scholarly journals Experimental Investigation of Impactor Diameter Effect on Low-Velocity Impact Response of CFRP Laminates in a Drop-Weight Impact Event

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4131 ◽  
Author(s):  
Hongyi Cao ◽  
Mengyuan Ma ◽  
Mingshun Jiang ◽  
Lin Sun ◽  
Lei Zhang ◽  
...  
Keyword(s):  
Impact Energy ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Internal Damage ◽  
Velocity Impact ◽  
Damage Characteristics ◽  
The Impact ◽  
Dent Depth ◽  
Delamination Area

The present study delved into the effect of impactor diameter on low velocity impact response and damage characteristics of CFRP. Moreover, the phased array ultrasonic technique (PAUT) was adopted to identify the impact damages based on double-sided scanning. Low-velocity impact tests were carried out using three hemispherical impactors with different diameters. The relationship of impact response and impactor diameters was analyzed by ultrasonic C-scans and S-scans, combined with impact response parameters. Subsequently, the damage characteristics were assessed in terms of dent depth, delamination area and extension shape via the thickness, and the relationships between absorbed energy, impactor displacement, dent depth and delamination area were elucidated. As revealed from experiment results, double-sided PAUT is capable of representing the internal damage characteristics more accurately. Moreover, the impactor diameter slightly affects the impact response under small impact energy, whereas it significantly affects the impact response under large impact energy.

Response and failure modes of biaxial warp-knitted flexible composite subject to low-velocity impact

2021 ◽  
pp. 152808372110154
Author(s):  
Ziyu Zhao ◽  
Tianming Liu ◽  
Pibo Ma
Keyword(s):  
Impact Energy ◽  
Linear Density ◽  
Failure Modes ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Minor Effect ◽  
Low Velocity ◽  
Velocity Impact ◽  
Flexible Composites ◽  
The Impact

In this paper, biaxial warp-knitted fabrics were produced with different high tenacity polyester linear density and inserted yarns density. The low-velocity impact property of flexible composites made of polyurethane as matrix and biaxial warp-knitted fabric as reinforcement has been investigated. The effect of impactor shape and initial impact energy on the impact response of flexible composite is tested. The results show that the initial impact energy have minor effect on the impact response of the biaxial warp-knitted flexible composites. The impact resistance of flexible composite specimen increases with the increase of high tenacity polyester linear density and inserted yarns density. The damage morphology of flexible composite materials is completely different under different impactor shapes. The findings have theoretical and practical significance for the applications of biaxial warp-knitted flexible composite.

Effect of Foam Core Density and Facesheet Thickness on the Low Velocity Impact Response of Foam Core Sandwich Composites

2000 ◽  
Author(s):  
M. Motuku ◽  
R. M. Rodgers ◽  
S. Jeelani ◽  
U. K. Vaidya
Keyword(s):  
Impact Energy ◽  
Maximum Load ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Foam Core ◽  
Low Velocity ◽  
Core Density ◽  
Failure Characteristics ◽  
Velocity Impact ◽  
The Impact

Abstract The effect of foam core density and facesheet thickness on the low velocity impact response and damage evolution in homogeneous foam core sandwich composites was studied. The failure characteristics, initiation and evolution of damage as well as the effect of impact energy were investigated. A Dynatup 8210 Impact Test Machine was utilized to conduct the low-velocity impact tests. Characterization of the impact response was performed by comparing the impact load histories, impact plots and failure characteristics. Fractography analysis was conducted through the use of scanning electron microscopy (SEM) and optical microscopy. Three types of foam cores with different densities, namely Airlite B12.5, Rohacell IG-71R63 and Airex R63.5 foam cores, were used to study the effect of core density. Considering four groups of facesheets made of different layers of cross-ply carbon prepregs performed the effect of facesheet thickness. For all the facesheet thicknesses (0.011-0.894-cm thick) and impact energy (11-40 J) range considered in this study, the maximum load (Pm), deflection-at-maximum load (δm) and time-to-maximum load (tm) exhibited strong influence or dependence on the type of foam core as opposed to the facesheet thickness. The energy-to-maximum load (Em), total energy absorbed (Et) and total energy-to-impact energy (Et/Eimp) ratio became less sensitive on the foam core density (or type) with increasing facesheet thickness. A transition point from foam core to facesheet controlled impact behavior as a function of impact energy level was observed. The impact parameters varied either linearly or parabolically with impact energy depending on the impact energy level, type of foam core and facesheet thickness. Excellent repeatability of impact data was generally obtained with increase in foam core density.

Effect of Graphene Platelets/Fiber on Plastics Nanocomposites under Low-Velocity Impact Response

2016 ◽  
Vol 852 ◽  
pp. 23-28
Author(s):  
S. Subha ◽  
Battu Sai Krishna ◽  
Dalbir Singh ◽  
R. Gokulnath
Keyword(s):  
Energy Absorption ◽  
Impact Energy ◽  
Laminate Plate ◽  
Absorption Capacity ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Energy Absorption Capacity ◽  
Velocity Impact ◽  
The Impact

In this study, an attempt has made to explore the low-velocity impact response of a Carbon/epoxy laminate (CFRP) and E-Glass/epoxy laminates (GFRP). The composite was reinforced with Graphene Nanoplatelets (GnPs) and impact energy absorption capacity was studied. The plain GFRP and plain CFRP were served as a baseline for comparison. These composite laminate plates were fabricated using hand layup technique. The tests were carried out on the laminate plate as per ASTM D5628 FD. Impact tests were performed using a specially designed vertical drop-weight testing machine with an impactor mass of 1.926 kg. The result shows that laminate plate reinforced with GnPs reinforcement enhances the impact energy absorption capacity of the composites almost 4.5 % in the case Carbon/epoxy laminate and 3.5 % in the case of and E-glass/epoxy laminate. The enhanced impact resistance could be attributed to increased interlaminar fracture toughness of the fibres.

Experimental Research on the Low Velocity Impact Damage of CCF300/QY8911 Composite Laminates

2012 ◽  
Vol 583 ◽  
pp. 179-182
Author(s):  
Hai Ming Hong ◽  
Ming Li ◽  
Jian Yu Zhang ◽  
Yi Ning Zhang
Keyword(s):  
Impact Energy ◽  
Composite Laminates ◽  
Low Velocity Impact ◽  
Test Machine ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Pattern ◽  
The Impact ◽  
Dent Depth ◽  
Delamination Damage

A group of low-velocity impact tests on CCF300/QY8911 composite laminates were implemented by the low-velocity drop hammer test machine. The dent depth and the internal damage pattern with corresponding impact energy were studied, the internal delamination damage state of laminates after impact were observed through thermal layer exposing tests, and the mechanism of low-velocity impact delamination damage were discussed. The results indicated that there existed a significant inflection point in the curve of impact energy verse dent depth of CCF300/QY8911 composite material, which was also the transition point of different damage patterns. When the impact energy was smaller than the inflection energy, the damage pattern consisted mainly of matrix flaws and delamination damages, but when the impact exceeded the inflection energy, delamination damage hardly expanded while the expansion of damage was mainly fiber break.

scholarly journals Experimental and numerical study of the response to various impact energy levels for composite sandwich plates with different face thicknesses

2019 ◽  
Vol 21 (5) ◽  
pp. 1654-1682
Author(s):  
Moeen S Rajput ◽  
Magnus Burman ◽  
Fredrik Forsberg ◽  
Stefan Hallström
Keyword(s):  
Impact Energy ◽  
Impact Damage ◽  
Energy Levels ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Absorbed Energy ◽  
Low Velocity ◽  
Composite Sandwich ◽  
The Impact ◽  
Dent Depth

Composite sandwich structures find wide application in the aerospace sector thanks to their lightweight characteristics. However, composite structures are highly susceptible to low-velocity impact damage and therefore thorough characterization of the impact response and damage process for the used material configurations is necessary. The present study investigates the effect of face-sheet thickness on the impact response and damage mechanisms, experimentally and numerically. A uni-directional, non-crimp fabric is used as reinforcement in the face-sheets, and a closed cell Rohacell 200 Hero polymer foam is used as core material. Low-velocity impact tests are performed in a novel instrumented drop-weight rig that is able to capture the true impact response. A range of impact energies are initially utilized in order to identify when low level damage (LLD), barely visible impact damage (BVID) and visible impact damage (VID) occur. A thorough fractography investigation is performed to characterize the impact damage using both destructive and non-destructive testing. The damage from the impacts in terms of dent depth, peak contact force, deflection and absorbed energy is measured. The results show bilinear responses in dent depth vs. impact energy and absorbed energy vs. impact energy. It is found than the BVID energy works well as an indication for the onset of excessive damage. Fractography reveals that there is a failure mode shift between the LLD and the VID energy levels, and that delaminations predominantly grow along the fiber direction and rotate in a spiral pattern through the thickness, following the laminate ply orientations. Finally, a progressive damage finite element model is developed to simulate both the impact response and the delamination extent, incorporating both intra-laminar and inter-laminar damage modes. The simulation shows good agreement with the experiments.

scholarly journals Structural Damage Characteristics of a Layer-to-Layer 3-D Angle-Interlock Woven Composite Subjected to Drop-Weight Impact

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Qian Ma ◽  
Ke Wang ◽  
Shudong Wang ◽  
Yiwei Ouyang ◽  
Zhiqiang Lin ◽  
...  
Keyword(s):  
Energy Absorption ◽  
Impact Energy ◽  
Structural Damage ◽  
Low Velocity Impact ◽  
Woven Composite ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Characteristics ◽  
Drop Weight ◽  
The Impact

AbstractThe most attractive structural feature of the three-dimensional (3D) angle-interlock woven structure is that the straight weft yarns are bundled by the undulated warp yarns, which induces the overall good structural stability and a stable fabric structure. Thus the 3-D angle-interlock woven composite (3DAWC) prepared by the vacuum-assisted resin transfer molding (VARTM) curing process has excellent mechanical properties by using the fabric and epoxy resin as the reinforcement and matrix, respectively. The low-velocity impact damage properties of the composites under different drop-weight energies (70, 80, and 100 J) were tested experimentally. The load–displacement curves, energy–time curves, and the ultimate failure modes were obtained to analyze the performance of resistance to low-velocity impact, as well as the impact energy absorption effect and failure mechanism, especially the structural damage characteristics of the 3DAWC subjected to the low-velocity impact of drop weight. By analyzing the obtained experimental results, it is found that the fabric reinforcement is the primary energy absorption component and the impact energy mainly propagates along the longitudinal direction of the yarns, especially the weft yarn system, which is arranged in a straight way. In addition, as the impact energy increases, the energy absorbed and dissipated by the composite increases simultaneously. This phenomenon is manifested in the severity of deformation and damage of the material, i.e., the amount of deformation and size of the damaged area.

Low-Velocity Impact Damage Prediction of Composite Laminates Using Linearized Contact Law

2007 ◽  
Vol 334-335 ◽  
pp. 261-264
Author(s):  
Ik Hyeon Choi
Keyword(s):  
Failure Criterion ◽  
Composite Laminates ◽  
Impact Damage ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Response Analysis ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact ◽  
Delamination Area

Recently, author had presented that impact force history of composite laminates subjected to low-velocity impact could be well analyzed using linearized contact law instead of the modified Hertzian contact law. If the linearized contact law concept is applied in impact response analysis, the impact problem can be transformed as a general structural analysis problem, so general purpose FEM software can be used in this kind of impact response analysis. In the present study it will be shown that impact damage, specially delamination area, as well as impact response can be well analyzed using the linearized contact law concept. In order to accurately predict delamination area, geometrical nonlinear analysis considering large deflection effect of plate has been performed and thermal stress analysis to consider thermal residual strain induced in curing process has been performed. Also, a proper failure criterion for delamination estimation has been used. In this failure criterion, in-situ strength values, obtained through matrix crack onset analysis have been used. Finally, analytically predicted delamination areas have been compared with experimental results. It shows that this analytical procedure can well predict delamination area of composite laminates subjected to the low-velocity impact.

Influence of patch lay-up configuration and hybridization on low velocity impact and post-impact tensile response of repaired glass fiber reinforced plastic composites

2018 ◽  
Vol 53 (1) ◽  
pp. 3-17 ◽  
Author(s):  
J Jefferson Andrew ◽  
Sivakumar M Srinivasan ◽  
A Arockiarajan
Keyword(s):  
Glass Fiber ◽  
Impact Energy ◽  
Volume Fraction ◽  
Glass Fibers ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Static Tensile ◽  
The Impact

This paper aims to investigate the effect of homogenous and hybrid external patches based on plain weave woven glass and Kevlar fabric on low velocity impact and quasi-static tensile after impact response of adhesively bonded external patch repairs in damaged glass/epoxy composite laminates. In all hybrid patches, the proportion of Kevlar and glass fibers were equal (i.e. 50% of Kevlar and 50% of glass by volume fraction), while lay-up configuration was different. This further enables to study the associated effect of hybridization and lay-up configuration on impact response of the repaired laminates. The intent of using hybrid external patches is to combine the excellent high displacement-to-failure property of Kevlar fiber as a ductile reinforcement with the superior mechanical property of glass fiber as a brittle reinforcement. The effect of glass/Kevlar content on impact response and tensile after impact response was investigated for various incident impact energy levels, such as 2, 4, 6, and 8 J. Results showed that hybridization and lay-up configurations of the external patches played a significant role on low velocity impact and quasi-static tensile after impact response of the repaired glass/epoxy specimens. Specimens repaired using intra-ply hybrid patches showed better impact properties and damage tolerance capability than that of the virgin and other repaired specimens. In specific, the use of intra-ply hybrid patches reduced the impact energy absorption by 10.17% in comparison to the virgin specimens at impact energy of 8 J.

Effect of SiO2 Nanoparticles on the Mechanical and Low Velocity Impact Properties of Epoxy/Glass Composites

2016 ◽  
Vol 838 ◽  
pp. 29-35
Author(s):  
Michał Landowski ◽  
Krystyna Imielińska
Keyword(s):  
Flexural Strength ◽  
Energy Absorption ◽  
Impact Energy ◽  
Epoxy Matrix ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Nanoparticle Suspension ◽  
Impact Properties ◽  
Velocity Impact ◽  
The Impact

Flexural strength and low velocity impact properties were investigated in terms of possibile improvements due to epoxy matrix modification by SiO2 nanoparticles (1%, 2%, 3%, 5%, 7%wt.) in glass/epoxy laminates formed using hand lay-up method. The matrix resin was Hexion L285 (DGEBA) with Nanopox A410 - SiO2 (20 nm) nanoparticle suspension in the base epoxy resin (DGEBA) supplied by Evonic. Modification of epoxy matrix by variable concentrations of nanoSiO2 does not offer significant improvements in the flexural strength σg, Young’s modulus E and interlaminar shear strength for 1% 3% and 5% nanoSiO2 and for 7% a slight drop (up to ca. 15-20%) was found. Low energy (1J) impact resistance of nanocomposites represented by peak load in dynamic impact characteristics was not changed for nanocompoosites compared to the unmodified material. However at higher impact energy (3J) nanoparticles appear to slightly improve the impact energy absorption for 3% and 5%. The absence or minor improvements in the mechanical behaviour of nanocomposites is due to the failure mechanisms associated with hand layup fabrication technique: (i.e. rapid crack propagation across the extensive resin pockets and numerous pores and voids) which dominate the nanoparticle-dependent crack energy absorption mechanisms (microvoids formation and deformation).

Compressive Strength of CCF300/QY8911 Composite Laminates with LVI Damage

2012 ◽  
Vol 583 ◽  
pp. 203-206
Author(s):  
Hai Ming Hong ◽  
Ming Li ◽  
Jian Yu Zhang ◽  
Yi Ning Zhang
Keyword(s):  
Compressive Strength ◽  
Impact Energy ◽  
Composite Laminates ◽  
Inflection Point ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Damage Area ◽  
Compressive Performance ◽  
The Impact ◽  
Dent Depth

A series of low-velocity impact tests and residual compressive strength tests after impacts on CCF300/QY8911 composite materials were carried out to study the mechanism of compression failure of the laminates after low-velocity impact. The curves of impact energy verse dent depth and impact energy verse the damage area was obtained. And the residual compressive strength and stiffness after impact verse damage parameters were analyzed. The results showed that when the impact energy exceeded the inflection point, as the impact energy increased, the dent depth on the impacted surface of the laminates notably increased while the damage area of the internal layers merely increased slowly. If the impact energy was continued to increase, the expansion of the laminates' internal damage mainly consisted of fiber breaks. The main reason for the decrease in compressive performance of composite laminates was inside delamination between layers, while in the case in which impact energy exceeded the inflection point, there were no obvious changes in delamination damage area for different energy, so the residual compressive performance kept almost stable.

Sign in / Sign up

Export Citation Format

Share Document