scholarly journals Multivariate Correlation Analysis of the Electroconductive Textiles Obtained Using Functionalization by Radio-Frequency Oxygen Plasma Treatments

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5609
Author(s):  
Raluca Maria Aileni ◽  
Laura Chiriac ◽  
Doina Toma ◽  
Irina Sandulache
Keyword(s):  
Thin Film ◽  
Correlation Analysis ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Rf Plasma ◽  
Multivariate Correlation ◽  
Hydrophilic Character ◽  
Fabric Surface ◽  
O2 Plasma ◽  
Multivariate Correlation Analysis

This paper presents a study concerning the preliminary treatments in radiofrequency (RF)oxygen (O2) plasma used to obtain a hydrophilic effect on raw cotton fabrics followed by electroconductive thin film deposition to obtain electroconductive textile surfaces. In addition, this study presents a multivariate correlation analysis of experimental parameters. The treatment using RF plasma O2 aimed to increase the hydrophilic character of the raw fabric and adherence of paste-based polymeric on polyvinyl alcohol (PVA) matrix and nickel (Ni), silver (Ag) or copper (Cu) microparticles. The purpose of the research was to develop electroconductive textiles for flexible electrodes, smart materials using a clean technology such as radiofrequency (RF) plasma O2 to obtain a hydrophilic surface with zero wastewater and reduced chemicals and carbon footprint. To achieve the foreseen results, we used advanced functionalization technologies such as RF plasma O2, followed by scraping a thin film of conductive paste-based Ni, Ag or Cu microparticles, and multivariate correlation methods to observe the dependence between parameters involved (dependent and independent variables). Overall, the fabrics treated in plasma with O2 using a kHz or MHz generator and power 100–200 W present an excellent hydrophilic character obtained in 3 min. After RF O2 plasma functionalization, a thin film based on polymeric matrix PVA and Ni microparticles have been deposited on the fabric surface to obtain electroconductive materials.

Observations on the growth of YBa2Cu3O7-δ thin films on MgO by pulsed-laser ablation

1991 ◽  
Vol 49 ◽  
pp. 1068-1069
Author(s):  
M. Grant Norton ◽  
C. Barry Carter
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Laser Ablation ◽  
Substrate Surface ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Laser Ablation Process ◽  
Deposition Parameters

Pulsed-laser ablation has been widely used to produce high-quality thin films of YBa2Cu3O7-δ on a range of substrate materials. The nonequilibrium nature of the process allows congruent deposition of oxides with complex stoichiometrics. In the high power density regime produced by the UV excimer lasers the ablated species includes a mixture of neutral atoms, molecules and ions. All these species play an important role in thin-film deposition. However, changes in the deposition parameters have been shown to affect the microstructure of thin YBa2Cu3O7-δ films. The formation of metastable configurations is possible because at the low substrate temperatures used, only shortrange rearrangement on the substrate surface can occur. The parameters associated directly with the laser ablation process, those determining the nature of the process, e g. thermal or nonthermal volatilization, have been classified as ‘primary parameters'. Other parameters may also affect the microstructure of the thin film. In this paper, the effects of these ‘secondary parameters' on the microstructure of YBa2Cu3O7-δ films will be discussed. Examples of 'secondary parameters' include the substrate temperature and the oxygen partial pressure during deposition.

Characterization of Y-Ba-Cu-O films grown on silicon substrates by sequential evaporation

1988 ◽  
Vol 46 ◽  
pp. 866-867
Author(s):  
E. L. Hall ◽  
A. Mogro-Campero ◽  
L. G. Turner ◽  
N. Lewis
Keyword(s):  
Thin Film ◽  
Thin Film Deposition ◽  
Superconducting Films ◽  
Electron Beam Evaporation ◽  
Film Deposition ◽  
Silicon Substrates ◽  
Superconducting Properties ◽  
Sequential Electron ◽  
Thin Superconducting Films

There is great interest in the growth of thin superconducting films of YBa2Cu3Ox on silicon, since this is a necessary first step in the use of this superconductor in a variety of possible electronic applications including interconnects and hybrid semiconductor/superconductor devices. However, initial experiments in this area showed that drastic interdiffusion of Si into the superconductor occurred during annealing if the Y-Ba-Cu-O was deposited direcdy on Si or SiO2, and this interdiffusion destroyed the superconducting properties. This paper describes the results of the use of a zirconia buffer layer as a diffusion barrier in the growth of thin YBa2Cu3Ox films on Si. A more complete description of the growth and characterization of these films will be published elsewhere.Thin film deposition was carried out by sequential electron beam evaporation in vacuum onto clean or oxidized single crystal Si wafers. The first layer evaporated was 0.4 μm of zirconia.

CVD copper thin film deposition using (α-methylstyrene)Cu(I)(hfac)

2001 ◽  
Vol 11 (PR3) ◽  
pp. Pr3-553-Pr3-560 ◽  
Author(s):  
W. Zhuang ◽  
L. J. Charneski ◽  
D. R. Evans ◽  
S. T. Hsu ◽  
Z. Tang ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Copper Thin Film

Organic Electronics

2020 ◽  
Author(s):  
Stephen R. Forrest
Keyword(s):  
Thin Film ◽  
Organic Electronics ◽  
Thin Film Transistors ◽  
High Performance ◽  
Electronic Devices ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Organic Thin Film ◽  
Graduate Studies ◽  
Organic Light

Organic electronics is a platform for very low cost and high performance optoelectronic and electronic devices that cover large areas, are lightweight, and can be both flexible and conformable to irregularly shaped surfaces such as foldable smart phones. Organics are at the core of the global organic light emitting device (OLED) display industry, and also having use in efficient lighting sources, solar cells, and thin film transistors useful in medical and a range of other sensing, memory and logic applications. This book introduces the theoretical foundations and practical realization of devices in organic electronics. It is a product of both one and two semester courses that have been taught over a period of more than two decades. The target audiences are students at all levels of graduate studies, highly motivated senior undergraduates, and practicing engineers and scientists. The book is divided into two sections. Part I, Foundations, lays down the fundamental principles of the field of organic electronics. It is assumed that the reader has an elementary knowledge of quantum mechanics, and electricity and magnetism. Background knowledge of organic chemistry is not required. Part II, Applications, focuses on organic electronic devices. It begins with a discussion of organic thin film deposition and patterning, followed by chapters on organic light emitters, detectors, and thin film transistors. The last chapter describes several devices and phenomena that are not covered in the previous chapters, since they lie outside of the current mainstream of the field, but are nevertheless important.

Two-dimensional BN-doped ZnO thin-film deposition by a thermionic vacuum arc system

2020 ◽  
Vol 31 (9) ◽  
pp. 6948-6955
Author(s):  
Mustafa Özgür ◽  
Suat Pat ◽  
Reza Mohammadigharehbagh ◽  
Uğur Demirkol ◽  
Nihan Akkurt ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Vacuum Arc ◽  
Zno Thin Film ◽  
Two Dimensional ◽  
Doped Zno ◽  
Thermionic Vacuum Arc

Surface conditioning of fusion devices plasma assisted thin film deposition

1990 ◽  
Author(s):  
J. Winter ◽  
F. Waelbroeck ◽  
P. Weinhold ◽  
H. G. Esser ◽  
J. von Seggern ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Surface Conditioning

scholarly journals Nanoimprinted multifunctional nanoprobes for a homogeneous immunoassay in a top-down fabrication approach

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Hubert Brueckl ◽  
Astrit Shoshi ◽  
Stefan Schrittwieser ◽  
Barbara Schmid ◽  
Pia Schneeweiss ◽  
...  
Keyword(s):  
Thin Film ◽  
Nanoimprint Lithography ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
In Vitro Diagnostics ◽  
Top Down ◽  
Highly Sensitive ◽  
Optical And Magnetic Properties ◽  
Lift Off

AbstractMultifunctional nanoparticles are discussed as versatile probes for homogeneous immunoassays for in-vitro diagnostics. Top-down fabrication allows to combine and tailor magnetic and plasmonic anisotropic properties. The combination of nanoimprint lithography, thin film deposition, and lift-off processing provides a top-down fabrication platform, which is both flexible and reliable. Here, we discuss the material compositions and geometrical designs of monodisperse multicomponent nanoparticles and their consequences on optical and magnetic properties. The rotational hydrodynamics of nanoparticles is measured and considered under the influence of magnetic shape anisotropy in the framework of the Stoner-Wohlfarth theory. The plasmon-optical properties are explained by discrete-dipole finite-element simulations. Rotational dynamical measurements of imprinted nanoprobes for two test proteins demonstrate the applicability as highly sensitive biomolecular nanoprobes.

Sign in / Sign up

Export Citation Format

Share Document