scholarly journals Mapping of Aluminum Concentration in Bauxite Mining Residues Using Sentinel-2 Imagery

2021 ◽  
Vol 13 (8) ◽  
pp. 1517
Author(s):  
Sara Kasmaeeyazdi ◽  
Emanuele Mandanici ◽  
Efthymios Balomenos ◽  
Francesco Tinti ◽  
Stefano Bonduà ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Spectral Band ◽  
Bauxite Residue ◽  
Estimation Method ◽  
Aluminum Concentration ◽  
Validation Data ◽  
Simulation Results ◽  
Kriging Estimation ◽  
Mining Residues ◽  
Sentinel 2

There is a growing interest in the characterization of mining residues, both for environmental assessments and critical raw materials recovery. The lack of sufficient in situ samples hampers an effective geostatistical modelling of material concentrations variability. This paper proposes a method to characterize the aluminum spatial variability in a mine residue from remote sensing data and imprecise information from daily dumping procedures. The method is proposed for the mapping of aluminum within a Greek bauxite residue, using Sentinel-2 imagery. The spatial correlation between metal concentrations and remote sensing indicators (e.g., spectral band ratios) is the premise for mapping aluminum varieties. The proposed method is based on Conditional Gaussian Co-Simulation, where Sentinel-2 images can be used as auxiliary variables. Simulation results are compared with the Co-kriging estimation method. To perform the Co-kriging estimation, the same conditions as simulation are used (same inputs, models, and neighborhoods). Simulation results quantified the metals variability in mining residues, presenting the metal concentration of piled materials in two time periods. For results validation and selecting the best map, fourteen validation samples were used. For the best representative maps of aluminum concentration, a correlation coefficient of about 0.7 between the validation data and obtained aluminum concentration map was obtained.

scholarly journals Uma abordagem metodológica de Sensoriamento Remoto para o monitoramento da contaminação do rio Paraopeba pós-desastre de Brumadinho-MG

2021 ◽  
Vol 43 ◽  
pp. e36
Author(s):  
Neison Cabral Ferreira Freire ◽  
Admilson Da Penha Pacheco ◽  
Vinícius D'Lucas Bezerra Queiroz
Keyword(s):  
Remote Sensing ◽  
Spectral Band ◽  
Ratio Method ◽  
Landsat 8 ◽  
Surface Reflectance ◽  
Band Ratio ◽  
Hydrographic Basin ◽  
Search Area ◽  
Brazilian History ◽  
Sentinel 2

The following article aims to present and discuss the monitoring, through Remote Sensing, of the dirt displacement caused by the collapse of the Córrego do Feijão’s dam I of mining waste, which occurred on January 25, 2019, in the rural area of Brumadinho, a city located in the state of Minas Gerais, Brazil. This event is considered one of the greatest technoindustrial disasters in Brazilian history, placing in danger one of the largest hydrographic basin in Brazil: the São Francisco river basin. The search area comprises from where the sludge mud got in contact with the Paraopeba’s right bank to its mouth into the Três Marias Dam, adding up to approximately 315 km. For this monitoring the spectral band ratio method was utilized,  using images from the sensors MSI/Sentinel-2 and OLI/Landsat-8 captured at different dates, employing standardization of means and variances to harmonize the range of the surface reflectance values in each image.

scholarly journals The Use of Sentinel-2 for Chlorophyll-a Spatial Dynamics Assessment: A Comparative Study on Different Lakes in Northern Germany

2021 ◽  
Vol 13 (8) ◽  
pp. 1542
Author(s):  
Igor Ogashawara ◽  
Christine Kiel ◽  
Andreas Jechow ◽  
Katrin Kohnert ◽  
Thomas Ruhtz ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Chlorophyll A ◽  
Spectral Band ◽  
Satellite Image ◽  
Atmospheric Correction ◽  
Spatial Dynamics ◽  
Eutrophic Lakes ◽  
Chl A ◽  
Spatial Coverage ◽  
Sentinel 2

Eutrophication of inland waters is an environmental issue that is becoming more common with climatic variability. Monitoring of this aquatic problem is commonly based on the chlorophyll-a concentration monitored by routine sampling with limited temporal and spatial coverage. Remote sensing data can be used to improve monitoring, especially after the launch of the MultiSpectral Instrument (MSI) on Sentinel-2. In this study, we compared the estimation of chlorophyll-a (chl-a) from different bio-optical algorithms using hyperspectral proximal remote sensing measurements, from simulated MSI responses and from an MSI image. For the satellite image, we also compare different atmospheric corrections routines before the comparison of different bio-optical algorithms. We used in situ data collected in 2019 from 97 sampling points across 19 different lakes. The atmospheric correction assessment showed that the performances of the routines varied for each spectral band. Therefore, we selected C2X, which performed best for bands 4 (root mean square error—RMSE = 0.003), 5 (RMSE = 0.004) and 6 (RMSE = 0.002), which are usually used for the estimation of chl-a. Considering all samples from the 19 lakes, the best performing chl-a algorithm and calibration achieved a RMSE of 16.97 mg/m3. When we consider only one lake chain composed of meso-to-eutrophic lakes, the performance improved (RMSE: 10.97 mg/m3). This shows that for the studied meso-to-eutrophic waters, we can reliably estimate chl-a concentration, whereas for oligotrophic waters, further research is needed. The assessment of chl-a from space allows us to assess spatial dynamics of the environment, which can be important for the management of water resources. However, to have an accurate product, similar optical water types are important for the overall performance of the bio-optical algorithm.

FEATURES OF CONSTRUCTION OF ON-BOARD HELICOPTER RADAR ICE EXPLORATION ON BASIS OF CIRCULAR GROUND SURFACE WITH SYNTHESIS OF APERTURE ROTATING ANTENNA

2019 ◽  
pp. 31-37
Author(s):  
I. G. Antсev ◽  
A. P. Aleshkin ◽  
V. V. Vladimirov ◽  
E. O. Kudrina ◽  
O. L. Polonchik ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Ground Surface ◽  
Rotor Blades ◽  
Navigation Systems ◽  
Propeller Blade ◽  
Antenna Aperture ◽  
Sensing System ◽  
Radar Systems ◽  
Simulation Results ◽  
Circular Antenna Array

The results of modeling the processes of receiving and processing the signals of remote sensing of the Earth’s surface using helicopter radar and synthesizing the antenna aperture due to its placement on the rotating rotor blades are presented. The mathematical correctness of the application of the developed algorithms for processing probing signals, as well as the uniqueness of the measurements, was confirmed. At the same time, the dimensions of the synthesized aperture due to the rotation of the radiator placed at the end of the propeller blade are equivalent to a circular antenna array with a diameter of tens of meters. The functionality of the remote sensing system based on this radar meets the requirements for ice observation and navigation systems for seagoing ships off the coast. The simulation results confirm the promise of further research in this direction and can be used in the development of radar systems with synthesized antenna aperture mounted on rotating rotor blades.

Soil organic carbon prediction using phenological parameters and remote sensing variables generated from Sentinel-2 images

CATENA ◽  
2021 ◽  
Vol 205 ◽  
pp. 105442
Author(s):  
Xianglin He ◽  
Lin Yang ◽  
Anqi Li ◽  
Lei Zhang ◽  
Feixue Shen ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Organic Carbon ◽  
Soil Organic Carbon ◽  
Sentinel 2

scholarly journals Multi-Scene Building Height Estimation Method Based on Shadow in High Resolution Imagery

2021 ◽  
Vol 13 (15) ◽  
pp. 2862
Author(s):  
Yakun Xie ◽  
Dejun Feng ◽  
Sifan Xiong ◽  
Jun Zhu ◽  
Yangge Liu
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Estimation Method ◽  
Absolute Error ◽  
Large Error ◽  
Estimation Methods ◽  
Height Estimation ◽  
Building Height ◽  
Remote Sensing Imagery ◽  
High Resolution Imagery

Accurately building height estimation from remote sensing imagery is an important and challenging task. However, the existing shadow-based building height estimation methods have large errors due to the complex environment in remote sensing imagery. In this paper, we propose a multi-scene building height estimation method based on shadow in high resolution imagery. First, the shadow of building is classified and described by analyzing the features of building shadow in remote sensing imagery. Second, a variety of shadow-based building height estimation models is established in different scenes. In addition, a method of shadow regularization extraction is proposed, which can solve the problem of mutual adhesion shadows in dense building areas effectively. Finally, we propose a method for shadow length calculation combines with the fish net and the pauta criterion, which means that the large error caused by the complex shape of building shadow can be avoided. Multi-scene areas are selected for experimental analysis to prove the validity of our method. The experiment results show that the accuracy rate is as high as 96% within 2 m of absolute error of our method. In addition, we compared our proposed approach with the existing methods, and the results show that the absolute error of our method are reduced by 1.24 m-3.76 m, which can achieve high-precision estimation of building height.

scholarly journals Enhancement of Detecting Permanent Water and Temporary Water in Flood Disasters by Fusing Sentinel-1 and Sentinel-2 Imagery Using Deep Learning Algorithms: Demonstration of Sen1Floods11 Benchmark Datasets

2021 ◽  
Vol 13 (11) ◽  
pp. 2220
Author(s):  
Yanbing Bai ◽  
Wenqi Wu ◽  
Zhengxin Yang ◽  
Jinze Yu ◽  
Bo Zhao ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Deep Learning ◽  
Large Scale ◽  
Learning Algorithms ◽  
Flood Events ◽  
Test Set ◽  
Source Data ◽  
Flood Disasters ◽  
Temporary Water ◽  
Sentinel 2

Identifying permanent water and temporary water in flood disasters efficiently has mainly relied on change detection method from multi-temporal remote sensing imageries, but estimating the water type in flood disaster events from only post-flood remote sensing imageries still remains challenging. Research progress in recent years has demonstrated the excellent potential of multi-source data fusion and deep learning algorithms in improving flood detection, while this field has only been studied initially due to the lack of large-scale labelled remote sensing images of flood events. Here, we present new deep learning algorithms and a multi-source data fusion driven flood inundation mapping approach by leveraging a large-scale publicly available Sen1Flood11 dataset consisting of roughly 4831 labelled Sentinel-1 SAR and Sentinel-2 optical imagery gathered from flood events worldwide in recent years. Specifically, we proposed an automatic segmentation method for surface water, permanent water, and temporary water identification, and all tasks share the same convolutional neural network architecture. We utilize focal loss to deal with the class (water/non-water) imbalance problem. Thorough ablation experiments and analysis confirmed the effectiveness of various proposed designs. In comparison experiments, the method proposed in this paper is superior to other classical models. Our model achieves a mean Intersection over Union (mIoU) of 52.99%, Intersection over Union (IoU) of 52.30%, and Overall Accuracy (OA) of 92.81% on the Sen1Flood11 test set. On the Sen1Flood11 Bolivia test set, our model also achieves very high mIoU (47.88%), IoU (76.74%), and OA (95.59%) and shows good generalization ability.

scholarly journals Some Peculiarities of Arable Soil Organic Matter Detection Using Optical Remote Sensing Data

2021 ◽  
Vol 13 (12) ◽  
pp. 2313
Author(s):  
Elena Prudnikova ◽  
Igor Savin
Keyword(s):  
Remote Sensing ◽  
Organic Matter ◽  
Soil Organic Matter ◽  
Spectral Reflectance ◽  
Remote Sensing Data ◽  
Soil Surface ◽  
Optical Remote Sensing ◽  
Test Field ◽  
Sensing Data ◽  
Sentinel 2

Optical remote sensing only provides information about the very thin surface layer of soil. Rainfall splash alters soil surface properties and its spectral reflectance. We analyzed the impact of rainfall on the success of soil organic matter (SOM) content (% by mass) detection and mapping based on optical remote sensing data. The subject of the study was the arable soils of a test field located in the Tula region (Russia), their spectral reflectance, and Sentinel-2 data. Our research demonstrated that rainfall negatively affects the accuracy of SOM predictions based on Sentinel-2 data. Depending on the average precipitation per day, the R2cv of models varied from 0.67 to 0.72, RMSEcv from 0.64 to 1.1% and RPIQ from 1.4 to 2.3. The incorporation of information on the soil surface state in the model resulted in an increase in accuracy of SOM content detection based on Sentinel-2 data: the R2cv of the models increased up to 0.78 to 0.84, the RMSEcv decreased to 0.61 to 0.71%, and the RPIQ increased to 2.1 to 2.4. Further studies are necessary to identify how the SOM content and composition of the soil surface change under the influence of rainfall for other soils, and to determine the relationships between rainfall-induced SOM changes and soil surface spectral reflectance.

scholarly journals Monitoring Bark Beetle Forest Damage in Central Europe. A Remote Sensing Approach Validated with Field Data

2020 ◽  
Vol 12 (21) ◽  
pp. 3634 ◽  
Author(s):  
Angel Fernandez-Carrillo ◽  
Zdeněk Patočka ◽  
Lumír Dobrovolný ◽  
Antonio Franco-Nieto ◽  
Beatriz Revilla-Romero
Keyword(s):  
Remote Sensing ◽  
Central Europe ◽  
Bark Beetle ◽  
Forest Damage ◽  
Economic Losses ◽  
In Situ Data ◽  
Damage Mapping ◽  
Beetle Damage ◽  
Forest Vitality ◽  
Sentinel 2

Over the last decades, climate change has triggered an increase in the frequency of spruce bark beetle (Ips typographus L.) in Central Europe. More than 50% of forests in the Czech Republic are seriously threatened by this pest, leading to high ecological and economic losses. The exponential increase of bark beetle infestation hinders the implementation of costly field campaigns to prevent and mitigate its effects. Remote sensing may help to overcome such limitations as it provides frequent and spatially continuous data on vegetation condition. Using Sentinel-2 images as main input, two models have been developed to test the ability of this data source to map bark beetle damage and severity. All models were based on a change detection approach, and required the generation of previous forest mask and dominant species maps. The first damage mapping model was developed for 2019 and 2020, and it was based on bi-temporal regressions in spruce areas to estimate forest vitality and bark beetle damage. A second model was developed for 2020 considering all forest area, but excluding clear-cuts and completely dead areas, in order to map only changes in stands dominated by alive trees. The three products were validated with in situ data. All the maps showed high accuracies (acc > 0.80). Accuracy was higher than 0.95 and F1-score was higher than 0.88 for areas with high severity, with omission errors under 0.09 in all cases. This confirmed the ability of all the models to detect bark beetle attack at the last phases. Areas with no damage or low severity showed more complex results. The no damage category yielded greater commission errors and relative bias (CEs = 0.30–0.42, relB = 0.42–0.51). The similar results obtained for 2020 leaving out clear-cuts and dead trees proved that the proposed methods could be used to help forest managers fight bark beetle pests. These biotic damage products based on Sentinel-2 can be set up for any location to derive regular forest vitality maps and inform of early damage.

scholarly journals Industrial Plume Properties Retrieved by Optimal Estimation Using Combined Hyperspectral and Sentinel-2 Data

2021 ◽  
Vol 13 (10) ◽  
pp. 1865
Author(s):  
Gabriel Calassou ◽  
Pierre-Yves Foucher ◽  
Jean-François Léon
Keyword(s):  
Matched Filter ◽  
Estimation Method ◽  
Optimal Estimation ◽  
Model Parameters ◽  
Surface Reflectance ◽  
Sequential Method ◽  
Modal Radius ◽  
Sentinel 2

Stack emissions from the industrial sector are a subject of concern for air quality. However, the characterization of the stack emission plume properties from in situ observations remains a challenging task. This paper focuses on the characterization of the aerosol properties of a steel plant stack plume through the use of hyperspectral (HS) airborne remote sensing imagery. We propose a new method, based on the combination of HS airborne acquisition and surface reflectance imagery derived from the Sentinel-2 Multi-Spectral Instrument (MSI). The proposed method detects the plume footprint and estimates the surface reflectance under the plume, the aerosol optical thickness (AOT), and the modal radius of the plume. Hyperspectral surface reflectances are estimated using the coupled non-negative matrix factorization (CNMF) method combining HS and MSI data. The CNMF reduces the error associated with estimating the surface reflectance below the plume, particularly for heterogeneous classes. The AOT and modal radius are retrieved using an optimal estimation method (OEM), based on the forward model and allowing for uncertainties in the observations and in the model parameters. The a priori state vector is provided by a sequential method using the root mean square error (RMSE) metric, which outperforms the previously used cluster tuned matched filter (CTMF). The OEM degrees of freedom are then analysed, in order to refine the mask plume and to enhance the quality of the retrieval. The retrieved mean radii of aerosol particles in the plume is 0.125 μμm, with an uncertainty of 0.05 μμm. These results are close to the ultra-fine mode (modal radius around 0.1 μμm) observed from in situ measurements within metallurgical plant plumes from previous studies. The retrieved AOT values vary between 0.07 (near the source point) and 0.01, with uncertainties of 0.005 for the darkest surfaces and above 0.010 for the brightest surfaces.

Sign in / Sign up

Export Citation Format

Share Document