration and reinforcement of the structures exposed to fire may have to be based on residual strength analysis and therefore require a correlation between temperature and mechanical properties. Thus, in order to meet the modern challenges of rapid engineering advances and societal development, further research on the concrete material and its structural behavior at high temperatures becomes extremely important. The present paper deals with investigations on the effect of high temperature exposure on the compressive strength of natural aggregate concrete. Experiments were conducted to study the compressive strength variations with increasing temperatures, up to 700 °C, and the subsequent cooling modes such as natural and spray cooling. Results show that the compressive strength gradually decreases with increasing temperatures. And micro-structural observations of the concrete specimens by means of scanning electron microscopy (SEM) were obtained. These test methods and results can be used for analyzing and investigating the behavior of recycled aggregate concrete with increasing temperatures.

scholarly journals Utilization of Demolished Waste as Coarse Aggregate in Concrete

2019 ◽  
Vol 5 (3) ◽  
pp. 540 ◽  
Author(s):  
Abdulsamee M Halahla ◽  
Mohammad Akhtar ◽  
Amin H. Almasri
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Recycled Concrete ◽  
International Standards ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Test Results ◽  
Aggregate Concrete ◽  
Natural Aggregate ◽  
Concrete Building

Demolishing concrete building usually produces huge amounts of remains and wastes worldwide that have promising possibilities to be utilized as coarse aggregate for new mixes of concrete. High numbers of structures around the world currently need to be removed for several reasons, such as reaching the end of the expected life, to be replaced by new investments, or were not built by the local and international standards. Maintaining or removal of such structures leads to large quantities of concrete ruins. Reusing these concrete wastes will help in saving landfill spaces in addition to more sustainability in natural resources. The objective of this study is to investigate the possibility of using old recycled concrete as coarse aggregate to make new concrete mixes, and its effect on the evolution of the compressive strength of the new concrete mixes.  Core samples for demolished concrete were tested to determine its compressive strength. The core test results can be thought of as aggregate properties for the new concrete. Then, the compressive strength and splitting tensile strength of the new recycled aggregate concrete (RAC) were determined experimentally by casting a cubes and cylinders, respectively. It was found that the evolution of compressive strength of recycled aggregate concrete is similar in behavior to the concrete with natural aggregate, except that it is about 10% lower in values. It was also seen that water absorption for recycled aggregate is noticeably higher than that for natural aggregate, and should be substituted for in the mix design.

scholarly journals Study the effect of vibration mixing on the performances of full replacement recycled aggregate concrete

2021 ◽  
Vol 276 ◽  
pp. 02027
Author(s):  
Taotao Li
Keyword(s):  
Compressive Strength ◽  
Solid Waste ◽  
Building Materials ◽  
Engineering Application ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Carbonation Depth ◽  
Aggregate Concrete ◽  
Natural Aggregate ◽  
Splitting Strength

It is an urgent problem that the construction solid waste is difficult to be treated, and its recycling provides a way for its treatment. The quality of construction solid waste recycled aggregate is lower than that of natural aggregate, which limits its extensive application in building materials. In order to provide a new method for engineering application of recycled aggregate concrete, the influence of vibration mixing on the performances of full replacement recycled aggregate concrete were studied. The performance indexes of recycled aggregate concrete under ordinary mixing and vibration mixing were compared and analyzed. The experimental results show that compared with natural aggregate concrete, the slump of full replacement recycled aggregate concrete decreased by 58.8%, and 7d and 28d compressive strength decreased by 12.9% and 16.1%, and the splitting strength decreased by 30.6% and 20.1%, and the carbonation depth decreased by 91.5%; Compared with natural aggregate concrete using ordinary mixing, the slump of full replacement recycled aggregate concrete using vibration mixing decreased by 50.9%, the 7d and 28d compressive strength decreased by 6.9% and 10.9%, and the splitting strength decreased by 16.9% and 12.4%, and the 28d carbonation depth decreased by 34.9%. The results show that compared with ordinary mixing, vibration mixing can improve the performance of recycled aggregate concrete, which provides a reference for engineering application.

Effect of nanocomposite slurry on strength development of fully recycled aggregate concrete

2021 ◽  
pp. 136943322199248
Author(s):  
Tao Meng ◽  
Song-lin Yu ◽  
Huadong Wei ◽  
Sheng Zhu
Keyword(s):  
Compressive Strength ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Strength Development ◽  
Aggregate Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Natural Aggregate ◽  
Enhancement Method

Recycled concrete has been widely used in construction because of the gradual shortage of natural aggregate resources and the large amount of construction waste. In this study, concrete with 100% recycled aggregate was prepared, and its properties, microtopography, and potential enhancement method were investigated. The results indicated that the mechanical properties of the fully recycled aggregate concrete (FRC) were significantly inferior to the natural aggregate concrete. The compressive strength of the FRC with a water-cement ratio of 0.6 was noticeably improved by spraying a nanocomposite slurry on recycled aggregate, whereas this had little influence when the water-cement ratio was 0.3. The compressive strength of the FRC with a water-cement ratio of 0.3 could be improved by mixing with strengthening materials. The best improvement in the compressive strength of the concrete was observed at 28 days because a membrane covered the surface of the aggregate, creating a bond between the aggregate and cement, filling the pores between them, and compacting the concrete. This paper reports a prospective method for improving the properties of FRC, which will promote the application of recycled aggregate in industry.

scholarly journals Effect of Recycled Concrete Aggregates on Compressive Strength and Water Permeability of Concrete

2020 ◽  
Vol 14 ◽  
Keyword(s):  
Compressive Strength ◽  
Negative Impact ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Aggregate Concrete ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Coarse Aggregates ◽  
Natural Aggregates

This paper discusses the effects of recycled concrete aggregates (RCA) on compressive strength and permeability of recycled aggregate concrete (RAC) by using recycled concrete aggregates as a replacement of natural coarse aggregates (NCA). Four replacement percentages were used to study the effect of replacement. Replacement percentages used were 30%, 50%, 70% and 100% with 0% replacement was used as control. Mix design of 1:1.24:2.6 was used in the study with water to cement ratio of 0.43. Influence of RCA on compressive strength was determined for all the mixes as per ASTM C39 standard. The permeability of all the mixes was determined by measuring absorption, sorptivity and Darcy’s coefficient. Results of compressive strength indicated that concrete with 30% replacement of NCA can be successfully used in structural concrete without compromising too much on strength. Whereas, the replacement of natural aggregates with RCA has a negative impact on the permeability of concrete at all replacement levels. Absorption, sorptivity and permeability of natural aggregate concrete is lower as compared to RAC with 30% replacement showing the better performance as compared to other replacement ratios.

Recycled Aggregate Concrete Mixture Proportion Method Based on Pulp Content

2014 ◽  
Vol 584-586 ◽  
pp. 1425-1431
Author(s):  
Qing Han ◽  
Zong Ming Jia ◽  
Dong Ye Sun
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Splitting Tensile Strength ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Concrete Mixture ◽  
Concrete Compressive Strength ◽  
Aggregate Concrete ◽  
Proportion Method ◽  
The Relationship

Putting forward a new recycled aggregate concrete mixture proportion method based on the pulp content by researching the effect of pulp content on recycled coarse aggregate physical properties .Research on the cube compressive strength and splitting tensile strength of recycled aggregate concrete by the proposed method and results showed that:The proposed method can reduce the dosage of cement and sand, and increase the recycled aggregate concrete compressive strength and splitting tensile strength ;Establishing the relationship formula between splitting tensile strength and compressive strength of recycled aggregate concrete upon a large number of experimental data.

scholarly journals Feasibility of Using Nanoparticles of SiO2 to Improve the Performance of Recycled Aggregate Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Khaleel H. Younis ◽  
Shelan M. Mustafa
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Water Absorption ◽  
Splitting Tensile Strength ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Demolition Waste ◽  
Aggregate Concrete ◽  
Natural Aggregate

The aim of this paper was to examine the feasibility of using nanoparticles of SiO2 (nanosilica) to improve the performance of recycled aggregate concrete (RAC) containing recycled aggregate (RA) derived from processing construction and demolition waste of concrete buildings. The examined properties include compressive strength, splitting tensile strength, and water absorption. The study also includes examining the microstructure of RA and RAC with and without nanoparticles of SiO2. In total, nine mixes were investigated. Two mixes with RA contents of 50% and 100% were investigated and for each RA content; three mixes were prepared with three different nanoparticles dosages 0.4%, 0.8%, and 1.2% (by mass of cement). A control mix with natural aggregate (NA) was also prepared for comparison reasons. The results show that nanoparticles of silica can improve the compressive strength, tensile strength, reduce the water absorption, and modify the microstructure of RAC.

Sign in / Sign up

Export Citation Format

Share Document