scholarly journals Diffusion Dynamics and Impact of Noise on a Discrete-Time Ratio-Dependent Model: An Analytical and Numerical Approach

2019 ◽  
Vol 24 (4) ◽  
pp. 103 ◽  
Author(s):  
Kalyan Das ◽  
M. N. Srinivas ◽  
Nurul Huda Gazi
Keyword(s):  
Numerical Simulation ◽  
Lyapunov Exponent ◽  
Discrete Time ◽  
Discrete System ◽  
Initial Conditions ◽  
Dynamical Behavior ◽  
Basin Of Attraction ◽  
Time Ratio ◽  
Diffusion Dynamics ◽  
Ratio Dependent

The paper deals with the dynamical behavior of a discrete-time ratio-dependent predator–prey system. The predator dependence is one of the main concerns of the system. The stability analysis of this 2-dimensional map was carried out analytically. Numerical simulation was carried out to verify the analytical results. We analyzed some specific features that could arise in discrete system. Basin of attraction was found for the endemic equilibrium state. We extended the numerical simulation for the maximal Lyapunov exponent. The presence of positive Lyapunov exponent indicated chaotic behavior of the map. The sensitive dependence on initial condition is one of the criteria for a discrete system. We showed that the system is sensitive on the initial conditions. We also carried out the analysis of diffusion and impact of noise.

On the modeling of some triodes-based nonlinear oscillators with complex dynamics: case of the Van der Pol oscillator

2021 ◽  
Author(s):  
Joakim Vianney Ngamsa Tegnitsap ◽  
Merlin Brice Saatsa Tsefack ◽  
Elie Bertrand Megam Ngouonkadi ◽  
Hilaire Bertrand Fotsin
Keyword(s):  
Mathematical Model ◽  
Lyapunov Exponent ◽  
Dynamical Behavior ◽  
Basin Of Attraction ◽  
Period Doubling ◽  
Nonlinear Oscillators ◽  
Van Der Pol Oscillator ◽  
Phase Portraits ◽  
Van Der Pol ◽  
Physical Consideration

Abstract In this work, the dynamic of the triode-based Van der Pol oscillator coupled to a linear circuit is investigated (Triode-based VDPCL oscillator). Towards this end, we present a mathematical model of the triode, chosen from among the many different ones present in literature. The dynamical behavior of the system is investigated using classical tools such as two-parameter Lyapunov exponent, one-parameter bifurcation diagram associated with the graph of largest Lyapunov exponent, phase portraits, and time series. Numerical simulations reveal rather rich and complex phenomena including chaos, transient chaos, the coexistence of solutions, crisis, period-doubling followed by reverse period-doubling sequences (bubbles), and bursting oscillation. The coexistence of attractors is illustrated by the phase portraits and the cross-section of the basin of attraction. Such triode-based nonlinear oscillators can find their applications in many areas where ultra-high frequencies and high powers are demanded (radio, radar detection, satellites communication, etc.) since triode can work with these performances and are often used in the aforementioned areas. In contrast to some recent work on triode-based oscillators, LTSPICE simulations, based on real physical consideration of the triode, are carried out in order to validate the theoretical results obtained in this paper as well as the mathematical model adopted for the triode.

scholarly journals The VIT Transform Approach to Discrete-Time Signals and Linear Time-Varying Systems

Eng ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 99-125
Author(s):  
Edward W. Kamen
Keyword(s):  
Discrete Time ◽  
Initial Conditions ◽  
Linear Time ◽  
Order Term ◽  
Initial Time ◽  
Time Varying ◽  
Varying Coefficients ◽  
Time Signals ◽  
Time Varying Systems ◽  
Time Varying Coefficients

A transform approach based on a variable initial time (VIT) formulation is developed for discrete-time signals and linear time-varying discrete-time systems or digital filters. The VIT transform is a formal power series in z−1, which converts functions given by linear time-varying difference equations into left polynomial fractions with variable coefficients, and with initial conditions incorporated into the framework. It is shown that the transform satisfies a number of properties that are analogous to those of the ordinary z-transform, and that it is possible to do scaling of z−i by time functions, which results in left-fraction forms for the transform of a large class of functions including sinusoids with general time-varying amplitudes and frequencies. Using the extended right Euclidean algorithm in a skew polynomial ring with time-varying coefficients, it is shown that a sum of left polynomial fractions can be written as a single fraction, which results in linear time-varying recursions for the inverse transform of the combined fraction. The extraction of a first-order term from a given polynomial fraction is carried out in terms of the evaluation of zi at time functions. In the application to linear time-varying systems, it is proved that the VIT transform of the system output is equal to the product of the VIT transform of the input and the VIT transform of the unit-pulse response function. For systems given by a time-varying moving average or an autoregressive model, the transform framework is used to determine the steady-state output response resulting from various signal inputs such as the step and cosine functions.

Numerical Simulation on Temperature Field in Multi-Layers Inside-Beam Powder Feeding when Laser Cladding

2012 ◽  
Vol 499 ◽  
pp. 114-119 ◽  
Author(s):  
Ming Di Wang ◽  
Shi Hong Shi ◽  
X.B. Liu ◽  
Cheng Fa Song ◽  
Li Ning Sun
Keyword(s):  
Numerical Simulation ◽  
Heat Source ◽  
Laser Beam ◽  
Cooling Rate ◽  
Light Source ◽  
Laser Cladding ◽  
Laser Scanning ◽  
Initial Conditions ◽  
Cladding Layer ◽  
Powder Feeding

Numerical simulation of laser cladding is the main research topics for many universities and academes, but all researchers used the Gaussian laser light source. Due to using inside-beam powder feeding for laser cladding, the laser is dispersed by the cone-shaped mirror, and then be focused by the annular mirror, the laser can be assumed as the light source of uniform intensity.In this paper,the temperature of powder during landing selected as the initial conditions, and adopting the life-and-death unit method, the moving point heat source and the uniform heat source are realized. In the thickness direction, using the small melt layer stacking method, a finite element model has been established, and layer unit is acted layer by layer, then a virtual reality laser cladding manu-facturing process is simulated. Calculated results show that the surface temperature of the cladding layer depends on the laser scanning speed, powder feed rate, defocus distance. As cladding layers increases, due to the heat conduction into the base too late, bath temperature will gradually increase. The highest temperature is not at the laser beam, but at the later point of the laser beam. In the clad-ding process, the temperature cooling rate of the cladding layer in high temperature section is great, and in the low-temperature, cooling rate is relatively small. These conclusions are also similar with the normal laser cladding. Finally, some experiments validate the simulation results. The trends of simulating temperature are fit to the actual temperature, and the temperature gradient can also ex-plain the actual shape of cross-section.

Behavior of a Self-Sustained Electromechanical Transducer and Routes to Chaos

2005 ◽  
Vol 128 (3) ◽  
pp. 282-293 ◽  
Author(s):  
J. C. Chedjou ◽  
K. Kyamakya ◽  
I. Moussa ◽  
H.-P. Kuchenbecker ◽  
W. Mathis
Keyword(s):  
Electronic Circuit ◽  
Initial Conditions ◽  
Dynamical Behavior ◽  
Period Doubling ◽  
Electromechanical System ◽  
Phase Portraits ◽  
Coupling Coefficients ◽  
Oscillatory Solutions ◽  
Electromechanical Transducer ◽  
Design Engineers

This paper studies the dynamics of a self-sustained electromechanical transducer. The stability of fixed points in the linear response is examined. Their local bifurcations are investigated and different types of bifurcation likely to occur are found. Conditions for the occurrence of Hopf bifurcations are derived. Harmonic oscillatory solutions are obtained in both nonresonant and resonant cases. Their stability is analyzed in the resonant case. Various bifurcation diagrams associated to the largest one-dimensional (1-D) numerical Lyapunov exponent are obtained, and it is found that chaos can appear suddenly, through period doubling, period adding, or torus breakdown. The extreme sensitivity of the electromechanical system to both initial conditions and tiny variations of the coupling coefficients is also outlined. The experimental study of̱the electromechanical system is carried out. An appropriate electronic circuit (analog simulator) is proposed for the investigation of the dynamical behavior of the electromechanical system. Correspondences are established between the coefficients of the electromechanical system model and the components of the electronic circuit. Harmonic oscillatory solutions and phase portraits are obtained experimentally. One of the most important contributions of this work is to provide a set of reliable analytical expressions (formulas) describing the electromechanical system behavior. These formulas are of great importance for design engineers as they can be used to predict the states of the electromechanical systems and respectively to avoid their destruction. The reliability of the analytical formulas is demonstrated by the very good agreement with the results obtained by both the numeric and the experimental analysis.

Nonlinear Dynamics and Application of the Four Dimensional Autonomous Hyper-Chaotic System

2014 ◽  
Author(s):  
Ge Kai ◽  
Wei Zhang
Keyword(s):  
Nonlinear Dynamics ◽  
Numerical Simulation ◽  
Differential Equations ◽  
Chaotic System ◽  
Dynamical Behavior ◽  
Three Dimensional ◽  
Phase Portraits ◽  
State Variables ◽  
Chaotic Motions ◽  
Finance System

In this paper, we establish a dynamic model of the hyper-chaotic finance system which is composed of four sub-blocks: production, money, stock and labor force. We use four first-order differential equations to describe the time variations of four state variables which are the interest rate, the investment demand, the price exponent and the average profit margin. The hyper-chaotic finance system has simplified the system of four dimensional autonomous differential equations. According to four dimensional differential equations, numerical simulations are carried out to find the nonlinear dynamics characteristic of the system. From numerical simulation, we obtain the three dimensional phase portraits that show the nonlinear response of the hyper-chaotic finance system. From the results of numerical simulation, it is found that there exist periodic motions and chaotic motions under specific conditions. In addition, it is observed that the parameter of the saving has significant influence on the nonlinear dynamical behavior of the four dimensional autonomous hyper-chaotic system.

Sign in / Sign up

Export Citation Format

Share Document