scholarly journals Mechanical Properties of Carbon Fiber-Reinforced Polymer Concrete with Different Polymer–Cement Ratios

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3530 ◽  
Author(s):  
Gao-Jie Liu ◽  
Er-Lei Bai ◽  
Jin-Yu Xu ◽  
Ning Yang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Carbon Fiber ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Polymer Concrete ◽  
Fiber Reinforced ◽  
Cement Ratio ◽  
Reinforced Polymer

To study the effect of redispersible polymer emulsion powder on the mechanical properties of carbon fiber-reinforced polymer concrete (CFRPC), the compressive, flexural, and splitting tests of CFRPC specimens with different polymer–cement ratios (polymer–cement mass ratios) were performed in this study. The modification effect of emulsion powder on CFRPC was analyzed from the perspectives of the strength and deformation properties of the specimens. The results show that the static properties of CFRPC increased first and then decreased with the increase of the polymer–cement ratio, in which the splitting tensile strength had the most significant increase; the flexural strength took second place and the compressive strength had a slight increase. When the polymer–cement ratio was 8%, the flexural and splitting tensile strength of the CFRPC specimens increased significantly by 36% and 61%, respectively. According to electron microscopy images, adding emulsion powder can effectively improve the structure of fiber–matrix transition zones and enhance the bond property between fibers and the matrix.

scholarly journals Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air

2019 ◽  
Vol 14 ◽  
pp. 155892501985001 ◽  
Author(s):  
Chenggao Li ◽  
Guijun Xian
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Carbon Fibers ◽  
Elevated Temperatures ◽  
Tensile Modulus ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

The elevated temperature resistance and even fire resistance of carbon fiber-reinforced polymer composites were critical concerns in many applications. These properties of a carbon fiber-reinforced polymer depend not only on the degradation of the polymer matrix but also on that of the carbon fibers under elevated temperatures. In this study, influences of elevated temperatures (by 700°C for 30 min) in air on the mechanical properties and microstructures of a carbon fiber were investigated experimentally. It was found that the tensile strength and modulus as well as the diameters of the carbon fibers were reduced remarkably when the treatment temperatures exceeded 500°C. At the same time, the content of the structurally ordered carbonaceous components on the surface of carbon fibers and the graphite microcrystal size were reduced, while the graphite interlayer spacing ( d002) was enhanced. The deteriorated tensile modulus was attributed to the reduced graphite microcrystal size and the reduced thickness of the skin layer of the carbon fiber, while the degraded tensile strength was mainly attributed to the weakened cross-linking between the graphite planes.

scholarly journals Study of Mechanical Properties of an Eco-Friendly Concrete Containing Recycled Carbon Fiber Reinforced Polymer and Recycled Aggregate

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4592
Author(s):  
Chen Xiong ◽  
Tianhao Lan ◽  
Qiangsheng Li ◽  
Haodao Li ◽  
Wujian Long
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Fiber Reinforced Polymer ◽  
Recycled Aggregate ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Flexural Performance ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

This study investigates the feasibility of collaborative use of recycled carbon fiber reinforced polymer (RCFRP) fibers and recycled aggregate (RA) in concrete, which is called RCFRP fiber reinforced RA concrete (RFRAC). The mechanical properties of the composite were studied through experimental investigation, considering different RCFRP fiber contents (0%, 0.5%, 1.0%, and 1.5% by volume) and different RA replacement rates (0%, 10%, 20%, and 30% by volume). Specifically, ten different mixes were designed to explore the flowability and compressive and flexural strengths of the proposed composite. Experimental results indicated that the addition of RCFRP fibers and RA had a relatively small influence on the compressive strength of concrete (less than 5%). Moreover, the addition of RA slightly decreased the flexural strength of concrete, while the addition of RCFRP fibers could significantly improve the flexural performance. For example, the flexural strength of RA concrete with 1.5% RCFRP fiber addition increased by 32.7%. Considering the good flexural properties of the composite and its potential in reducing waste CFRP and construction solid waste, the proposed RFRAC is promising for use in civil concrete structures with high flexural performance requirements.

scholarly journals Anodic and Mechanical Behavior of Carbon Fiber Reinforced Polymer as a Dual-Functional Material in Chloride-Contaminated Concrete

Materials ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 222
Author(s):  
Liangliang Wei ◽  
Ji-Hua Zhu ◽  
Zhijun Dong ◽  
Jun Liu ◽  
Wei Liu ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Mechanical Behavior ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Functional Material ◽  
Dual Functional ◽  
Reinforced Polymer ◽  
Chloride Contaminated

Carbon fiber reinforced polymer (CFRP) has been used as a dual-functional material in a hybrid intervention system (ICCP-SS) which integrates the impressed current cathodic protection (ICCP) and structural strengthening (SS). The mechanical behavior of CFRP as an anode has been investigated in some solution environments. However, the anodic and mechanical behavior of CFRP bonded to concrete is unclear. This paper focuses on the anodic and mechanical performance of CFRP bonded to the chloride-contaminated concrete by conducting an electrochemical (EC) test. The method of bonding the CFRP to the concrete and the shape of the steel embedded in the concrete were considered. The current densities of 20 mA/m2 and 100 mA/m2 were applied during 120-day and 310-day EC tests. The electrode potentials and driving voltages were recorded, and the bond interfaces of the CFRP were inspected after EC test. The residual tensile strength and failure modes of the CFRP were analyzed after tensile tests. Finally, the long-term performance of CFRP as a dual-functional material in ICCP-SS system was discussed. Results show that the externally bonding CFRP in ICCP-SS system can not only protect the steel in chloride-contaminated concrete effectively but also maintain 70% of the original tensile strength of CFRP at a charge density of 744 A·h/m2. The expected service period of CFRP as a dual-functional material bonded to the chloride-contaminated concrete was determined to be more than 42.5 years.

Sign in / Sign up

Export Citation Format

Share Document