scholarly journals Comprehensive Improvement of the Sensitivity and Detectability of a Large-Aperture Electromagnetic Wear Particle Detector

Sensors ◽  
2019 ◽  
Vol 19 (14) ◽  
pp. 3162 ◽  
Author(s):  
Ran Jia ◽  
Biao Ma ◽  
Changsong Zheng ◽  
Xin Ba ◽  
Liyong Wang ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Wear Particle ◽  
Impedance Change ◽  
Particle Detector ◽  
Particle Detection ◽  
Detection Range ◽  
Micro Particles ◽  
Mode Decomposition ◽  
Flux Change ◽  
Lock In

The electromagnetic wear particle detector has been widely studied due to its prospective applications in various fields. In order to meet the requirements of the high-precision wear particle detector, a comprehensive method of improving the sensitivity and detectability of the sensor is proposed. Based on the nature of the sensor, parallel resonant exciting coils are used to increase the impedance change of the exciting circuit caused by particles, and the serial resonant topology structure and an amorphous core are applied to the inductive coil, which improves the magnetic flux change of the inductive coil and enlarges the induced electromotive force of the sensor. Moreover, the influences of the resonance frequency on the sensitivity and effective particle detection range of the sensor are studied, which forms the basis for optimizing the frequency of the magnetic field within the sensor. For further improving the detectability of micro-particles and the real-time monitoring ability of the sensor, a simple and quick extraction method for the particle signal, based on a modified lock-in amplifier and empirical mode decomposition and reverse reconstruction (EMD-RRC), is proposed, which can effectively extract the particle signal from the raw signal with low signal-to-noise ratio (SNR). The simulation and experimental results show that the proposed methods improve the sensitivity of the sensor by more than six times.

scholarly journals Short-Range Vital Signs Sensing Based on EEMD and CWT Using IR-UWB Radar

2016 ◽  
Author(s):  
Xikun Hu ◽  
Tian Jin
Keyword(s):  
Doppler Radar ◽  
Signal To Noise Ratio ◽  
Vital Signs ◽  
Ensemble Empirical Mode Decomposition ◽  
The Body ◽  
Ultra Wideband ◽  
Detection Range ◽  
Wall Movement ◽  
Uwb Radar ◽  
Mode Decomposition

The radar sensor described realizes healthcare monitoring capable of detecting subject chest-wall movement caused by cardiopulmonary activities, and wirelessly estimating the respiration and heartbeat rates of the subject without attaching any devices to the body. Conventional single-tone Doppler radar can only capture Doppler signatures because of a lack of bandwidth information with noncontact sensors. In contrast, we take full advantage of impulse radio ultra-wideband (IR-UWB) radar to achieve low power consumption and convenient portability, with a flexible detection range and desirable accuracy. A noise reduction method based on improved ensemble empirical mode decomposition (EEMD) and a vital sign separation method based on the continuous-wavelet transform (CWT) are proposed jointly to improve the signal-to-noise ratio (SNR) in order to acquire accurate respiration and heartbeat rates. Experimental results illustrate that respiration and heartbeat signals can be extracted accurately under different conditions. This noncontact healthcare sensor system proves the commercial feasibility and considerable accessibility of using compact IR-UWB radar for emerging biomedical applications.

scholarly journals Short-Range Vital Signs Sensing Based on EEMD and CWT Using IR-UWB Radar

2016 ◽  
Author(s):  
Xikun Hu ◽  
Tian Jin
Keyword(s):  
Signal To Noise Ratio ◽  
Vital Signs ◽  
Ensemble Empirical Mode Decomposition ◽  
The Body ◽  
Ultra Wideband ◽  
Detection Range ◽  
Wall Movement ◽  
Uwb Radar ◽  
Mode Decomposition ◽  
Healthcare Monitoring

The radar sensor described realizes healthcare monitoring capable of detecting subject chest-wall movement caused by cardiopulmonary activities, and wirelessly estimating the respiration and heartbeat rates of the subject without attaching any devices to the body. No conventional Doppler only can capture Doppler signatures because of a lack of bandwidth information with noncontact sensors. In contrast, we take full advantages of impulse radio ultra-wideband (IR-UWB) radar to achieve low power consumption and convenient portability, with a flexible detection range and desirable accuracy. A noise reduction method based on improved ensemble empirical mode decomposition (EEMD) and a vital sign separation method based on continuous-wavelet transform (CWT) are proposed jointly to improve the signal-to-noise ratio (SNR) in order to acquire accurate respiration and heartbeat rates. This noncontact healthcare sensor system proves the commercial feasibility and considerable accessibility of using compact IR-UWB radar for emerging biomedical applications. Compared with traditional contact measurement devices, experimental results utilizing a 2.3 GHz bandwidth transceiver, demonstrate 100% similar results.

scholarly journals Efficient Lidar Signal Denoising Algorithm Using Variational Mode Decomposition Combined with a Whale Optimization Algorithm

2019 ◽  
Vol 11 (2) ◽  
pp. 126 ◽  
Author(s):  
Hongxu Li ◽  
Jianhua Chang ◽  
Fan Xu ◽  
Zhenxing Liu ◽  
Zhenbo Yang ◽  
...  
Keyword(s):  
Optimization Algorithm ◽  
Signal To Noise Ratio ◽  
Whale Optimization Algorithm ◽  
Variational Mode Decomposition ◽  
Bhattacharyya Distance ◽  
Detection Range ◽  
Sensing Technology ◽  
Mode Decomposition ◽  
Whale Optimization ◽  
Satisfactory Analysis

Although lidar is a powerful active remote sensing technology, lidar echo signals are easily contaminated by noise, particularly in strong background light, which severely affects the retrieval accuracy and the effective detection range of the lidar system. In this study, a coupled variational mode decomposition (VMD) and whale optimization algorithm (WOA) for noise reduction in lidar signals is proposed and demonstrated completely. The combination of optimal VMD parameters of decomposition mode number K and quadratic penalty α was obtained by using the WOA and was critical in acquiring satisfactory analysis results for VMD denoising technology. Then, the Bhattacharyya distance was applied to identify the relevant modes, which were reconstructed to achieve noise filtering. Simulation results show that the performance of the proposed VMD-WOA method is superior to that of wavelet transform, empirical mode decomposition, and its variations. Experimentally, this method was successfully used to filter a lidar echo signal. The signal-to-noise ratio of the denoised signal was increased to 23.92 dB, and the detection range was extended from 6 to 10 km.

scholarly journals Location Detection Method of Detector in Pipeline Using VMD Algorithm and Machine Learning Classifier

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1436
Author(s):  
Tuoru Li ◽  
Senxiang Lu ◽  
Enjie Xu
Keyword(s):  
Machine Learning ◽  
Magnetic Flux ◽  
Magnetic Flux Leakage ◽  
Intrinsic Mode Functions ◽  
Detection Range ◽  
Vibration Signals ◽  
Feature Vectors ◽  
Learning Classifier ◽  
Mode Decomposition ◽  
Flux Leakage

The internal detector in a pipeline needs to use the ground marker to record the elapsed time for accurate positioning. Most existing ground markers use the magnetic flux leakage testing principle to detect whether the internal detector passes. However, this paper uses the method of detecting vibration signals to track and locate the internal detector. The Variational Mode Decomposition (VMD) algorithm is used to extract features, which solves the defect of large noise and many disturbances of vibration signals. In this way, the detection range is expanded, and some non-magnetic flux leakage internal detectors can also be located. Firstly, the extracted vibration signals are denoised by the VMD algorithm, then kurtosis value and power value are extracted from the intrinsic mode functions (IMFs) to form feature vectors, and finally the feature vectors are input into random forest and Multilayer Perceptron (MLP) for classification. Experimental research shows that the method designed in this paper, which combines VMD with a machine learning classifier, can effectively use vibration signals to locate the internal detector and has the characteristics of high accuracy and good adaptability.

scholarly journals Photonic Low Cost Micro-Sensor for in-Line Wear Particle Detection in Flowing Lube Oils

Sensors ◽  
2017 ◽  
Vol 17 (3) ◽  
pp. 586 ◽  
Author(s):  
Jon Mabe ◽  
Joseba Zubia ◽  
Eneko Gorritxategi
Keyword(s):  
Low Cost ◽  
Wear Particle ◽  
Particle Detection ◽  
Line Wear ◽  
Micro Sensor

scholarly journals Research on Fault Diagnosis of Gearbox with Improved Variational Mode Decomposition

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3510 ◽  
Author(s):  
Zhijian Wang ◽  
Junyuan Wang ◽  
Wenhua Du
Keyword(s):  
Fault Diagnosis ◽  
Signal To Noise Ratio ◽  
Optimal Number ◽  
Original Signal ◽  
Variational Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Multiple Fault ◽  
Mode Decomposition ◽  
Fault Features ◽  
Reconstructed Signal

Variational Mode Decomposition (VMD) can decompose signals into multiple intrinsic mode functions (IMFs). In recent years, VMD has been widely used in fault diagnosis. However, it requires a preset number of decomposition layers K and is sensitive to background noise. Therefore, in order to determine K adaptively, Permutation Entroy Optimization (PEO) is proposed in this paper. This algorithm can adaptively determine the optimal number of decomposition layers K according to the characteristics of the signal to be decomposed. At the same time, in order to solve the sensitivity of VMD to noise, this paper proposes a Modified VMD (MVMD) based on the idea of Noise Aided Data Analysis (NADA). The algorithm first adds the positive and negative white noise to the original signal, and then uses the VMD to decompose it. After repeated cycles, the noise in the original signal will be offset to each other. Then each layer of IMF is integrated with each layer, and the signal is reconstructed according to the results of the integrated mean. MVMD is used for the final decomposition of the reconstructed signal. The algorithm is used to deal with the simulation signals and measured signals of gearbox with multiple fault characteristics. Compared with the decomposition results of EEMD and VMD, it shows that the algorithm can not only improve the signal to noise ratio (SNR) of the signal effectively, but can also extract the multiple fault features of the gear box in the strong noise environment. The effectiveness of this method is verified.

scholarly journals Empirical Mode Decomposition in Discrete Time Signals Denoising

2019 ◽  
Vol 16 (1) ◽  
pp. 10-13 ◽  
Author(s):  
Zoltán Germán-Salló
Keyword(s):  
Empirical Mode Decomposition ◽  
Signal To Noise Ratio ◽  
Main Idea ◽  
Discrete Wavelet ◽  
Intrinsic Mode Functions ◽  
Nonlinear Signal Processing ◽  
Mode Decomposition ◽  
Time Signals ◽  
Nonlinear Signal ◽  
Filtering Procedure

Abstract This study explores the data-driven properties of the empirical mode decomposition (EMD) for signal denoising. EMD is an acknowledged procedure which has been widely used for non-stationary and nonlinear signal processing. The main idea of the EMD method is to decompose the analyzed signal into components without using expansion functions. This is a signal dependent representation and provides intrinsic mode functions (IMFs) as components. These are analyzed, through their Hurst exponent and if they are found being noisy components they will be partially or integrally eliminated. This study presents an EMD decomposition-based filtering procedure applied to test signals, the results are evaluated through signal to noise ratio (SNR) and mean square error (MSE). The obtained results are compared with discrete wavelet transform based filtering results.

scholarly journals A Denoising Method of Ship Radiated Noise Signal Based on Modified CEEMDAN, Dispersion Entropy, and Interval Thresholding

Electronics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 597 ◽  
Author(s):  
Guohui Li ◽  
Zhichao Yang ◽  
Hong Yang
Keyword(s):  
Signal To Noise Ratio ◽  
Noise Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Measurement Technology ◽  
Signal Denoising ◽  
Frequency Noise ◽  
Denoising Method ◽  
Radiated Noise ◽  
Mode Decomposition ◽  
Adaptive Noise

Due to the non-linear and non-stationary characteristics of ship radiated noise (SR-N) signal, the traditional linear and frequency-domain denoising methods cannot be used for such signals. In this paper, an SR-N signal denoising method based on modified complete ensemble empirical mode decomposition (EMD) with adaptive noise (CEEMDAN), dispersion entropy (DE), and interval thresholding is proposed. The proposed denoising method has the following advantages: (1) as an improved version of CEEMDAN, modified CEEMDAN (MCEEMDAN) combines the advantages of EMD and CEEMDAN, and it is more reliable than CEEMDAN and has less consuming time; (2) as a fast complexity measurement technology, DE can effectively identify the type of intrinsic mode function (IMF); and (3) interval thresholding is used for SR-N signal denoising, which avoids loss of amplitude information compared with traditional denoising methods. Firstly, the original signal is decomposed into a series of IMFs using MCEEMDAN. According to the DE value of IMF, the modes are divided into three types: noise IMF, noise-dominated IMF and pure IMF. After noise IMFs are removed, the noise-dominated IMFs are denoised using interval thresholding. Finally, the pure IMF and the processed noise-dominated IMFs are reconstructed to obtain the final denoised signal. The denoising experiments with the Chen’s chaotic system show that the proposed method has a higher signal-to-noise ratio (SNR) than the other three methods. Applying the proposed method to denoise the real SR-N signal, the topological structure of chaotic attractor can be recovered clearly. It is proved that the proposed method can effectively suppress the high-frequency noise of SR-N signal.

Sign in / Sign up

Export Citation Format

Share Document