scholarly journals Palm Kernel Shell Activated Carbon as an Inorganic Framework for Shape-Stabilized Phase Change Material

Nanomaterials ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 689 ◽  
Author(s):  
Ahmad Nicholas ◽  
Mohd Hussein ◽  
Zulkarnain Zainal ◽  
Tumirah Khadiran
Keyword(s):  
Activated Carbon ◽  
Phase Change ◽  
Phase Change Material ◽  
Average Pore Size ◽  
Research Work ◽  
Palm Kernel ◽  
Thermal Reliability ◽  
Average Pore ◽  
Palm Kernel Shell ◽  
Change Material

The preparation of activated carbon using palm kernel shells as the precursor (PKSAC) was successfully accomplished after the parametric optimization of the carbonization temperature, carbonization holding time, and the ratio of the activator (H3PO4) to the precursor. Optimization at 500 °C for 2 h of carbonization with 20% H3PO4 resulted in the highest surface area of the activated carbon (C20) of 1169 m2 g−1 and, with an average pore size of 27 Å. Subsequently, the preparation of shape-stabilized phase change material (SSPCM-C20) was done by the encapsulation of n-octadecane into the pores of the PKSAC, C20. The field emission scanning electron microscope images and the nitrogen gas adsorption-desorption isotherms show that n-octadecane was successfully encapsulated into the pores of C20. The resulting SSPCM-C20 nano-composite shows good thermal reliability which is chemically and thermally stable and can stand up to 500 melting and freezing cycles. This research work provided a new strategy for the preparation of SSPCM material for thermal energy storage application generated from oil palm waste.

Preparation and Characterization of Single and Mixed Activated Carbons Derived from Coconut Shell and Palm Kernel Shell through Chemical Activation Using Microwave Irradiation System

2017 ◽  
Vol 889 ◽  
pp. 215-220 ◽  
Author(s):  
Siti Anis Mohd Amran ◽  
Khudzir Ismail ◽  
Azil Bahari Alias ◽  
Syed Shatir Asghrar Syed-Hassan ◽  
Ali H. Jawad
Keyword(s):  
Activated Carbon ◽  
Pore Size ◽  
Iodine Number ◽  
Average Pore Size ◽  
Palm Kernel ◽  
Coconut Shell ◽  
Activation Process ◽  
Average Pore ◽  
Palm Kernel Shell ◽  
Percentage Removal

Single and mixed coconut shell (CS) and palm kernel shell (PKS) were successfully converted to activated carbon by using potassium hydroxide (KOH) as activating agent. Mixed activated carbon was produced from coconut shell: palm kernel shell at different KOH concentrations of 30%, 40% and 50%. Activation process was performed in a conventional microwave oven at fixed power and time of 600W and 20 minutes respectively. The results showed that activated carbon produced from single and mixed biomass at 40% concentration of KOH exhibited higher adsorption capacity for iodine number and percentage removal of MB with comparison to 30% and 50% of KOH concentrations. The highest BET surface area of 441.19 m2/g was obtained by CSAc-40. Further both CSAc-40 and PKSAc-40 produced an average pore size diameter of less than 2.0 nm which is in the range of micropore region. On contrary, the mixed CSPKSAc-40 produced an average pore size diameter of 6.0 nm which is in the region of mesopore. All the CSAc-40, PKSAc-40 and mixed CSPKSAc-40 showed similar adsorption trend for iodine number and percentage removal of MB. Interestingly, this finding showed that in the mixed activated carbon some chemical reactions might have occurred during the activation process producing mesoporous instead of microporous as obtained by the single biomass activated carbon.

scholarly journals The effect of surface area on the properties of shape-stabilized phase change material prepared using palm kernel shell activated carbon

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Ahmad Fariz Nicholas ◽  
Mohd Zobir Hussein ◽  
Zulkarnain Zainal ◽  
Tumirah Khadiran
Keyword(s):  
Activated Carbon ◽  
Energy Storage ◽  
Phase Change ◽  
Surface Area ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Palm Kernel ◽  
Palm Kernel Shell ◽  
Surface Areas ◽  
Change Material

Abstract The effect of the surface area of palm kernel shell activated carbon (PKSAC) on the properties of n-octadecane-encapsulated shape stabilized phase change material (SSPCM) for thermal energy storage (TES) application were studied. Various surface areas of the PKSAC were prepared using different amounts of H3PO4 treatment given to palm kernel shells from 0, 5, 10, 30 and 40% before the activation. The impregnation of n-octadecane into the different surface areas of PKSACs produced SSPCMs with different physico-chemical characteristics. The DSC analysis indicates that the higher the surface area of the PKSAC resulted in the higher freezing temperature due to the higher PCM loading that was encapsulated into the PKSAC pores. The results obtained from XRD, FESEM, Raman spectroscopy, TGA/DTG and leakage study indicate that the PKSAC is a good framework material for the development of n-octadecane-encapsulated SSPCM. It was also found that the surface area and porosity of the frameworks, activated carbon play an important role on the PCM loading percentage and their ability to be used as a thermal energy storage material.

Lead Sorption by Carbon Nanofibers Grown on Powdered Activated Carbon — Kinetics and Equilibrium

NANO ◽  
2015 ◽  
Vol 10 (02) ◽  
pp. 1550017 ◽  
Author(s):  
Abdullah Al Mamun ◽  
Yehya M. Ahmed ◽  
Ma'an Fahmi R. AlKhatib ◽  
Ahmad Tariq Jameel ◽  
Mohammed Abdul Hakeem Abdul Rahman AlSaadi
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Carbon Nanofibers ◽  
Research Work ◽  
Palm Kernel ◽  
Solid Substrate ◽  
Second Order ◽  
Powdered Activated Carbon ◽  
Palm Kernel Shell ◽  
Pseudo Second Order

Carbon nanofibers (CNFs) were synthesized by using a safe and less hazardous method, compared to using floating catalysts in chemical vapor deposition (CVD) process. This process used C 2 H 2 as carbon source and oil palm kernel shell-based powdered activated carbon (PAC) as cheap solid substrate. Use of nickel ( Ni 2+) impregnated PAC as fixed substrate for the synthesis of CNF is one of the novelties of the research work accomplished by the authors. The PAC–CNFs porous nanocomposite product was used for the sorption of lead ions ( Pb 2+) from synthetic aqueous solution. Kinetics of Pb 2+ adsorption and isotherms were investigated by varying initial concentration of lead and contact time. PAC–CNFs were found to remove Pb 2+ better at acidic pH of about 5.5. Langmuir and Freundlich isotherms were applied to the sorption equilibrium data to find the best fitted model. Langmuir isotherm model with R2 = 0.965 fitted the adsorption data better than the Freundlich isotherm. The kinetic processes of Pb 2+ adsorption on CNFs were investigated by applying different kinetic models, namely zero-order, pseudo-first-order and pseudo-second-order. The pseudo-second-order rate equation exhibited the best results with R2 = 0.999, qe = 74.79 (mg/g) and K2 = 0.029 (min ⋅ g/mg). The novel nanocomposite product seemed to have the potential to remove Pb 2+ ions from aqueous solution.

Activated Carbon for Shape-Stabilized Phase Change Material

2019 ◽  
pp. 279-308 ◽  
Author(s):  
Ahmad Fariz Nicholas ◽  
Mohd Zobir Hussein ◽  
Zulkarnain Zainal ◽  
Tumirah Khadiran
Keyword(s):  
Activated Carbon ◽  
Phase Change ◽  
Phase Change Material ◽  
Change Material
Sign in / Sign up

Export Citation Format

Share Document