scholarly journals Secondary Recrystallization Behavior in Fe-3%Si Grain-oriented Silicon Steel Produced by Twin-roll Casting and Simplified Secondary Annealing

Metals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 660
Author(s):  
Yang Wang ◽  
Yuanxiang Zhang ◽  
Feng Fang ◽  
Xiang Lu ◽  
Guo Yuan ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Secondary Recrystallization ◽  
Laser Scanning Microscopy ◽  
Processing Route ◽  
Confocal Laser ◽  
Continuous Annealing ◽  
Pinning Force ◽  
Recrystallization Behavior ◽  
Twin Roll ◽  
Secondary Annealing

Grain-oriented silicon steels were produced by the shortest processing route involving twin-roll strip casting, two-stage cold rolling with intermediate annealing, and simulated continuous annealing. The secondary recrystallization behavior of grain-oriented silicon steels under different inhibition conditions was in-situ observed by combining the confocal laser scanning microscopy (CLSM) and electron backscattered diffraction (EBSD) techniques. The results revealed that the optimal temperature of secondary recrystallization showed a proportional relationship with the Zenner pinning force. In the case of weak pinning force, the abnormal grain growth occurred quickly at ~1050 °C. The corresponding growth rates were in the range of 60–1400 μm/min and decreased gradually as the secondary recrystallization proceeded. In the case of strong pinning force, the incubation time and onset temperature of the secondary recrystallization was significantly increased, but the total time of the secondary recrystallization was obviously shortened from 685 s to 479 s, and the final magnetic induction of B8 was increased from 1.7 T to 1.85 T. After the secondary annealing, some island grains and coarse primary grains were retained. The formation of island grain was related to the low migration of grain boundaries. The findings of coarse γ- grains indicated that the primary grain size also played a crucial role during secondary recrystallization, apart from the primary recrystallized texture, which attracted more attention previously.

3-D imaging of cells using a confocal laser scanning microscope and digital image processing

1988 ◽  
Vol 46 ◽  
pp. 96-97
Author(s):  
Thomas M. Jovin ◽  
Michel Robert-Nicoud ◽  
Donna J. Arndt-Jovin ◽  
Thorsten Schormann
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Scanning Microscope ◽  
Laser Scanning Microscope ◽  
Biochemical Processes ◽  
Adjacent Structures

Light microscopic techniques for visualizing biomolecules and biochemical processes in situ have become indispensable in studies concerning the structural organization of supramolecular assemblies in cells and of processes during the cell cycle, transformation, differentiation, and development. Confocal laser scanning microscopy offers a number of advantages for the in situ localization and quantitation of fluorescence labeled targets and probes: (i) rejection of interfering signals emanating from out-of-focus and adjacent structures, allowing the “optical sectioning” of the specimen and 3-D reconstruction without time consuming deconvolution; (ii) increased spatial resolution; (iii) electronic control of contrast and magnification; (iv) simultanous imaging of the specimen by optical phenomena based on incident, scattered, emitted, and transmitted light; and (v) simultanous use of different fluorescent probes and types of detectors.We currently use a confocal laser scanning microscope CLSM (Zeiss, Oberkochen) equipped with 3-laser excitation (u.v - visible) and confocal optics in the fluorescence mode, as well as a computer-controlled X-Y-Z scanning stage with 0.1 μ resolution.

Vacuoles Induced in Mammalian Cells by Helicobacter Cytotoxin are Acidic Organelles

1990 ◽  
Vol 48 (3) ◽  
pp. 168-169
Author(s):  
M. H. Chestnut ◽  
C. E. Catrenich
Keyword(s):  
Acridine Orange ◽  
Mammalian Cells ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Ulcer Disease ◽  
Gastroduodenal Disease ◽  
H Pylori

Helicobacter pylori is a non-invasive, Gram-negative spiral bacterium first identified in 1983, and subsequently implicated in the pathogenesis of gastroduodenal disease including gastritis and peptic ulcer disease. Cytotoxic activity, manifested by intracytoplasmic vacuolation of mammalian cells in vitro, was identified in 55% of H. pylori strains examined. The vacuoles increase in number and size during extended incubation, resulting in vacuolar and cellular degeneration after 24 h to 48 h. Vacuolation of gastric epithelial cells is also observed in vivo during infection by H. pylori. A high molecular weight, heat labile protein is believed to be responsible for vacuolation and to significantly contribute to the development of gastroduodenal disease in humans. The mechanism by which the cytotoxin exerts its effect is unknown, as is the intracellular origin of the vacuolar membrane and contents. Acridine orange is a membrane-permeant weak base that initially accumulates in low-pH compartments. We have used acridine orange accumulation in conjunction with confocal laser scanning microscopy of toxin-treated cells to begin probing the nature and origin of these vacuoles.

Use of confocal laser scanning microscopy and a computer model to understand ink cavitation and filamentation

TAPPI Journal ◽  
2010 ◽  
Vol 9 (10) ◽  
pp. 7-15
Author(s):  
HANNA KOIVULA ◽  
DOUGLAS BOUSFIELD ◽  
MARTTI TOIVAKKA
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Print Quality ◽  
Length Scale ◽  
Offset Printing ◽  
Significant Difference ◽  
Printing Speed

In the offset printing process, ink film splitting has an important impact on formation of ink filaments. The filament size and its distribution influence the leveling of ink and hence affect ink setting and the print quality. However, ink filaments are difficult to image due to their short lifetime and fine length scale. Due to this difficulty, limited work has been reported on the parameters that influence filament size and methods to characterize it. We imaged ink filament remains and quantified some of their characteristics by changing printing speed, ink amount, and fountain solution type. Printed samples were prepared using a laboratory printability tester with varying ink levels and operating settings. Rhodamine B dye was incorporated into fountain solutions to aid in the detection of the filaments. The prints were then imaged with a confocal laser scanning microscope (CLSM) and images were further analyzed for their surface topography. Modeling of the pressure pulses in the printing nip was included to better understand the mechanism of filament formation and the origin of filament length scale. Printing speed and ink amount changed the size distribution of the observed filament remains. There was no significant difference between fountain solutions with or without isopropyl alcohol on the observed patterns of the filament remains.

ACTIVATED SLUDGE FLOC CHARACTERIZATION BY CONFOCAL LASER SCANNING MICROSCOPY

2012 ◽  
Vol 11 (3) ◽  
pp. 669-674 ◽  
Author(s):  
Szabolcs Szilveszter ◽  
Botond Raduly ◽  
Szilard Bucs ◽  
Beata Abraham ◽  
Szabolcs Lanyi ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Confocal Laser Scanning Microscopy ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Scanning Microscopy ◽  
Confocal Laser

Cuticular structures in the copulatory apparatus of Planorbis planorbis (Linnaeus, 1758) (Gastropoda: Pulmonata: Planorbidae)

2009 ◽  
Vol 18 (1) ◽  
pp. 11-16
Author(s):  
E.V. Soldatenko ◽  
A.A. Petrov
Keyword(s):  
Light Microscopy ◽  
Confocal Laser Scanning Microscopy ◽  
Laser Scanning ◽  
Taxonomic Status ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Copulatory Apparatus ◽  
The Family ◽  
Cuticular Structures

The morphology of the copulatory apparatus and associated cuticular structures in Planorbis planorbis was studied by light microscopy, SEM, TEM and confocal laser scanning microscopy. The significance of these cuticular structures for the taxonomic status of the species and for the systematics of the family Planorbidae in general is discussed.

Berberine Chloride Dihydrate Enthused Nanovesicles for the Management of Dermatitis

2020 ◽  
Vol 10 ◽  
Author(s):  
Nimisha Srivastava ◽  
Zeeshan Fatima ◽  
Chanchal Deep Kaur ◽  
Dilshad Ali Rizvi
Keyword(s):  
Laser Scanning ◽  
Skin Irritation ◽  
Research Work ◽  
Slight Modification ◽  
Entrapment Efficiency ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Chloride Dihydrate ◽  
E Coli ◽  
Berberine Chloride

Background: Dermatitis is a common inflammatory skin disease that is affecting up to 25% of children and 1%-3% of adults worldwide. Paucity of exact cure for dermatitis and untoward side effects of topical immunosuppressive steroids has resulted into a great need for making use of complementary medicine to treat dermatitis. Objective: The present research work involved the development of Berberine chloride dihydrate (BCD) enthused nanovesicles i.e. ethosomes for the management of dermatitis. Method: Ethosomes were prepared by slight modification of cold method using varying concentrations of SPC (1-3%) and ethanol (10-40%) Optimized batch BCD 12 was further added to Carbopol 934P for gel formation. GEL BCD 12 was subjected to “anti-bacterial, dermatitis and skin irritation study. Result: The vesicles were in size range 142.42-398.31 nm while polydispersity index (PDI) ranges from 0.114-1.56 and for zeta potential it was from-18.8 to -39.4. Entrapment efficiency was from 46.05-88.79 %. Confocal laser scanning microscopy showed penetration depth of rhodamine enthused ethosome across rat skin upto 110 µm which was significantly higher than rhodamine solution (10 µm). In the anti-bacterial study, BCD loaded ethosomal gel (EG) showed maximum zone of inhibition of 18.5 mm against E. coli, 14.5 mm against P. aeruginosa and 23.0 mm against S. aureus. In dinitrochlorobenzene (DNCB) induced mice dermatitis model histopathology study showed marked decrease in amount of inflammatory cell nucleus in mice treated with BCD loaded ethosomal gel followed by 56% and 50 % increase in ear swelling and ear mass respectively in morphology study. Conventional marketed formulation showed nominal decrease in epidermal thickness, 66.67 % increase in ear thickness and 63.64 % increase in ear mass. Further Primary irritation index was less than 0.4 indicating negligible irritation in all the groups. Conclusion: It can be concluded that ethosomal gel is not only an efficient carrier for BCD but also proves its potential for the management of dermatitis.

Sign in / Sign up

Export Citation Format

Share Document