scholarly journals Determination of Vibroacoustic Parameters of Polyurethane Mats for Residential Building Purposes

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 314
Author(s):  
Krzysztof Nering ◽  
Alicja Kowalska-Koczwara
Keyword(s):  
Residential Buildings ◽  
Dynamic Stiffness ◽  
Residential Building ◽  
Acoustic Properties ◽  
Material Density ◽  
Material Parameters ◽  
Acoustic Insulation ◽  
Measurement Methodology ◽  
Main Material

This paper is aimed at investigating the use of polyurethane mats, usually used as ballast mats, for residential building purposes. Ballast mats have features that may improve the vibroacoustic comfort in residential rooms. Their strength is certainly an advantage, along with vibration and acoustic insulation. However, the problem that an engineer has to deal with, for example in modeling these types of mats, is a limited knowledge of the material’s vibroacoustic parameters. Knowledge of these may be useful for residential buildings. This paper presents measurements of the vibroacoustic parameters of polyurethane mats, together with a suitable methodology and some results and analysis. The two main material parameters responsible for vibroacoustic protection were measured: the dynamic stiffness, which is related to the acoustic properties of the material, and the critical damping coefficient, which is obviously responsible for damping. The measurement methodology is clearly described. A total of five polyurethane materials with different densities were tested. It was possible to identify a relationship between the material density and the vibroacoustic parameters, which could offer an indication of which material to use, depending on the stimulus affecting a human in a given location.

scholarly journals Genetic Algorithms Based Reference Signal Determination for Temperature Control of Residential Buildings

2018 ◽  
Vol 8 (11) ◽  
pp. 2129 ◽  
Author(s):  
Domenico Gorni ◽  
Antonio Visioli
Keyword(s):  
Genetic Algorithms ◽  
Predictive Control ◽  
Residential Buildings ◽  
Reference Signal ◽  
Residential Building ◽  
Optimization Procedure ◽  
Software Tool ◽  
User Requirements ◽  
Optimal Set

This paper deals with the use of genetic algorithms for the determination of the optimal set-point signals for the control of the temperature in a residential building for which the use of the rooms, that is, the user requirements, are different throughout the day. In particular, the optimization procedure aims at minimizing the overall energy consumption by satisfying, at the same time, the comfort constraints set by the user. Both the case of radiators and fan-coil units are considered. The presence of unoccupied rooms is also addressed. Finally, a comparison between this approach and a Model Predictive Control based one is presented. Simulation results obtained by using TRNSYS software tool demonstrate the effectiveness of the method.

scholarly journals Determination of cracking causes in building structural elements

2021 ◽  
Vol 258 ◽  
pp. 09038
Author(s):  
Valentina Halushko ◽  
Alexandr Meneiliuk ◽  
Stanislav Kyryliuk
Keyword(s):  
Residential Buildings ◽  
Residential Building ◽  
Normal Operation ◽  
Theoretical Problem ◽  
Structural Elements ◽  
Regulatory Requirements ◽  
Different Depths ◽  
Base Soil ◽  
Horizontal Displacements

The article deals with the problems of buildings built many years ago, in which current and major repairs were not carried out in an appropriate manner. At the same time, buildings experience various deformations, such as yield, heel, subsidence, deflections, bends, twists, distortions, horizontal displacements. The survey of residential buildings built in the 80s is described and the analysis of the results of the survey of one of these buildings is carried out. The theoretical problem of the distribution of moisture in depth and various degrees of soil moisture has been solved. The reasons for the appearance of cracks in structures and cracks between individual building elements are also determined. The survey of a 9-storey brick residential building, built in the late 80s, which is in the period of normal operation, is considered. At the same time, the considered building is operated with significant deviations from regulatory requirements. The causes of cracks in individual structures and cracks between individual elements in the building are found. The problem of the distribution of moisture in depth with local soaking is solved on the basis of a numerical method, and the character of soil moistening at different depths with different degrees of moistening and characteristics of the base soil is obtained.

Analysing obsolescence, an elaborated model for residential buildings

2015 ◽  
Vol 33 (3) ◽  
pp. 210-227 ◽  
Author(s):  
André Thomsen ◽  
Kees van der Flier ◽  
Nico Nieboer
Keyword(s):  
Case Studies ◽  
Residential Buildings ◽  
Current Model ◽  
Residential Building ◽  
Theoretical Research ◽  
Social Implications ◽  
Actual Measurement ◽  
Content Type

Purpose – In previous research publications the authors combined the available knowledge about obsolescence in a conceptual model for further research on and appliance in the decision making about demolition. Since evidence-based theoretical research references on obsolescence are rare, the model inevitably had an explorative character. The purpose of this paper is to test and elaborate the model. Design/methodology/approach – A series of case studies were conducted in various residential building estates. In each estate the types of obsolescence (according to the model) and their interrelationships were identified. Findings – The model can usefully be applied; it enables the determination of types of obsolescence. The case studies also show that several types of obsolescence occur simultaneously, and that these types can be interrelated. This touches upon the complexity of cause-effect mechanisms as already mentioned in the introduction. One of the weaknesses is that information is sometimes available for only one point in time, and that the availability of information varies with the type of obsolescence. Research limitations/implications – The study is based on a limited selection of case studies. Further, the causal relationships between the types of obsolescence could not always be revealed. Practical implications – The current model does not distinguish between causes and effects. For further development of the model, cause-effect processes have to be further analysed. Social implications – Actual measurement of the extent of obsolescence per type is not part of this study, but has to be carried out before social implications can adequately be indicated. Originality/value – The paper presents a conceptual classification of obsolescence that turns out to be workable when tested in practice.

scholarly journals Determination of sustainable values for the parameters of the construction of residential buildings

2018 ◽  
Vol 33 ◽  
pp. 03055 ◽  
Author(s):  
Larisa Grigoreva ◽  
Vladimir Grigoryev
Keyword(s):  
Residential Buildings ◽  
Total Duration ◽  
Residential Building ◽  
Capital Investments ◽  
Construction Companies ◽  
High Rise ◽  
Planning And Design ◽  
Construction Organization ◽  
Ground Part

For the formation of programs for housing construction and planning of capital investments, when developing the strategic planning companies by construction companies, the norms or calculated indicators of the duration of the construction of high-rise residential buildings and multifunctional complexes are mandatory. Determination of stable values of the parameters for the high-rise construction residential buildings provides an opportunity to establish a reasonable duration of construction at the planning and design stages of residential complexes, taking into account the influence of market conditions factors. The concept of the formation of enlarged models for the high-rise construction residential buildings is based on a real mapping in time and space of the most significant redistribution with their organizational and technological interconnection - the preparatory period, the underground part, the above-ground part, external engineering networks, landscaping. The total duration of the construction of a residential building, depending on the duration of each redistribution and the degree of their overlapping, can be determined by one of the proposed four options. At the same time, a unified approach to determining the overall duration of construction on the basis of the provisions of a streamlined construction organization with the testing of results on the example of high-rise residential buildings of the typical I-155B series was developed, and the coefficients for combining the work and the main redevelopment of the building were determined.

MULTICRITERIAL SUSTAINABILITY ASSESSMENT OF RESIDENTIAL BUILDINGS

2009 ◽  
Vol 15 (4) ◽  
pp. 612-630 ◽  
Author(s):  
Marjana Šijanec Zavrl ◽  
Roko Žarnić ◽  
Jana Šelih
Keyword(s):  
Input Data ◽  
Sustainability Assessment ◽  
Residential Buildings ◽  
Residential Building ◽  
Assessment Method ◽  
Local Context ◽  
Second Step ◽  
Simple Method ◽  
The Impact

A simple method for the assessment of sustainability of a residential building is proposed. The method consists of two steps. First, areas that influence sustainability level of the building (e.g. building architecture, design, in‐built materials) are identified. For each area, several elements and corresponding indicators are determined. Depending on their nature, the indicators are expressed either in quantitative or qualitative terms. The impact areas and their corresponding elements influence all three aspects of sustainability. In the second step, the indicators are aggregated according to their influence on individual sustainability aspects. Special attention is placed to the determination of weights assigned to the indicators in order to make the assessment method relevant in the local context. Initially, the consensus‐based method within the research team was used as a technique for aggregated indicators’ weighting. Later, the open discourses among the developers and stakeholders, as well as surveys, were employed to determine the aggregated indicators’ weights. The proposed method is applied to a selected sample building, and the analysis of the results is carried out. The results obtained show that the completeness and reliability of the input data is crucial for the reliability of the proposed assessment method. Subjectivity in evaluators’ judgments required to score some indicators needs to be reduced by introducing adequate training of the assessors. The feedback from the potential users shows that the method has a potential for wider future implementation in practice. Santrauka Straipsnyje siūlomas paprastas gyvenamųjų namų darnos vertinimo metodas. Šiuo metodu skaičiuojama dviem etapais. Pirmuoju etapu nustatomi kriterijai, darantys įtaką pastato darnos lygiui (pavyzdžiui, pastato architektūra, konstrukcija, medžiagos). Nustatomi keli kiekvieną kriterijų apibūdinantys rodikliai. Priklausomai nuo pobūdžio jie gali būti kiekybiniai arba kokybiniai ir gali apibūdinti visus tris darnos aspektus. Antruoju etapu rodikliai sugrupuojami pagal jų įtaką atskiriems darnos aspektams. Ypatingas dėmesys skiriamas rodiklių reikšmingumų nustatymui. Tai vertinimo metodą daro tinkamą konkrečioms sąlygoms. Rodiklių reikšmingumai nustatomi grupės ekspertų nuomonių sutarimo metodu. Vėliau reikšmingumai tikslinami diskusijoje tarp susinteresuotų grupių narių. Pasiūlytas metodas pritaikytas pasirinktam tipiniam pastatui, atlikta gautų rezultatų analizė. Rezultatai atskleidė, jog pradinių duomenų išsamumas ir tikrumas daro lemiamą įtaką pasiūlyto vertinimo metodo patikimumui. Tinkamai apmokant vertintojus galima sumažinti kai kurių rodiklių vertinimo subjektyvumą. Potencialių vartotojų reakcija rodo, kad ateityje šis metodas gali būti plačiai taikomas.

scholarly journals Methods for determination of acoustic properties of building materials

2019 ◽  
Vol 282 ◽  
pp. 02061
Author(s):  
Lukáš Fiala ◽  
Petr Konrád ◽  
Robert Černý
Keyword(s):  
Urban Areas ◽  
Building Materials ◽  
Heavy Traffic ◽  
Harmonic Signal ◽  
Steel Sample ◽  
Acoustic Properties ◽  
Acoustic Insulation ◽  
Reverberation Chambers ◽  
High Level

Experimental determination of acoustic properties of building materials is an important task gaining higher importance due to demand for materials suitable for constructions located in places with high level of noise, typically in urban areas and places close to the areas with heavy traffic. In this paper, two types of experimental setups are arranged, and tested on steel prism and brick block. Transmitter-receiver method is based on exciting the tested material by one period of harmonic signal and analysis of response on two accelerometers placed on the excited and the opposite side of the sample. The second method is based on measurement of the sound pressure level in a system of two reverberation chambers by precise microphones and vibration analyzer. Transmitter-receiver measurement conducted on steel sample revealed the fact that further adjustment of the measurement setup and successive analysis is necessary. Measurement in reverberation chambers is convenient for comparison of acoustic insulation ability of heterogeneous building materials.

Tenants' Satisfaction in High Residential Building

2020 ◽  
Vol 17 (1) ◽  
pp. 41
Author(s):  
UMMU SHOLEHAH MOHD NOR
Keyword(s):  
Urban Areas ◽  
Residential Buildings ◽  
Low Cost ◽  
Residential Building ◽  
Real Estate Market ◽  
The Real Estate ◽  
Level Of Satisfaction ◽  
Considerable Impact ◽  
Residential Living ◽  
Medium Cost

High residential living in Malaysia has not been widely given a significant emphasises in literature despite its increasing scale and significance in the real estate market. The significance of high rise is mainly due the increasing rate of migration from rural to urban. It is estimated a total of 77.2 percent of the Malaysian population lived in urban areas in 2020. Approximately, 30 percent of this urban population lives in strata housing. These percentages are predicted to continue to increase in the future. The emergence of high residential building has been argued as confronting various problems which has considerable impact on this life style. Satisfaction is an important outcome of living in one’s dwelling, although it is not the only consideration. High residential building in Malaysia encountered numerous problems in term of management aspects, legislation aspects, and residents’ satisfaction. The purpose of this paper is to investigate the tenants’ satisfaction living in high residential buildings in Klang Valley. The questionnaires survey is conducted amongst 276 tenants at low cost and medium cost HRB using random sampling in HRB located at areas under jurisdiction Dewan Bandaraya Kuala Lumpur (DBKL), Majlis Bandaraya Subang Jaya (MBSJ), Majlis Bandaraya Shah Alam (MBSA), Majlis Bandaraya Subang Jaya (MBSJ), Majlis Perbandaran Selayang (MPS) and Majlis Perbandaran Ampang Jaya (MPAJ). The result from this study shows that tenant in medium cost residential building are more satisfied in term of facilities and management as compared to tenants in low cost residential building. Tenants also not disclosed to the existing act and procedure related to high residential building. In conclusion, this study suggested the Local Authority to emphasise the role of tenant. These recommendation hopefully will increase the level of satisfaction amongst the residents in HRB.

Automation of selected brazes' dynamic properties in high-temperatures' measurement process

2013 ◽  
Vol 18 (2-3) ◽  
pp. 33-41
Author(s):  
Dominik Sankowski ◽  
Marcin Bakala ◽  
Rafał Wojciechowski
Keyword(s):  
Surface Tension ◽  
High Temperatures ◽  
Dynamic Properties ◽  
Automatic Measurement ◽  
Measurement Methodology ◽  
Joining Process ◽  
Wetting Force ◽  
Research Grant

Abstract The good quality of several manufactured components frequently depends on solidliquid interactions existing during processing. Nowadays, the research in material engineering focuses also on modern, automatic measurement methods of joining process properties, i.a. wetting force and surface tension, which allows for quantitative determination of above mentioned parameters. In the paper, the brazes’ dynamic properties in high-temperatures’ measurement methodology and the stand for automatic determination of braze’s properties, constructed and implmented within the research grant nr KBN N N519 441 839 - An integrated platform for automatic measurement of wettability and surface tension of solders at high temperatures, are widely described

scholarly journals Optimal Control Strategies for Switchable Transparent Insulation Systems Applied to Smart Windows for US Residential Buildings

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2917
Author(s):  
Mohammad Dabbagh ◽  
Moncef Krarti
Keyword(s):  
Energy Use ◽  
Control Strategies ◽  
Residential Buildings ◽  
Residential Building ◽  
Optimization Approach ◽  
Optimal Controls ◽  
Peak Demand ◽  
Smart Windows ◽  
Insulation Systems ◽  
Rule Set

This paper evaluates the potential energy use and peak demand savings associated with optimal controls of switchable transparent insulation systems (STIS) applied to smart windows for US residential buildings. The optimal controls are developed based on Genetic Algorithm (GA) to identify the automatic settings of the dynamic shades. First, switchable insulation systems and their operation mechanisms are briefly described when combined with smart windows. Then, the GA-based optimization approach is outlined to operate switchable insulation systems applied to windows for a prototypical US residential building. The optimized controls are implemented to reduce heating and cooling energy end-uses for a house located four US locations, during three representative days of swing, summer, and winter seasons. The performance of optimal controller is compared to that obtained using simplified rule-based control sets to operate the dynamic insulation systems. The analysis results indicate that optimized controls of STISs can save up to 81.8% in daily thermal loads compared to the simplified rule-set especially when dwellings are located in hot climates such as that of Phoenix, AZ. Moreover, optimally controlled STISs can reduce electrical peak demand by up to 49.8% compared to the simplified rule-set, indicating significant energy efficiency and demand response potentials of the SIS technology when applied to US residential buildings.

Sign in / Sign up

Export Citation Format

Share Document