scholarly journals Molecular Dynamics Simulation of Cetyl Phosphate Adsorption in Flotation of Magnesite and Pertinent Chemical Aspects

Minerals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 761 ◽  
Author(s):  
Yuan Tang ◽  
Jin Yao ◽  
Wanzhong Yin ◽  
Sadan Kelebek
Keyword(s):  
Molecular Dynamics ◽  
Value Added ◽  
Md Simulations ◽  
Ion Concentration ◽  
Dynamics Simulation ◽  
Phosphate Adsorption ◽  
Chemical Equilibria ◽  
Low Concentrations ◽  
Ph Range

Magnesite ores are important resources in the production of value-added magnesium materials. Generally, low selectivity of conventional collectors and the requirement of a large amount of depressant has been a motivation for researchers to identify alternate collectors. In this work, the role of potassium cetyl phosphate (PCP) as a new collector in magnesite flotation is investigated using molecular dynamics (MD) simulations and chemical equilibria, electrokinetics and wettability. The results indicate that PCP exhibits a strong collecting ability for magnesite particles even with low concentrations. The presence of PCP leads to significant alterations in the electric double layer and contact angle behavior of magnesite, which results in rapid adsorption of PCP on magnesite surface. The results from chemical computations show that the monoanionic forms of PCP are the dominant species in the weakly acidic pH range, where monohydroxy magnesium species and the ion concentration of magnesite in suspension can be controlled by adjusting pH. The adsorption models indicate that the stable adsorption of PCP on magnesite surfaces occurs spontaneously, supporting the potentiality for selective magnesite flotation in its separation from other carbonate minerals.

scholarly journals Understanding Covalent Grafting of Nanotubes onto Polymer Nanocomposites: Molecular Dynamics Simulation Study

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2621
Author(s):  
Seunghwa Yang
Keyword(s):  
Molecular Dynamics ◽  
Load Transfer ◽  
Cell Model ◽  
Md Simulations ◽  
Dynamics Simulation ◽  
Covalent Grafting ◽  
Modelling Strategies ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
External Loads

Here, we systematically interrogate the effects of grafting single-walled (SWNT) and multi-walled carbon nanotubes (MWNT) to polymer matrices by using molecular dynamics (MD) simulations. We specifically investigate key material properties that include interfacial load transfer, alteration of nanotube properties, and dispersion of nanotubes in the polymer matrix. Simulations are conducted on a periodic unit cell model of the nanocomposite with a straight carbon nanotube and an amorphous polyethylene terephthalate (PET) matrix. For each type of nanotube, either 0%, 1.55%, or 3.1% of the carbon atoms in the outermost nanotubes are covalently grafted onto the carbon atoms of the PET matrix. Stress-strain curves and the elastic moduli of nanotubes and nanocomposites are determined based on the density of covalent grafting. Covalent grafting promotes two rivalling effects with respect to altering nanotube properties, and improvements in interfacial load transfer in the nanocomposites are clearly observed. The enhanced interface enables external loads applied to the nanocomposites to be efficiently transferred to the grafted nanotubes. Covalent functionalization of the nanotube surface with PET molecules can alter the solubility of nanotubes and improve dispersibility. Finally, we discuss the current limitations and challenges in using molecular modelling strategies to accurately predict properties on the nanotube and polymers systems studied here.

A Study on the Uniaxial Tension of FCC Metals at Nano Level Using MD

2008 ◽  
Vol 32 ◽  
pp. 255-258
Author(s):  
Bohayra Mortazavi ◽  
Akbar Afaghi Khatibi
Keyword(s):  
Molecular Dynamics ◽  
Uniaxial Tension ◽  
Md Simulations ◽  
Dynamics Simulation ◽  
Face Centered Cubic ◽  
Engineering Strain ◽  
Fcc Metals ◽  
Engineering Stress ◽  
Nano Science ◽  
Face Centered

Molecular Dynamics (MD) are now having orthodox means for simulation of matter in nano-scale. It can be regarded as an accurate alternative for experimental work in nano-science. In this paper, Molecular Dynamics simulation of uniaxial tension of some face centered cubic (FCC) metals (namely Au, Ag, Cu and Ni) at nano-level have been carried out. Sutton-Chen potential functions and velocity Verlet formulation of Noise-Hoover dynamic as well as periodic boundary conditions were applied. MD simulations at different loading rates and temperatures were conducted, and it was concluded that by increasing the temperature, maximum engineering stress decreases while engineering strain at failure is increasing. On the other hand, by increasing the loading rate both maximum engineering stress and strain at failure are increasing.

Molecular Dynamics Simulation of a Pullout Test on a Carbon Nanotube in a Polymer Matrix

2014 ◽  
Vol 1700 ◽  
pp. 61-66
Author(s):  
Guttormur Arnar Ingvason ◽  
Virginie Rollin
Keyword(s):  
Molecular Dynamics ◽  
Polymer Matrix ◽  
Large Scale ◽  
Md Simulations ◽  
Dynamics Simulation ◽  
Atomistic Simulations ◽  
Polymer Molecules ◽  
Molecular Potential ◽  
Pull Out ◽  
Walled Carbon Nanotubes

ABSTRACTAdding single walled carbon nanotubes (SWCNT) to a polymer matrix can improve the delamination properties of the composite. Due to the complexity of polymer molecules and the curing process, few 3-D Molecular Dynamics (MD) simulations of a polymer-SWCNT composite have been run. Our model runs on the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS), with a COMPASS (Condensed phase Optimized Molecular Potential for Atomistic Simulations Studies) potential. This potential includes non-bonded interactions, as well as bonds, angles and dihedrals to create a MD model for a SWCNT and EPON 862/DETDA (Diethyltoluenediamine) polymer matrix. Two simulations were performed in order to test the implementation of the COMPASS parameters. The first one was a tensile test on a SWCNT, leading to a Young’s modulus of 1.4 TPa at 300K. The second one was a pull-out test of a SWCNT from an originally uncured EPON 862/DETDA matrix.

scholarly journals An Analysis Based on Molecular Docking and Molecular Dynamics Simulation Study of Bromelain as Anti-SARS-CoV-2 Variants

2021 ◽  
Vol 12 ◽  
Author(s):  
Trina Ekawati Tallei ◽  
Fatimawali ◽  
Afriza Yelnetty ◽  
Rinaldi Idroes ◽  
Diah Kusumawaty ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Molecular Docking ◽  
Molecular Dynamics Simulation ◽  
Three Dimensional ◽  
Md Simulations ◽  
Inhibitory Effect ◽  
Dynamics Simulation ◽  
Novel Coronavirus

The rapid spread of a novel coronavirus known as SARS-CoV-2 has compelled the entire world to seek ways to weaken this virus, prevent its spread and also eliminate it. However, no drug has been approved to treat COVID-19. Furthermore, the receptor-binding domain (RBD) on this viral spike protein, as well as several other important parts of this virus, have recently undergone mutations, resulting in new virus variants. While no treatment is currently available, a naturally derived molecule with known antiviral properties could be used as a potential treatment. Bromelain is an enzyme found in the fruit and stem of pineapples. This substance has been shown to have a broad antiviral activity. In this article, we analyse the ability of bromelain to counteract various variants of the SARS-CoV-2 by targeting bromelain binding on the side of this viral interaction with human angiotensin-converting enzyme 2 (hACE2) using molecular docking and molecular dynamics simulation approaches. We have succeeded in making three-dimensional configurations of various RBD variants using protein modelling. Bromelain exhibited good binding affinity toward various variants of RBDs and binds right at the binding site between RBDs and hACE2. This result is also presented in the modelling between Bromelain, RBD, and hACE2. The molecular dynamics (MD) simulations study revealed significant stability of the bromelain and RBD proteins separately up to 100 ns with an RMSD value of 2 Å. Furthermore, despite increases in RMSD and changes in Rog values of complexes, which are likely due to some destabilized interactions between bromelain and RBD proteins, two proteins in each complex remained bonded, and the site where the two proteins bind remained unchanged. This finding indicated that bromelain could have an inhibitory effect on different SARS-CoV-2 variants, paving the way for a new SARS-CoV-2 inhibitor drug. However, more in vitro and in vivo research on this potential mechanism of action is required.

The role of optical phonons in intermediate layer-mediated thermal transport across solid interfaces

2017 ◽  
Vol 19 (28) ◽  
pp. 18407-18415 ◽  
Author(s):  
Eungkyu Lee ◽  
Tengfei Luo
Keyword(s):  
Molecular Dynamics ◽  
Molecular Dynamics Simulation ◽  
Optical Phonon ◽  
Thermal Transport ◽  
Intermediate Layer ◽  
Dynamics Simulation ◽  
Optical Phonons ◽  
Spectral Matching

A study with molecular dynamics simulation shows that optical phonon vibrational spectral matching by an intermediate layer can significantly impact thermal transport across diatomic solid interfaces.

Sign in / Sign up

Export Citation Format

Share Document