scholarly journals Modelling Nutrients and Organics Removal by Biological Slow Filtration in Micro-Polluted Water Source Treatment

Processes ◽  
2018 ◽  
Vol 6 (8) ◽  
pp. 128 ◽  
Author(s):  
Chengjin Zhang ◽  
Jian He ◽  
Zheng Zheng
Keyword(s):  
Removal Efficiency ◽  
Filtration Rate ◽  
Degradation Mechanism ◽  
Water Source ◽  
Biological Indicators ◽  
Hydraulic Head ◽  
Operating Conditions ◽  
Polluted Water ◽  
Removal Rates ◽  
Slow Filtration

The biological slow filtration (BSF) system as a simple and efficient environmental technology has been widely applied in treatment of ‘micro-polluted’ water. At present, many related studies have focused on the removal efficiency of biological indicators (such as bacteria and viruses). However, there is less research on the removal performance of nutrients and organics in the BSF system. In this paper, we employed a lab-scale biological slow filter to study the removal efficiency and degradation mechanism of nutrients and organics. We proved through adsorption of filter layer at the early running stage and biodegradation at the later stage, the BSF system could achieve effective removal of NH3-N, TN, TP, CODMn and turbidity and the corresponding removal rates are 83.65%, 42.45%, 42.94%, 60.41% and 83.55%, respectively. Furthermore, we also explored the influence of four main factors (filtration rate, filter depth, hydraulic head and temperature) and their interactions on removal rates of nutrients and organics in the BSF system and obtained the optimal operating parameters as follows: filtration rate 0.1 m/h, filter depth 0.8 m, hydraulic head 0.64 m, temperature 26.06 °C. This study would provide a theoretical foundation for the actual application of biological slow filter in treatment of micro-polluted water in developing countries and offer an optimized basis for the design of operating conditions.

Simultaneous Degradation of Cu(II) and Cr(VI) in the Micro-Polluted Water by Potassium Ferrate

2013 ◽  
Vol 295-298 ◽  
pp. 1191-1194
Author(s):  
Lei Zhang ◽  
Zhao Cheng Zhang ◽  
Jian Guo Cui
Keyword(s):  
Degradation Mechanism ◽  
Synergetic Effect ◽  
Oxidation Time ◽  
Polluted Water ◽  
Potassium Ferrate ◽  
Experiment Study ◽  
Removal Rates ◽  
Degradation Effect ◽  
Flocculation Time ◽  
Simultaneous Degradation

This Experiment study on the simultaneous degradation effect of Cu(II) and Cr(Ⅵ) in the micro-polluted water by potassium ferrate. And the influential elements on the removal effects and probed into the degradation mechanism was analyzed. The results indicated that the removal rates of Cu(II),Cr(Ⅵ) by synergetic effect of potassium ferrate oxidation and coagulation were 76.2%、62.2%,respectively,when the optimizing conditions were as follows: oxidation pH was 7,oxidation time was 20min,flocculation pH was 9,flocculation time was 30min and dosage of potassium ferrate was 40mg/L.

scholarly journals Nitrate Removal from Actual Wastewater by Coupling Sulfur-Based Autotrophic and Heterotrophic Denitrification under Different Influent Concentrations

Water ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 2913
Author(s):  
Feng Liu ◽  
Suqin Wang ◽  
Xuezhi Zhang ◽  
Feiyue Qian ◽  
Yaobing Wang ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Nitrate Removal ◽  
Operating Conditions ◽  
Coupled Systems ◽  
Polluted Water ◽  
Sequencing Analysis ◽  
Autotrophic Denitrification ◽  
Actual Wastewater ◽  
Denitrification Process ◽  
Heterotrophic Denitrification

Contamination of wastewater with organic-limited nitrates has become an urgent problem in wastewater treatment. The cooperating heterotrophic with sulfur autotrophic denitrification is an alternative process and the efficiency has been assessed in many studies treating simulated wastewater under different operating conditions. However, due to the complex and diverse nature of actual wastewater, more studies treating actual wastewater are still needed to evaluate the feasibility of collaborative denitrification. In this study, lab-scale experiments were performed with actual nitrate polluted water of two different concentrations, with glucose and sodium thiosulfate introduced as mixed electron donors in the coupling sulfur-based autotrophic and heterotrophic denitrification. Results showed that the optimum denitrification performance was exhibited when the influent substrate mass ratio of C/N/S was 1.3/1/1.9, with a maximum denitrification rate of 3.52 kg NO3−-N/(m3 day) and nitrate removal efficiency of 93% in the coupled systems. Illumina high-throughput sequencing analysis revealed that autotrophic, facultative, and heterotrophic bacteria jointly contributed to high nitrogen removal efficiency. The autotrophic denitrification maintained as the predominant process, while the second most prevalent denitrification process gradually changed from heterotrophic to facultative with the increase of influent concentration at optimum C/N/S ratio conditions. Furthermore, the initiation of dissimilatory nitrate reduction to ammonium (DNRA) was very pivotal in promoting the entire denitrification process. These results suggested that sulfur-based autotrophic coupled with heterotrophic denitrifying process is an alternative and promising method to treat nitrate containing wastewater.

Comparative Bio-sorption of Cadmium and Nickel Ions from Aqueous Solution onto Fibers of Date Palm using Fluidized Bed Column

2019 ◽  
Vol 70 (5) ◽  
pp. 1507-1512
Author(s):  
Baker M. Abod ◽  
Ramy Mohamed Jebir Al-Alawy ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Fluidized Bed ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Date Palm ◽  
Operating Conditions ◽  
Initial Concentration ◽  
Bed Height

The aim of this study is to use the dry fibers of date palm as low-cost biosorbent for the removal of Cd(II), and Ni(II) ions from aqueous solution by fluidized bed column. The effects of many operating conditions such as superficial velocity, static bed height, and initial concentration on the removal efficiency of metal ions were investigated. FTIR analyses clarified that hydroxyl, amine and carboxyl groups could be very effective for bio-sorption of these heavy metal ions. SEM images showed that dry fibers of date palm have a high porosity and that metal ions can be trapped and sorbed into pores. The results show that a bed height of 6 cm, velocity of 1.1Umf and initial concentration for each heavy metal ions of 50 mg/L are most feasible and give high removal efficiency. The fluidized bed reactor was modeled using ideal plug flow and this model was solved numerically by utilizing the MATLAB software for fitting the measured breakthrough results. The breakthrough curves for metal ions gave the order of bio-sorption capacity as follow: Cd(II)]Ni(II).

Utilisation of Biomass and Hybrid Biochar from Elephant Grass and Low Density Polyethylene for the Competitive Adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) from Aqueous Media

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Lois T. Arowoyele ◽  
Samuel Ogunniyi ◽  
Comfort A. Adeyanju ◽  
Folasade M. Oladipo-Emmanuel ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Contact Time ◽  
Competitive Adsorption ◽  
Adsorption Process ◽  
Aqueous Media ◽  
Polluted Water ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Elephant Grass

Background: The presence of pollutants in polluted water is not singularized hence pollutant species are constantly in competition for active sites during the adsorption process. A key advantage of competitive adsorption studies is that it informs on the adsorbent performance in real water treatment applications. Objective: This study aims to investigate the competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) using elephant grass (Pennisetum purpureum) biochar and hybrid biochar from LDPE. Method: The produced biochar was characterised by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The effect of adsorption parameters, equilibrium isotherm modelling and parametric studies were conducted based on data from the batch adsorption experiments. Results: For both adsorbents, the removal efficiency was >99% over the domain of the entire investigation for dosage and contact time suggesting that they are very efficient for removing multiple heavy metals from aqueous media. It was observed that removal efficiency was optimal at 2 g/l dosage and contact time of 20 minutes for both adsorbent types. The Elovich isotherm and the pseudo-second order kinetic models were best-fit for the competitive adsorption process. Conclusion: The study was able to successfully reveal that biomass biochar from elephant grass and hybrid biochar from LDPE can be used as effective adsorbent material for the removal of heavy metals from aqueous media. This study bears a positive implication for environmental protection and solid waste management.

scholarly journals Oxidative Extractive Desulfurization System for Fuel Oil Using Acidic Eutectic-Based Ionic Liquid

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 1050
Author(s):  
Sarrthesvaarni Rajasuriyan ◽  
Hayyiratul Fatimah Mohd Zaid ◽  
Mohd Faridzuan Majid ◽  
Raihan Mahirah Ramli ◽  
Khairulazhar Jumbri ◽  
...  
Keyword(s):  
Ionic Liquids ◽  
Removal Efficiency ◽  
Environmental Effects ◽  
Sulfur Compounds ◽  
Operating Conditions ◽  
Fuel Oil ◽  
Organosulfur Compounds ◽  
Dsc Analysis ◽  
Oil Refineries ◽  
Desulfurization Process

The biggest challenge faced in oil refineries is the removal of sulfur compounds in fuel oil. The sulfur compounds which are found in fuel oil such as gasoline and diesel, react with oxygen in the atmosphere to produce sulfur oxide (SOx) gases when combusted. These sulfur compounds produced from the reaction with oxygen in the atmosphere may result in various health problems and environmental effects. Hydrodesulfurization (HDS) is the conventional process used to remove sulfur compounds from fuel oil. However, the high operating conditions required for this process and its inefficiency in removing the organosulfur compounds turn to be the major drawbacks of this system. Researchers have also studied several alternatives to remove sulfur from fuel oil. The use of ionic liquids (ILs) has also drawn the interest of researchers to incorporate them in the desulfurization process. The environmental effects resulting from the use of these ILs can be eliminated using eutectic-based ionic liquids (EILs), which are known as greener solvents. In this research, a combination of extractive desulfurization (EDS) and oxidative desulfurization (ODS) using a photocatalyst and EIL was studied. The photocatalyst used is a pre-reported catalyst, Cu-Fe/TiO2 and the EIL were synthesized by mixing choline chloride (ChCl) with organic acids. The acids used for the EILs were propionic acid (PA) and p-toluenesulfonic acid (TSA). The EILs synthesized were characterized using thermogravimetry analyser (TGA) differential scanning calorimetry (DSC) analysis to determine the physical properties of the EILs. Based on the TGA analysis, ChCl (1): PA (3) obtained the highest thermal stability whereas, as for the DSC analysis, all synthesized EILs have a lower melting point than its pure component. Further evaluation on the best EIL for the desulfurization process was carried out in a photo-reactor under UV light in the presence of Cu-Fe/TiO2 photocatalyst and hydrogen peroxide (H2O2). Once the oxidation and extraction process were completed, the oil phase of the mixture was analyzed using high performance liquid chromatography (HPLC) to measure the sulfur removal efficiency. In terms of the desulfurization efficiency, the EIL of ChCl (1): TSA (2) showed a removal efficiency of about 99.07%.

Study on De-Nitrification of Improved Step-Feed Progress

2014 ◽  
Vol 703 ◽  
pp. 171-174
Author(s):  
Bing Wang ◽  
Yi Xiao ◽  
Shou Hui Tong ◽  
Lan Fang ◽  
Da Hai You ◽  
...  
Keyword(s):  
Water Quality ◽  
Organic Matter ◽  
Fluidized Bed ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Removal Rate ◽  
Operating Conditions ◽  
Removal Mechanism ◽  
Aerobic Zone

Improved step-feed de-nitrification progress combined with biological fluidized bed was introduced in this study. The progress had good performance and capacity of de-nitrification and organic matter. The experiment result showed that the de-nitrification efficiency of the improved biological fluidized bed with step-feed process was higher than the fluidized bed A/O process under the same water quality and the operating conditions. When the influent proportion of each segment was equal, the system showed good nitrogen removal efficiency with the change of influent C/N ratio, HRT and sludge return ratio. The removal rate of TN reached up to 88.2%. It showed that the simultaneous nitrification and de-nitrification phenomenon happened in the aerobic zone. The nitrogen removal mechanism was also studied.

scholarly journals Evaluation of wet air oxidation variables for removal of organophosphorus pesticide malathion using Box-Behnken design

2016 ◽  
Vol 75 (3) ◽  
pp. 619-628 ◽  
Author(s):  
Melike Isgoren ◽  
Erhan Gengec ◽  
Sevil Veli
Keyword(s):  
Removal Efficiency ◽  
Applied Pressure ◽  
Organophosphorus Pesticide ◽  
Operating Conditions ◽  
Quadratic Model ◽  
Air Oxidation ◽  
Wet Air Oxidation ◽  
Reaction Conditions ◽  
Efficient Treatment ◽  
Optimum Reaction

This paper deals with finding optimum reaction conditions for wet air oxidation (WAO) of malathion aqueous solution, by Response Surface Methodology. Reaction conditions, which affect the removal efficiencies most during the non-catalytic WAO system, are: temperature (60–120 °C), applied pressure (20–40 bar), the pH value (3–7), and reaction time (0–120 min). Those were chosen as independent parameters of the model. The interactions between parameters were evaluated by Box-Behnken and the quadratic model fitted very well with the experimental data (29 runs). A higher value of R2 and adjusted R2 (>0.91) demonstrated that the model could explain the results successfully. As a result, optimum removal efficiency (97.8%) was obtained at pH 5, 20 bars of pressure, 116 °C, and 96 min. These results showed that Box–Behnken is a suitable design to optimize operating conditions and removal efficiency for non-catalytic WAO process. The EC20 value of raw wastewater was measured as 35.40% for malathion (20 mg/L). After the treatment, no toxicity was observed at the optimum reaction conditions. The results show that the WAO is an efficient treatment system for malathion degradation and has the ability of converting malathion to the non-toxic forms.

Simultaneous oxidation and reduction treatments of polluted water by a bio-electro reactor

1996 ◽  
Vol 34 (9) ◽  
pp. 101-108 ◽  
Author(s):  
M. Kuroda ◽  
T. Watanabe ◽  
Y. Umedu
Keyword(s):  
Aqueous Solution ◽  
Organic Matter ◽  
Electric Current ◽  
Removal Efficiency ◽  
Concentration Ratio ◽  
Nitrate Removal ◽  
Hydrogen Gas ◽  
Polluted Water ◽  
Simultaneous Oxidation ◽  
Denitrifying Microorganisms

Application of a bio-electro reactor for treatment of various kinds of polluted water was investigated experimentally. Aqueous solution of nitrate, ammonium and/or organic matter were used as synthetic polluted water. Denitrification of the nitrate polluted water without organic matter proceeded effectively by utilizing hydrogen gas produced by electrolysis of water in the reactor. The bio-electro reactor was also available for the treatment of nitrate polluted water containing organic matter when the C/N concentration ratio was up to 1.0 under the condition of 100 mA of applied electric current. The nitrate removal efficiency from nitrate polluted water containing acetate at C/N=1.0 was more than 90% at 5 hours of HRT and 80% even at 2.8 h HRT. For the treatment of ammonium polluted water, nitrification and denitrification proceeded simultaneously in a bio-electro reactor where nitrifying and denitrifying microorganisms were immobilized on the electrodes. The results obtained in this study suggested that the bio-electro reactor system was capable to application for oxidation and reduction treatments of the nitrate and ammonium polluted water.

Effect of operating conditions on Bromate Removal Efficiency in BAC filters

2002 ◽  
Vol 94 (4) ◽  
pp. 182-193 ◽  
Author(s):  
Mary Jo Kirisits ◽  
Vernon L. Snoeyink ◽  
Joanne C. Chee-Sanford ◽  
Becky J. Daugherty ◽  
Jess C. Brown ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Operating Conditions

Treatment of dairy wastewaters by electrocoagulation using iron electrodesTraitement des eaux résiduaires d'une laiterie par électrocoagulation avec des électrodes de fer

2014 ◽  
Vol 50 (2) ◽  
pp. 198-209 ◽  
Author(s):  
Malika Aoudjehane ◽  
Mohamed Elghazali Benatallah
Keyword(s):  
Electrical Conductivity ◽  
Removal Efficiency ◽  
Current Density ◽  
Oxygen Demand ◽  
Operating Conditions ◽  
Electrolysis Time ◽  
Electrode Consumption ◽  
Treatment Conditions ◽  
Consumption Energy ◽  
Optimal Efficiency

A procedure of electrocoagulation (EC) using iron electrodes has been used for the treatment of the wastewaters produced by the Beni-Tamou dairy in Algeria. The effect of the operating conditions, such as the current intensity, the electrolysis time, the pH of the solution and the electrical conductivity, on the removal efficiency of chemical oxygen demand (COD) and the total suspended solids (TSS) has been studied. An inter-electrode distance of 1 cm has been maintained constant during the tests. It has been found that an increase in electrolysis time and current density improved the treatment significantly, albeit with a greater consumption of energy as well as an increased electrode consumption. The results of the electrocoagulation treatment under various operating conditions show that the optimal efficiency has been obtained under the following conditions: 60 minutes of electrolysis, a current density of 200 A/m2, a pH 8, an electrical conductivity of 4.72 mS/cm and a consumption energy of 13.57 kWh/m3. Under these conditions, the removal efficiency for the COD and TSS parameters is 93.26 and 99.3%, respectively. The optimal treatment conditions of dairy wastewaters have resulted in final COD and TSS concentrations of 41.5 and 27 mg/L, respectively, values that are conform to industrial liquid effluents discharge norms.

Sign in / Sign up

Export Citation Format

Share Document