scholarly journals Statistical Beamforming for Massive MIMO Systems with Distinct Spatial Correlations

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6255
Author(s):  
Taehyoung Kim ◽  
Sangjoon Park
Keyword(s):  
Massive Mimo ◽  
Degrees Of Freedom ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
High Signal ◽  
Spatial Correlations ◽  
Channel Correlation ◽  
Low Correlation ◽  
Noise Ratio

In this paper, we propose a novel statistical beamforming (SBF) method called the partial-nulling-based SBF (PN-SBF) to serve a number of users that are undergoing distinct degrees of spatial channel correlations in massive multiple-input multiple-output (MIMO) systems. We consider a massive MIMO system with two user groups. The first group experiences a low spatial channel correlation, whereas the second group has a high spatial channel correlation, which can happen in massive MIMO systems that are based on fifth-generation networks. By analyzing the statistical signal-to-interference-plus-noise ratio, it can be observed that the statistical beamforming vector for the low-correlation group should be designed as the orthogonal complement for the space spanned by the aggregated channel covariance matrices of the high-correlation group. Meanwhile, the spatial degrees of freedom for the high-correlation group should be preserved without cancelling the interference to the low-correlation group. Accordingly, a group-common pre-beamforming matrix is applied to the low-correlation group to cancel the interference to the high-correlation group. In addition, to deal with the intra-group interference in each group, the post-beamforming vector for each group is designed in the manner of maximizing the signal-to-leakage-and-noise ratio, which yields additional performance improvements for the PN-SBF. The simulation results verify that the proposed PN-SBF outperforms the conventional SBF schemes in terms of the ergodic sum rate for the massive MIMO systems with distinct spatial correlations, without the rate ceiling effect in the high signal-to-noise ratio region unlike conventional SBF schemes.

scholarly journals Performance Analysis of Rate Splitting in Massive MIMO Systems with Low Resolution ADCs/DACs

2021 ◽  
Vol 11 (20) ◽  
pp. 9409
Author(s):  
Roger Kwao Ahiadormey ◽  
Kwonhue Choi
Keyword(s):  
Mimo Systems ◽  
Mimo System ◽  
Signal To Noise Ratio ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Quantization Noise ◽  
High Signal ◽  
Low Resolution ◽  
Rate Splitting ◽  
Noise Ratio

In this paper, we propose rate-splitting (RS) multiple access to mitigate the effects of quantization noise (QN) inherent in low-resolution analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). We consider the downlink (DL) of a multiuser massive multiple-input multiple-output (MIMO) system where the base station (BS) is equipped with low-resolution ADCs/DACs. The BS employs the RS scheme for data transmission. Under imperfect channel state information (CSI), we characterize the spectral efficiency (SE) and energy efficiency (EE) by deriving the asymptotic signal-to-interference-and-noise ratio (SINR). For 1-bit resolution, the QN is very high, and the RS scheme shows no rate gain over the non-RS scheme. As the ADC/DAC resolution increases (i.e., 2–3 bits), the RS scheme achieves higher SE in the high signal-to-noise ratio (SNR) regime compared to that of the non-RS scheme. For a 3-bit resolution, the number of antennas can be reduced by 27% in the RS scheme to achieve the same SE as the non-RS scheme. Low-resolution DACs degrades the system performance more than low-resolution ADCs. Hence, it is preferable to equip the system with low-resolution ADCs than low-resolution DACs. The system achieves the best SE/EE tradeoff for 4-bit resolution ADCs/DACs.

scholarly journals The Downlink Performance for Cell-Free Massive MIMO with Instantaneous CSI in Slowly Time-Varying Channels

Entropy ◽  
2021 ◽  
Vol 23 (11) ◽  
pp. 1552
Author(s):  
Tongzhou Han ◽  
Danfeng Zhao
Keyword(s):  
Power Control ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Time Varying ◽  
Input Multiple Output ◽  
Efficiency Performance ◽  
A Cell ◽  
Time Varying Channel

In centralized massive multiple-input multiple-output (MIMO) systems, the channel hardening phenomenon can occur, in which the channel behaves as almost fully deterministic as the number of antennas increases. Nevertheless, in a cell-free massive MIMO system, the channel is less deterministic. In this paper, we propose using instantaneous channel state information (CSI) instead of statistical CSI to obtain the power control coefficient in cell-free massive MIMO. Access points (APs) and user equipment (UE) have sufficient time to obtain instantaneous CSI in a slowly time-varying channel environment. We derive the achievable downlink rate under instantaneous CSI for frequency division duplex (FDD) cell-free massive MIMO systems and apply the results to the power control coefficients. For FDD systems, quantized channel coefficients are proposed to reduce feedback overhead. The simulation results show that the spectral efficiency performance when using instantaneous CSI is approximately three times higher than that achieved using statistical CSI.

scholarly journals Channel Estimation for Frequency Division Duplexing Multi-user Massive MIMO Systems via Tensor Compressive Sensing

2017 ◽  
Vol 67 (6) ◽  
pp. 668
Author(s):  
Qingzhu Wang ◽  
Mengying Wei ◽  
Yihai Zhu
Keyword(s):  
Channel Estimation ◽  
Compressive Sensing ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Three Dimensional ◽  
Data Representation ◽  
Frequency Division ◽  
Frequency Division Duplexing

<p class="p1">To make full use of space multiplexing gains for the multi-user massive multiple-input multiple-output, accurate channel state information at the transmitter (CSIT) is required. However, the large number of users and antennas make CSIT a higher-order data representation. Tensor-based compressive sensing (TCS) is a promising method that is suitable for high-dimensional data processing; it can reduce training pilot and feedback overhead during channel estimation. In this paper, we consider the channel estimation in frequency division duplexing (FDD) multi-user massive MIMO system. A novel estimation framework for three dimensional CSIT is presented, in which the modes include the number of transmitting antennas, receiving antennas, and users. The TCS technique is employed to complete the reconstruction of three dimensional CSIT. The simulation results are given to demonstrate that the proposed estimation approach outperforms existing algorithms.</p>

scholarly journals Pilot Decontamination Using Asynchronous Fractional Pilot Scheduling in Massive MIMO Systems

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6213
Author(s):  
Muhammad Irshad Zahoor ◽  
Zheng Dou ◽  
Syed Bilal Hussain Shah ◽  
Imran Ullah Khan ◽  
Sikander Ayub ◽  
...  
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Ideal Number ◽  
Sum Rate ◽  
Inter Cell Interference ◽  
Time Division

Due to large spectral efficiency and low power consumption, the Massive Multiple-Input-Multiple-Output (MIMO) became a promising technology for the 5G system. However, pilot contamination (PC) limits the performance of massive MIMO systems. Therefore, two pilot scheduling schemes (i.e., Fractional Pilot Reuse (FPR) and asynchronous fractional pilot scheduling scheme (AFPS)) are proposed, which significantly mitigated the PC in the uplink time division duplex (TDD) massive MIMO system. In the FPR scheme, all the users are distributed into the central cell and edge cell users depending upon their signal to interference plus noise ratio (SINR). Further, the capacity of central and edge users is derived in terms of sum-rate, and the ideal number of the pilot is calculated which significantly maximized the sum rate. In the proposed AFPS scheme, the users are grouped into central users and edge users depending upon the interference they receive. The central users are assigned the same set of pilots because these users are less affected by interference, while the edge users are assigned the orthogonal pilots because these users are severely affected by interference. Consequently, the pilot overhead is reduced and inter-cell interference (ICI) is minimized. Further, results verify that the proposed schemes outperform the previous proposed traditional schemes, in terms of improved sum rates.

Hybrid optimization-based pilot scheduling for reducing pilot contamination in massive MIMO systems

2020 ◽  
Vol 18 (04) ◽  
pp. 2050028
Author(s):  
Ambala Pradeep Kumar ◽  
Tadisetty Srinivasulu
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Fitness Function ◽  
Scheduling Algorithm ◽  
Multiple Input Multiple Output ◽  
Spider Monkey ◽  
Achievable Rate ◽  
Pilot Contamination ◽  
Spider Monkey Optimization

Massive multiple-input multiple-output (MIMO) is an emerging technology used in next-generation cellular networks. The major challenge in the massive MIMO system is the pilot contamination. The contamination of the pilot sequences causes inaccurate channel estimation leading to huge errors in the transmissions. This paper proposes an approach for pilot contamination reduction in massive MIMO systems. In order to reduce the pilot contamination, a pilot scheduling algorithm is devised by proposing an optimization algorithm named Elephant-based Spider Monkey Optimization (ESMO) for scheduling the pilots. The proposed ESMO is designed by combining Elephant Herding Optimization (EHO) into Spider Monkey Optimization (SMO). The pilot scheduling approach employs proposed ESMO and user degradation for scheduling the pilots. Moreover, the optimal pilot scheduling is carried out using the newly devised fitness function that considers achievable rate using various user grouping parameters, such as utility function, and grouping parameter. Thus, the proposed ESMO-based pilot scheduling and fitness function are responsible for initiating optimal pilot scheduling. The performance of the proposed method is compared with the existing methods, and the proposed ESMO outperformed the existing methods with maximal achievable rate value of 39.257[Formula: see text]bps/Hz, and maximal SINR with value 118.75[Formula: see text]dB, respectively.

scholarly journals Massive MIMO Systems for 5G

2020 ◽  
Author(s):  
Robin Chataut ◽  
Robert Akl
Keyword(s):  
Energy Efficiency ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Visible Light Communication ◽  
User Scheduling ◽  
Access Technology ◽  
Input Multiple Output ◽  
Simple Processing

The global bandwidth shortage in the wireless communication sector has motivated the study and exploration of wireless access technology known as massive Multiple-Input Multiple-Output (MIMO). Massive MIMO is one of the key enabling technology for next-generation networks, which groups together antennas at both transmitter and the receiver to provide high spectral and energy efficiency using relatively simple processing. Obtaining a better understating of the massive MIMO system to overcome the fundamental issues such as&nbsp;pilot contamination, channel estimation, precoding, user scheduling, energy efficiency, and signal detection is vital for the successful deployment of 5G and beyond networks. Some of the recent trends in massive MIMO are terahertz communication, ultra massive MIMO (UM-MIMO), visible light communication (VLC), machine learning, and deep learning.&nbsp;

scholarly journals Experimental Analysis of Concentrated versus Distributed Massive MIMO in an Indoor Cell at 3.5 GHz

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1646
Author(s):  
Jesús R. Pérez ◽  
Óscar Fernández ◽  
Luis Valle ◽  
Abla Bedoui ◽  
Mohamed Et-tolba ◽  
...  
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Access Network ◽  
Base Station ◽  
Mimo Channel ◽  
Power Imbalance ◽  
Channel Measurements

This paper presents a measurement-based comparison between distributed and concentrated massive multiple-input multiple-output (MIMO) systems, which are called D-mMIMO and C-mMIMO systems, in an indoor environment considering a 400 MHz bandwidth centered at 3.5 GHz. In both cases, we have considered an array of 64 antennas in the base station and eight simultaneously active users. The work focuses on the characterization of both schemes in the up-link, considering the analysis of the sum capacity, the total spectral efficiency (SE) achievable by using the zero forcing (ZF) combining method, as well as the user fairness. The effect of the power imbalance between the different transmitters or user terminal (UT) locations, and thus, the benefits of performing an adequate power control are also investigated. The differences between the C-mMIMO and D-mMIMO channel performances are explained through the observation of the structure of their respective measured channel matrices through parameters such as the condition number or the power imbalance between the channels established by each UT. The channel measurements have been performed in the frequency domain, emulating a massive MIMO system in the framework of a time-domain duplex orthogonal frequency multiple access network (TDD-OFDM-MIMO). The characterization of the MIMO channel is based on the virtual array technique for both C-mMIMO and D-mMIMO systems. The deployment of the C-mMIMO and D-MIMO systems, as well as the distribution of users in the measurement environment, has been arranged as realistically as possible, avoiding the movement of people or machines.

scholarly journals Precise Channel Estimation Approach for a mmWave MIMO System

2020 ◽  
Vol 10 (12) ◽  
pp. 4397 ◽  
Author(s):  
Prateek Saurabh Srivastav ◽  
Lan Chen ◽  
Arfan Haider Wahla
Keyword(s):  
Channel Estimation ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Low Rank ◽  
High Signal ◽  
Formidable Challenge ◽  
Input Multiple Output ◽  
Efficient Recovery

Channel estimation is a formidable challenge in mmWave Multiple Input Multiple Output (MIMO) systems due to the large number of antennas. Therefore, compressed sensing (CS) techniques are used to exploit channel sparsity at mmWave frequencies to calculate fewer dominant paths in mmWave channels. However, conventional CS techniques require a higher training overhead for efficient recovery. In this paper, an efficient extended alternation direction method of multipliers (Ex-ADMM) is proposed for mmWave channel estimation. In the proposed scheme, a joint optimization problem is formulated to exploit low rank and channel sparsity individually in the antenna domain. Moreover, a relaxation factor is introduced which improves the proposed algorithm’s convergence. Simulation experiments illustrate that the proposed algorithm converges at lower Normalized Mean Squared Error (NMSE) with improved spectral efficiency. The proposed algorithm also ameliorates NMSE performance at low, mid and high Signal to Noise (SNR) ranges.

Improved Port Modulation for Multiuser Massive MIMO Systems

2015 ◽  
Vol 7 (4) ◽  
pp. 15-25
Author(s):  
Yujiao He ◽  
Jianing Zhao ◽  
Lijuan Tao ◽  
Fuyu Hou ◽  
Wei Jia
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Channel State ◽  
State Information ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Simulation Results ◽  
Csi Feedback

This paper proposes an improved port modulation (PM) method which can be applied to the multiuser (MU) massive multiple-input multiple-output (MIMO) system. The precoding process of the improved PM can be divided into two parts: port precoding and MU precoding. The methods of the precoding and detection are provided and the performance of the proposed improved PM is simulated and analyzed. Simulation results show that the proposed improved PM system can achieve a satisfying bit error rate (BER) performance with a cutdown channel state information (CSI) feedback.

scholarly journals LDPC Coded Massive MIMO Systems

Entropy ◽  
2019 ◽  
Vol 21 (3) ◽  
pp. 231 ◽  
Author(s):  
Inho Hwang ◽  
Han Park ◽  
Jeong Lee
Keyword(s):  
Massive Mimo ◽  
Information Transfer ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Three Dimensional ◽  
Ldpc Codes ◽  
Low Complexity ◽  
Graph Representation ◽  
Factor Graph

We design a coded massive multiple-input multiple-output (MIMO) system using low-density parity-check (LDPC) codes and iterative joint detection and decoding (JDD) algorithm employing a low complexity detection. We introduce the factor graph representation of the LDPC coded massive MIMO system, based on which the message updating rule in the JDD is defined. We devise a tool for analyzing extrinsic information transfer (EXIT) characteristics of messages flowing in the JDD and the three-dimensional (3-D) EXIT chart provides a visualization of the JDD behavior. Based on the proposed 3-D EXIT analysis, we design jointly the degree distribution of irregular LDPC codes and the JDD strategy for the coded massive MIMO system. The JDD strategy was determined to achieve a higher error correction capability with a given amount of computational complexity. It was observed that the coded massive MIMO system equipped with the proposed LDPC codes and the proposed JDD strategy has lower bit error rate than conventional LDPC coded massive MIMO systems.

Sign in / Sign up

Export Citation Format

Share Document