scholarly journals Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1894
Author(s):  
Ramona Oltramare ◽  
Matej Par ◽  
Dirk Mohn ◽  
Daniel B. Wiedemeier ◽  
Thomas Attin ◽  
...  
Keyword(s):  
Bond Strength ◽  
Bioactive Glass ◽  
Control Group ◽  
Long Term Effects ◽  
Control Groups ◽  
Dental Adhesives ◽  
Etch And Rinse ◽  
Short And Long Term ◽  
Self Etch

This study investigated the short- and long-term effects of dental adhesives doped with nano-sized bioactive glass 45S5 (BAG) on the resin–dentin interfacial bond strength. Two etch-and-rinse adhesives (Adper Scotchbond Multi-Purpose (ASB) and Solobond Plus (SB)) and one self-etch adhesive (Clearfil SE Bond (CF)) were doped with different concentrations of BAG (5, 10, and 20 wt%). The unmodified (0 wt% BAG) commercial adhesives served as control groups. Dentin of 120 molars (n = 10 per group) was treated with the different adhesives, followed by buildups with a conventional composite restorative material. From each tooth, 14 sticks were prepared for micro-tensile bond strength (µTBS) testing. The sticks were stored in simulated body fluid at 37 °C and tested after 24 h or six months for µTBS and failure mode. Data were analyzed using Kruskal–Wallis tests in combination with post-hoc Conover-tests and Wilcoxon signed-rank tests at a level of significance of a = 0.05. After 24 h and six months, both etch-and-rinse adhesives with a low BAG content (up to 10 wt% for ASB and 5 wt% for SB) showed similar µTBSs as their respective control groups (0 wt% BAG). CF showed a significant decrease in µTBS even after addition of 5 wt% BAG. At a high concentration of added BAG (20 wt%), all three adhesives showed a significant decrease in µTBS compared to the unmodified controls. The CF control group showed significantly lower µTBS after 6 months of storage than after 24 h. In contrast, the µTBS of all CF groups modified with BAG was unaffected by aging. In conclusion, the tested etch-and-rinse adhesives can be modified with up to 5 wt% (SB), or 10 wt% (ASB) of BAG without reducing their short- and long-term dentin bond strength. Moreover, the addition of nano-sized BAG may prevent long-term bond strength deterioration of a self-etch adhesive.

Time-Dependent Changes in Excitability After One-Trial Conditioning of Hermissenda

1997 ◽  
Vol 78 (6) ◽  
pp. 3460-3464 ◽  
Author(s):  
Terry Crow ◽  
Vilma Siddiqi
Keyword(s):  
Time Dependent ◽  
Control Group ◽  
Type B ◽  
Control Groups ◽  
Phototactic Behavior ◽  
Parallel Processes ◽  
Short And Long Term ◽  
A Site ◽  
Different Levels

Crow, Terry and Vilma Siddiqi. Time-dependent changes in excitability after one-trial conditioning of Hermissenda. J. Neurophysiol. 78: 3460–3464, 1997. The visual system of Hermissenda has been studied extensively as a site of cellular plasticity produced by classical conditioning. A one-trial conditioning procedure consisting of light paired with the application of serotonin (5-HT) to the exposed, but otherwise intact, nervous system produces suppression of phototactic behavior tested 24 h after conditioning. Short- and long-term enhancement (STE and LTE) of excitability in identified type B photoreceptors is a cellular correlate of one-trial conditioning. LTE can be expressed in the absence of STE suggesting that STE and LTE may be parallel processes. To examine the development of enhancement, we studied its time-dependent alterations after one-trial conditioning. Intracellular recordings from identified type B photoreceptors of independent groups collected at different times after conditioning revealed that enhanced excitability follows a biphasic pattern in its development. The analysis of spikes elicited by 2 and 30 s extrinsic current pulses at different levels of depolarization showed that enhancement reached a peak 3 h after conditioning. From its peak, excitability decreased toward baseline control levels 5–6 h after conditioning followed by an increase to a stable plateau at 16 to 24 h postconditioning. Excitability changes measured in cells from unpaired control groups showed maximal changes 1 h posttreatment that rapidly decremented within 2 h. The conditioned stimulus (CS) elicited significantly more spikes 24 h postconditioning for the conditioned group as compared with the unpaired control group. The analysis of the time-dependent development of enhancement may reveal the processes underlying different stages of memory for this associative experience.

Effect of a novel prime‐and‐rinse approach on short‐ and long‐term dentin bond strength of self‐etch adhesives

2019 ◽  
Vol 127 (6) ◽  
pp. 547-555 ◽  
Author(s):  
Mingxing Li ◽  
Jingqiu Xu ◽  
Ling Zhang ◽  
Chaoyang Wang ◽  
Xiaoting Jin ◽  
...  
Keyword(s):  
Bond Strength ◽  
Short And Long Term ◽  
Self Etch

Effect of Nd:YAG Laser Irradiation Pretreatment on the Long-Term Bond Strength of Etch-and-Rinse Adhesive to Dentin

2017 ◽  
Vol 42 (1) ◽  
pp. 62-72 ◽  
Author(s):  
J Gan ◽  
S Liu ◽  
L Zhou ◽  
Y Wang ◽  
J Guo ◽  
...  
Keyword(s):  
Bond Strength ◽  
Laser Irradiation ◽  
Nd:Yag Laser ◽  
Knoop Hardness ◽  
Control Group ◽  
In Vitro Test ◽  
Dentin Surface ◽  
Etch And Rinse ◽  
Significant Difference

SUMMARY Purpose: To investigate the effect of neodymium-doped yttrium aluminum garnet (Nd:YAG) laser irradiation pretreatment on the long-term bond strength of an etch-and-rinse adhesive to dentin. Methods: Fifty molars were sectioned parallel to the occlusal plane and randomly divided into two groups (n=25 per group): control group (no treatment) and laser group (dentin surfaces were treated with Nd:YAG laser at a setting of 100 mJ/10 Hz). Afterward, resin was bonded to the dentin surface using a two-step etch-and-rinse adhesive (Adper SingleBond 2), and then 150 beams of each group were produced. Each group was divided into three subgroups (n=50 each group): 24 hours of water storage, thermocycling, and NaOCl storage. The microtensile bond strength (MTBS), failure modes, nanoleakage expression, and Masson's trichrome staining were evaluated. An additional 20 molars were sectioned to obtain 2-mm-thick flat dentin slices. These slices were randomly divided into control and laser-treated groups as mentioned previously. Then slices of each group were examined by scanning electron microscopy, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), and the Knoop hardness test. Results: The results of ATR-FTIR and Masson's trichrome verified that laser irradiation partly removed collagen fibers from the dentin surface; however, no significant difference was found in the Knoop hardness (p>0.05). The XRD result showed similar crystalline structure regardless of laser pretreatment. There is no significant difference in short-term MTBS between control and laser-treated groups (p>0.05); however, long-term MTBS differed between the groups (p>0.05). Furthermore, the laser-treated group showed less silver deposition than the control group after aging (p<0.05). Conclusion: Pretreatment by Nd:YAG laser irradiation appeared to have a positive effect on the adhesive-dentin bonding in vitro test, and the bonding effectiveness could be preserved after aging.

scholarly journals The Effect of SnCl2/AmF Pretreatment on Short- and Long-Term Bond Strength to Eroded Dentin

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Katrin Zumstein ◽  
Anne Peutzfeldt ◽  
Adrian Lussi ◽  
Simon Flury
Keyword(s):  
Bond Strength ◽  
Failure Mode ◽  
Resin Composite ◽  
Adhesive System ◽  
Adhesive Systems ◽  
Short And Long Term ◽  
One Year ◽  
And Storage ◽  
Self Etch

This study investigated the effect of SnCl2/AmF pretreatment on short- and long-term bond strength of resin composite to eroded dentin mediated by two self-etch, MDP-containing adhesive systems. 184 dentin specimens were produced from extracted human molars. Half the specimens (n=92) were artificially eroded, and half were left untreated. For both substrates, half the specimens were pretreated with SnCl2/AmF, and half were left untreated. The specimens were treated with Clearfil SE Bond or Scotchbond Universal prior to application of resin composite. Microtensile bond strength (μTBS) was measured after 24 h or 1 year. Failure mode was detected and EDX was performed. μTBS results were statistically analyzed (α=0.05). μTBS was significantly influenced by the dentin substrate (eroded < noneroded dentin) and storage time (24 h > 1 year; p<0.0001) but not by pretreatment with SnCl2/AmF or adhesive system. The predominant failure mode was adhesive failure at the dentin-adhesive interface. The content of Sn was generally below detection limit. Pretreatment with SnCl2/AmF did not influence short- and long-term bond strength to eroded dentin. Bond strength was reduced after storage for one year, was lower to eroded dentin than to noneroded dentin, and was similar for the two adhesive systems.

scholarly journals Short- and long-term effects of using shooting straps on free-throw accuracy of young female basketball players

Kinesiology ◽  
2017 ◽  
Vol 49 (2) ◽  
pp. 225-234 ◽  
Author(s):  
Miguel-Ángel Gómez ◽  
Jaime Sampaio
Keyword(s):  
Basketball Player ◽  
Control Group ◽  
Long Term Effects ◽  
Basketball Players ◽  
Intervention Training ◽  
Free Throw ◽  
Short And Long Term ◽  
One Year ◽  
Experimental Group

This study identified the short- and long-term effects of using a shooting strap on the accuracy of freethrows performed by U15 female basketball players during training and competition. Thirty six female<br>basketball player volunteers (aged 14.3±0.5 years) from the Lithuanian Schoolchildren Basketball League were randomly assigned to either an experimental or control group. The experimental group used a shooting strap that immobilized movements of the supporting hand while shooting. The control group performed freethrows without any training aid. Learning and transfer of performance was assessed before and after the intervention training sessions (4-week intervention program applied 4 times per week), and on a retention test after one year. Results showed that: (a) free-throw accuracy was higher after one month and after one year of intervention than before the intervention training program in both practice and competition; (b) the experimental group scored better in practice and competition than the control group after one month and one year of the intervention; and (c) free-throw accuracy was higher during training sessions than during&nbsp;competition. The identified short-term and long-term improvements in free-throw shooting accuracy support the usage of shooting straps. The use of shooting straps and external assisting devices might allow adjusting programs of training to provide fluent free-throw accuracy progresses from youth to senior categories.

scholarly journals Permeability of Modified Dentinal Surfaces

2021 ◽  
Vol 11 (4) ◽  
pp. 272-287
Author(s):  
Manar M Abu Nawareg ◽  
Ola I Fahmy ◽  
Gihan A Abdel Rahman
Keyword(s):  
Fluid Transport ◽  
Control Group ◽  
Single Bond ◽  
Control Groups ◽  
Surface Pretreatment ◽  
Dentin Permeability ◽  
Etch And Rinse ◽  
One Step ◽  
Self Etch ◽  
Long Storage

Objectives: The aim of this study was to investigate the sealing ability of three adhesives bonded to modified dentinal surfaces after short and long storage periods. Methods: Three adhesives were used in this study; two-step etch-and-rinse “Adper Single Bond 2”, two-step self-etch “AdheSE” and one-step self-etch “G-Bond” adhesives. Modifications of the dentinal surface was performed by application of adhesives after oxalate application, application of adhesive after oxalate application to sodium hypochlorite (NaOCl)-deproteinized dentinal surface, compared to control groups (application of adhesive without any surface pretreatment). Dentinal sealing was investigated by measuring dentin permeability, using a fluid transport apparatus, after two storage periods; 24 hours and 2 months. Results: After 24 hours, the control group bonded with “Adper Single Bond 2” without any surface treatment had the highest permeability (25.3%) followed by “G-Bond” (16.2%) and finally “AdheSE” (11%). Significant reductions in permeability values were observed on application of oxalate in conjunction with both “Adper Single Bond 2” and “AdheSE” (11.7% and 2.6% respectively). Further significant reductions in permeability values of those two adhesives were noted when the combined NaOCl and oxalate pretreatments were used (5.7% and 0.8% respectively). Permeability means for all groups increased after storage for 2 months. Conclusions: Dentin surface deproteinization plus oxalate application produced the best dentin sealing for two step adhesives. Key words: Etch-and-rinse adhesives, self-etching adhesives, oxalate-desensitizing agent, NaOCl-deproteinizing agent, dentin permeability.

scholarly journals The effects of different surface contaminators on the shear bond strength of a universal adhesive system to dentin: an experimental study

2021 ◽  
Vol 15 (2) ◽  
pp. 82-86
Author(s):  
Mahmoud Bahari ◽  
Siavash Savadi Oskoee ◽  
Mohammad Esmaeel Ebrahimi Chaharom ◽  
Nasim Molayi
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Adhesive System ◽  
Aluminium Chloride ◽  
Control Group ◽  
Universal Adhesive ◽  
Human Teeth ◽  
Etch And Rinse ◽  
Self Etch ◽  
Composite Samples

Background. Contamination of dentin surface is one of the common problems in restorative dentistry. The aim was to investigate the effects of different surface contaminators on the dentin shear bond strength (SBS) of universal adhesive system (UAS) applied in etch-and-rinse (ER) and self-etch (SE) strategies. Methods. One hundred forty-four maxillary anterior sound human teeth were divided into six groups based on the types of surface contaminators: no surface contaminator (control) and experimental groups contaminated with blood, saliva, aluminium chloride (ALC), ferric sulphate (FS), and caries disclosing agent (CDA). Then, each group was further subdivided into two, based on the application strategy of UAS (ER and SE). After applying the adhesive according to the manufacturer’s instructions, and bonding cylindrical composite samples, the SBS was measured. The data were analysed using two-way ANOVA, Tukey’s HSD test and t test (P<0.05). Results. The SBS in all contaminated groups, except for CDA, was significantly lower in both ER and SE strategies compared to control group (P<0.05). A comparison between the application strategies revealed that ER and SE were only significantly different in the FS contaminated group (P<0.05). Conclusion. All tested contaminators, except CDA, significantly decreased SBS of UAS in both ER and SE strategies.

Effect of Different Adhesive Systems Used for Immediate Dentin Sealing on Bond Strength of a Self-Adhesive Resin Cement to Dentin

2018 ◽  
Vol 43 (4) ◽  
pp. 391-397 ◽  
Author(s):  
RC Ferreira-Filho ◽  
C Ely ◽  
RC Amaral ◽  
JA Rodrigues ◽  
J-F Roulet ◽  
...  
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Water Storage ◽  
Resin Cement ◽  
Control Group ◽  
Adhesive Systems ◽  
Adhesive Resin ◽  
Etch And Rinse ◽  
Adhesive Resin Cement ◽  
Self Etch

SUMMARY Objective: The purpose of this study was to investigate the immediate and three-month water storage behavior of adhesives when used for immediate dentin sealing (IDS). Methods and Materials: Four adhesive systems were used to perform IDS: a one-step self-etch (Xeno V), a two-step self-etch (Clearfil SE Bond), a two-step etch-and-rinse (XP Bond), and a three-step etch-and-rinse (Optibond FL). For the control group, IDS was not performed. The self-adhesive resin cement RelyX Unicem was used for the luting procedures. After seven days of water storage, specimens (n=6) were sectioned into beams (n=5) with an approximately 1-mm2 cross-sectional area. Half of the specimens were tested in tension after seven days of water storage at 37°C, while the other half was stored for three months prior to testing in tension using a universal testing machine (1 mm/min). The failure pattern was determined using a stereomicroscope and scanning electron microscopy. Microtensile bond strength (μTBS) data were statistically analyzed by two-way analysis of variance and Tukey post hoc test (α=0.05). Results: After seven days, the control group presented the lowest μTBS but did not differ from XP Bond and Clearfil SE Bond. After three months, there was no μTBS difference between the IDS groups and the control. Conclusions: After seven days of water storage, the groups with IDS presented higher μTBS values than the control group, although XP Bond and Clearfil SE Bond did not present significant differences. However, after three months of storage in water, IDS groups did not differ significantly from control group, which did not receive IDS.

Microleakage and Shear Bond Strength of Composite Restorations Under Cycling Conditions

2017 ◽  
Vol 42 (2) ◽  
pp. E71-E80 ◽  
Author(s):  
RF Zanatta ◽  
M Lungova ◽  
AB Borges ◽  
CRG Torres ◽  
H-G Sydow ◽  
...  
Keyword(s):  
Bond Strength ◽  
Thermal Cycling ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Control Group ◽  
Strength Testing ◽  
Class V ◽  
Composite Restorations ◽  
Etch And Rinse ◽  
Self Etch

SUMMARY Objectives: The aim of this study was to evaluate microleakage and shear bond strength of composite restorations under different cycling conditions. Methods and Materials: Class V cavities were prepared in the buccal and lingual surfaces of 30 human molars (n=60). A further 60 molars were used to prepare flat enamel and dentin specimens (n=60 each). Cavities and specimens were divided into six groups and pretreated with an adhesive (self-etch/Clearfil SE Bond or etch-and-rinse/Optibond FL). Composite was inserted in the cavities or adhered to the specimens' surfaces, respectively, and submitted to cycling (control: no cycling; thermal cycling: 10,000 cycles, 5°C to 55°C; thermal/erosive cycling: thermal cycling plus storage in hydrochloric acid pH 2.1, 5 minutes, 6×/day, 8 days). Microleakage was quantified by stereomicroscopy in enamel and dentin margins after immersion in silver nitrate. Specimens were submitted to shear bond strength testing. Statistical analysis was done by two-way analysis of variance and Kruskal-Wallis tests (p&lt;0.05). Results: Microleakage in enamel margins was significantly lower in the control group compared with thermal cycling or thermal/erosive cycling. Erosive conditions increased microleakage compared with thermal cycling (significant only for Clearfil SE Bond). No significant differences were observed in dentin margins. Bond strength of enamel specimens was reduced by thermal cycling and thermal/erosive cycling when Clearfil SE Bond was used and only by thermal/erosive cycling when Optibond FL was used. No differences were observed among dentin specimens. Conclusions: Thermal/erosive cycling can adversely affect microleakage and shear bond strength of composite resin bonded to enamel.

Sign in / Sign up

Export Citation Format

Share Document