scholarly journals An In Vitro–In Vivo Simulation Approach for the Prediction of Bioequivalence

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 555
Author(s):  
Marilena Vlachou ◽  
Vangelis Karalis
Keyword(s):  
Mathematical Description ◽  
Development Process ◽  
Bioequivalence Study ◽  
In Vitro Dissolution ◽  
Monte Carlo Techniques ◽  
In Vivo Kinetics ◽  
Probability Of Success ◽  
Made In

The aim of this study was to develop a new in vitro–in vivo simulation (IVIVS) approach in order to predict the outcome of a bioequivalence study. The predictability of the IVIVS procedure was evaluated through its application in the development process of a new generic product of amlodipine/irbesartan/hydrochlorothiazide. The developed IVIVS methodology is composed of three parts: (a) mathematical description of in vitro dissolution profiles, (b) mathematical description of in vivo kinetics, and (c) development of joint in vitro–in vivo simulations. The entire programming was done in MATLAB® and all created scripts were validated through other software. The IVIVS approach can be implemented for any number of subjects, clinical design, variability and can be repeated for thousands of times using Monte Carlo techniques. The probability of success of each scenario is recorded and finally, an overall assessment is made in order to select the most suitable batch. Alternatively, if the IVIVS shows reduced probability of BE success, the R&D department is advised to reformulate the product. In this study, the IVIVS approach predicted successfully the BE outcome of the three drugs. During the development of generics, the IVIVS approach can save time and expenses.

scholarly journals BIOEQUIVALENCE STUDY OF ANTIDIABETIC ACTIVITY BETWEEN TWO MARKETED FORMULATIONS OF METFORMIN ON GLUCOCORTICOID-INDUCED HYPERGLYCEMIA IN RABBIT

2017 ◽  
Vol 9 (4) ◽  
pp. 47
Author(s):  
Debanga Das ◽  
Jashabir Chakraborty ◽  
Suvakanta Dash
Keyword(s):  
Blood Glucose ◽  
Normal Saline ◽  
Bioequivalence Study ◽  
In Vitro Dissolution ◽  
Antidiabetic Activity ◽  
Control Group ◽  
In Vitro Tests ◽  
Weight Variation

Objective: Bioequivalence studies are the commonly accepted methods displaying therapeutic equivalence between two products. This study was conducted to evaluate the bioequivalence study of anti-diabetic activity between two formulations of metformin tablets which were marketed in India.Methods: In in vitro study five essential in vitro tests including disintegration, weight variation, hardness, friability and a comparative in vitro dissolution study were performed.Results: For in vivo study adult male rabbits were divided into three groups of two each. The first group is regarded as control group received 3 ml of normal saline daily by using the gastric tube for 15 d and the second and third group received (0.35 mg/Kg B.W. single dosage) of dexamethasone tablets which were powdered, dissolved in 3 ml of normal saline daily for 15 d. After 15 d the blood glucose of second and third group was estimated and after that received formulation X and formulation Y, dissolved in 3 ml of normal saline daily for 15 d at the dose of 0.5 gm/kg body weight orally. After 15 d again blood glucose of second and third group was estimated and compare the results of both the group. This shows the favourable response of metformin against glucocorticoid-induced renal damage and hyperglycemia.Conclusion: Results of this study showed that the extent, rate of absorption and anti-diabetic activity of two different formulations of metformin tablets are bioequivalent to each other.

Bioequivalence Study Between Two Extended-Release Formulations of Theophylline Using Saliva

1997 ◽  
Vol 13 (4) ◽  
pp. 177-180
Author(s):  
Helena M Payssé ◽  
Marta Vázquez ◽  
Pietro L Fagiolino
Keyword(s):  
Extended Release ◽  
Bioequivalence Study ◽  
Average Concentration ◽  
Crossover Design ◽  
In Vitro Dissolution ◽  
Dissolution Test ◽  
Tablet Form ◽  
Extended Release Formulations

Objective: To assess the bioequivalence between two extended-release formulations of theophylline using saliva as the biologic fluid. Design: Randomized two-way crossover design. Participants: Eight healthy, nonsmoking volunteers (7 women, 1 man) between 23 and 41 years of age took a single dose (250 mg) of two extended-release formulations of theophylline (form A, tablet; form B, capsule). Results: Significant differences were found at 2, 4, 6, and 8 hours (p < 0.001), with the in vitro dissolution test between both formulations. ANOVA for AUC, maximum concentration (Cmax), average concentration, and %Cmax – 100 showed significant differences between both formulations in the in vivo trial. Conclusions: The tablet and capsule formulations of extended-release theophylline are bioinequivalent when saliva is used as the biologic fluid for performing these studies.

Significance of In-Vitro and In-Vivo Correlation in Drug Delivery System

2018 ◽  
Vol 4 (4) ◽  
pp. 523-531
Author(s):  
Hina Mumtaz ◽  
Muhammad Asim Farooq ◽  
Zainab Batool ◽  
Anam Ahsan ◽  
Ashikujaman Syed
Keyword(s):  
Dosage Form ◽  
Pharmaceutical Preparations ◽  
Pharmacokinetic Profile ◽  
In Vitro Dissolution ◽  
Time Saving ◽  
Pharmaceutical Dosage Form ◽  
Short Period ◽  
Form Development

The main purpose of development pharmaceutical dosage form is to find out the in vivo and in vitro behavior of dosage form. This challenge is overcome by implementation of in-vivo and in-vitro correlation. Application of this technique is economical and time saving in dosage form development. It shortens the period of development dosage form as well as improves product quality. IVIVC reduce the experimental study on human because IVIVC involves the in vivo relevant media utilization in vitro specifications. The key goal of IVIVC is to serve as alternate for in vivo bioavailability studies and serve as justification for bio waivers. IVIVC follows the specifications and relevant quality control parameters that lead to improvement in pharmaceutical dosage form development in short period of time. Recently in-vivo in-vitro correlation (IVIVC) has found application to predict the pharmacokinetic behaviour of pharmaceutical preparations. It has emerged as a reliable tool to find the mode of absorption of several dosage forms. It is used to correlate the in-vitro dissolution with in vivo pharmacokinetic profile. IVIVC made use to predict the bioavailability of the drug of particular dosage form. IVIVC is satisfactory for the therapeutic release profile specifications of the formulation. IVIVC model has capability to predict plasma drug concentration from in vitro dissolution media.

Biopharmaceutical and Preclinical Studies of Zaleplon as Semisolid Dispersions with Self-emulsifying Lipid Surfactants for Oral Delivery

1970 ◽  
Vol 9 (1) ◽  
pp. 3102-3111
Author(s):  
Narendar Dudhipala ◽  
Arjun Narala ◽  
Dinesh Suram ◽  
Karthik Yadav Janga
Keyword(s):  
Oral Delivery ◽  
Molecular State ◽  
In Vivo Studies ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Phase Solubility ◽  
Microscopic Studies ◽  
Pure Drug

The objective of this present study is to develop a semisolid dispersion (SSD) of zaleplon with the aid of self-emulsifying lipid based amphiphilic carriers (TPGS E or Gelucire 44/14) addressing the poor solubility of this drug. A linear relationship between the solubility of drug with respect to increase in the concentration of lipid surfactant in aqueous medium resulting in AL type phase diagram was observed from phase solubility studies. Fusion method was employed to obtain semisolid dispersions (SSD) of zaleplon which showed high content uniformity of drug. The absence of chemical interactions between the pure drug, excipients and formulations were conferred by Fourier transmission infrared spectroscopic examinations. The photographic images from polarized optical microscopic studies revealed the change in crystalline form of drug to amorphous or molecular state. The superior dissolution parameters of zaleplon from SSD over pure crystalline drug interpreted from in vitro dissolution studies envisage the ability of these lipid surfactants as solubility enhancers. Further, the caliber of TPGS E or Gelucire 44/14 in encouraging the GI absorption of drug was evident with the higher human effective permeability coefficient and fraction oral dose of drug absorbed from SSD in situ intestinal permeation study. In conclusion, in vivo studies in Wister rats demonstrated an improvement in the oral bioavailability of zaleplon from SSD over control pure drug suspension suggesting the competence of Gelucire 44/14 and TPGS E as conscientious carriers to augment the dissolution rate limited bioavailability of this active

Formulation and Evaluation of Nanosuspension of Simvastatin

2015 ◽  
Vol 8 (2) ◽  
pp. 2858-2873
Author(s):  
Rupali L. Shid ◽  
Shashikant N. Dhole ◽  
Nilesh Kulkarni ◽  
Santosh L Shid
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Factorial Design ◽  
Dissolution Rate ◽  
In Vitro Dissolution ◽  
Total Drug ◽  
23 Factorial Design ◽  
Rate Of Dissolution

Poor water solubility and slow dissolution rate are issues for the majority of upcoming and existing biologically active compounds. Simvastatin is poorly water-soluble drug and its bioavailability is very low from its crystalline form. The purpose of this study wasto increase the solubility and dissolution rate of simvastatin by the  preparation of nanosuspension by emulsification solvent diffusion method at laboratory scale. Prepared nanosus-pension was evaluated for its particle size and in vitro dissolution study and characterized by zeta potential,differential scanning calorimetry (DSC) and X-Ray diffractometry (XRD), motic digital microscopy, entrapment efficiency, total drug content, saturated solubility study and in vivo study. A 23 factorial design was employed to study the effect of independent variables, amount of SLS (X1), amount of PVPK-30 (X2) and poloxamer-188 (X3) and dependent variables are total drug content and polydispersity Index. The obtained results showed that particle size (nm) and rate of dissolution has been improved when nanosuspension prepared with the higherconcentration of PVPK-30 with the higher concentration of PVP K-30 and Poloxamer-188 and lower concentration of SLS. The particle size and zeta potential of optimized formulation was found to be 258.3 nm and 23.43. The rate of dissolution of the optimized nanosuspension was enhanced (90% in 60min), relative to plain simvastatin  (21% in 60 min), mainly due to the formation of nanosized particles. These results indicate the suitability of 23 factorial  design for preparation of simvastatin loaded nano-suspension significantly improved in vitro dissolution rate and thus possibly enhance fast onset of therapeutic drug effect. In vivo study shows increase in bioavailability in nanosuspension formulation than the plain simvastatin drug.

scholarly journals Long-Acting Risperidone Dual Control System: Preparation, Characterization and Evaluation In Vitro and In Vivo

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1210
Author(s):  
Xieguo Yan ◽  
Shiqiang Wang ◽  
Kaoxiang Sun
Keyword(s):  
Drug Loading ◽  
Entrapment Efficiency ◽  
In Vitro Dissolution ◽  
Dissolution Behavior ◽  
In Vivo Evaluation ◽  
Long Term Treatment ◽  
Long Acting

Schizophrenia, a psychiatric disorder, requires long-term treatment; however, large fluctuations in blood drug concentration increase the risk of adverse reactions. We prepared a long-term risperidone (RIS) implantation system that can stabilize RIS release and established in-vitro and in-vivo evaluation systems. Cumulative release, drug loading, and entrapment efficiency were used as evaluation indicators to evaluate the effects of different pore formers, polymer ratios, porogen concentrations, and oil–water ratios on a RIS implant (RIS-IM). We also built a mathematical model to identify the optimized formulation by stepwise regression. We also assessed the crystalline changes, residual solvents, solubility and stability after sterilization, in-vivo polymer degradation, pharmacokinetics, and tissue inflammation in the case of the optimized formulation. The surface of the optimized RIS microspheres was small and hollow with 134.4 ± 3.5 µm particle size, 1.60 SPAN, 46.7% ± 2.3% implant drug loading, and 93.4% entrapment efficiency. The in-vitro dissolution behavior of RIS-IM had zero-order kinetics and stable blood concentration; no lag time was released for over three months. Furthermore, the RIS-IM was not only non-irritating to tissues but also had good biocompatibility and product stability. Long-acting RIS-IMs with microspheres and film coatings can provide a new avenue for treating schizophrenia.

scholarly journals In vitro and in vivo Evaluation of Ibuprofen Nanosuspensions for Enhanced Oral Bioavailability

2021 ◽  
Author(s):  
Mohsen Hedaya ◽  
Farzana Bandarkar ◽  
Aly Nada
Keyword(s):  
Particle Size ◽  
Tween 80 ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
In Vivo Evaluation ◽  
Poorly Soluble ◽  
Extent Of Absorption ◽  
Better Than

Introduction: The objectives were to prepare, characterize and in vivo evaluate different ibuprofen (IBU) nanosuspensions prepared by ultra-homogenization, after oral administration to rabbits. Methods: The nanosuspensions produced by ultra-homogenization were tested and compared with a marketed IBU suspension for particle size, in vitro dissolution and in vivo absorption. Five groups of rabbits received orally 25 mg/kg of IBU nanosuspension, nanoparticles, unhomogenized suspension, marketed product and untreated suspension. A sixth group received 5 mg/kg IBU intravenously. Serial blood samples were obtained after IBU administration. Results: The formulated nanosuspensions showed significant decrease in particle size. Polyvinyl Pyrrolidone K30 (PP) was found to improve IBU aqueous solubility much better than the other tested polymers. Addition of Tween 80 (TW), in equal amount as PP (IBU: PP:TW, 1:2:2 w/w) resulted in much smaller particle size and better dissolution rate. The Cmax achieved were 14.8±1.64, 11.1±1.37, 9.01±0.761, 7.03±1.38 and 3.23±1.03 μg/ml and the tmax were 36±8.2, 39±8.2, 100±17.3, 112±15 and 105±17 min for the nanosuspension, nanoparticle, unhomogenized suspension, marketed IBU suspension and untreated IBU suspension in water, respectively. Bioavailability of the different formulations relative to the marketed suspension were the highest for nanosuspension> unhomogenized suspension> nanoparticles> untreated IBU suspension. Conclusion: IBU/PP/TW nanosuspensions showed enhanced in vitro dissolution as well as faster rate and higher extent of absorption as indicated from the higher Cmax, shorter tmax and larger AUC. The in vivo data supported the in vitro results. Nanosuspensions prepared by ultra-high-pressure-homogenization technique can be used as a good formulation strategy to enhance the rate and extent of absorption of poorly soluble drugs.

scholarly journals An In Vivo Predictive Dissolution Methodology (iPD Methodology) with a BCS Class IIb Drug Can Predict the In Vivo Bioequivalence Results: Etoricoxib Products

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 507
Author(s):  
Isabel Gonzalez-Alvarez ◽  
Marival Bermejo ◽  
Yasuhiro Tsume ◽  
Alejandro Ruiz-Picazo ◽  
Marta Gonzalez-Alvarez ◽  
...  
Keyword(s):  
Plasma Concentrations ◽  
In Vitro Dissolution ◽  
Case Examples ◽  
Dissolution Studies ◽  
Weak Bases ◽  
Transit Times ◽  
Class Iib ◽  
The Impact

The purpose of this study was to predict in vivo performance of three oral products of Etoricoxib (Arcoxia® as reference and two generic formulations in development) by conducting in vivo predictive dissolution with GIS (Gastro Intestinal Simulator) and computational analysis. Those predictions were compared with the results from previous bioequivalence (BE) human studies. Product dissolution studies were performed using a computer-controlled multicompartmental dissolution device (GIS) equipped with three dissolution chambers, representing stomach, duodenum, and jejunum, with integrated transit times and secretion rates. The measured dissolved amounts were modelled in each compartment with a set of differential equations representing transit, dissolution, and precipitation processes. The observed drug concentration by in vitro dissolution studies were directly convoluted with permeability and disposition parameters from literature to generate the predicted plasma concentrations. The GIS was able to detect the dissolution differences among reference and generic formulations in the gastric chamber where the drug solubility is high (pH 2) while the USP 2 standard dissolution test at pH 2 did not show any difference. Therefore, the current study confirms the importance of multicompartmental dissolution testing for weak bases as observed for other case examples but also the impact of excipients on duodenal and jejunal in vivo behavior.

Sign in / Sign up

Export Citation Format

Share Document