scholarly journals Environment-Friendly and Two-Component Method for Fabrication of Highly Hydrophobic Wood Using Poly(methylhydrogen)siloxane

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 124
Author(s):  
Jie Gao ◽  
Wensheng Lin ◽  
Shumin Lin ◽  
Xinxiang Zhang ◽  
Wenbin Yang ◽  
...  
Keyword(s):  
Cross Sections ◽  
Contact Angles ◽  
Practical Application ◽  
Water Contact ◽  
Water Separation ◽  
Environment Friendly ◽  
Two Component ◽  
Oil Water Separation ◽  
Oil Water ◽  
Highly Hydrophobic

Practical application of wood remains a great challenge because of its highly hydrophilic property. In this work, highly hydrophobic wood was produced using an environment-friendly and two-component package method. Poly(methylhydrogen)siloxane (PMHS) and inhibitor played the key role in the hydrophobicity of wood and the assembly process. The two-component package mechanism was discussed in detail. As a result, the water contact angles of the modified wood surface for the radial and cross sections were 139.5° and 152.9°, respectively, which provided the resultant wood high hydrophobicity and dimensional stability. The two-component package method afforded the wood good anti-fouling property and UV-resistance. In addition, the two-component package method could also be applied in functionalization of filter paper for oil/water separation.

scholarly journals Superhydrophobic Materials With Good Oil/Water Separation And Self-Cleaning Prepared Through A Environment-Friendly And Two-Component Method

2021 ◽  
Author(s):  
Wensheng Lin ◽  
Mengting Cao ◽  
Kehinde Olonisakin ◽  
Ran Li ◽  
Xinxiang Zhang ◽  
...  
Keyword(s):  
Large Scale ◽  
Substrate Surface ◽  
Superhydrophobic Surfaces ◽  
Water Separation ◽  
Environment Friendly ◽  
Two Component ◽  
Oil Water Separation ◽  
Oil Water ◽  
Self Cleaning ◽  
Coated Surfaces

Abstract A novel, versatile, environment-friendly, and economical method was developed to fabricate functional superhydrophobic surfaces on various substrates, including wood, bamboo, cotton, filter paper, sponge, glass, textile, and copper. This method involves synthesizing a two-component modifier solution consisting of SiO2 nanoparticles combination with poly(methylhydrogen)siloxane (PMHS) modification. The superhydrophobicity of the coated surfaces was created by PMHS combined with SiO2 nanoparticles to construct a rough hierarchical structure on the substrate surface. As a result, all superhydrophobic surfaces were maintained under an indoor environment and relative humidity (RH) of 50% for 30 days. Furthermore, the superhydrophobic surfaces were also maintained at environmental conditions of minus 20℃ for 24 hours. It was also confirmed that these surfaces exhibited excellent self-cleaning, oil/water separation, and elimination of underwater oil properties. The method for fabricating superhydrophobic materials proposed in this study will have great application potential in preparing large-scale superhydrophobic surfaces for use in ancient building protection.

scholarly journals Effects of Surface Microstructures on Superhydrophobic Properties and Oil-Water Separation Efficiency

Coatings ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 69 ◽  
Author(s):  
Yangyang Chen ◽  
Shengke Yang ◽  
Qian Zhang ◽  
Dan Zhang ◽  
Chunyan Yang ◽  
...  
Keyword(s):  
Separation Efficiency ◽  
Contact Angles ◽  
Water Contact ◽  
Water Separation ◽  
Cone Morphology ◽  
Truncated Cone ◽  
Oil Water Separation ◽  
Receding Contact ◽  
Oil Water ◽  
Pressure Resistance

In order to explore the effects of microstructures of membranes on superhydrophobic properties, it is critical, though, challenging, to study microstructures with different morphologies. In this work, a combination of chemical etching and oxidation was used and some copper meshes were selected for grinding. Two superhydrophobic morphologies could be successfully prepared for oil-water separation: a parabolic morphology and a truncated cone morphology. The surface morphology, chemical composition, and wettability were characterized. The results indicated that the water contact angle and the advancing and receding contact angles of the parabolic morphology were 153.6°, 154.6 ± 1.1°, and 151.5 ± 1.8°, respectively. The water contact angle and the advancing and receding contact angles of the truncated cone morphology were 121.8°, 122.7 ± 1.6°, and 119.6 ± 2.7°, respectively. The separation efficiency of the parabolic morphology for different oil-water mixtures was 97.5%, 97.2%, and 91%. The separation efficiency of the truncated cone morphology was 93.2%, 92%, and 89%. In addition, the values of the deepest heights of pressure resistance of the parabolic and truncated cone morphologies were 21.4 cm of water and 19.6 cm of water, respectively. This shows that the parabolic morphology had good separation efficiency, pressure resistance, and superhydrophobic ability compared with the truncated cone morphology. It illustrates that microstructure is one of the main factors affecting superhydrophobic properties.

scholarly journals Complex Aerogels Generated from Nano-Polysaccharides and Its Derivatives for Oil–Water Separation

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1593 ◽  
Author(s):  
Hajo Yagoub ◽  
Liping Zhu ◽  
Mahmoud H. M. A. Shibraen ◽  
Ali A. Altam ◽  
Dafaalla M. D. Babiker ◽  
...  
Keyword(s):  
Guar Gum ◽  
Corn Oil ◽  
Cellulose Nanofibers ◽  
Aqueous Media ◽  
Three Dimensional ◽  
Absorption Capacity ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

The complex aerogel generated from nano-polysaccharides, chitin nanocrystals (ChiNC) and TEMPO-oxidized cellulose nanofibers (TCNF), and its derivative cationic guar gum (CGG) is successfully prepared via a facile freeze-drying method with glutaraldehyde (GA) as cross-linkers. The complexation of ChiNC, TCNF, and CGG is shown to be helpful in creating a porous structure in the three-dimensional aerogel, which creates within the aerogel with large pore volume and excellent compressive properties. The ChiNC/TCNF/CGG aerogel is then modified with methyltrichlorosilane (MTCS) to obtain superhydrophobicity/superoleophilicity and used for oil–water separation. The successful modification is demonstrated through FTIR, XPS, and surface wettability studies. A water contact angle of 155° on the aerogel surface and 150° on the surface of the inside part of aerogel are obtained for the MTCS-modified ChiNC/TCNF/CGG aerogel, resulting in its effective absorption of corn oil and organic solvents (toluene, n-hexane, and trichloromethane) from both beneath and at the surface of water with excellent absorption capacity (i.e., 21.9 g/g for trichloromethane). More importantly, the modified aerogel can be used to continuously separate oil from water with the assistance of a vacuum setup and maintains a high absorption capacity after being used for 10 cycles. The as-prepared superhydrophobic/superoleophilic ChiNC/TCNF/CGG aerogel can be used as a promising absorbent material for the removal of oil from aqueous media.

Fabrication of hydrophobic NiFe2O4@poly(DVB-LMA) sponge via Pickering emulsion template method for oil/water separation

Soft Matter ◽  
2021 ◽  
Author(s):  
Caimei Zhao ◽  
Lei Chen ◽  
Chuanming Yu ◽  
Binghua Hu ◽  
Haoxuan Huang ◽  
...  
Keyword(s):  
Oil Spills ◽  
Low Cost ◽  
Pickering Emulsion ◽  
Template Method ◽  
Water Separation ◽  
Environment Friendly ◽  
Oil Water Separation ◽  
Oil Water ◽  
Cost Efficient

Super-hydrophobic porous absorbent is a convenient, low-cost, efficient and environment-friendly material in the treatment of oil spills. In this work, a simple Pickering emulsion template method was employed to fabricate...

Heterogeneous wettable cotton based superhydrophobic Janus biofabric engineered with PLA/functionalized-organoclay microfibers for efficient oil–water separation

2018 ◽  
Vol 6 (17) ◽  
pp. 7457-7479 ◽  
Author(s):  
Prakash M. Gore ◽  
Balasubramanian Kandasubramanian
Keyword(s):  
Global Warming ◽  
Organic Solvents ◽  
Functional Materials ◽  
Heavy Oils ◽  
Water Separation ◽  
Environment Friendly ◽  
Oil Water Separation ◽  
Oil Water

The recent requirement for superwettable materials for efficient absorption of heavy oils and waste organic solvents, and the concern for the global warming has led to the advancement of environment friendly functional materials.

Design and fabrication of polydopamine based superhydrophobic fabrics for efficient oil-water separation

Soft Matter ◽  
2021 ◽  
Author(s):  
Jixi Zhang ◽  
Ligui Zhang ◽  
Xiao Gong
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Sol Gel ◽  
High Water ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water ◽  
Fabric Surface

In this work, we prepare a PDMS-SiO2-PDA@fabric with high water contact angle (WCA=155o). Combining dopamine self-polymerization and sol-gel method, SiO2 is in situ grown on a PDA-modified fabric surface to...

Flexible, durable and magnetic nanofibrous membrane with pH-switchable wettability for efficient on-demand oil/water separation

2019 ◽  
Vol 6 (12) ◽  
pp. 3699-3711 ◽  
Author(s):  
Wenjing Ma ◽  
Mengjie Zhang ◽  
Yuansheng Li ◽  
Mengmeng Kang ◽  
Chaobo Huang ◽  
...  
Keyword(s):  
Nanofibrous Membrane ◽  
Water Separation ◽  
Environment Friendly ◽  
On Demand ◽  
Oil Water Separation ◽  
Oil Water

An intelligent, flexible, magnetic and robust nanofibrous membrane with pH-switchable wettability was prepared through environment-friendly methods for on-demand oil/water separation.

scholarly journals Preparation and Characterization of Tris(trimethylsiloxy)silyl Modified Polyurethane Acrylates and Their Application in Textile Treatment

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1629
Author(s):  
Xuecheng Yu ◽  
Ying Xiong ◽  
Zhen Li ◽  
Hongding Tang
Keyword(s):  
Microphase Separation ◽  
Triethylene Glycol ◽  
Absorption Capacity ◽  
Attenuated Total Reflection ◽  
Water Mixture ◽  
Water Contact ◽  
Water Separation ◽  
Cotton Textiles ◽  
Oil Water Separation ◽  
Oil Water

Three series of silicone modified polyurethane acrylate (SPUA) prepolymers were prepared from dicyclohexylmethane-4, 4′-diisocyanate (HMDI), PPG1000, triethylene glycol (TEG), 2-hydroxyethyl acrylate (HEA), and multi-hydroxyalkyl silicone (MI-III) with tris(trimethylsiloxy)silyl propyl side groups. Their structures were confirmed by 1H NMR, 13C NMR, and Fourier transformed infrared (FTIR) analysis, and SPUA films were obtained by UV curing. The properties of films were investigated by attenuated total reflection (ATR)-FTIR, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), water contact angle (WCA), thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), water and hexane resistance, and tensile testing. The results showed that the structures and dosages of MI-III could influence the polymerization properties, surface properties, water and n-hexane resistance, and thermal and tensile properties of SPUA. For instance, the surface aggregation of tris(trimethylsiloxy)silyl propyl groups (even ~2.5 wt%) could endow SPUA films with less microphase separation, good hydrophobicity, lipophilicity, thermal stability, and mechanical properties. Interestingly, obvious regular winkles appeared on the surfaces of SPUAIII films, which are characterized by relatively high WCA values. However, relatively smooth were observed on the surfaces of SPUAIII films, which also exhibit lower water absorption ratio values. Furthermore, the ordinary cotton textiles would be transformed into hydrophobic and oleophilic textiles after treating with SPUA simply, and they were used in the oil/water separation study. Among them, consistent with water and hexane resistance analysis of SPUA films, SPUAII treated cotton textiles are characterized by relatively small liquid absorption capacity (LAC) values. Thus, phenyl groups and side-chain tris(trimethylsiloxy)silyl propyl groups are helpful to improve the hydrophobicity and lipophilicity of SPUA films. SPUAII-5 (even with 5 wt% MII) treated cotton textiles could efficiently separate the oil/water mixture, such as n-hexane, cyclohexane, or methylbenzene with water. Thus, this material has great potential in the application of hydrophobic treatment, oil/water separation, and industrial sewage emissions, among others.

Sign in / Sign up

Export Citation Format

Share Document