scholarly journals Resistance of Superhydrophobic Surface-Functionalized TiO2 Nanotubes to Corrosion and Intense Cavitation

Nanomaterials ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 783 ◽  
Author(s):  
Weidi Hua ◽  
Piyush Kar ◽  
Partha Roy ◽  
Lintong Bu ◽  
Lian Shoute ◽  
...  
Keyword(s):  
Contact Angle ◽  
Electrochemical Impedance ◽  
Saline Water ◽  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Water Jet ◽  
Fluoride Ions ◽  
Simple Method ◽  
Jet Impact ◽  
Harsh Conditions

The availability of robust superhydrophobic materials with the ability to withstand harsh environments are in high demand for many applications. In this study, we have presented a simple method to fabricate superhydrophobic materials from TiO2 nanotube arrays (TNTAs) and investigated the resilience of the materials when they are subjected to harsh conditions such as intense cavitation upon ultrasonication, corrosion in saline water, water-jet impact, and abrasion. The TNTAs were prepared by anodization of Ti foil in buffered aqueous electrolyte containing fluoride ions. The hydrophilic TNTAs were functionalized with octadecylphosphonic acid (ODPA) or 1H, 1H′, 2H, 2H′-perfluorodecyl phosphonic acid (PFDPA) to form a self-assembled monolayer on the TNTA surface to produce superhydrophobic ODPA@TNTA or PFDPA@TNTA surfaces. The superhydrophobic ODPA@TNTA and PFDPA@TNTA have contact angles of 156.0° ± 1.5° and 168° ± 1.5°, and contact angle hysteresis of 3.0° and 0.8°, respectively. The superhydrophobic ODPA@TNTA and PFDPA@TNTA were subjected to ultrasonication, corrosion in saline water, and water-jet impact and abrasion, and the resilience of the systems was characterized by electrochemical impedance spectroscopy (EIS), contact angle (CA) measurements, diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), and field-emission scanning electron microscopy (FESEM). The results presented here show that superhydrophobic ODPA@TNTA and PFDPA@TNTA are robust and resilient under the harsh conditions studied in this work, and indicate the potential of these materials to be deployed in practical applications.

scholarly journals Biomimetic Approach for the Elaboration of Highly Hydrophobic Surfaces: Study of the Links between Morphology and Wettability

Biomimetics ◽  
2021 ◽  
Vol 6 (2) ◽  
pp. 38
Author(s):  
Quentin Legrand ◽  
Stephane Benayoun ◽  
Stephane Valette
Keyword(s):  
Contact Angle ◽  
Ginkgo Biloba ◽  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Textured Surfaces ◽  
Replication Process ◽  
Wetting Behavior ◽  
Static Contact ◽  
Biomimetic Approach ◽  
Highly Hydrophobic

This investigation of morphology-wetting links was performed using a biomimetic approach. Three natural leaves’ surfaces were studied: two bamboo varieties and Ginkgo Biloba. Multiscale surface topographies were analyzed by SEM observations, FFT, and Gaussian filtering. A PDMS replicating protocol of natural surfaces was proposed in order to study the purely morphological contribution to wetting. High static contact angles, close to 135∘, were measured on PDMS replicated surfaces. Compared to flat PDMS, the increase in static contact angle due to purely morphological contribution was around 20∘. Such an increase in contact angle was obtained despite loss of the nanometric scale during the replication process. Moreover, a significant decrease of the hysteresis contact angle was measured on PDMS replicas. The value of the contact angle hysteresis moved from 40∘ for flat PDMS to less than 10∘ for textured replicated surfaces. The wetting behavior of multiscale textured surfaces was then studied in the frame of the Wenzel and Cassie–Baxter models. Whereas the classical laws made it possible to describe the wetting behavior of the ginkgo biloba replications, a hierarchical model was developed to depict the wetting behavior of both bamboo species.

The Surface Modification with Fluorocarbon Thin Films for the Prevention of Stiction in Mems

1998 ◽  
Vol 518 ◽  
Author(s):  
Sang-Ho Lee ◽  
Myong-Jong Kwon ◽  
Jin-Goo Park ◽  
Yong-Kweon Kim ◽  
Hyung-Jae Shin
Keyword(s):  
Contact Angle ◽  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Fluorocarbon Films ◽  
Perfluorodecanoic Acid ◽  
Large Hysteresis ◽  
Static Contact ◽  
Receding Contact ◽  
Highly Hydrophobic ◽  
Receding Contact Angle

AbstractHighly hydrophobic fluorocarbon films were prepared by the vapor phase (VP) deposition method in a vacuum chamber using both liquid (3M's FC40, FC722) and solid sources (perfluorodecanoic acid (CF3(CF2)8COOH), perfluorododecane (C12F26)) on Al, Si and oxide coated wafers. The highest static contact angles of water were measured on films deposited on aluminum substrate. But relatively lower contact angles were obtained on the films on Si and oxide wafers. The advancing and receding contact angle analysis using a captive drop method showed a large contact angle hysteresis (ΔH) on the VP deposited fluorocarbon films. AFM study showed poor film coverage on the surface with large hysteresis. FTIR-ATR analysis positively revealed the stretching band of CF2 groups on the VP deposited substrates. The thermal stability of films was measured at 150°C in air and nitrogen atmospheres as a function of time. The rapid decrease of contact angles was observed on VP deposited FC and PFDA films in air. However, no decrease of contact angle on them was observed in N2.

Marangoni Flow-Induced Droplet Deformation for Micromirror Applications

2009 ◽  
Author(s):  
Yen-Wen Lu ◽  
Rakesh Dhull
Keyword(s):  
Contact Angle ◽  
Contact Angle Hysteresis ◽  
Marangoni Flow ◽  
Droplet Deformation ◽  
Simple Method ◽  
Tilting Angle

A simple method that utilizes Marangoni flow to create droplet deformation and to tilt micro-objects is presented. Contact angle hysteresis is employed to prevent the droplet from rolling away from the position. The device consists of a micromirror placed on the droplet, and can produce a 6.5° tilting angle when actuated at 30 V. It also demonstrates its scanning capability and potential as a micromirror.

scholarly journals A Simple Method to Create Superhydrophobic Aluminium Surfaces

2012 ◽  
Vol 706-709 ◽  
pp. 2874-2879 ◽  
Author(s):  
R. Jafari ◽  
Masoud Farzaneh
Keyword(s):  
Contact Angle ◽  
Stearic Acid ◽  
Synergistic Effects ◽  
Low Cost ◽  
Contact Angle Hysteresis ◽  
Spray Coating ◽  
Superhydrophobic Surfaces ◽  
Water Contact ◽  
Simple Method ◽  
Static Contact

Superhydrophobic surfaces were prepared using a very simple and low-cost method by spray coating. A high static water contact angle of about 154° was obtained by deposition of stearic acid on an aluminium alloy. However, this coating demonstrated a high contact angle hysteresis (~ 30º). On the other hand, superhydrophobic surfaces with a static contact angle of about 162º and 158º, and a low contact angle hysteresis of about 3º and 5º were respectively obtained by incorporating nanoparticles of SiO2and CaCO3in stearic acid. The excellent resulting hydrophobicity is attributed to the synergistic effects of micro/nanoroughness and low surface energy. A study of the wettability of these surfaces at temperatures ranging from 20 to-10 °C showed that the superhydrophobic surface becomes rather hydrophobic at supercooled temperatures.

scholarly journals Preparation of Superhydrophobic Steel Surfaces with Chemical Stability and Corrosion

Coatings ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 398 ◽  
Author(s):  
Chongwei Du ◽  
Xiaoyan He ◽  
Feng Tian ◽  
Xiuqin Bai ◽  
Chengqing Yuan
Keyword(s):  
Contact Angle ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Chemical Stability ◽  
Superhydrophobic Surface ◽  
Contact Angle Hysteresis ◽  
Water Contact ◽  
Simple Method ◽  
Q235 Carbon Steel ◽  
Steel Surfaces

Corrosion seriously limits the long-term application of Q235 carbon steel. Herein, a simple fabrication method was used to fabricate superhydrophobic surfaces on Q235 carbon steel for anticorrosion application. The combination of structure and the grafted low-surface-energy material contributed to the formation of superhydrophobic steel surfaces, which exhibited a water contact angle of 161.6° and a contact angle hysteresis of 0.8°. Meanwhile, the as-prepared superhydrophobic surface showed repellent toward different solutions with pH ranging from 1 to 14, presenting excellent chemical stability. Moreover, the acid corrosive liquid (HCl solution with pH of 1) maintained sphere-like shape on the as-prepared superhydrophobic surface at room temperature, indicating superior corrosion resistance. This work provides a simple method to fabricate superhydrophobic steel surfaces with chemical stability and corrosion resistance.

scholarly journals Amphiphobic Nanostructured Coatings for Industrial Applications

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 787 ◽  
Author(s):  
Federico Veronesi ◽  
Giulio Boveri ◽  
Mariarosa Raimondo
Keyword(s):  
Surface Tension ◽  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Friction Reduction ◽  
Hybrid Coatings ◽  
Wetting Behavior ◽  
Wide Range ◽  
Solid Liquid

The search for surfaces with non-wetting behavior towards water and low-surface tension liquids affects a wide range of industries. Surface wetting is regulated by morphological and chemical features interacting with liquid phases under different ambient conditions. Most of the approaches to the fabrication of liquid-repellent surfaces are inspired by living organisms and require the fabrication of hierarchically organized structures, coupled with low surface energy chemical composition. This paper deals with the design of amphiphobic metals (AM) and alloys by deposition of nano-oxides suspensions in alcoholic or aqueous media, coupled with perfluorinated compounds and optional infused lubricant liquids resulting in, respectively, solid–liquid–air and solid–liquid–liquid working interfaces. Nanostructured organic/inorganic hybrid coatings with contact angles against water above 170°, contact angle with n-hexadecane (surface tension γ = 27 mN/m at 20 °C) in the 140–150° range and contact angle hysteresis lower than 5° have been produced. A full characterization of surface chemistry has been undertaken by X-ray photoelectron spectroscopy (XPS) analyses, while field-emission scanning electron microscope (FE-SEM) observations allowed the estimation of coatings thicknesses (300–400 nm) and their morphological features. The durability of fabricated amphiphobic surfaces was also assessed with a wide range of tests that showed their remarkable resistance to chemically aggressive environments, mechanical stresses and ultraviolet (UV) radiation. Moreover, this work analyzes the behavior of amphiphobic surfaces in terms of anti-soiling, snow-repellent and friction-reduction properties—all originated from their non-wetting behavior. The achieved results make AM materials viable solutions to be applied in different sectors answering several and pressing technical needs.

Empirical Formulae in Correlating Droplet Shape and Contact Angle

2016 ◽  
Vol 69 (4) ◽  
pp. 431 ◽  
Author(s):  
Ten It Wong ◽  
Hao Wang ◽  
Fuke Wang ◽  
Sau Leng Sin ◽  
Cheng Gen Quan ◽  
...  
Keyword(s):  
Contact Angle ◽  
Empirical Formula ◽  
Contact Angles ◽  
Shape Deformation ◽  
Direct Identification ◽  
Simple Method ◽  
Droplet Shape ◽  
Spherical Dome ◽  
Angle Measurements ◽  
Contact Angle Measurements

In contact angle measurements, direct identification of the contact angles from images taken from a goniometer suffers from errors caused by optical scatterings. Contact angles can be more accurately identified by the height and width of the droplet. Spherical dome is a simple model used to correlate the contact angles to the droplet shape; however, it features intrinsic errors caused by gravity-induced shape deformation. This paper demonstrates a simple method of obtaining an empirical formula, determined from experiments, to correct the gravity-induced error in the spherical dome model for contact angle calculations. A series of contact angles, heights, and surface contact widths are simultaneously collected for a large amount of samples, and the contact angles are also calculated using the spherical dome model. The experimental data are compared with those obtained from the spherical dome model to acquire an empirical formula for contact angles. Compared with the spherical dome model, the empirical formula can reduce the average errors of the contact angle from –16.3 % to 0.18 %. Furthermore, the same method can be used to correct the gravity errors in the spherical dome for the volume (calculated by height and width), height (calculated by contact angle and volume), and width (calculated by contact angle and volume), and the spherical dome errors can be reduced from –20.9 %, 24.6 %, and –4.8 % to 2 %, –0.13 %, and –0.6 %, respectively. Our method is generic and applicable for all kinds of solvent and substrates, and the derived empirical formulae can be directly used for water droplets on any substrate.

Dynamic contact angles and contact angle hysteresis

1977 ◽  
Vol 62 (2) ◽  
pp. 205-212 ◽  
Author(s):  
Rulon E Johnson ◽  
Robert H Dettre ◽  
Dale A Brandreth
Keyword(s):  
Contact Angle ◽  
Contact Angle Hysteresis ◽  
Dynamic Contact ◽  
Contact Angles
Sign in / Sign up

Export Citation Format

Share Document