scholarly journals Smoke Detection from Himawari-8 Satellite Data over Kalimantan Island Using Multilayer Perceptrons

2021 ◽  
Vol 13 (18) ◽  
pp. 3721
Author(s):  
Yuhao Mo ◽  
Xin Yang ◽  
Hong Tang ◽  
Zhigang Li
Keyword(s):  
Biomass Burning ◽  
Satellite Data ◽  
Satellite Remote Sensing ◽  
Sampling Methods ◽  
Classification Tree ◽  
Multilayer Perceptrons ◽  
High Temporal Resolution ◽  
Smoke Detection ◽  
Training Samples ◽  
Biomass Burning Aerosol

The smoke from biomass burning on Kalimantan Island has caused severe environmental problems in Southeast Asia’s primary burning regions and surrounding regions due to the overspread haze. To monitor the biomass burning aerosol plumes on Kalimantan Island, the high-temporal-resolution Himawari-8 satellite data were used in this study. However, studies are limited on smoke detection using satellite remote sensing for Kalimantan Island because of the difficulty caused by frequently occurring clouds and the lack of prior knowledge on applying traditional threshold methods. In this study, we used the multilayer perceptron (MLP) method to identify smoke over Kalimantan Island in August 2015, one of the most severe fire seasons. To prepare sufficient supervision information, a pixel-level labeled dataset was established based on the Himawari-8 data. Based on the labeled dataset, three MLP approaches and two sampling methods were applied to create training samples. A comparison between the detection results for the MLP approaches and classification tree analysis (i.e., CTA) showed that MLP is superior to CTA. The visualization results also showed that the detected smoke areas included those mixed with clouds. Some detected smoke is difficult to identify by the human eye, suggesting that the explanatory dataset built for this study is sufficiently comprehensive. Therefore, the pixel-level labeled dataset and MLP are suitable for regions that are frequently cloud-covered.

scholarly journals A novel methodology for large-scale daily assessment of the direct radiative forcing of smoke aerosols

2015 ◽  
Vol 15 (10) ◽  
pp. 5471-5483 ◽  
Author(s):  
E. T. Sena ◽  
P. Artaxo
Keyword(s):  
Remote Sensing ◽  
Spatial Distribution ◽  
Radiative Transfer ◽  
Biomass Burning ◽  
Satellite Remote Sensing ◽  
Radiative Forcing ◽  
High Temporal Resolution ◽  
Radiation Balance ◽  
Direct Radiative Forcing ◽  
The Impact

Abstract. A new methodology was developed for obtaining daily retrievals of the direct radiative forcing of aerosols (24h-DARF) at the top of the atmosphere (TOA) using satellite remote sensing. Simultaneous CERES (Clouds and Earth's Radiant Energy System) shortwave flux at the top of the atmosphere and MODIS (Moderate Resolution Spectroradiometer) aerosol optical depth (AOD) retrievals were used. To analyse the impact of forest smoke on the radiation balance, this methodology was applied over the Amazonia during the peak of the biomass burning season from 2000 to 2009. To assess the spatial distribution of the DARF, background smoke-free scenes were selected. The fluxes at the TOA under clean conditions (Fcl) were estimated as a function of the illumination geometry (θ0) for each 0.5° × 0.5° grid cell. The instantaneous DARF was obtained as the difference between the clean (Fcl (θ0)) and the polluted flux at the TOA measured by CERES in each cell (Fpol (θ0)). The radiative transfer code SBDART (Santa Barbara DISORT Radiative Transfer model) was used to expand instantaneous DARFs to 24 h averages. This new methodology was applied to assess the DARF both at high temporal resolution and over a large area in Amazonia. The spatial distribution shows that the mean 24h-DARF can be as high as −30 W m−2 over some regions. The temporal variability of the 24h-DARF along the biomass burning season was also studied and showed large intraseasonal and interannual variability. We showed that our methodology considerably reduces statistical sources of uncertainties in the estimate of the DARF, when compared to previous approaches. DARF assessments using the new methodology agree well with ground-based measurements and radiative transfer models. This demonstrates the robustness of the new proposed methodology for assessing the radiative forcing for biomass burning aerosols. To our knowledge, this is the first time that satellite remote sensing assessments of the DARF have been compared with ground-based DARF estimates.

scholarly journals A novel methodology using MODIS and CERES for assessing the daily radiative forcing of smoke aerosols in large scale over the Amazonia

2014 ◽  
Vol 14 (22) ◽  
pp. 31515-31550
Author(s):  
E. T. Sena ◽  
P. Artaxo
Keyword(s):  
Remote Sensing ◽  
Spatial Distribution ◽  
Radiative Transfer ◽  
Biomass Burning ◽  
Satellite Remote Sensing ◽  
Radiative Forcing ◽  
Large Scale ◽  
High Temporal Resolution ◽  
Modis Aod ◽  
The Impact

Abstract. A new methodology was developed for obtaining daily retrievals of the direct radiative forcing of aerosols (24h-DARF) at the top of the atmosphere (TOA) using satellite remote sensing. For that, simultaneous CERES (Clouds and Earth's Radiant Energy System) shortwave flux at the top of the atmosphere (TOA) and MODIS (Moderate Resolution Spectroradiometer) aerosol optical depth (AOD) retrievals were used. This methodology is applied over a large region of Brazilian Amazonia. We focused our studies on the peak of the biomass burning season (August to September) from 2000 to 2009 to analyse the impact of forest smoke on the radiation balance. To assess the spatial distribution of the DARF, background scenes without biomass burning impacts, were defined as scenes with MODIS AOD < 0.1. The fluxes at the TOA retrieved by CERES for those clean conditions (Fcl) were estimated as a function of the illumination geometry (θ0) for each 0.5° × 0.5° grid cell. The instantaneous DARF was obtained as the difference between clean Fcl (θ0) and the polluted mean flux at the TOA measured by CERES in each cell (Fpol (θ0)). The radiative transfer code SBDART (Santa Barbara DISORT Radiative Transfer model) was used to expand instantaneous DARFs to 24 h averages. With this methodology it is possible to assess the DARF both at large scale and at high temporal resolution. This new methodology also showed to be more robust, because it considerably reduces statistical sources of uncertainties in the estimates of the DARF, when compared to previous assessments of the DARF using satellite remote sensing. The spatial distribution of the 24h-DARF shows that, for some cases, the mean 24h-DARF presents local values as high as −30 W m−2. The temporal variability of the 24h-DARF along the biomass burning season was also studied and showed large intraseasonal and interannual variability. In an attempt to validate the radiative forcing obtained in this work using CERES and MODIS, those results were compared to coincident AERONET ground based estimates of the DARF. This analysis showed that CERES-MODIS and AERONET 24h-DARF are related as DARFCERES-MODIS24 h = (1.07 ± 0.04)DARFAERONET24 h −(0.0 ± 0.6). This is a significant result, considering that the 24h-DARF retrievals were obtained by applying completely different methodologies, and using different instruments. The instantaneous CERES-MODIS DARF was also compared with radiative transfer evaluations of the forcing. To validate the aerosol and surface models used in the simulations, downward shortwave fluxes at the surface evaluated using SBDART and measured by pyranometers were compared. The simulated and measured downward fluxes are related through FBOAPYRANOMETER = (1.00 ± 0.04)FBOASBDART −(20 ± 27), indicating that the models and parameters used in the simulations were consistent. The relationship between CERES-MODIS instantaneous DARF and calculated SBDART forcing was satisfactory, with DARFCERES-MODIS = (0.86 ± 0.06)DARFSBDART −(6 ± 2). Those analysis showed a good agreement between satellite remote sensing, ground-based and radiative transfer evaluated DARF, demonstrating the robustness of the new proposed methodology for calculated radiative forcing for biomass burning aerosols. To our knowledge, this was the first time satellite remote sensing assessments of the DARF were compared with ground based DARF estimates.

Satellite Remote Sensing and the Management of Natural Resources

2019 ◽  
Author(s):  
Nathalie Pettorelli
Keyword(s):  
Remote Sensing ◽  
Resource Management ◽  
Natural Resource Management ◽  
Natural Resource ◽  
Satellite Data ◽  
Satellite Remote Sensing ◽  
Habitat Restoration ◽  
Remote Sensing Data ◽  
Ecological Knowledge ◽  
Postgraduate Students

This book intends to familiarise prospective users in the environmental community with satellite remote sensing technology and its applications, introducing terminology and principles behind satellite remote sensing data and analyses. It provides a detailed overview of the possible applications of satellite data in natural resource management, demonstrating how ecological knowledge and satellite-based information can be effectively combined to address a wide array of current natural resource management needs. Topics considered include the use of satellite data to monitor the various dimensions of biodiversity; the use of this technology to track pressures on biodiversity such as invasive species, pollution, and illegal fishing; the utility of satellite remote sensing to inform the management of protected areas, translocation, and habitat restoration; and the contribution of satellite remote sensing towards the monitoring of ecosystem services and wellbeing. The intended audience is ecologists and environmental scientists; the book is targeted as a handbook and is therefore also suitable for advanced undergraduate and postgraduate students in the biological and ecological sciences, as well as policy makers and specialists in the fields of conservation biology, biodiversity monitoring, and natural resource management. The book assumes no prior technical knowledge of satellite remote sensing systems and products. It is written so as to generate interest in the ecological, environmental management, and remote sensing communities, highlighting issues associated with the emergence of truly synergistic approaches between these disciplines.

scholarly journals Aerosol Characterization during the Summer 2017 Huge Fire Event on Mount Vesuvius (Italy) by Remote Sensing and In Situ Observations

2021 ◽  
Vol 13 (10) ◽  
pp. 2001
Author(s):  
Antonella Boselli ◽  
Alessia Sannino ◽  
Mariagrazia D’Emilio ◽  
Xuan Wang ◽  
Salvatore Amoruso
Keyword(s):  
Remote Sensing ◽  
Biomass Burning ◽  
Ground Level ◽  
Large Area ◽  
Fire Event ◽  
Near Surface ◽  
Mean Values ◽  
Microphysical Properties ◽  
Observational Site ◽  
Biomass Burning Aerosol

During the summer of 2017, multiple huge fires occurred on Mount Vesuvius (Italy), dispersing a large quantity of ash in the surrounding area ensuing the burning of tens of hectares of Mediterranean scrub. The fires affected a very large area of the Vesuvius National Park and the smoke was driven by winds towards the city of Naples, causing daily peak values of particulate matter (PM) concentrations at ground level higher than the limit of the EU air quality directive. The smoke plume spreading over the area of Naples in this period was characterized by active (lidar) and passive (sun photometer) remote sensing as well as near-surface (optical particle counter) observational techniques. The measurements allowed us to follow both the PM variation at ground level and the vertical profile of fresh biomass burning aerosol as well as to analyze the optical and microphysical properties. The results evidenced the presence of a layer of fine mode aerosol with large mean values of optical depth (AOD > 0.25) and Ångstrom exponent (γ > 1.5) above the observational site. Moreover, the lidar ratio and aerosol linear depolarization obtained from the lidar observations were about 40 sr and 4%, respectively, consistent with the presence of biomass burning aerosol in the atmosphere.

scholarly journals Analysis of incoming biomass burning aerosol plumes over southern Brazil

2016 ◽  
Vol 17 (11) ◽  
pp. 577-585 ◽  
Author(s):  
Aline Macedo de Oliveira ◽  
Glauber Lopes Mariano ◽  
Marcelo Félix Alonso ◽  
Ericka Voss Chagas Mariano
Keyword(s):  
Biomass Burning ◽  
Southern Brazil ◽  
Biomass Burning Aerosol

scholarly journals High-Resolution Biomass Burning Aerosol Transport Simulations in the Tropics

Atmosphere ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 91
Author(s):  
Nurzahziani ◽  
Chinnawat Surussavadee ◽  
Thanchanok Noosook
Keyword(s):  
High Resolution ◽  
Biomass Burning ◽  
Mean Squared Error ◽  
Dry Mass ◽  
Northern Region ◽  
Emission Model ◽  
Aerosol Transport ◽  
Monthly Average ◽  
Biomass Burning Aerosol ◽  
The Tropics

This study evaluates the performance of the Weather Research and Forecasting Model with Chemistry (WRF-Chem) for simulating biomass burning aerosol transport at high resolution in the tropics using two different biomass burning emission inventories. Hourly, daily, and monthly average PM10 dry mass concentrations at 5 km resolution—simulated separately using the Brazilian Biomass Burning Emission Model (WRF-3BEM) and the Fire Inventory from NCAR (WRF-FINN) and their averages (WRF-AVG) for 3 months from February to April—are evaluated, using measurements from ground stations distributed in northern Thailand for 2014 and 2015. Results show that WRF-3BEM agrees well with observations and performs much better than WRF-FINN and WRF-AVG. WRF-3BEM simulations are almost unbiased, while those of WRF-FINN and WRF-AVG are significantly overestimated due to significant overestimates of FINN emissions. WRF-3BEM and the measured monthly average PM10 concentrations for all stations and both years are 89.22 and 87.20 μg m−3, respectively. The root mean squared error of WRF-3BEM simulated monthly average PM10 concentrations is 72.00 and 47.01% less than those of WRF-FINN and WRF-AVG, respectively. The correlation coefficient of WRF-3BEM simulated monthly PM10 concentrations and measurements is 0.89. WRF-3BEM can provide useful biomass burning aerosol transport simulations for the northern region of Thailand.

Sign in / Sign up

Export Citation Format

Share Document