scholarly journals A Novel Classification Extension-Based Cloud Detection Method for Medium-Resolution Optical Images

2020 ◽  
Vol 12 (15) ◽  
pp. 2365
Author(s):  
Xidong Chen ◽  
Liangyun Liu ◽  
Yuan Gao ◽  
Xiao Zhang ◽  
Shuai Xie
Keyword(s):  
Satellite Imagery ◽  
Landsat 8 ◽  
Cloud Detection ◽  
Low Resolution ◽  
Spectral Bands ◽  
Optical Images ◽  
Medium Resolution ◽  
Training Samples ◽  
Land Surfaces ◽  
Sentinel 2

Accurate cloud detection using medium-resolution multispectral satellite imagery (such as Landsat and Sentinel data) is always difficult due to the complex land surfaces, diverse cloud types, and limited number of available spectral bands, especially in the case of images without thermal bands. In this paper, a novel classification extension-based cloud detection (CECD) method was proposed for masking clouds in the medium-resolution images. The new method does not rely on thermal bands and can be used for masking clouds in different types of medium-resolution satellite imagery. First, with the support of low-resolution satellite imagery with short revisit periods, cloud and non-cloud pixels were identified in the resampled low-resolution version of the medium-resolution cloudy image. Then, based on the identified cloud and non-cloud pixels and the resampled cloudy image, training samples were automatically collected to develop a random forest (RF) classifier. Finally, the developed RF classifier was extended to the corresponding medium-resolution cloudy image to generate an accurate cloud mask. The CECD method was applied to Landsat-8 and Sentinel-2 imagery to test the performance for different satellite images, and the well-known function of mask (FMASK) method was employed for comparison with our method. The results indicate that CECD is more accurate at detecting clouds in Landsat-8 and Sentinel-2 imagery, giving an average F-measure value of 97.65% and 97.11% for Landsat-8 and Sentinel-2 imagery, respectively, as against corresponding results of 90.80% and 88.47% for FMASK. It is concluded, therefore, that the proposed CECD algorithm is an effective cloud-classification algorithm that can be applied to the medium-resolution optical satellite imagery.

scholarly journals A Novel GIS-Based Approach for Automated Detection of Nearshore Sandbar Morphological Characteristics in Optical Satellite Imagery

2021 ◽  
Vol 13 (11) ◽  
pp. 2233
Author(s):  
Rasa Janušaitė ◽  
Laurynas Jukna ◽  
Darius Jarmalavičius ◽  
Donatas Pupienis ◽  
Gintautas Žilinskas
Keyword(s):  
Satellite Imagery ◽  
Morphological Characteristics ◽  
Unsupervised Classification ◽  
Landsat 8 ◽  
Multi Scale ◽  
Medium Resolution ◽  
Wide Range ◽  
Position Index ◽  
Local Relief ◽  
Length Width

Satellite remote sensing is a valuable tool for coastal management, enabling the possibility to repeatedly observe nearshore sandbars. However, a lack of methodological approaches for sandbar detection prevents the wider use of satellite data in sandbar studies. In this paper, a novel fully automated approach to extract nearshore sandbars in high–medium-resolution satellite imagery using a GIS-based algorithm is proposed. The method is composed of a multi-step workflow providing a wide range of data with morphological nearshore characteristics, which include nearshore local relief, extracted sandbars, their crests and shoreline. The proposed processing chain involves a combination of spectral indices, ISODATA unsupervised classification, multi-scale Relative Bathymetric Position Index (RBPI), criteria-based selection operations, spatial statistics and filtering. The algorithm has been tested with 145 dates of PlanetScope and RapidEye imagery using a case study of the complex multiple sandbar system on the Curonian Spit coast, Baltic Sea. The comparison of results against 4 years of in situ bathymetric surveys shows a strong agreement between measured and derived sandbar crest positions (R2 = 0.999 and 0.997) with an average RMSE of 5.8 and 7 m for PlanetScope and RapidEye sensors, respectively. The accuracy of the proposed approach implies its feasibility to study inter-annual and seasonal sandbar behaviour and short-term changes related to high-impact events. Algorithm-provided outputs enable the possibility to evaluate a range of sandbar characteristics such as distance from shoreline, length, width, count or shape at a relevant spatiotemporal scale. The design of the method determines its compatibility with most sandbar morphologies and suitability to other sandy nearshores. Tests of the described technique with Sentinel-2 MSI and Landsat-8 OLI data show that it can be applied to publicly available medium resolution satellite imagery of other sensors.

scholarly journals Influence of Different Satellite Imagery on the Analysis of Riparian Leaf Density in a Mountain Stream

2020 ◽  
Vol 12 (20) ◽  
pp. 3376 ◽  
Author(s):  
Giovanni Romano ◽  
Giovanni Francesco Ricci ◽  
Francesco Gentile
Keyword(s):  
Winter Wheat ◽  
Satellite Imagery ◽  
Vegetation Cover ◽  
Riparian Vegetation ◽  
Deciduous Forests ◽  
Sensor Data ◽  
Mountain Stream ◽  
Landsat 8 ◽  
Area Index ◽  
Sentinel 2

In recent decades, technological advancements in sensors have generated increasing interest in remote sensing data for the study of vegetation features. Image pixel resolution can affect data analysis and results. This study evaluated the potential of three satellite images of differing resolution (Landsat 8, 30 m; Sentinel-2, 10 m; and Pleiades 1A, 2 m) in assessing the Leaf Area Index (LAI) of riparian vegetation in two Mediterranean streams, and in both a winter wheat field and a deciduous forest used to compare the accuracy of the results. In this study, three different retrieval methods—the Caraux-Garson, the Lambert-Beer, and the Campbell and Norman equations—are used to estimate LAI from the Normalized Difference Vegetation Index (NDVI). To validate sensor data, LAI values were measured in the field using the LAI 2200 Plant Canopy Analyzer. The statistical indices showed a better performance for Pleiades 1A and Landsat 8 images, the former particularly in sites characterized by high canopy closure, such as deciduous forests, or in areas with stable riparian vegetation, the latter where stable reaches of riparian vegetation cover are almost absent or very homogenous, as in winter wheat fields. Sentinel-2 images provided more accurate results in terms of the range of LAI values. Considering the different types of satellite imagery, the Lambert-Beer equation generally performed best in estimating LAI from the NDVI, especially in areas that are geomorphologically stable or have a denser vegetation cover, such as deciduous forests.

scholarly journals Garlic and Winter Wheat Identification Based on Active and Passive Satellite Imagery and the Google Earth Engine in Northern China

2020 ◽  
Vol 12 (21) ◽  
pp. 3539
Author(s):  
Haifeng Tian ◽  
Jie Pei ◽  
Jianxi Huang ◽  
Xuecao Li ◽  
Jian Wang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Winter Wheat ◽  
Satellite Imagery ◽  
Remote Sensing Data ◽  
Northern China ◽  
Google Earth ◽  
Kappa Coefficient ◽  
Landsat 8 ◽  
Winter Crops ◽  
Sentinel 2

Garlic and winter wheat are major economic and grain crops in China, and their boundaries have increased substantially in recent decades. Updated and accurate garlic and winter wheat maps are critical for assessing their impacts on society and the environment. Remote sensing imagery can be used to monitor spatial and temporal changes in croplands such as winter wheat and maize. However, to our knowledge, few studies are focusing on garlic area mapping. Here, we proposed a method for coupling active and passive satellite imagery for the identification of both garlic and winter wheat in Northern China. First, we used passive satellite imagery (Sentinel-2 and Landsat-8 images) to extract winter crops (garlic and winter wheat) with high accuracy. Second, we applied active satellite imagery (Sentinel-1 images) to distinguish garlic from winter wheat. Third, we generated a map of the garlic and winter wheat by coupling the above two classification results. For the evaluation of classification, the overall accuracy was 95.97%, with a kappa coefficient of 0.94 by eighteen validation quadrats (3 km by 3 km). The user’s and producer’s accuracies of garlic are 95.83% and 95.85%, respectively; and for the winter wheat, these two accuracies are 97.20% and 97.45%, respectively. This study provides a practical exploration of targeted crop identification in mixed planting areas using multisource remote sensing data.

scholarly journals Contribution of Sentinel-2 data for applications in vegetation monitoring

ACTA IMEKO ◽  
2016 ◽  
Vol 5 (2) ◽  
pp. 44 ◽  
Author(s):  
Pia Addabbo ◽  
Mariano Focareta ◽  
Salvo Marcuccio ◽  
Claudio Votto ◽  
Silvia Liberata Ullo
Keyword(s):  
Added Value ◽  
Landsat 8 ◽  
Vegetation Monitoring ◽  
Multispectral Data ◽  
Monitoring Applications ◽  
Green Areas ◽  
Land Surfaces ◽  
Project Data ◽  
Different Sources ◽  
Sentinel 2

<p class="Abstract"><span lang="EN-US">With the entry into operation of the Sentinel-2 mission in June 2015, a new land monitoring costellation of twin satellites has been added to Copernicus project from ESA and new insights have been derived through the combination of Sentinel-2 data with other optical/multispectral data, and with other data from satellites belonging to the same Copernicus  project.  To this end, the objective of this paper has been to present new added-value tools first through the integration of different satellite platforms: data from NASA Landsat-8 and ESA Sentinel-1 have been used and combined, and furthermore through the comparison of satellite data all from the same Copernicus project: data from Sentinel-1 and Sentinel-2 have been jointly processed and compared. Although data from optical/multispectral sensors, as those of Landsat-8 and Sentinel-2, and data from SAR on board of Sentinel-1,  are very different,  their combination provides useful and interesting results. The integration and combination of these data can find useful application in many fields from oceans to waterways, from land surfaces to fossil deposits, from vegetation to forest areas. In this works authors have focused their interest in green areas and vegetation monitoring applications, by choosing as case of interest the Royal Palace of Caserta and its gardens.  The idea has started from the increasing interest in monitoring  the cultural heritage monuments and in particular  the surrounding vegetation with the green areas and the parks inside. Satellite images can put into evidence boundaries modifications, the vegetation state, their possible degradation, and other phenomena such as changes in the territories due both to natural and to anthropogenic causes. Data combination from different sources as above specified gives a good number of indexes very useful to analyze the vegetation state and its health in a very deep way. Many of these indexes have been calculated and discussed for investigation.</span></p>

scholarly journals BURNT AREA DETECTION USING MEDIUM RESOLUTION SENTINEL 2 AND LANDSAT 8 SATELLITES

2020 ◽  
Vol XLIII-B5-2020 ◽  
pp. 131-137
Author(s):  
D. Ongeri ◽  
B. K. Kenduiywo
Keyword(s):  
Forest Disturbance ◽  
Hot Spot ◽  
Google Earth ◽  
Landsat 8 ◽  
Burnt Area ◽  
Resource Management System ◽  
Medium Resolution ◽  
The Difference ◽  
Fire Information ◽  
Sentinel 2

Abstract. Forest fire is one of the most serious environmental problems in Kenya that influences human activities, climate change and biodiversity. The main goal of this study is to apply medium resolution sensors (Landsat 8 OLI and Sentinel 2 MSI) to produce burnt area severity maps that will include small fires (< 100 ha) in order to improve burnt area detection and mapping in Kenya. Normalized burnt area indices were generated for specified pre- and post-fire periods. The difference between pre- and post-fire Normalized Burnt Ration (NBR) was used to compute δNBR index depicting forest disturbance by fire events. Thresholded classes were derived from the computed δNBR indices to obtain burnt severity maps. The spatial and temporal agreements of the Burnt area detection dates were validated by comparing against the MODIS MCD641 500 m products and MODIS Fire Information for Resource Management System (FIRMS) 1 km daily product hot-spot acquisition dates. This approach was implemented on Google Earth Engine (GEE) platform with a simple user interface that allows users to auto-generate burnt area maps and statistics. The operational GEE application developed can be used to obtain burnt area severity maps and statistics that allow for initial accurate approximation of fire damage.

scholarly journals Cloud Detection Algorithm for Multi-Satellite Remote Sensing Imagery Based on a Spectral Library and 1D Convolutional Neural Network

2021 ◽  
Vol 13 (16) ◽  
pp. 3319
Author(s):  
Nan Ma ◽  
Lin Sun ◽  
Chenghu Zhou ◽  
Yawen He
Keyword(s):  
Neural Network ◽  
Remote Sensing ◽  
Satellite Images ◽  
Detection Algorithm ◽  
Landsat 8 ◽  
Cloud Detection ◽  
Spectral Library ◽  
Remote Sensing Images ◽  
Different Types ◽  
Sentinel 2

Automatic cloud detection in remote sensing images is of great significance. Deep-learning-based methods can achieve cloud detection with high accuracy; however, network training heavily relies on a large number of labels. Manually labelling pixel-wise level cloud and non-cloud annotations for many remote sensing images is laborious and requires expert-level knowledge. Different types of satellite images cannot share a set of training data, due to the difference in spectral range and spatial resolution between them. Hence, labelled samples in each upcoming satellite image are required to train a new deep-learning-based model. In order to overcome such a limitation, a novel cloud detection algorithm based on a spectral library and convolutional neural network (CD-SLCNN) was proposed in this paper. In this method, the residual learning and one-dimensional CNN (Res-1D-CNN) was used to accurately capture the spectral information of the pixels based on the prior spectral library, effectively preventing errors due to the uncertainties in thin clouds, broken clouds, and clear-sky pixels during remote sensing interpretation. Benefiting from data simulation, the method is suitable for the cloud detection of different types of multispectral data. A total of 62 Landsat-8 Operational Land Imagers (OLI), 25 Moderate Resolution Imaging Spectroradiometers (MODIS), and 20 Sentinel-2 satellite images acquired at different times and over different types of underlying surfaces, such as a high vegetation coverage, urban area, bare soil, water, and mountains, were used for cloud detection validation and quantitative analysis, and the cloud detection results were compared with the results from the function of the mask, MODIS cloud mask, support vector machine, and random forest. The comparison revealed that the CD-SLCNN method achieved the best performance, with a higher overall accuracy (95.6%, 95.36%, 94.27%) and mean intersection over union (77.82%, 77.94%, 77.23%) on the Landsat-8 OLI, MODIS, and Sentinel-2 data, respectively. The CD-SLCNN algorithm produced consistent results with a more accurate cloud contour on thick, thin, and broken clouds over a diverse underlying surface, and had a stable performance regarding bright surfaces, such as buildings, ice, and snow.

scholarly journals The estimation model of mangrove forest biomass using a medium resolution satellite imagery in the concession area of forest consession company in West Kalimantan

2016 ◽  
Vol 6 (2) ◽  
pp. 69-81
Author(s):  
SENDI YUSANDI ◽  
I NENGAH SURATI JAYA
Keyword(s):  
Satellite Imagery ◽  
Mangrove Forest ◽  
Forest Biomass ◽  
Accurate Estimation ◽  
Biomass Estimation ◽  
Mean Deviation ◽  
Landsat 8 ◽  
Estimation Model ◽  
West Kalimantan ◽  
Medium Resolution

Yusandi S, Jaya INS. 2016. The estimation model of mangrove forest biomass using a medium resolution satellite imagery in the concession area of forest consession company in West Kalimantan. Bonorowo Wetlands 6: 69-81. Mangrove forest is one of forest ecosystem types having the highest carbon stock in the tropics. Mangrove forests have a good assimilation capability with their environmental elements as well as have a high capability on carbon sequestration. Up to now, however, the availability of data and information on carbon storage, especially on tree biomass content of mangrove is still limited. Conventionally, an accurate estimation of biomass could be obtained from terrestrial measurements, but those methods costly and time-consuming. This study offered an alternative solution to overcome these limitations by using remote sensing technology, i.e., by using the moderate resolution imageries Landsat 8. The objective of this study is to formulate the biomass estimation model using medium resolution satellite imagery, as well as to develop a biomass distribution map based on the selected model. The study found that the NDVI has a considerably high correlation coefficient of larger than > 0.7071 with the stand biomass. On the basis of the values of aggregation deviation, mean deviation, bias, RMSE, χ², R², and s, the best model for estimating the mangrove stand biomass is B=0.00023404 with the R² value of 77.1%. In general, the concession area of BSN Group (PT Kandelia Alam Semesta and PT Bina Ovivipari) have the potential of biomass ranging from 45 to 100 ton per ha.

scholarly journals A development of the Enhanced Built-up and Bareness Index (EBBI) based on combination of multi-resolution Landsat 8 and Sentinel 2 MSI images

2021 ◽  
Vol 62 (1) ◽  
pp. 1-9
Author(s):  
Hung Le Trinh ◽  
Ha Thu Thi Le ◽  
Loc Duc Le ◽  
Long Thanh Nguyen ◽  
Keyword(s):  
Land Cover ◽  
Satellite Imagery ◽  
Near Infrared ◽  
Urban Land ◽  
Urban Land Use ◽  
Landsat 8 ◽  
Infrared Band ◽  
Bare Land ◽  
Sentinel 2

Classification of built-up land and bare land on remote sensing images is a very difficult problem due to the complexity of the urban land cover. Several urban indices have been proposed to improve the accuracy in classifying urban land use/land cover from optical satellite imagery. This paper presents an development of the EBBI (Enhanced Built-up and Bareness Index) index based on the combination of Landsat 8 and Sentinel 2 multi-resolution satellite imagery. Near infrared band (band 8a), short wave infrared band (band 11) of Sentinel 2 MSI image and thermal infrared band (band 10) Landsat 8 image were used to calculate EBBI index. The results obtained show that the combination of Landsat 8 and Sentinel 2 satellite images improves the spatial resolution of EBBI index image, thereby improving the accuracy of classification of bare land and built-up land by about 5% compared with the case using only Landsat 8 images.

scholarly journals High-frequency monitoring of anomalous methane point sources with multispectral Sentinel-2 satellite observations

2020 ◽  
Author(s):  
Daniel J. Varon ◽  
Dylan Jervis ◽  
Jason McKeever ◽  
Ian Spence ◽  
David Gains ◽  
...  
Keyword(s):  
Point Source ◽  
High Frequency ◽  
Point Sources ◽  
Oil Field ◽  
Satellite Observations ◽  
Landsat 8 ◽  
Pixel Resolution ◽  
Spectral Bands ◽  
Frequency Monitoring ◽  
Sentinel 2

Abstract. We demonstrate the capability of the Sentinel-2 MultiSpectral satellite Instrument (MSI) to detect and quantify large methane point sources with fine pixel resolution (20 m) and rapid revisit rates (2–5 days). We present three methane column retrieval methods that use shortwave infrared (SWIR) measurements from MSI spectral bands 11 (~1560–1660 nm) and 12 (~2090–2290 nm) to detect atmospheric methane plumes. The most successful is the multi-band/multi-pass (MBMP) method, which uses a combination of the two bands and a non-plume control observation to retrieve methane columns. The MBMP method can quantify point sources down to about 3 t h−1 with precision of ~30 %–90 % (1σ) over favourable (quasi-homogeneous) surfaces. We applied our methods to perform high-frequency monitoring of strong methane point source plumes from a well-pad device in the Hassi Messaoud oil field of Algeria (October 2019 to August 2020, observed every 2.5 days) and from a compressor station in the Korpezhe oil/gas field of Turkmenistan (August 2015 to November 2020, observed every 5 days). The Algerian source was detected in 93 % of cloud-free scenes, with source rates ranging from 2.6 to 51.9 t h−1 (averaging 9.3 t h−1) until it was shut down by a flare lit in August 2020. The Turkmen source was detected in 40 % of cloud-free scenes, with variable intermittency and a 9-month shutdown period in March-December 2019 before it resumed; source rates ranged from 3.5 to 92.9 t h−1 (averaging 20.5 t h−1). Our source rate retrievals for the Korpezhe point source are in close agreement with GHGSat-D satellite observations for February 2018 to January 2019, but provide much higher observation density. Our methods can be readily applied to other satellite instruments with coarse SWIR spectral bands, such as Landsat-7 and Landsat-8. High-frequency satellite-based detection of anomalous methane point sources as demonstrated here could enable prompt corrective action to help reduce global methane emissions.

Sign in / Sign up

Export Citation Format

Share Document