scholarly journals Fast and Automatic Registration of Terrestrial Point Clouds Using 2D Line Features

2020 ◽  
Vol 12 (8) ◽  
pp. 1283 ◽  
Author(s):  
Wuyong Tao ◽  
Xianghong Hua ◽  
Zhiping Chen ◽  
Pengju Tian
Keyword(s):  
Point Cloud ◽  
Computation Time ◽  
Point Clouds ◽  
Experimental Results ◽  
Multiple Views ◽  
Automatic Method ◽  
Point Cloud Data ◽  
Automatic Registration ◽  
Cloud Data ◽  
Coarse Registration

Point cloud registration, as the first step for the use of point cloud data, has attracted increasing attention. In order to obtain the entire point cloud of a scene, the registration of point clouds from multiple views is necessary. In this paper, we propose an automatic method for the coarse registration of point clouds. The 2D lines are first extracted from the two point clouds being matched. Then, the line correspondences are established and the 2D transformation is calculated. Finally, a method is developed to calculate the displacement along the z-axis. With the 2D transformation and displacement, the 3D transformation can be easily achieved. Thus, the two point clouds are aligned together. The experimental results well demonstrate that our method can obtain high-precision registration results and is computationally very efficient. In the experimental results obtained by our method, the biggest rotation error is 0.5219o, and the biggest horizontal and vertical errors are 0.2319 m and 0.0119 m, respectively. The largest total computation time is only 713.4647 s.

scholarly journals ORIENTATION-BASED PAIRWISE COARSE REGISTRATION WITH MARKERLESS TERRESTRIAL LASER SCANS

2019 ◽  
Vol XLII-4/W16 ◽  
pp. 425-432
Author(s):  
S. N. Mohd Isa ◽  
S. A. Abdul Shukor ◽  
N. A. Rahim ◽  
I. Maarof ◽  
Z. R. Yahya ◽  
...  
Keyword(s):  
Point Cloud ◽  
Processing Time ◽  
Point Clouds ◽  
Relative Orientation ◽  
Point Cloud Data ◽  
Data Set ◽  
Cloud Data ◽  
Overlapping Data ◽  
Coarse Registration ◽  
Voxel Grid

Abstract. In this paper, pairwise coarse registration is presented using real world point cloud data obtained by terrestrial laser scanner and without information on reference marker on the scene. The challenge in the data is because of multi-scanning which caused large data size in millions of points due to limited range about the scene generated from side view. Furthermore, the data have a low percentage of overlapping between two scans, and the point cloud data were acquired from structures with geometrical symmetry which leads to minimal transformation during registration process. To process the data, 3D Harris keypoint is used and coarse registration is done by Iterative Closest Point (ICP). Different sampling methods were applied in order to evaluate processing time for further analysis on different voxel grid size. Then, Root Means Squared Error (RMSE) is used to determine the accuracy of the approach and to study its relation to relative orientation of scan by pairwise registration. The results show that the grid average downsampling method gives shorter processing time with reasonable RMSE in finding the exact scan pair. It can also be seen that grid step size is having an inverse relationship with downsampling points. This setting is used to test on smaller overlapping data set of other heritage building. Evaluation on relative orientation is studied from transformation parameter for both data set, where Data set I, which higher overlapping data gives better accuracy which may be due to the small distance between the two point clouds compared to Data set II.

scholarly journals An Efficient Approach to Automatic Construction of 3D Watertight Geometry of Buildings Using Point Clouds

2021 ◽  
Vol 13 (10) ◽  
pp. 1947
Author(s):  
Yuanzhi Cai ◽  
Lei Fan
Keyword(s):  
Point Cloud ◽  
Geometric Model ◽  
Computation Time ◽  
Point Clouds ◽  
3D Models ◽  
Ray Casting ◽  
Point Cloud Data ◽  
Geometric Models ◽  
Cloud Data ◽  
Reconstruction Methods

Recent years have witnessed an increasing use of 3D models in general and 3D geometric models specifically of built environment for various applications, owing to the advancement of mapping techniques for accurate 3D information. Depending on the application scenarios, there exist various types of approaches to automate the construction of 3D building geometry. However, in those studies, less attention has been paid to watertight geometries derived from point cloud data, which are of use to the management and the simulations of building energy. To this end, an efficient reconstruction approach was introduced in this study and involves the following key steps. The point cloud data are first voxelised for the ray-casting analysis to obtain the 3D indoor space. By projecting it onto a horizontal plane, an image representing the indoor area is obtained and is used for the room segmentation. The 2D boundary of each room candidate is extracted using new grammar rules and is extruded using the room height to generate 3D models of individual room candidates. The room connection analyses are applied to the individual models obtained to determine the locations of doors and the topological relations between adjacent room candidates for forming an integrated and watertight geometric model. The approach proposed was tested using the point cloud data representing six building sites of distinct spatial confirmations of rooms, corridors and openings. The experimental results showed that accurate watertight building geometries were successfully created. The average differences between the point cloud data and the geometric models obtained were found to range from 12 to 21 mm. The maximum computation time taken was less than 5 min for the point cloud of approximately 469 million data points, more efficient than the typical reconstruction methods in the literature.

Registration and Fusion of UAV LiDAR System Sequence Images and Laser Point Clouds

2020 ◽  
Author(s):  
Jiayong Yu ◽  
Longchen Ma ◽  
Maoyi Tian, ◽  
Xiushan Lu
Keyword(s):  
Point Cloud ◽  
Image Data ◽  
Point Clouds ◽  
Optical Image ◽  
Point Cloud Data ◽  
Feature Points ◽  
Lidar System ◽  
Registration Accuracy ◽  
Cloud Data ◽  
Intensity Image

The unmanned aerial vehicle (UAV)-mounted mobile LiDAR system (ULS) is widely used for geomatics owing to its efficient data acquisition and convenient operation. However, due to limited carrying capacity of a UAV, sensors integrated in the ULS should be small and lightweight, which results in decrease in the density of the collected scanning points. This affects registration between image data and point cloud data. To address this issue, the authors propose a method for registering and fusing ULS sequence images and laser point clouds, wherein they convert the problem of registering point cloud data and image data into a problem of matching feature points between the two images. First, a point cloud is selected to produce an intensity image. Subsequently, the corresponding feature points of the intensity image and the optical image are matched, and exterior orientation parameters are solved using a collinear equation based on image position and orientation. Finally, the sequence images are fused with the laser point cloud, based on the Global Navigation Satellite System (GNSS) time index of the optical image, to generate a true color point cloud. The experimental results show the higher registration accuracy and fusion speed of the proposed method, thereby demonstrating its accuracy and effectiveness.

scholarly journals Multi-Dimensional Underwater Point Cloud Detection Based on Deep Learning

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 884
Author(s):  
Chia-Ming Tsai ◽  
Yi-Horng Lai ◽  
Yung-Da Sun ◽  
Yu-Jen Chung ◽  
Jau-Woei Perng
Keyword(s):  
Deep Learning ◽  
Point Cloud ◽  
Three Dimensional ◽  
Point Clouds ◽  
Training Data ◽  
Network Architectures ◽  
Point Cloud Data ◽  
Data Types ◽  
Raw Data ◽  
Cloud Data

Numerous sensors can obtain images or point cloud data on land, however, the rapid attenuation of electromagnetic signals and the lack of light in water have been observed to restrict sensing functions. This study expands the utilization of two- and three-dimensional detection technologies in underwater applications to detect abandoned tires. A three-dimensional acoustic sensor, the BV5000, is used in this study to collect underwater point cloud data. Some pre-processing steps are proposed to remove noise and the seabed from raw data. Point clouds are then processed to obtain two data types: a 2D image and a 3D point cloud. Deep learning methods with different dimensions are used to train the models. In the two-dimensional method, the point cloud is transferred into a bird’s eye view image. The Faster R-CNN and YOLOv3 network architectures are used to detect tires. Meanwhile, in the three-dimensional method, the point cloud associated with a tire is cut out from the raw data and is used as training data. The PointNet and PointConv network architectures are then used for tire classification. The results show that both approaches provide good accuracy.

scholarly journals VISUALIZATION OF THE CONSTRUCTION OF ANCIENT ROMAN BUILDINGS IN OSTIA USING POINT CLOUD DATA

2017 ◽  
Vol XLII-2/W3 ◽  
pp. 345-352
Author(s):  
Y. Hori ◽  
T. Ogawa
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Feature Matching ◽  
Three Dimensional ◽  
Point Clouds ◽  
Final Report ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Coverage Accuracy ◽  
New Research

The implementation of laser scanning in the field of archaeology provides us with an entirely new dimension in research and surveying. It allows us to digitally recreate individual objects, or entire cities, using millions of three-dimensional points grouped together in what is referred to as "point clouds". In addition, the visualization of the point cloud data, which can be used in the final report by archaeologists and architects, should usually be produced as a JPG or TIFF file. Not only the visualization of point cloud data, but also re-examination of older data and new survey of the construction of Roman building applying remote-sensing technology for precise and detailed measurements afford new information that may lead to revising drawings of ancient buildings which had been adduced as evidence without any consideration of a degree of accuracy, and finally can provide new research of ancient buildings. We used laser scanners at fields because of its speed, comprehensive coverage, accuracy and flexibility of data manipulation. Therefore, we “skipped” many of post-processing and focused on the images created from the meta-data simply aligned using a tool which extended automatic feature-matching algorithm and a popular renderer that can provide graphic results.

scholarly journals Modeling and Processing of Smart Point Clouds of Cultural Relics with Complex Geometries

2021 ◽  
Vol 10 (9) ◽  
pp. 617
Author(s):  
Su Yang ◽  
Miaole Hou ◽  
Ahmed Shaker ◽  
Songnian Li
Keyword(s):  
Point Cloud ◽  
Semantic Information ◽  
Point Clouds ◽  
Information Modeling ◽  
Complex Geometries ◽  
3D Point Cloud ◽  
Point Cloud Data ◽  
Modeling Framework ◽  
Cloud Data ◽  
Cultural Relics

The digital documentation of cultural relics plays an important role in archiving, protection, and management. In the field of cultural heritage, three-dimensional (3D) point cloud data is effective at expressing complex geometric structures and geometric details on the surface of cultural relics, but lacks semantic information. To elaborate the geometric information of cultural relics and add meaningful semantic information, we propose a modeling and processing method of smart point clouds of cultural relics with complex geometries. An information modeling framework for complex geometric cultural relics was designed based on the concept of smart point clouds, in which 3D point cloud data are organized through the time dimension and different spatial scales indicating different geometric details. The proposed model allows smart point clouds or a subset to be linked with semantic information or related documents. As such, this novel information modeling framework can be used to describe rich semantic information and high-level details of geometry. The proposed information model not only expresses the complex geometric structure of the cultural relics and the geometric details on the surface, but also has rich semantic information, and can even be associated with documents. A case study of the Dazu Thousand-Hand Bodhisattva Statue, which is characterized by a variety of complex geometries, reveals that our proposed framework is capable of modeling and processing the statue with excellent applicability and expansibility. This work provides insights into the sustainable development of cultural heritage protection globally.

Registration and Fusion of UAV LiDAR System Sequence Images and Laser Point Clouds

2021 ◽  
Vol 65 (1) ◽  
pp. 10501-1-10501-9
Author(s):  
Jiayong Yu ◽  
Longchen Ma ◽  
Maoyi Tian ◽  
Xiushan Lu
Keyword(s):  
Point Cloud ◽  
Image Data ◽  
Point Clouds ◽  
Optical Image ◽  
Point Cloud Data ◽  
Feature Points ◽  
Lidar System ◽  
Registration Accuracy ◽  
Cloud Data ◽  
Intensity Image

Abstract The unmanned aerial vehicle (UAV)-mounted mobile LiDAR system (ULS) is widely used for geomatics owing to its efficient data acquisition and convenient operation. However, due to limited carrying capacity of a UAV, sensors integrated in the ULS should be small and lightweight, which results in decrease in the density of the collected scanning points. This affects registration between image data and point cloud data. To address this issue, the authors propose a method for registering and fusing ULS sequence images and laser point clouds, wherein they convert the problem of registering point cloud data and image data into a problem of matching feature points between the two images. First, a point cloud is selected to produce an intensity image. Subsequently, the corresponding feature points of the intensity image and the optical image are matched, and exterior orientation parameters are solved using a collinear equation based on image position and orientation. Finally, the sequence images are fused with the laser point cloud, based on the Global Navigation Satellite System (GNSS) time index of the optical image, to generate a true color point cloud. The experimental results show the higher registration accuracy and fusion speed of the proposed method, thereby demonstrating its accuracy and effectiveness.

scholarly journals A Simple Semantic-Based Data Storage Layout for Querying Point Clouds

2020 ◽  
Vol 9 (2) ◽  
pp. 72 ◽  
Author(s):  
Sami El-Mahgary ◽  
Juho-Pekka Virtanen ◽  
Hannu Hyyppä
Keyword(s):  
Data Storage ◽  
Point Cloud ◽  
Point Clouds ◽  
Database Management System ◽  
Programming Approach ◽  
Point Cloud Data ◽  
Data Layout ◽  
Cloud Data ◽  
Semantic Point ◽  
Relational Database Management

The importance of being able to separate the semantics from the actual (X,Y,Z) coordinates in a point cloud has been actively brought up in recent research. However, there is still no widely used or accepted data layout paradigm on how to efficiently store and manage such semantic point cloud data. In this paper, we present a simple data layout that makes use the semantics and that allows for quick queries. The underlying idea is especially suited for a programming approach (e.g., queries programmed via Python) but we also present an even simpler implementation of the underlying technique on a well known relational database management system (RDBMS), namely, PostgreSQL. The obtained query results suggest that the presented approach can be successfully used to handle point and range queries on large points clouds.

scholarly journals Topology Reconstruction of BIM Wall Objects from Point Cloud Data

2020 ◽  
Vol 12 (11) ◽  
pp. 1800 ◽  
Author(s):  
Maarten Bassier ◽  
Maarten Vergauwen
Keyword(s):  
Point Cloud ◽  
Point Clouds ◽  
Evaluation Framework ◽  
Information Modeling ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Current State ◽  
Building Information ◽  
Popular Subject ◽  
Best Fit

The processing of remote sensing measurements to Building Information Modeling (BIM) is a popular subject in current literature. An important step in the process is the enrichment of the geometry with the topology of the wall observations to create a logical model. However, this remains an unsolved task as methods struggle to deal with the noise, incompleteness and the complexity of point cloud data of building scenes. Current methods impose severe abstractions such as Manhattan-world assumptions and single-story procedures to overcome these obstacles, but as a result, a general data processing approach is still missing. In this paper, we propose a method that solves these shortcomings and creates a logical BIM model in an unsupervised manner. More specifically, we propose a connection evaluation framework that takes as input a set of preprocessed point clouds of a building’s wall observations and compute the best fit topology between them. We transcend the current state of the art by processing point clouds of both straight, curved and polyline-based walls. Also, we consider multiple connection types in a novel reasoning framework that decides which operations are best fit to reconstruct the topology of the walls. The geometry and topology produced by our method is directly usable by BIM processes as it is structured conform the IFC data structure. The experimental results conducted on the Stanford 2D-3D-Semantics dataset (2D-3D-S) show that the proposed method is a promising framework to reconstruct complex multi-story wall elements in an unsupervised manner.

scholarly journals IFCWALL RECONSTRUCTION FROM UNSTRUCTURED POINT CLOUDS

2018 ◽  
Vol IV-2 ◽  
pp. 33-39 ◽  
Author(s):  
M. Bassier ◽  
R. Klein ◽  
B. Van Genechten ◽  
M. Vergauwen
Keyword(s):  
Point Cloud ◽  
Input Data ◽  
Initial Point ◽  
Point Clouds ◽  
Information Modeling ◽  
Point Cloud Data ◽  
Ongoing Research ◽  
Cloud Data ◽  
Building Information ◽  
Wall Geometry

The automated reconstruction of Building Information Modeling (BIM) objects from point cloud data is still ongoing research. A key aspect is the creation of accurate wall geometry as it forms the basis for further reconstruction of objects in a BIM. After segmenting and classifying the initial point cloud, the labelled segments are processed and the wall topology is reconstructed. However, the preocedure is challenging due to noise, occlusions and the complexity of the input data.<br>In this work, a method is presented to automatically reconstruct consistent wall geometry from point clouds. More specifically, the use of room information is proposed to aid the wall topology creation. First, a set of partial walls is constructed based on classified planar primitives. Next, the rooms are identified using the retrieved wall information along with the floors and ceilings. The wall topology is computed by the intersection of the partial walls conditioned on the room information. The final wall geometry is defined by creating IfcWallStandardCase objects conform the IFC4 standard. The result is a set of walls according to the as-built conditions of a building. The experiments prove that the used method is a reliable framework for wall reconstruction from unstructured point cloud data. Also, the implementation of room information reduces the rate of false positives for the wall topology. Given the walls, ceilings and floors, 94% of the rooms is correctly identified. A key advantage of the proposed method is that it deals with complex rooms and is not bound to single storeys.

Sign in / Sign up

Export Citation Format

Share Document