Identification of Seed Maize Fields With High Spatial Resolution and Multiple Spectral Remote Sensing Using Random Forest Classifier

Seed maize and common maize plots have different planting patterns and variety types. Identification of seed maize is the basis for seed maize growth monitoring, seed quality and common maize seed supply. In this paper, a random forest (RF) classifier is used to develop an approach for seed maize fields’ identification, using the time series vegetation indexes (VIs) calculated from multispectral data acquired from Landsat 8 and Gaofen 1 satellite (GF-1), field sample data, and texture features of Gaofen 2 satellite (GF-2) panchromatic data. Huocheng and Hutubi County in the Xinjiang Uygur Autonomous Region of China were chosen as study area. The results show that RF performs well with the combination of six VIs (normalized difference vegetation index (NDVI), enhanced vegetation index (EVI), triangle vegetation index (TVI), ratio vegetation index (RVI), normalized difference water index (NDWI) and difference vegetation index (DVI)) and texture features based on a grey-level co-occurrence matrix. The classification based on “spectrum + texture” information has higher overall, user and producer accuracies than that of spectral information alone. Using the “spectrum + texture” method, the overall accuracy of classification in Huocheng County is 95.90%, the Kappa coefficient is 0.92, and the producer accuracy for seed maize fields is 93.91%. The overall accuracy of the classification in Hutubi County is 97.79%, the Kappa coefficient is 0.95, and the producer accuracy for seed maize fields is 97.65%. Therefore, RF classifier inputted with high-resolution remote-sensing image features can distinguish two kinds of planting patterns (seed and common) and varieties types (inbred and hybrid) of maize and can be used to identify and map a wide range of seed maize fields. However, this method requires a large amount of sample data, so how to effectively use and improve it in areas lacking samples needs further research.

Download Full-text

Random Forest (RF) and Artificial Neural Network (ANN) Algorithms for LULC Mapping

Engineering and Technology Journal ◽

10.30684/etj.v38i4a.399 ◽

2020 ◽

Vol 38 (4A) ◽

pp. 510-514

Author(s):

Tay H. Shihab ◽

Amjed N. Al-Hameedawi ◽

Ammar M. Hamza

Keyword(s):

Neural Network ◽

Remote Sensing ◽

Artificial Neural Network ◽

Random Forest ◽

Satellite Image ◽

Landsat 8 ◽

Optical Remote Sensing ◽

Data Set ◽

Artificial Neural ◽

Artificial Neural Network Ann

In this paper to make use of complementary potential in the mapping of LULC spatial data is acquired from LandSat 8 OLI sensor images are taken in 2019. They have been rectified, enhanced and then classified according to Random forest (RF) and artificial neural network (ANN) methods. Optical remote sensing images have been used to get information on the status of LULC classification, and extraction details. The classification of both satellite image types is used to extract features and to analyse LULC of the study area. The results of the classification showed that the artificial neural network method outperforms the random forest method. The required image processing has been made for Optical Remote Sensing Data to be used in LULC mapping, include the geometric correction, Image Enhancements, The overall accuracy when using the ANN methods 0.91 and the kappa accuracy was found 0.89 for the training data set. While the overall accuracy and the kappa accuracy of the test dataset were found 0.89 and 0.87 respectively.

Download Full-text

TEMPERATURA DE SUPERFÍCIE E A RELAÇÃO COM O ÍNDICE DE VEGETAÇÃO POR DIFERENÇA NORMALIZADA (NDVI) NA MICROBACIA DO RIO DA BATATEIRAS, CRATO-CE

Revista da Casa da Geografia de Sobral (RCGS) ◽

10.35701/rcgs.v21n2.548 ◽

2019 ◽

Vol 21 (2) ◽

pp. 1310-1320

Author(s):

Cícera Celiane Januário da Silva ◽

Vinicius Ferreira Luna ◽

Joyce Ferreira Gomes ◽

Juliana Maria Oliveira Silva

Keyword(s):

Remote Sensing ◽

Surface Temperature ◽

Temperature Measurement ◽

Rainy Season ◽

Satellite Images ◽

Vegetation Index ◽

Normalized Difference Vegetation Index ◽

Landsat 8 ◽

Low Density ◽

Difference Map

O objetivo do presente trabalho é fazer uma comparação entre a temperatura de superfície e o Índice de Vegetação por Diferença Normalizada (NDVI) na microbacia do rio da Batateiras/Crato-CE em dois períodos do ano de 2017, um chuvoso (abril) e um seco (setembro) como também analisar o mapa de diferença de temperatura nesses dois referidos períodos. Foram utilizadas imagens de satélite LANDSAT 8 (banda 10) para mensuração de temperatura e a banda 4 e 5 para geração do NDVI. As análises demonstram que no mês de abril a temperatura da superfície variou aproximadamente entre 23.2ºC e 31.06ºC, enquanto no mês correspondente a setembro, os valores variaram de 25°C e 40.5°C, sendo que as maiores temperaturas foram encontradas em locais com baixa densidade de vegetação, de acordo com a carta de NDVI desses dois meses. A maior diferença de temperatura desses dois meses foi de 14.2°C indicando que ocorre um aumento da temperatura proporcionado pelo período que corresponde a um dos mais secos da região, diferentemente de abril que está no período de chuvas e tem uma maior umidade, presença de vegetação e corpos d’água que amenizam a temperatura.Palavras-chave: Sensoriamento Remoto; Vegetação; Microbacia. ABSTRACTThe objective of the present work is to compare the surface temperature and the Normalized Difference Vegetation Index (NDVI) in the Batateiras / Crato-CE river basin in two periods of 2017, one rainy (April) and one (September) and to analyze the temperature difference map in these two periods. LANDSAT 8 (band 10) satellite images were used for temperature measurement and band 4 and 5 for NDVI generation. The analyzes show that in April the surface temperature varied approximately between 23.2ºC and 31.06ºC, while in the month corresponding to September, the values ranged from 25ºC and 40.5ºC, and the highest temperatures were found in locations with low density of vegetation, according to the NDVI letter of these two months. The highest difference in temperature for these two months was 14.2 ° C, indicating that there is an increase in temperature provided by the period that corresponds to one of the driest in the region, unlike April that is in the rainy season and has a higher humidity, presence of vegetation and water bodies that soften the temperature.Key-words: Remote sensing; Vegetation; Microbasin.RESUMENEl objetivo del presente trabajo es hacer una comparación entre la temperatura de la superficie y el Índice de Vegetación de Diferencia Normalizada (NDVI) en la cuenca Batateiras / Crato-CE en dos períodos de 2017, uno lluvioso (abril) y uno (Septiembre), así como analizar el mapa de diferencia de temperatura en estos dos períodos. Las imágenes de satélite LANDSAT 8 (banda 10) se utilizaron para la medición de temperatura y las bandas 4 y 5 para la generación de NDVI. Los análisis muestran que en abril la temperatura de la superficie varió aproximadamente entre 23.2ºC y 31.06ºC, mientras que en el mes correspondiente a septiembre, los valores oscilaron entre 25 ° C y 40.5 ° C, y las temperaturas más altas se encontraron en lugares con baja densidad de vegetación, según el gráfico NDVI de estos dos meses. La mayor diferencia de temperatura de estos dos meses fue de 14.2 ° C, lo que indica que hay un aumento en la temperatura proporcionada por el período que corresponde a uno de los más secos de la región, a diferencia de abril que está en la temporada de lluvias y tiene una mayor humedad, presencia de vegetación y cuerpos de agua que suavizan la temperatura.Palabras clave: Detección remota; vegetación; Cuenca.

Download Full-text

Quantification of the Environmental Impacts of Highway Construction Using Remote Sensing Approach

Remote Sensing ◽

10.3390/rs13071340 ◽

2021 ◽

Vol 13 (7) ◽

pp. 1340

Author(s):

Shuailong Feng ◽

Shuguang Liu ◽

Lei Jing ◽

Yu Zhu ◽

Wende Yan ◽

...

Keyword(s):

Remote Sensing ◽

Environmental Impacts ◽

Land Surface ◽

Vegetation Index ◽

Highway Construction ◽

Temporal Changes ◽

Moisture Index ◽

Buffer Zones ◽

Wide Range ◽

Spatial And Temporal Changes

Highways provide key social and economic functions but generate a wide range of environmental consequences that are poorly quantified and understood. Here, we developed a before–during–after control-impact remote sensing (BDACI-RS) approach to quantify the spatial and temporal changes of environmental impacts during and after the construction of the Wujing Highway in China using three buffer zones (0–100 m, 100–500 m, and 500–1000 m). Results showed that land cover composition experienced large changes in the 0–100 m and 100–500 m buffers while that in the 500–1000 m buffer was relatively stable. Vegetation and moisture conditions, indicated by the normalized difference vegetation index (NDVI) and the normalized difference moisture index (NDMI), respectively, demonstrated obvious degradation–recovery trends in the 0–100 m and 100–500 m buffers, while land surface temperature (LST) experienced a progressive increase. The maximal relative changes as annual means of NDVI, NDMI, and LST were about −40%, −60%, and 12%, respectively, in the 0–100m buffer. Although the mean values of NDVI, NDMI, and LST in the 500–1000 m buffer remained relatively stable during the study period, their spatial variabilities increased significantly after highway construction. An integrated environment quality index (EQI) showed that the environmental impact of the highway manifested the most in its close proximity and faded away with distance. Our results showed that the effect distance of the highway was at least 1000 m, demonstrated from the spatial changes of the indicators (both mean and spatial variability). The approach proposed in this study can be readily applied to other regions to quantify the spatial and temporal changes of disturbances of highway systems and subsequent recovery.

Download Full-text

Mapping Allochemical Limestone Formations in Hazara, Pakistan Using Google Cloud Architecture: Application of Machine-Learning Algorithms on Multispectral Data

ISPRS International Journal of Geo-Information ◽

10.3390/ijgi10020058 ◽

2021 ◽

Vol 10 (2) ◽

pp. 58

Author(s):

Muhammad Fawad Akbar Khan ◽

Khan Muhammad ◽

Shahid Bashir ◽

Shahab Ud Din ◽

Muhammad Hanif

Keyword(s):

Machine Learning ◽

Remote Sensing ◽

Learning Algorithms ◽

Remote Sensing Data ◽

Kappa Coefficient ◽

Machine Learning Algorithms ◽

Landsat 8 ◽

Sensing Data ◽

Fossiliferous Limestone

Low-resolution Geological Survey of Pakistan (GSP) maps surrounding the region of interest show oolitic and fossiliferous limestone occurrences correspondingly in Samanasuk, Lockhart, and Margalla hill formations in the Hazara division, Pakistan. Machine-learning algorithms (MLAs) have been rarely applied to multispectral remote sensing data for differentiating between limestone formations formed due to different depositional environments, such as oolitic or fossiliferous. Unlike the previous studies that mostly report lithological classification of rock types having different chemical compositions by the MLAs, this paper aimed to investigate MLAs’ potential for mapping subclasses within the same lithology, i.e., limestone. Additionally, selecting appropriate data labels, training algorithms, hyperparameters, and remote sensing data sources were also investigated while applying these MLAs. In this paper, first, oolitic (Samanasuk), fossiliferous (Lockhart and Margalla) limestone-bearing formations along with the adjoining Hazara formation were mapped using random forest (RF), support vector machine (SVM), classification and regression tree (CART), and naïve Bayes (NB) MLAs. The RF algorithm reported the best accuracy of 83.28% and a Kappa coefficient of 0.78. To further improve the targeted allochemical limestone formation map, annotation labels were generated by the fusion of maps obtained from principal component analysis (PCA), decorrelation stretching (DS), X-means clustering applied to ASTER-L1T, Landsat-8, and Sentinel-2 datasets. These labels were used to train and validate SVM, CART, NB, and RF MLAs to obtain a binary classification map of limestone occurrences in the Hazara division, Pakistan using the Google Earth Engine (GEE) platform. The classification of Landsat-8 data by CART reported 99.63% accuracy, with a Kappa coefficient of 0.99, and was in good agreement with the field validation. This binary limestone map was further classified into oolitic (Samanasuk) and fossiliferous (Lockhart and Margalla) formations by all the four MLAs; in this case, RF surpassed all the other algorithms with an improved accuracy of 96.36%. This improvement can be attributed to better annotation, resulting in a binary limestone classification map, which formed a mask for improved classification of oolitic and fossiliferous limestone in the area.

Download Full-text

EXTRACTING BUILT-UP FEATURES IN COMPLEX BIOPHYSICAL ENVIRONMENTS BY USING A LANDSAT BANDS RATIO

ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences ◽

10.5194/isprs-archives-xliv-m-2-2020-79-2020 ◽

2020 ◽

Vol XLIV-M-2-2020 ◽

pp. 79-85

Author(s):

A. H. Ngandam Mfondoum ◽

P. G. Gbetkom ◽

R. Cooper ◽

S. Hakdaoui ◽

M. B. Mansour Badamassi

Keyword(s):

Remote Sensing ◽

Spatial Resolution ◽

Satellite Data ◽

Kappa Coefficient ◽

Landsat 8 ◽

Experimental Site ◽

Soil Features ◽

Mixed Pixels ◽

Shortwave Infrared ◽

Normalization Process

Abstract. This paper addresses the remote sensing challenging field of urban mixed pixels on a medium spatial resolution satellite data. The tentatively named Normalized Difference Built-up and Surroundings Unmixing Index (NDBSUI) is proposed by using Landsat-8 Operational Land Imager (OLI) bands. It uses the Shortwave Infrared 2 (SWIR2) as the main wavelength, the SWIR1 with the red wavelengths, for the built-up extraction. A ratio is computed based on the normalization process and the application is made on six cities with different urban and environmental characteristics. The built-up of the experimental site of Yaoundé is extracted with an overall accuracy of 95.51% and a kappa coefficient of 0.90. The NDBSUI is validated over five other sites, chosen according to Cameroon’s bioclimatic zoning. The results are satisfactory for the cities of Yokadouma and Kumba in the bimodal and monomodal rainfall zones, where overall accuracies are up to 98.9% and 97.5%, with kappa coefficients of 0.88 and 0.94 respectively, although these values are close to those of three other indices. However, in the cities of Foumban, Ngaoundéré and Garoua, representing the western highlands, the high Guinea savannah and the Sudano-sahelian zones where built-up is more confused with soil features, overall accuracies of 97.06%, 95.29% and 74.86%, corresponding to 0.918, 0.89 and 0.42 kappa coefficients were recorded. Difference of accuracy with EBBI, NDBI and UI are up to 31.66%, confirming the NDBSUI efficiency to automate built-up extraction and unmixing from surrounding noises with less biases.

Download Full-text

Using Remote Sensing to Monitor the Spring Phenology of Acadia National Park across Elevational Gradients

10.5194/bg-2019-126 ◽

2019 ◽

Author(s):

Yan Liu ◽

Caitlin McDonough MacKenzie ◽

Richard B. Primack ◽

Michael J. Hill ◽

Xiaoyang Zhang ◽

...

Keyword(s):

Remote Sensing ◽

Spatial Resolution ◽

National Park ◽

Vegetation Index ◽

Landsat 8 ◽

Mountainous Area ◽

Acadia National Park ◽

Fusion Model ◽

Elevational Gradients ◽

Spring Phenology

Abstract. Greenup dates of the mountainous Acadia National Park, were monitored using remote sensing data (including Landsat 8 surface reflectances (at a 30 m spatial resolution) and VIIRS reflectances adjusted to a nadir view (gridded at a 500 m spatial resolution)) during the 2013–2016 growing seasons. Ground-level leaf-out monitoring in the areas alongside the north-south-oriented hiking trails on three of the park's tallest mountains (466 m, 418 m, and 380 m) was used to evaluate satellite derived greenup dates in this study. While the 30 m resolution would be expected to provide a better scale for phenology detection in this mountainous region than the 500 m resolution, the daily temporal resolution of the 500 m data would be expected to offer vastly superior monitoring of the rapid variations experienced during vegetation greenup along elevational gradients. Therefore, the greenup dates derived from the Landsat 8 Enhanced Vegetation Index (EVI) data, augmented with Spatial and Temporal Adaptive Reflectance Fusion Model (STARFM) simulated EVI values, does provide more spatial details than VIIRS data alone and agree well with field monitored leaf out dates. Satellite derived greenup dates from the 30 m of Acadia National Park vary among different elevational zones, although the date of greenup is not always the most advanced at the lowest elevation. This indicates that the spring phenology is not only determined by microclimates associated with different elevations in this mountainous area, but is also possibly affected by the species mixture, localized temperatures, and other factors in Acadia.

Download Full-text

Assessment of the State of the Territories of Closed Waste Disposal Facilities by Vegetation Indices

Ecology and Industry of Russia ◽

10.18412/1816-0395-2021-9-30-37 ◽

2021 ◽

Vol 25 (9) ◽

pp. 30-37

Author(s):

N.N. Sliusar ◽

A.P. Belousova ◽

G.M. Batrakova ◽

R.D. Garifzyanov ◽

M. Huber-Humer ◽

...

Keyword(s):

Remote Sensing ◽

Waste Disposal ◽

Vegetation Cover ◽

Vegetation Index ◽

Vegetation Indices ◽

Cost Effective ◽

Google Earth ◽

The State ◽

Landsat 8 ◽

The Earth

The possibilities of using remote sensing of the Earth data to assess the formation of phytocenoses at reclaimed dumps and landfills are presented. The objects of study are landfills and dumps in the Perm Territory, which differed from each other in the types and timing of reclamation work. The state of the vegetation cover on the reclaimed and self-overgrowing objects was compared with the reference plots with naturally formed herbage of zonal meadow vegetation. The process of reclamation of the territory of closed landfills was assessed by the presence and homogeneity of the vegetation layer and by the values of the vegetation index NDVI. To identify the dynamics of changes in the vegetation cover, we used multi-temporal satellite images from the open resources of Google Earth and images in the visible and infrared ranges of the Landsat-5/TM and Landsat-8/OLI satellites. It is shown that the data of remote sensing of the Earth, in particular the analysis of vegetation indices, can be used to assess the dynamics of overgrowing of territories of reclaimed waste disposal facilities, as well as an additional and cost-effective method for monitoring the restoration of previously disturbed territories.

Download Full-text

Harmonizing Multi-Source Remote Sensing Images for Summer Corn Growth Monitoring

Remote Sensing ◽

10.3390/rs11111266 ◽

2019 ◽

Vol 11 (11) ◽

pp. 1266 ◽

Cited By ~ 3

Author(s):

Mingzheng Zhang ◽

Dehai Zhu ◽

Wei Su ◽

Jianxi Huang ◽

Xiaodong Zhang ◽

...

Keyword(s):

Remote Sensing ◽

Time Series ◽

Kalman Filter ◽

Spatial Resolution ◽

Temporal Resolution ◽

Meteorological Data ◽

High Temporal Resolution ◽

Growth Monitoring ◽

Landsat 8 ◽

Data Set

Continuous monitoring of crop growth status using time-series remote sensing image is essential for crop management and yield prediction. The growing season of summer corn in the North China Plain with the period of rain and hot, which makes the acquisition of cloud-free satellite imagery very difficult. Therefore, we focused on developing image datasets with both a high temporal resolution and medium spatial resolution by harmonizing the time-series of MOD09GA Normalized Difference Vegetation Index (NDVI) images and 30-m-resolution GF-1 WFV images using the improved Kalman filter model. The harmonized images, GF-1 images, and Landsat 8 images were then combined and used to monitor the summer corn growth from 5th June to 6th October, 2014, in three counties of Hebei Province, China, in conjunction with meteorological data and MODIS Evapotranspiration Data Set. The prediction residuals ( Δ P R K ) in NDVI between the GF-1 observations and the harmonized images was in the range of −0.2 to 0.2 with Gauss distribution. Moreover, the obtained phenological curves manifested distinctive growth features for summer corn at field scales. Changes in NDVI over time were more effectively evaluated and represented corn growth trends, when considered in conjunction with meteorological data and MODIS Evapotranspiration Data Set. We observed that the NDVI of summer corn showed a process of first decreasing and then rising in the early growing stage and discuss how the temperature and moisture of the environment changed with the growth stage. The study demonstrated that the synthesized dataset constructed using this methodology was highly accurate, with high temporal resolution and medium spatial resolution and it was possible to harmonize multi-source remote sensing imagery by the improved Kalman filter for long-term field monitoring.

Download Full-text

Bibliometric Analysis of Remote Sensing Research Trend in Crop Growth Monitoring: A Case Study in China

Remote Sensing ◽

10.3390/rs11070809 ◽

2019 ◽

Vol 11 (7) ◽

pp. 809 ◽

Cited By ~ 5

Author(s):

Lijuan Wang ◽

Guimin Zhang ◽

Ziyi Wang ◽

Jiangui Liu ◽

Jiali Shang ◽

...

Keyword(s):

Remote Sensing ◽

Vegetation Index ◽

Crop Growth ◽

Future Trend ◽

Current Status ◽

Research Trend ◽

Growth Monitoring ◽

Knowledge Mapping ◽

Area Index ◽

Quantitative Visualization

Remote sensing of crop growth monitoring is an important technique to guide agricultural production. To gain a comprehensive understanding of historical progression and current status, and future trend of remote sensing researches and applications in the field of crop growth monitoring in China, a study was carried out based on the publications from the past 20 years by Chinese scholars. Using the knowledge mapping software CiteSpace, a quantitative and qualitative analysis of research development, current hotspots, and future directions of crop growth monitoring using remote sensing technology in China was conducted. Furthermore, the relationship between high-frequency keywords and the emerging hot topics were visually analyzed. The results revealed that Chinese researchers paid more attention on keywords such as “vegetation index”, “crop growth”, “winter wheat”, “leaf area index (LAI)”, and “model” in the field of crop growth monitoring, and “LAI” and “unmanned aerial vehicle (UAV)”, appeared increasingly in frontier research of this discipline. Overall, bibliometric results from this CiteSpace-aided study provide a quantitative visualization to enrich our understanding on the historical development, current status, and future trend of crop growth monitoring in China.

Download Full-text

Garlic and Winter Wheat Identification Based on Active and Passive Satellite Imagery and the Google Earth Engine in Northern China

Remote Sensing ◽

10.3390/rs12213539 ◽

2020 ◽

Vol 12 (21) ◽

pp. 3539

Author(s):

Haifeng Tian ◽

Jie Pei ◽

Jianxi Huang ◽

Xuecao Li ◽

Jian Wang ◽

...

Keyword(s):

Remote Sensing ◽

Winter Wheat ◽

Satellite Imagery ◽

Remote Sensing Data ◽

Northern China ◽

Google Earth ◽

Kappa Coefficient ◽

Landsat 8 ◽

Winter Crops ◽

Sentinel 2

Garlic and winter wheat are major economic and grain crops in China, and their boundaries have increased substantially in recent decades. Updated and accurate garlic and winter wheat maps are critical for assessing their impacts on society and the environment. Remote sensing imagery can be used to monitor spatial and temporal changes in croplands such as winter wheat and maize. However, to our knowledge, few studies are focusing on garlic area mapping. Here, we proposed a method for coupling active and passive satellite imagery for the identification of both garlic and winter wheat in Northern China. First, we used passive satellite imagery (Sentinel-2 and Landsat-8 images) to extract winter crops (garlic and winter wheat) with high accuracy. Second, we applied active satellite imagery (Sentinel-1 images) to distinguish garlic from winter wheat. Third, we generated a map of the garlic and winter wheat by coupling the above two classification results. For the evaluation of classification, the overall accuracy was 95.97%, with a kappa coefficient of 0.94 by eighteen validation quadrats (3 km by 3 km). The user’s and producer’s accuracies of garlic are 95.83% and 95.85%, respectively; and for the winter wheat, these two accuracies are 97.20% and 97.45%, respectively. This study provides a practical exploration of targeted crop identification in mixed planting areas using multisource remote sensing data.

Download Full-text