scholarly journals Conductive Compartmented Capsules Encapsulating a Bitumen Rejuvenator

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1361
Author(s):  
Amir Tabaković ◽  
Joseph Mohan ◽  
Aleksandar Karač

This paper explores the potential use of conductive alginate capsules encapsulating a bitumen rejuvenator as a new extrinsic self-healing asphalt method. The capsules combine two existing self-healing asphalt technologies: (1) rejuvenator encapsulation and (2) induction heating to create a self-healing system that will provide rapid and effective asphalt pavement repair. The work presents a proof of concept for the encapsulation process, which involves embedding the capsules into the bitumen mortar mixture and the survival rate of the capsules in the asphalt mixture. A drip capsule production process was adopted and scaled up to the production of 20l wet capsules at rate of 0.22 l/min. To prove the effectiveness and its ability to survive asphalt production process, the capsules were prepared and subjected to thermogravimetric analysis (TGA) and uniaxial compression Test (UCT). The test results demonstrated that the capsules had suitable thermal characteristics and mechanical strength to survive the asphalt mixing and compaction process. Scanning electron microscopy (SEM) was employed to investigate physiological properties, such as rejuvenator (oil) and iron particle distribution, within the capsules. The electrical resistance tests proved that the capsules were capable of conducting electrical current. The capsules were also tested for their conductive properties in order to determine whether they are capable of conducting and distributing the heat once subjected to induction heating. The results showed that capsules containing higher amounts of iron (alginate/iron powder in a ratio of 20:80 by weight) can efficiently conduct and distribute heat. To prove its success as an asphalt healing system, conductive alginate capsules encapsulating a bitumen rejuvenator were embedded in a bitumen mortar mix. The samples where then subjected to local damaging and healing events, and the degree of healing was quantified. The research findings indicate that conductive alginate capsules encapsulating a bitumen rejuvenator present a promising new approach for the development of an extrinsic self-healing asphalt pavement systems.

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Mohd Fahmi Haikal Mohd Ghazali ◽  
Mohd Rosli Mohd Hasan ◽  
Anasyida Abu Seman ◽  
Dillon Dipagk Dorett ◽  
Najib Mukhtar ◽  
...  

The concept of self-healing has an excellent potential to extend the life of asphalt pavement. This technology can be considered a sustainable technology due to its ability to reduce the utilization of asphalt mixture production materials used for road maintenance, polluting the environment. It is a complex physicochemical process wherein the molecular diffusion healing mechanisms in asphalt materials are inspired by self-healing polymeric systems, which describe the self-recovery behaviors based on polymer chain dynamics. Several methods have been adopted to improve the self-healing of asphalt, one of which is induction healing. It is the process of heating the asphalt pavement incorporated with an electrically conductive material such as steel fibers, wherein asphalt healing is undertaken via electric field induction. Induction healing via induction heating occurs with eddy current where the electric current flows within the conductive fibers when magnetically susceptible under the magnetic field. Microwave heating is another self-healing method similar to induction in which magnetic radiation is employed to treat asphalt mixtures instead of the electric field-induced induction healing processes. The conductive fibers can absorb the electromagnetic (EM) waves to convert them into heat energy through doublet polarization, interface polarization, and electrical conduction dissipation when placed in the microwave field. These two types of heating systems, which are induction heating and microwave heating, are compared and discussed thoroughly in this study. Finally, some recommendations for the future development of self-healing asphalt are proposed.


2012 ◽  
Vol 5 ◽  
pp. 293-298
Author(s):  
Mao Cai Zhao ◽  
Shi Xian Gao ◽  
Da Wei Shi ◽  
Qi Shu Huang

The thesis utilizes the Penetrating Strength Detector of Shallow Pavement to conduct impacting penetration experiment, uniaxial compression test and diametral compression test to asphalt mixture of different void ratios and cycles of freezing and thawing, and then we’ve obtained the relationship between average penetration depth and compressive strength as well as tensile splitting strength of mixture, moreover, the initial reference standard of the Penetrating Strength Detector of Shallow Pavement is established. Afterwards, the thesis conducts impacting penetration test to the asphalt pavement cores from Chongzun freeway in Guizhou Province suffering from ice frozen damage. The effectiveness of the Penetrating Strength Detector of Shallow Pavement has been proved.


2016 ◽  
Vol 106 ◽  
pp. 404-414 ◽  
Author(s):  
J. Norambuena-Contreras ◽  
A. Garcia

2019 ◽  
Vol 9 (3) ◽  
pp. 468 ◽  
Author(s):  
Shi Xu ◽  
Amir Tabaković ◽  
Xueyan Liu ◽  
Damian Palin ◽  
Erik Schlangen

It has been demonstrated that calcium alginate capsules can be used as an asphalt healing system by pre-placing rejuvenator (healing agent) into the asphalt mix and releasing the rejuvenator on demand (upon cracking). This healing mechanism relies on the properties of capsules which are determined by the capsule preparation process. In this study, to optimize the calcium alginate capsules, capsules are prepared using varying Alginate/Rejuvenator (A/R) ratios. Light microscope microscopy and Environmental Scanning Electron Microscope (ESEM) are employed to characterize the morphology and microstructure of these capsules. Thermal stability and mechanical property are investigated by thermogravimetric analysis (TGA) and compressive tests. The testing results indicate that higher alginate content results in smaller diameter and lower thermal resistance, but higher compressive strength. The optimum A/R ratio of calcium alginate capsules is found to be 30/70. To prove the effectiveness of the optimized capsules, the capsules are embedded in asphalt mortar beams and a bending and healing program is carried out. The effect of capsule shell material on the mechanical response of asphalt mixture is evaluated through three-point bending on the mortar beams embedded with blank capsules (without the healing agent). Aged mortar beams containing alginate capsules encapsulating rejuvenator demonstrate a higher strength recovery after bending tests, which indicates effective healing due to the release of the rejuvenators from the capsules.


Author(s):  
Feng Li ◽  
Gulnigar Ablat ◽  
Siqi Zhou ◽  
Yixin Liu ◽  
Yufeng Bi ◽  
...  

AbstractIn ice and snow weather, the surface texture characteristics of asphalt pavement change, which will significantly affect the skid resistance performance of asphalt pavement. In this study, five asphalt mixture types of AC-5, AC-13, AC-16, SMA-13, SMA-16 were prepared under three conditions of the original state, ice and snow. In this paper, a 2D-wavelet transform approach is proposed to characterize the micro and macro texture of pavement. The Normalized Energy (NE) is proposed to describe the pavement texture quantitatively. Compared with the mean texture depth (MTD), NE has the advantages of full coverage, full automation and wide analytical scale. The results show that snow increases the micro-scale texture because of its fluffiness, while the formation of the ice sheets on the surface reduces the micro-scale texture. The filling effect of snow and ice reduces the macro-scale texture of the pavement surface. In a follow-up study, the 2D-wavelet transform approach can be applied to improve the intelligent driving braking system, which can provide pavement texture information for the safe braking strategy of driverless vehicles.


2021 ◽  
Vol 284 ◽  
pp. 122728
Author(s):  
Nilo Ruiz-Riancho ◽  
Alvaro Garcia ◽  
Daniel Grossegger ◽  
Tahseen Saadoon ◽  
Robin Hudson-Griffiths

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4139
Author(s):  
Yanju Wang ◽  
Zhiyang Lin ◽  
Can Tang ◽  
Wenfeng Hao

The amounts of the components in a microcapsule self-healing system significantly impact the basic performance and self-healing performance of concrete. In this paper, an orthogonal experimental design is used to investigate the healing performance of microcapsule self-healing concrete under different pre-damage loads. The strength recovery performance and sound speed recovery performance under extensive damage are analyzed. The optimum factor combination of the microcapsule self-healing concrete is obtained. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) are carried out on the concrete samples before and after healing to determine the healing mechanism. The results show that the healing effect of self-healing concrete decreases with an increase in the pre-damage load, and the sound speed recovery rate increases with an increase in the damage degree. The influence of the sodium silicate content on the compressive strength and compressive strength recovery rate of the self-healing concrete increases, followed by a decrease. The optimum combination of factors of the microcapsule self-healing system is 3% microcapsules, 30% sodium silicate, and 15% sodium fluosilicate. The results can be used for the design and preparation of self-healing concrete.


Sign in / Sign up

Export Citation Format

Share Document