scholarly journals A Brief Review on Additive Manufacturing of Polymeric Composites and Nanocomposites

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 704
Author(s):  
Vahid Monfared ◽  
Hamid Reza Bakhsheshi-Rad ◽  
Seeram Ramakrishna ◽  
Mahmood Razzaghi ◽  
Filippo Berto
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
High Speed ◽  
Numerical Models ◽  
Polymeric Matrix ◽  
Polymer Materials ◽  
Matrix Composites ◽  
Fused Deposition ◽  
Polymeric Matrix Composites

In this research article, a mini-review study is performed on the additive manufacturing (AM) of the polymeric matrix composites (PMCs) and nanocomposites. In this regard, some methods for manufacturing and important and applied results are briefly introduced and presented. AM of polymeric matrix composites and nanocomposites has attracted great attention and is emerging as it can make extensively customized parts with appreciably modified and improved mechanical properties compared to the unreinforced polymer materials. However, some matters must be addressed containing reduced bonding of reinforcement and matrix, the slip between reinforcement and matrix, lower creep strength, void configurations, high-speed crack propagation, obstruction because of filler inclusion, enhanced curing time, simulation and modeling, and the cost of manufacturing. In this review, some selected and significant results regarding AM or three-dimensional (3D) printing of polymeric matrix composites and nanocomposites are summarized and discuss. In addition, this article discusses the difficulties in preparing composite feedstock filaments and printing issues with nanocomposites and short and continuous fiber composites. It is discussed how to print various thermoplastic composites ranging from amorphous to crystalline polymers. In addition, the analytical and numerical models used for simulating AM, including the Fused deposition modeling (FDM) printing process and estimating the mechanical properties of printed parts, are explained in detail. Particle, fiber, and nanomaterial-reinforced polymer composites are highlighted for their performance. Finally, key limitations are identified in order to stimulate further 3D printing research in the future.

scholarly journals Investigation of a Short Carbon Fibre-Reinforced Polyamide and Comparison of Two Manufacturing Processes: Fused Deposition Modelling (FDM) and Polymer Injection Moulding (PIM)

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 672 ◽  
Author(s):  
Elena Verdejo de Toro ◽  
Juana Coello Sobrino ◽  
Alberto Martínez Martínez ◽  
Valentín Miguel Eguía ◽  
Jorge Ayllón Pérez
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Injection Moulding ◽  
New Technologies ◽  
Mechanical Response ◽  
Fused Deposition Modelling ◽  
Layer By Layer ◽  
Polymer Injection ◽  
Fused Deposition

New technologies are offering progressively more effective alternatives to traditional ones. Additive Manufacturing (AM) is gaining importance in fields related to design, manufacturing, engineering and medicine, especially in applications which require complex geometries. Fused Deposition Modelling (FDM) is framed within AM as a technology in which, due to their layer-by-layer deposition, thermoplastic polymers are used for manufacturing parts with a high degree of accuracy and minimum material waste during the process. The traditional technology corresponding to FDM is Polymer Injection Moulding, in which polymeric pellets are injected by pressure into a mould using the required geometry. The increasing use of PA6 in Additive Manufacturing makes it necessary to study the possibility of replacing certain parts manufactured by injection moulding with those created using FDM. In this work, PA6 was selected due to its higher mechanical properties in comparison with PA12. Moreover, its higher melting point has been a limitation for 3D printing technology, and a further study of composites made of PA6 using 3D printing processes is needed. Nevertheless, analysis of the mechanical response of standardised samples and the influence of the manufacturing process on the polyamide’s mechanical properties needs to be carried out. In this work, a comparative study between the two processes was conducted, and conclusions were drawn from an engineering perspective.

Design, Development and Characterization of Linear, Soft Actuators via Additive Manufacturing

2018 ◽  
Author(s):  
Alfonso Costas ◽  
Daniel E. Davis ◽  
Yixian Niu ◽  
Sadegh Dabiri ◽  
Jose Garcia ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Single Step ◽  
Design Development ◽  
Initial Attempt ◽  
Fused Deposition ◽  
Piston Cylinder ◽  
Compact Size ◽  
Soft Actuators

Additive manufacturing has emerged as an alternative to traditional manufacturing technologies. In particular, industries like fluid power, aviation and robotics have the potential to benefit greatly from this technology, due to the design flexibility, weight reduction and compact size that can be achieved. In this work, the design process and advantages of using 3D printing to make soft linear actuators were studied and highlighted. This work explored the limitations of current additive manufacturing tolerances to fabricate a typical piston-cylinder assembly, and how enclosed bellow actuators could be used to overcome high leakage and friction issues experienced with a piston-cylinder type actuator. To do that, different 3D printing technologies were studied and evaluated (stereolithorgraphy and fused deposition modeling) in the pursuit of high-fidelity, cost-effective 3D printing. The initial attempt consisted of printing the soft actuators directly using flexible materials in a stereolithography-type 3D printer. However, these actuators showed low durability and poor performance. The lack of a reliable resin resulted in the replacement of this material by EcoFlex® 00-30 silicone and the use of a 3D printed mold to cast the actuators. These molds included a 3-D printed dissolvable core inside the cast actuator in order to finish the manufacturing process in one single step. An experimental setup to evaluate the capabilities of these actuators was developed. Results are shown to assess the steady-state and the dynamic characteristics of these actuators. These tests resulted into the stroke-pressure and stroke-time responses for a specific load given different proportional valve inputs.

scholarly journals Effect of Porosity on Mechanical Properties of 3D Printed Polymers: Experiments and Micromechanical Modeling Based on X-Ray Computed Tomography Analysis

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1154 ◽  
Author(s):  
Wang ◽  
Zhao ◽  
Fuh ◽  
Lee
Keyword(s):  
Computed Tomography ◽  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Micromechanical Model ◽  
Micromechanical Modeling ◽  
X Ray ◽  
Fused Deposition ◽  
3D Printed ◽  
X Ray Computed

Additive manufacturing (commonly known as 3D printing) is defined as a family of technologies that deposit and consolidate materials to create a 3D object as opposed to subtractive manufacturing methodologies. Fused deposition modeling (FDM), one of the most popular additive manufacturing techniques, has demonstrated extensive applications in various industries such as medical prosthetics, automotive, and aeronautics. As a thermal process, FDM may introduce internal voids and pores into the fabricated thermoplastics, giving rise to potential reduction on the mechanical properties. This paper aims to investigate the effects of the microscopic pores on the mechanical properties of material fabricated by the FDM process via experiments and micromechanical modeling. More specifically, the three-dimensional microscopic details of the internal pores, such as size, shape, density, and spatial location were quantitatively characterized by X-ray computed tomography (XCT) and, subsequently, experiments were conducted to characterize the mechanical properties of the material. Based on the microscopic details of the pores characterized by XCT, a micromechanical model was proposed to predict the mechanical properties of the material as a function of the porosity (ratio of total volume of the pores over total volume of the material). The prediction results of the mechanical properties were found to be in agreement with the experimental data as well as the existing works. The proposed micromechanical model allows the future designers to predict the elastic properties of the 3D printed material based on the porosity from XCT results. This provides a possibility of saving the experimental cost on destructive testing.

scholarly journals EFFECT OF EXTRUSION PROCESS PARAMETERS ON MECHANICAL PROPERTIES OF 3D PRINTED PLA PRODUCT

2021 ◽  
Vol 6 (2) ◽  
pp. 119
Author(s):  
Nanang Ali Sutisna ◽  
Rakha Amrillah Fattah
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Extrusion Process ◽  
Experimental Procedure ◽  
Fused Deposition ◽  
Novel Approach ◽  
Deposition Modeling ◽  
3D Printed ◽  
3D Digital Models

The method of producing items through synchronously depositing material level by level, based on 3D digital models, is named Additive Manufacturing (AM) or 3D-printing. Amongs many AM methods, the Fused Deposition Modeling (FDM) technique along with PLA (Polylactic acid) material is commonly used in additive manufacturing. Until now, the mechanical properties of the AM components could not be calculated or estimated until they've been assembled and checked. In this work, a novel approach is suggested as to how the extrusion process affects the mechanical properties of the printed component to obtain how the parts can be manufactured or printed to achieve improved mechanical properties. This methodology is based on an experimental procedure in which the combination of parameters to achieve an optimal from a manufacturing experiment and its value can be determined, the results obtained show the effect of the extrusion process affects the mechanical properties.

Incorporation of fluorescent quantum dots for 3D printing and additive manufacturing applications

2018 ◽  
Vol 6 (28) ◽  
pp. 7584-7593 ◽  
Author(s):  
Cole D. Brubaker ◽  
Talitha M. Frecker ◽  
James R. McBride ◽  
Kemar R. Reid ◽  
G. Kane Jennings ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Quantum Dot ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Cadmium Sulfur Selenide ◽  
Functionalized Materials ◽  
Deposition Modeling ◽  
Manufacturing Applications

3D printing of cadmium sulfur selenide quantum dot functionalized materials compatible with fused deposition modeling type processes and applications.

scholarly journals Experience of implementation in educational process modern technologies of FDM 3D printing

2021 ◽  
pp. 55-59
Author(s):  
Petr Andrienko ◽  
Vladimir Vasilevskij ◽  
Ivan Vittsivskyi
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Current Transformer ◽  
Educational Process ◽  
Small Scale ◽  
Thermoplastic Material ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Modern Technologies

Fused Deposition Modeling is an additive manufacturing technology where a temperature-controlled head extrudes a thermoplastic material onto a build platform in a predetermined path. Standard, advanced thermoplastics and composites are used for printing. Among the areas of application for FDM printing, the main ones are rapid prototyping, as well as small-scale and batch production. The purpose of the work is the implementation of FDM 3D printing technology in the educational process of students in specialty 141 "Electroenergy, electrotechnics and electromechanics". The features of the technology of additive manufacturing of electrical apparatuses parts by the method of FDM printing have been investigated. Parts of four standard sizes were printed using ABS + and PLA plastics, namely, current transformer carcasses in the amount of 110 pieces and sensor bodies in the amount of 100 pieces. For printing, an FDM 3D printer was used built on the XZ Head Y Bed kinematic scheme with an open working chamber. The analysis of defects in finished products was carried out, which showed that the main defects are deviations of the actual dimensions and geometric shape of the finished products. Ways to prevent the occurrence of these defects are considered, namely, correcting the size of the model at the stage of preparing the model for printing, minimizing the filling density of the model, using brims in models, setting the optimal temperature of the working platform and simultaneously printing several products. The results of the study o features of the technology of additive manufacturing of electrical apparatuses parts by the method of FDM printing made it possible to develop a set of laboratory works for students of the specialty 141 "Electroenergy, electrotechnics and electromechanics".

Sign in / Sign up

Export Citation Format

Share Document