scholarly journals Conversion of Organic Matter of Carbonate Deposits in the Hydrothermal Fluid

Processes ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 1893
Author(s):  
Sergey M. Petrov ◽  
Alfiya I. Lakhova ◽  
Aliya G. Safiulina ◽  
Nikita E. Ignashev ◽  
Mohammed A. Khelkhal ◽  
...  

This present paper investigates the conversion of organic matter in carbonate rocks of the Semiluksko-Mendymsky horizon Volga-Ural Basin under hydrothermal conditions with excess water in subcritical conditions at 613–653 K and 170–200 Bar. It has been found that the content of hydrocarbon extracts increases (relatively) which indicates the oil-generating potential of the studied deposits. Besides, it has been shown that organic matter undergoes oxidation reactions under hydrothermal conditions, as indicated by the presence of oxidized structures in the extracted hydrocarbons. Moreover, our results indicate that increasing the temperature and pressure of the used hydrothermal fluid leads to an increase in the content of n-alkanes C25-C30 and asphaltenes in the extracts. On the other hand, it has been found that saturated, aromatic hydrocarbons and resins content decreases at this stage. The obtained data about the geochemical parameters dependencies of the hydrocarbons obtained from the studied carbonate rock on temperature and pressure associated to hydrothermal effect show possible pathways of migration, genesis, and formation of hydrocarbon deposits.

2021 ◽  
Vol 628 (6) ◽  
pp. 25-29
Author(s):  
S. M. Petrov ◽  

The paper presents the results of comparative studies to identify the regularities of the transformation of organic matter in a siliceous-clayey carbonate rock in a hydrothermal fluid at temperatures of 340-380°C and pressures of 17-20 MPa. It was found that in a hydrothermal fluid with an excess of water with increasing temperature and pressure in a carbonate rock containing organic matter, oxidation reactions dominate with the accumulation of aromatic hydrocarbons, resins, and asphaltenes. The dependences of the values of the geochemical parameters of hydrocarbons (extracts) of carbonate rock on the temperature and pressure of the hydrothermal fluid are shown. The optimal thermobaric parameters of a hydrothermal fluid for a carbonate rock are 340°C and 17 MPa; under these conditions, the amount of petroleum hydrocarbons increases against the background of a decrease in the content of organic matter, the pore diameter increases, and micropores are formed. The obtained experimental data contribute to the development of technologies for the development of carbonate rocks.


Georesursy ◽  
2020 ◽  
Vol 22 (4) ◽  
pp. 30-40
Author(s):  
Mikhail Yu. Zubkov

The results of hydrothermal modeling of the formation of epigenetic mineral associations and secondary reservoirs in various types of sedimentary rocks of the Jurassic age in Western Siberia in the H2O-H2O2 system are considered. The experiments were carried out at a temperature of 390°C, a pressure of 70 MPa and H2O2 concentrations varying from 0 to 37.5%. The duration of the experiments was 10 days. In all experiments, a pyrite mixture was added as a buffer. It was found that in experiments in which there was no H2O2, that is, the hydrothermal fluid consisted only of water, there was an intense formation of bitumen and volatile components from the organic matter present in the initial samples. The process of generation of bitumen and volatile components was accompanied by fluid fracturing of rocks and the formation of secondary porosity. Under these conditions, carbonates (calcite, siderite), plagioclases, and kaolinite turned out to be unstable. On the contrary, the formation of hydrothermal ferruginous chlorite was noted. Dissolution of unstable mineral phases by hydrothermal fluid led to the formation of additional secondary porosity. As the concentration of H2O2 and, accordingly, oxygen in the composition of the hydrothermal fluid increased, more and more complete oxidation of the organic matter present in the composition of the sediments was noted until its complete disappearance. With an increase in the oxygen concentration in the composition of the hydrothermal fluid, the appearance of first magnetite and then hematite, native sulfur, and anhydrite was observed. Under hydrothermal conditions with a maximum oxygen concentration, the formation of kaolinite and various sulfates in addition to anhydrite, represented by millosevichite, alum, as well as phases with the participation of elements that make up autoclaves, nickel and chromium sulfates, was noted. Intensive silicification of the sample surface is noted, as well as the constant presence of amorphous silica, which, along with various sulfates, is a quenching phase. These mineral phases are separated from the supersaturated hydrothermal fluid due to its rapid cooling and do not have time to form well-faceted crystals, but are present in the form of loose microporous aggregates. Along with kaolinite, the formation of hydrothermal film illite is noted. The results obtained indicate that the presence of bitumen in the Jurassic sediments is an important exploratory feature, indicating that in this place they were subjected to hydrothermal action, which means, firstly, secondary reservoirs with high filtration and capacity properties were formed, and second, there was an intensive generation of hydrocarbons and, as a consequence, the formation of hydrocarbon deposits.


2021 ◽  
Vol 18 (2) ◽  
pp. 398-415
Author(s):  
He Bi ◽  
Peng Li ◽  
Yun Jiang ◽  
Jing-Jing Fan ◽  
Xiao-Yue Chen

AbstractThis study considers the Upper Cretaceous Qingshankou Formation, Yaojia Formation, and the first member of the Nenjiang Formation in the Western Slope of the northern Songliao Basin. Dark mudstone with high abundances of organic matter of Gulong and Qijia sags are considered to be significant source rocks in the study area. To evaluate their development characteristics, differences and effectiveness, geochemical parameters are analyzed. One-dimensional basin modeling and hydrocarbon evolution are also applied to discuss the effectiveness of source rocks. Through the biomarker characteristics, the source–source, oil–oil, and oil–source correlations are assessed and the sources of crude oils in different rock units are determined. Based on the results, Gulong and Qijia source rocks have different organic matter primarily detrived from mixed sources and plankton, respectively. Gulong source rock has higher thermal evolution degree than Qijia source rock. The biomarker parameters of the source rocks are compared with 31 crude oil samples. The studied crude oils can be divided into two groups. The oil–source correlations show that group I oils from Qing II–III, Yao I, and Yao II–III members were probably derived from Gulong source rock and that only group II oils from Nen I member were derived from Qijia source rock.


2013 ◽  
Vol 2 (1) ◽  
pp. 82-90
Author(s):  
Justyna Smolarek ◽  
Leszek Marynowski

ABSTRACT Aromatic hydrocarbons are present in the fossil wood samples in relatively small amounts. In almost all of the tested samples the dominating aromatic hydrocarbon is perylene and its methyl and dimethyl derivatives. The most important biomarkers present in the aromatic fraction are dehydroabietane, siomonellite and retene, compounds characteristic for conifers. The distribution of discussed compounds is highly variable due to such early diagenetic processes affecting the wood as oxidation and the activity of microorganisms. MPI1 parameter values (methylphenanthrene index) for the majority of the samples are in the range of 0.1 to 0.5, which results in the highly variable values of Rc (converted value of vitrinite reflectance) ranging from 0.45 to 0.70%. Such values suggest that MPI1 parameter is not useful as maturity parameter in case of Middle Jurassic ore-bearing clays, even if measured strictly on terrestrial organic matter (OM). As a result of weathering processes (oxidation) the distribution of aromatic hydrocarbons changes. In the oxidized samples the amount of aromatic hydrocarbons, both polycyclic as well as aromatic biomarkers decreases.


Sign in / Sign up

Export Citation Format

Share Document