scholarly journals Photocuring Hyaluronic Acid/Silk Fibroin Hydrogel Containing Curcumin Loaded CHITOSAN Nanoparticles for the Treatment of MG-63 Cells and ME3T3-E1 Cells

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2302
Author(s):  
Qingwen Yu ◽  
Zhiyuan Meng ◽  
Yichao Liu ◽  
Zehao Li ◽  
Xing Sun ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Bone Regeneration ◽  
Water Uptake ◽  
Silk Fibroin ◽  
Bone Repair ◽  
Ph Value ◽  
Chitosan Nanoparticles ◽  
Vitro Assay ◽  
Long Term Treatment

After an osteosarcoma excision, recurrence and bone defects are significant challenges for clinicians. In this study, the curcumin (Cur) loaded chitosan (CS) nanoparticles (CCNP) encapsulated silk fibroin (SF)/hyaluronic acid esterified by methacrylate (HAMA) (CCNPs-SF/HAMA) hydrogel for the osteosarcoma therapy and bone regeneration was developed by photocuring and ethanol treatment. The micro or nanofibers networks were observed in the CCNPs-SF/HAMA hydrogel. The FTIR results demonstrated that alcohol vapor treatment caused an increase in β-sheets of SF, resulting in the high compression stress and Young’s modulus of CCNPs-SF/HAMA hydrogel. According to the water uptake analysis, SF caused a slight decrease in water uptake of CCNPs-SF/HAMA hydrogel while CCNPs could enhance the water uptake of it. The swelling kinetic results showed that both the CCNPs and the SF increased the swelling ratio of CCNPs-SF/HAMA hydrogel. The accumulative release profile of CCNPs-SF/HAMA hydrogel showed that the release of Cur from CCNPs-SF/HAMA hydrogel was accelerated when pH value was decreased from 7.4 to 5.5. Besides, compared with CCNPs, the CCNPs-SF/HAMA hydrogel had a more sustainable drug release, which was beneficial for the long-term treatment of osteosarcoma. In vitro assay results indicated that CCNPs-SF/HAMA hydrogel with equivalent Cur concentration of 150 μg/mL possessed both the effect of anti-cancer and promoting the proliferation of osteoblasts. These results suggest that CCNPs-SF/HAMA hydrogel with superior physical properties and the bifunctional osteosarcoma therapy and bone repair may be an excellent candidate for local cancer therapy and bone regeneration.

scholarly journals Human Adipose-Derived Mesenchymal Stem Cells-Incorporated Silk Fibroin as a Potential Bio-Scaffold in Guiding Bone Regeneration

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 853 ◽  
Author(s):  
Dewi Sartika ◽  
Chih-Hsin Wang ◽  
Ding-Han Wang ◽  
Juin-Hong Cherng ◽  
Shu-Jen Chang ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Bone Regeneration ◽  
Osteogenic Differentiation ◽  
Silk Fibroin ◽  
Bone Repair ◽  
Matrix Deposition ◽  
Calvarial Defects

Recently, stem cell-based bone tissue engineering (BTE) has been recognized as a preferable and clinically significant strategy for bone repair. In this study, a pure 3D silk fibroin (SF) scaffold was fabricated as a BTE material using a lyophilization method. We aimed to investigate the efficacy of the SF scaffold with and without seeded human adipose-derived mesenchymal stem cells (hASCs) in facilitating bone regeneration. The effectiveness of the SF-hASCs scaffold was evaluated based on physical characterization, biocompatibility, osteogenic differentiation in vitro, and bone regeneration in critical rat calvarial defects in vivo. The SF scaffold demonstrated superior biocompatibility and significantly promoted osteogenic differentiation of hASCs in vitro. At six and twelve weeks postimplantation, micro-CT showed no statistical difference in new bone formation amongst all groups. However, histological staining results revealed that the SF-hASCs scaffold exhibited a better bone extracellular matrix deposition in the defect regions compared to other groups. Immunohistochemical staining confirmed this result; expression of osteoblast-related genes (BMP-2, COL1a1, and OCN) with the SF-hASCs scaffold treatment was remarkably positive, indicating their ability to achieve effective bone remodeling. Thus, these findings demonstrate that SF can serve as a potential carrier for stem cells, to be used as an osteoconductive bioscaffold for BTE applications.

scholarly journals Zn-Containing Membranes for Guided Bone Regeneration in Dentistry

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1797
Author(s):  
Manuel Toledano ◽  
Marta Vallecillo-Rivas ◽  
María T. Osorio ◽  
Esther Muñoz-Soto ◽  
Manuel Toledano-Osorio ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bone Regeneration ◽  
Bone Healing ◽  
Bone Repair ◽  
Complex Modulus ◽  
Bacterial Colonization ◽  
Guided Bone Regeneration ◽  
M2 Macrophage

Barrier membranes are employed in guided bone regeneration (GBR) to facilitate bone in-growth. A bioactive and biomimetic Zn-doped membrane with the ability to participate in bone healing and regeneration is necessary. The aim of the present study is to state the effect of doping the membranes for GBR with zinc compounds in the improvement of bone regeneration. A literature search was conducted using electronic databases, such as PubMed, MEDLINE, DIMDI, Embase, Scopus and Web of Science. A narrative exploratory review was undertaken, focusing on the antibacterial effects, physicochemical and biological properties of Zn-loaded membranes. Bioactivity, bone formation and cytotoxicity were analyzed. Microstructure and mechanical properties of these membranes were also determined. Zn-doped membranes have inhibited in vivo and in vitro bacterial colonization. Zn-alloy and Zn-doped membranes attained good biocompatibility and were found to be non-toxic to cells. The Zn-doped matrices showed feasible mechanical properties, such as flexibility, strength, complex modulus and tan delta. Zn incorporation in polymeric membranes provided the highest regenerative efficiency for bone healing in experimental animals, potentiating osteogenesis, angiogenesis, biological activity and a balanced remodeling. Zn-loaded membranes doped with SiO2 nanoparticles have performed as bioactive modulators provoking an M2 macrophage increase and are a potential biomaterial for promoting bone repair. Zn-doped membranes have promoted pro-healing phenotypes.

scholarly journals Biomimetic and osteogenic 3D silk fibroin composite scaffolds with nano MgO and mineralized hydroxyapatite for bone regeneration

2020 ◽  
Vol 11 ◽  
pp. 204173142096779
Author(s):  
Ziquan Wu ◽  
Zhulong Meng ◽  
Qianjin Wu ◽  
Delu Zeng ◽  
Zhengdong Guo ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Bone Tissue ◽  
Silk Fibroin ◽  
Bone Repair ◽  
Composite Scaffold ◽  
Bone Tissue Regeneration ◽  
Bone Mesenchymal Stem Cells ◽  
Differentiation Potential ◽  
Composite Effect ◽  
Sd Rat

Artificial bioactive materials have received increasing attention worldwide in clinical orthopedics to repair bone defects that are caused by trauma, infections or tumors, especially dedicated to the multifunctional composite effect of materials. In this study, a weakly alkaline, biomimetic and osteogenic, three-dimensional composite scaffold (3DS) with hydroxyapatite (HAp) and nano magnesium oxide (MgO) embedded in fiber (F) of silkworm cocoon and silk fibroin (SF) is evaluated comprehensively for its bone repair potential in vivo and in vitro experiments, particularly focusing on the combined effect between HAp and MgO. Magnesium ions (Mg2+) has long been proven to promote bone tissue regeneration, and HAp is provided with osteoconductive properties. Interestingly, the weak alkaline microenvironment from MgO may also be crucial to promote Sprague-Dawley (SD) rat bone mesenchymal stem cells (BMSCs) proliferation, osteogenic differentiation and alkaline phosphatase (ALP) activities. This SF/F/HAp/nano MgO (SFFHM) 3DS with superior biocompatibility and biodegradability has better mechanical properties, BMSCs proliferation ability, osteogenic activity and differentiation potential compared with the scaffolds adding HAp or MgO alone or neither. Similarly, corresponding meaningful results are also demonstrated in a model of distal lateral femoral defect in SD rat. Therefore, we provide a promising 3D composite scaffold for promoting bone regeneration applications in bone tissue engineering.

scholarly journals Dual-Drug-Loaded Silk Fibroin/PLGA Scaffolds for Potential Bone Regeneration Applications

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Jihang Yao ◽  
Yilong Wang ◽  
Wendi Ma ◽  
Wenying Dong ◽  
Mei Zhang ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Bone Regeneration ◽  
Silk Fibroin ◽  
Bone Morphogenetic Protein 2 ◽  
Burst Release ◽  
Nanofiber Membrane ◽  
Differentiation Potential ◽  
Dual Drug

Developing scaffold materials with excellent biocompatibility, mechanical properties, and controlled drug release properties is vital to tissue engineering. In this study, we fabricated silk fibroin (SF)/poly(lactide-co-glycolide) (PLGA) nanofiber scaffolds containing recombinant human bone morphogenetic protein 2 (rhBMP2) and dexamethasone (DXM) via coaxial electrospinning, which were used in in vitro bone formation with rat bone marrow mesenchymal stem cells (rBMSCs). An in vitro drug release study was adopted to evaluate the sustained release potential of the core-shell structured nanofibers. Furthermore, we detected the potential of the SF/PLGA nanofiber membrane in vitro. In vitro studies showed that rhBMP2 still remained active on the nanofiber membrane. In addition, the dual-drug-loaded nanofiber membrane showed an early burst release of DXM and late sustained release of rhBMP2. rhBMP2 and DXM exhibited strong osteogenic differentiation potential when they acted on rBMSCs. Therefore, the SF/PLGA nanofiber membrane loaded with rhBMP2 and DXM has great potential for the enhancement of bone regeneration.

Porous Silk Fibroin Membrane as a Potential Scaffold for Bone Regeneration

2008 ◽  
Vol 396-398 ◽  
pp. 187-190 ◽  
Author(s):  
Raquel Farias Weska ◽  
Grínia M. Nogueira ◽  
Wellington C. Vieira ◽  
Marisa Masumi Beppu
Keyword(s):  
Bone Regeneration ◽  
Silk Fibroin ◽  
Biomedical Application ◽  
Early Stage ◽  
Bone Matrix ◽  
Octacalcium Phosphate ◽  
Ion Concentration ◽  
Phosphate Deposits

The requirements for scaffolds for bone tissue engineering include appropriate chemistry, morphology and structure to promote cell adhesion and synthesis of new bone matrix. Silk fibroin (SF) represents an important biomaterial for biomedical application, due to its suitable mechanical properties, biodegradability, biocompatibility, and versatility in processing. Our group has developed a new method to obtain a porous SF membrane, and the study of its potential for use as a scaffold for bone regeneration was the aim of this study. Porous membranes were obtained from SF solution, through the compression of a material generated by phase separation. For in vitro calcification experiments, porous SF membrane samples were immersed in SBF at pH 7.4 placed in polyethylene flasks. The experiments were carried out for seven days, at 36.5±0.5 °C. After 48 and 96h, the solutions were changed for fresh SBF with the ion concentration 1.5-fold higher than that of the standard one, to accelerate the calcification process. The characterization of morphology and composition of samples was performed by using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), respectively. The SEM micrographs indicated that the porous SF membranes presented calcium phosphate deposits after undergoing in vitro calcification. These results were confirmed by EDS spectra, which showed a stoichiometric molar Ca/P ratio ranging from 1.27 to 1.52. This fact may suggest that calcification deposits consisted of mixtures of HAP (Ca/P ratio = 1.67) and transient HAP precursor phases, such as octacalcium phosphate (Ca/P = 1.33) and dicalcium phosphate dehydrate (Ca/P = 1), indicating early stage mineralization. The porous silk fibroin membrane analysed in the current study is a promising material to be used as scaffolds for bone regeneration.

Silk Fibroin/Hyaluronic Acid Blend Film with Good Water Stability and Cytocompatibility

2013 ◽  
Vol 377 ◽  
pp. 209-214
Author(s):  
Ling Shuang Wang ◽  
Shu Qin Yan ◽  
Ming Zhong Li
Keyword(s):  
Cell Proliferation ◽  
Hyaluronic Acid ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Water Resistance ◽  
High Water ◽  
Casting Method ◽  
Blend Ratio ◽  
Blend Films

Stimulating cell proliferation is a challenge in the field of silk fibroin-based biomaterials. In this study, silk fibroin/hyaluronic acid blend films were prepared by a casting method using carbodiimide as a cross-linking agent. Carbodiimide induced silk fibroin to form Silk I crystal structure which was not affected by the presence of hyaluronic acid. The films showed high water resistance. In vitro, the performance of these films was assessed by seeding L929 cells. The results indicated that the silk fibroin/hyaluronic acid blend films with the blend ratio of 80/20 and 60/40 promoted cell proliferation compared with the pure silk fibroin or hyaluronic acid film. These results suggest that silk fibroin/hyaluronic acid blend films are water stable and cytocompatible materials which are expected to be useful in biomedical applications.

Dual growth factor loaded nonmulberry silk fibroin/carbon nanofiber composite 3D scaffolds for in vitro and in vivo bone regeneration

Biomaterials ◽  
2017 ◽  
Vol 136 ◽  
pp. 67-85 ◽  
Author(s):  
Deboki Naskar ◽  
Ananta K. Ghosh ◽  
Mahitosh Mandal ◽  
Piyali Das ◽  
Samit K. Nandi ◽  
...  
Keyword(s):  
Growth Factor ◽  
Bone Regeneration ◽  
Silk Fibroin ◽  
Carbon Nanofiber ◽  
Nanofiber Composite ◽  
3D Scaffolds

scholarly journals Cellularizing hydrogel-based scaffolds to repair bone tissue: How to create a physiologically relevant micro-environment?

2017 ◽  
Vol 8 ◽  
pp. 204173141771207 ◽  
Author(s):  
Mathieu Maisani ◽  
Daniele Pezzoli ◽  
Olivier Chassande ◽  
Diego Mantovani
Keyword(s):  
Bone Regeneration ◽  
Bone Tissue ◽  
Bone Repair ◽  
Critical Issue ◽  
Bone Defects ◽  
Bone Tissue Regeneration ◽  
Differentiation Potential ◽  
Promising Alternative

Tissue engineering is a promising alternative to autografts or allografts for the regeneration of large bone defects. Cell-free biomaterials with different degrees of sophistication can be used for several therapeutic indications, to stimulate bone repair by the host tissue. However, when osteoprogenitors are not available in the damaged tissue, exogenous cells with an osteoblast differentiation potential must be provided. These cells should have the capacity to colonize the defect and to participate in the building of new bone tissue. To achieve this goal, cells must survive, remain in the defect site, eventually proliferate, and differentiate into mature osteoblasts. A critical issue for these engrafted cells is to be fed by oxygen and nutrients: the transient absence of a vascular network upon implantation is a major challenge for cells to survive in the site of implantation, and different strategies can be followed to promote cell survival under poor oxygen and nutrient supply and to promote rapid vascularization of the defect area. These strategies involve the use of scaffolds designed to create the appropriate micro-environment for cells to survive, proliferate, and differentiate in vitro and in vivo. Hydrogels are an eclectic class of materials that can be easily cellularized and provide effective, minimally invasive approaches to fill bone defects and favor bone tissue regeneration. Furthermore, by playing on their composition and processing, it is possible to obtain biocompatible systems with adequate chemical, biological, and mechanical properties. However, only a good combination of scaffold and cells, possibly with the aid of incorporated growth factors, can lead to successful results in bone regeneration. This review presents the strategies used to design cellularized hydrogel-based systems for bone regeneration, identifying the key parameters of the many different micro-environments created within hydrogels.

Sign in / Sign up

Export Citation Format

Share Document