scholarly journals Surface Immobilization of Nano-Silver on Polymeric Medical Devices to Prevent Bacterial Biofilm Formation

Pathogens ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 93 ◽  
Author(s):  
Riau ◽  
Aung ◽  
Setiawan ◽  
Yang ◽  
Yam ◽  
...  
Keyword(s):  
Medical Devices ◽  
Biofilm Formation ◽  
Culture Media ◽  
Silver Ions ◽  
Bacterial Biofilm ◽  
Surface Immobilization ◽  
Nano Silver ◽  
Gram Positive Bacteria ◽  
Tissue Microenvironment

: Bacterial biofilm on medical devices is difficult to eradicate. Many have capitalized the anti-infective capability of silver ions (Ag+) by incorporating nano-silver (nAg) in a biodegradable coating, which is then laid on polymeric medical devices. However, such coating can be subjected to premature dissolution, particularly in harsh diseased tissue microenvironment, leading to rapid nAg clearance. It stands to reason that impregnating nAg directly onto the device, at the surface, is a more ideal solution. We tested this concept for a corneal prosthesis by immobilizing nAg and nano-hydroxyapatite (nHAp) on poly(methyl methacrylate), and tested its biocompatibility with human stromal cells and antimicrobial performance against biofilm-forming pathogens, Pseudomonas aeruginosa and Staphylococcus aureus. Three different dual-functionalized substrates—high Ag (referred to as 75:25 HAp:Ag); intermediate Ag (95:5 HAp:Ag); and low Ag (99:1 HAp:Ag) were studied. The 75:25 HAp:Ag was effective in inhibiting biofilm formation, but was cytotoxic. The 95:5 HAp:Ag showed the best selectivity among the three substrates; it prevented biofilm formation of both pathogens and had excellent biocompatibility. The coating was also effective in eliminating non-adherent bacteria in the culture media. However, a 28-day incubation in artificial tear fluid revealed a ~40% reduction in Ag+ release, compared to freshly-coated substrates. The reduction affected the inhibition of S. aureus growth, but not the P. aeruginosa. Our findings suggest that Ag+ released from surface-immobilized nAg diminishes over time and becomes less effective in suppressing biofilm formation of Gram-positive bacteria, such as S. aureus. This advocates the coating, more as a protection against perioperative and early postoperative infections, and less as a long-term preventive solution.

Bacterial biofilm behavior in water-supply lines of dental units

1992 ◽  
Vol 50 (1) ◽  
pp. 882-883
Author(s):  
B.D. Tall ◽  
K.S. George ◽  
R. T. Gray ◽  
H.N. Williams
Keyword(s):  
Water Supply ◽  
Medical Devices ◽  
Biofilm Formation ◽  
Bacterial Biofilm

Studies of bacterial behavior in many environments have shown that most organisms attach to surfaces, forming communities of microcolonies called biofilms. In contaminated medical devices, biofilms may serve both as reservoirs and as inocula for the initiation of infections. Recently, there has been much concern about the potential of dental units to transmit infections. Because the mechanisms of biofilm formation are ill-defined, we investigated the behavior and formation of a biofilm associated with tubing leading to the water syringe of a dental unit over a period of 1 month.

scholarly journals Host Peptidic Hormones Affecting Bacterial Biofilm Formation and Virulence

2018 ◽  
Vol 11 (3) ◽  
pp. 227-241 ◽  
Author(s):  
Olivier Lesouhaitier ◽  
Thomas Clamens ◽  
Thibaut Rosay ◽  
Florie Desriac ◽  
Mélissande Louis ◽  
...  
Keyword(s):  
Biofilm Formation ◽  
Bacterial Biofilm ◽  
Critical Problem ◽  
Resistant Variant ◽  
Bacterial Physiology ◽  
Gram Positive Bacteria ◽  
Biofilm Production ◽  
The Impact ◽  
Original Approach ◽  
Antibacterial Potential

Bacterial biofilms constitute a critical problem in hospitals, especially in resuscitation units or for immunocompromised patients, since bacteria embedded in their own matrix are not only protected against antibiotics but also develop resistant variant strains. In the last decade, an original approach to prevent biofilm formation has consisted of studying the antibacterial potential of host communication molecules. Thus, some of these compounds have been identified for their ability to modify the biofilm formation of both Gram-negative and Gram-positive bacteria. In addition to their effect on biofilm production, a detailed study of the mechanism of action of these human hormones on bacterial physiology has allowed the identification of new bacterial pathways involved in biofilm formation. In this review, we focus on the impact of neuropeptidic hormones on bacteria, address some future therapeutic issues, and provide a new view of inter-kingdom communication.

scholarly journals Usnic Acid, a Natural Antimicrobial Agent Able To Inhibit Bacterial Biofilm Formation on Polymer Surfaces

2004 ◽  
Vol 48 (11) ◽  
pp. 4360-4365 ◽  
Author(s):  
I. Francolini ◽  
P. Norris ◽  
A. Piozzi ◽  
G. Donelli ◽  
P. Stoodley
Keyword(s):  
Biofilm Formation ◽  
Usnic Acid ◽  
Modern Medicine ◽  
The Body ◽  
Bacterial Biofilm ◽  
Polymer Surfaces ◽  
Gram Positive Bacteria ◽  
The Status ◽  
Bacteria And Fungi ◽  
Systemic Infections

ABSTRACT In modern medicine, artificial devices are used for repair or replacement of damaged parts of the body, delivery of drugs, and monitoring the status of critically ill patients. However, artificial surfaces are often susceptible to colonization by bacteria and fungi. Once microorganisms have adhered to the surface, they can form biofilms, resulting in highly resistant local or systemic infections. At this time, the evidence suggests that (+)-usnic acid, a secondary lichen metabolite, possesses antimicrobial activity against a number of planktonic gram-positive bacteria, including Staphylococcus aureus, Enterococcus faecalis, and Enterococcus faecium. Since lichens are surface-attached communities that produce antibiotics, including usnic acid, to protect themselves from colonization by other bacteria, we hypothesized that the mode of action of usnic acid may be utilized in the control of medical biofilms. We loaded (+)-usnic acid into modified polyurethane and quantitatively assessed the capacity of (+)-usnic acid to control biofilm formation by either S. aureus or Pseudomonas aeruginosa under laminar flow conditions by using image analysis. (+)-Usnic acid-loaded polymers did not inhibit the initial attachment of S. aureus cells, but killing the attached cells resulted in the inhibition of biofilm. Interestingly, although P. aeruginosa biofilms did form on the surface of (+)-usnic acid-loaded polymer, the morphology of the biofilm was altered, possibly indicating that (+)-usnic acid interfered with signaling pathways.

scholarly journals Tissue Plasminogen Activator Coating on Implant Surfaces Reduces Staphylococcus aureus Biofilm Formation

2015 ◽  
Vol 82 (1) ◽  
pp. 394-401 ◽  
Author(s):  
Jakub Kwiecinski ◽  
Manli Na ◽  
Anders Jarneborn ◽  
Gunnar Jacobsson ◽  
Marijke Peetermans ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Plasminogen Activator ◽  
Tissue Plasminogen Activator ◽  
Medical Devices ◽  
Biofilm Formation ◽  
Bacterial Biofilm ◽  
Content Type ◽  
Tissue Plasminogen

ABSTRACTStaphylococcus aureusbiofilm infections of indwelling medical devices are a major medical challenge because of their high prevalence and antibiotic resistance. As fibrin plays an important role inS. aureusbiofilm formation, we hypothesize that coating of the implant surface with fibrinolytic agents can be used as a new method of antibiofilm prophylaxis. The effect of tissue plasminogen activator (tPA) coating onS. aureusbiofilm formation was tested within vitromicroplate biofilm assays and anin vivomouse model of biofilm infection. tPA coating efficiently inhibited biofilm formation by variousS. aureusstrains. The effect was dependent on plasminogen activation by tPA, leading to subsequent local fibrin cleavage. A tPA coating on implant surfaces prevented both early adhesion and later biomass accumulation. Furthermore, tPA coating increased the susceptibility of biofilm infections to antibiotics.In vivo, significantly fewer bacteria were detected on the surfaces of implants coated with tPA than on control implants from mice treated with cloxacillin. Fibrinolytic coatings (e.g., with tPA) reduceS. aureusbiofilm formation bothin vitroandin vivo, suggesting a novel way to prevent bacterial biofilm infections of indwelling medical devices.

scholarly journals Bacterial Biofilm Growth on 3D-Printed Materials

2021 ◽  
Vol 12 ◽  
Author(s):  
Donald C. Hall ◽  
Phillip Palmer ◽  
Hai-Feng Ji ◽  
Garth D. Ehrlich ◽  
Jarosław E. Król
Keyword(s):  
Medical Devices ◽  
Biofilm Formation ◽  
Antimicrobial Agents ◽  
Bacterial Attachment ◽  
Bacterial Biofilm ◽  
Chronic Infections ◽  
Biofilm Growth ◽  
Wide Range ◽  
3D Printed ◽  
Printed Materials

Recent advances in 3D printing have led to a rise in the use of 3D printed materials in prosthetics and external medical devices. These devices, while inexpensive, have not been adequately studied for their ability to resist biofouling and biofilm buildup. Bacterial biofilms are a major cause of biofouling in the medical field and, therefore, hospital-acquired, and medical device infections. These surface-attached bacteria are highly recalcitrant to conventional antimicrobial agents and result in chronic infections. During the COVID-19 pandemic, the U.S. Food and Drug Administration and medical officials have considered 3D printed medical devices as alternatives to conventional devices, due to manufacturing shortages. This abundant use of 3D printed devices in the medical fields warrants studies to assess the ability of different microorganisms to attach and colonize to such surfaces. In this study, we describe methods to determine bacterial biofouling and biofilm formation on 3D printed materials. We explored the biofilm-forming ability of multiple opportunistic pathogens commonly found on the human body including Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus to colonize eight commonly used polylactic acid (PLA) polymers. Biofilm quantification, surface topography, digital optical microscopy, and 3D projections were employed to better understand the bacterial attachment to 3D printed surfaces. We found that biofilm formation depends on surface structure, hydrophobicity, and that there was a wide range of antimicrobial properties among the tested polymers. We compared our tested materials with commercially available antimicrobial PLA polymers.

Resistance to Long-Term Bacterial Biofilm Formation Based on Hydrolysis-Induced Zwitterion Material with Biodegradable and Self-Healing Properties

Langmuir ◽  
2020 ◽  
Vol 36 (12) ◽  
pp. 3251-3259 ◽  
Author(s):  
Jun Ma ◽  
Weifeng Lin ◽  
Liangbo Xu ◽  
Sihang Liu ◽  
Weili Xue ◽  
...  
Keyword(s):  
Biofilm Formation ◽  
Bacterial Biofilm ◽  
Self Healing

scholarly journals Analysis of the bacterial biofilm formation in different models of the in vitro culture

2021 ◽  
Vol 19 (1) ◽  
pp. 40-45
Author(s):  
Agnieszka Bogut ◽  
◽  
Agnieszka Magryś ◽  
Keyword(s):  
Biofilm Formation ◽  
Culture Media ◽  
Microtiter Plate ◽  
Bacterial Biofilm ◽  
Atmospheric Conditions ◽  
Experimental Conditions ◽  
Microtiter Plate Assay ◽  
Biofilm Production ◽  
Strain Type

Introduction. Microtiter plate assay (MPA) remains one of workhorses of in vitro biofilm research but it requires optimization of experimental conditions to fulfill the biofilm formation requirements of different bacterial pathogens. Aim. The aim was to determine the effect of TSB and RPMI1640 culture media and selected culture variables (O2 vs. 5% CO2, extended incubation time) on the biofilm production by bacteria commonly involved in biofilm-related infections: Enterococcus faecalis (EF), Escherichia coli (EC), Staphylococcus aureus (SA), Pseudomonas aeruginosa (PA), Klebsiella pneumoniae (KP). Material and methods. The investigation was performed using the MPA with crystal violet. Results. Statistically significant (p<0.05) increase in biofilm production between 24h and 72h time points was observed for EF (TSB o2, RPMIo2 and RPMIco2), EC (TSBo2), SA (TSBo2, TSBco2), KP (TSBo2, TSBco2), PA (RPMIco2, TSBco2). The TSB caused a significantly greater stimulation of biofilm production compared to RPM1640. It outcompeted RPMI1640 irrespective of the atmospheric conditions for SA and KP and under aerobic conditions for EF. Conclusion. Although the TSB provided the most optimal conditions for biofilm production, the process was influenced by the strain type, atmospheric conditions and period of cultivation which limits the ability to design a single universal model of the in vitro biofilm investigation.

scholarly journals The BioFilm Ring Test: a Rapid Method for Routine Analysis of Pseudomonas aeruginosa Biofilm Formation Kinetics

2015 ◽  
Vol 54 (3) ◽  
pp. 657-661 ◽  
Author(s):  
Elodie Olivares ◽  
Stéphanie Badel-Berchoux ◽  
Christian Provot ◽  
Benoît Jaulhac ◽  
Gilles Prévost ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Culture Media ◽  
Bacterial Biofilm ◽  
Ring Test ◽  
Bacterial Suspension ◽  
Bacterial Strains ◽  
Content Type ◽  
Require Time ◽  
Formation Kinetics

Currently, few techniques are available for the evaluation of bacterial biofilm adhesion. These detection tools generally require time for culture and/or arduous handling steps. In this work, the BioFilm Ring Test (BRT), a new technology, was used to estimate the biofilm formation kinetics of 25 strains ofPseudomonas aeruginosa, isolated from the sputum of cystic fibrosis (CF) patients. The principle of the new assay is based on the mobility measurement of magnetic microbeads mixed with a bacterial suspension in a polystyrene microplate. If free to move under the magnetic action, particles gather to a visible central spot in the well bottom. Therefore, the absence of spot formation in the plate reflects the bead immobilization by a biofilm in formation. The BRT device allowed us to classify the bacterial strains into three general adhesion profiles. Group 1 consists of bacteria, which are able to form a solid biofilm in <2 h. Group 2 comprises the strains that progressively set up a biofilm during 24 h. Lastly, group 3 includes the strains that stay in a planktonic form. The grouping of our strains did not differ according to culture conditions, i.e., the use of different sets of beads or culture media. The BRT is shown to be an informative tool for the characterization of biofilm-forming bacteria. Various application perspectives may be investigated for this device, such as the addition of antibiotics to the bacterial suspension to select which would have the ability to inhibit the biofilm formation.

scholarly journals Isolation of the Bacteriophages Inhibiting the Expression of the Genes Involved in Biofilm Formation by Streptococcus mutans

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Zahra Rajabi ◽  
Rouha Kermanshahi ◽  
Mohammad Mehdi Soltan Dallal ◽  
Yousef Erfani ◽  
Reza Ranjbar
Keyword(s):  
Dental Caries ◽  
Streptococcus Mutans ◽  
Biofilm Formation ◽  
Culture Media ◽  
Bacterial Biofilm ◽  
Tooth Decay ◽  
Urban Sewage ◽  
Molecular Tests ◽  
Transmission Electron ◽  
Biofilm Development

Background: The potential of Streptococcus mutans for biofilm formation makes it one of the main organisms causing dental caries. Various preventive strategies have been applied to reduce tooth decay. Objectives: In the current study, we aimed to isolate S. mutans bacteriophages from sewage and to investigate their effects on the expression of the genes involved in bacterial biofilm formation in dental caries. Methods: Eighty-one dental plaque samples were collected. Then to isolate and identify S. mutans, bacterial culture media and molecular tests were used. Moreover, the biofilm formation capability of the isolated S. mutans was determined. Also, lytic bacteriophages were isolated from raw urban sewage, and phage morphology was determined by transmission electron microscopy (TEM). Real-time PCR was used to assess the effects of the isolated bacteriophages on the expression of the genes involved in biofilm formation. Results: Overall, 32 (39.5%) samples were positive for the presence of S. mutans. All of the isolates contained the gtfD gene. The frequencies of other genes were as follows: gtfB (17, 53.12%), gtfC (19, 53.37%), SpaP (13, 40.62%), and luxS (23, 17.87%). The isolated S. mutans bacteria presented different ranges of biofilm formation ability. Based on TEM results, two sewage-isolated bacteriophages, belonging to Siphoviridae and Tectiviridae families, were able to prevent biofilm formation up to 97%. Conclusions: Our findings indicate that phage therapy can be an optional way for controlling biofilm development and reducing the colonization of teeth surface by S. mutans.

scholarly journals Controlling biofilm formation with nitroxide functional surfaces

2019 ◽  
Vol 10 (31) ◽  
pp. 4252-4258 ◽  
Author(s):  
Hendrik Woehlk ◽  
Michael J. Trimble ◽  
Sarah C. Mansour ◽  
Daniel Pletzer ◽  
Vanessa Trouillet ◽  
...  
Keyword(s):  
Medical Devices ◽  
Biofilm Formation ◽  
Polymer Coatings ◽  
Bacterial Biofilm ◽  
Antibiofilm Activity ◽  
Functional Polymer ◽  
Functional Surfaces

Nitroxide functional polymer coatings with inherent antibiofilm activity are introduced as an avenue to combat bacterial biofilm contamination of medical devices.

Sign in / Sign up

Export Citation Format

Share Document