scholarly journals Biometric Identification Based on Eye Movement Dynamic Features

Sensors ◽  
2021 ◽  
Vol 21 (18) ◽  
pp. 6020
Author(s):  
Katarzyna Harezlak ◽  
Michal Blasiak ◽  
Pawel Kasprowski
Keyword(s):  
Random Forest ◽  
Decision Tree ◽  
Eye Movement ◽  
Classification Performance ◽  
Biometric Identification ◽  
Largest Lyapunov Exponent ◽  
Dynamic Features ◽  
Signal Features ◽  
Good Classification Performance ◽  
Test Sets

The paper presents studies on biometric identification methods based on the eye movement signal. New signal features were investigated for this purpose. They included its representation in the frequency domain and the largest Lyapunov exponent, which characterizes the dynamics of the eye movement signal seen as a nonlinear time series. These features, along with the velocities and accelerations used in the previously conducted works, were determined for 100-ms eye movement segments. 24 participants took part in the experiment, composed of two sessions. The users’ task was to observe a point appearing on the screen in 29 locations. The eye movement recordings for each point were used to create a feature vector in two variants: one vector for one point and one vector including signal for three consecutive locations. Two approaches for defining the training and test sets were applied. In the first one, 75% of randomly selected vectors were used as the training set, under a condition of equal proportions for each participant in both sets and the disjointness of the training and test sets. Among four classifiers: kNN (k = 5), decision tree, naïve Bayes, and random forest, good classification performance was obtained for decision tree and random forest. The efficiency of the last method reached 100%. The outcomes were much worse in the second scenario when the training and testing sets when defined based on recordings from different sessions; the possible reasons are discussed in the paper.

scholarly journals Phybrata Sensors and Machine Learning for Enhanced Neurophysiological Diagnosis and Treatment

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7417
Author(s):  
Alex J. Hope ◽  
Utkarsh Vashisth ◽  
Matthew J. Parker ◽  
Andreas B. Ralston ◽  
Joshua M. Roper ◽  
...  
Keyword(s):  
Machine Learning ◽  
Time Series ◽  
Random Forest ◽  
Binary Classification ◽  
Classification Performance ◽  
Support Vector ◽  
Use Case ◽  
Signal Features ◽  
Test Population

Concussion injuries remain a significant public health challenge. A significant unmet clinical need remains for tools that allow related physiological impairments and longer-term health risks to be identified earlier, better quantified, and more easily monitored over time. We address this challenge by combining a head-mounted wearable inertial motion unit (IMU)-based physiological vibration acceleration (“phybrata”) sensor and several candidate machine learning (ML) models. The performance of this solution is assessed for both binary classification of concussion patients and multiclass predictions of specific concussion-related neurophysiological impairments. Results are compared with previously reported approaches to ML-based concussion diagnostics. Using phybrata data from a previously reported concussion study population, four different machine learning models (Support Vector Machine, Random Forest Classifier, Extreme Gradient Boost, and Convolutional Neural Network) are first investigated for binary classification of the test population as healthy vs. concussion (Use Case 1). Results are compared for two different data preprocessing pipelines, Time-Series Averaging (TSA) and Non-Time-Series Feature Extraction (NTS). Next, the three best-performing NTS models are compared in terms of their multiclass prediction performance for specific concussion-related impairments: vestibular, neurological, both (Use Case 2). For Use Case 1, the NTS model approach outperformed the TSA approach, with the two best algorithms achieving an F1 score of 0.94. For Use Case 2, the NTS Random Forest model achieved the best performance in the testing set, with an F1 score of 0.90, and identified a wider range of relevant phybrata signal features that contributed to impairment classification compared with manual feature inspection and statistical data analysis. The overall classification performance achieved in the present work exceeds previously reported approaches to ML-based concussion diagnostics using other data sources and ML models. This study also demonstrates the first combination of a wearable IMU-based sensor and ML model that enables both binary classification of concussion patients and multiclass predictions of specific concussion-related neurophysiological impairments.

scholarly journals Energy Consumption Load Forecasting Using a Level-Based Random Forest Classifier

Symmetry ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 956 ◽  
Author(s):  
Yu-Tung Chen ◽  
Eduardo Piedad ◽  
Cheng-Chien Kuo
Keyword(s):  
Pattern Recognition ◽  
Random Forest ◽  
Conventional Method ◽  
Random Permutation ◽  
Classification Performance ◽  
World Energy ◽  
Cross Training ◽  
Good Classification Performance ◽  
Pattern Recognition Approach ◽  
Repeated Runs

Energy consumers may not know whether their next-hour forecasted load is either high or low based on the actual value predicted from their historical data. A conventional method of level prediction with a pattern recognition approach was performed by first predicting the actual numerical values using typical pattern-based regression models, hen classifying them into pattern levels (e.g., low, average, and high). A proposed prediction with pattern recognition scheme was developed to directly predict the desired levels using simpler classifier models without undergoing regression. The proposed pattern recognition classifier was compared to its regression method using a similar algorithm applied to a real-world energy dataset. A random forest (RF) algorithm which outperformed other widely used machine learning (ML) techniques in previous research was used in both methods. Both schemes used similar parameters for training and testing simulations. After 10-time cross training validation and five averaged repeated runs with random permutation per data splitting, the proposed classifier shows better computation speed and higher classification accuracy than the conventional method. However, when the number of its desired levels increases, its prediction accuracy seems to decrease and approaches the accuracy of the conventional method. The developed energy level prediction, which is computationally inexpensive and has a good classification performance, can serve as an alternative forecasting scheme.

A Study on the Auxiliary Diagnosis of Thyroid Disease Images Based on Multiple Dimensional Deep Learning Algorithms

2020 ◽  
Vol 16 (3) ◽  
pp. 199-205
Author(s):  
Yuejun Liu ◽  
Yifei Xu ◽  
Xiangzheng Meng ◽  
Xuguang Wang ◽  
Tianxu Bai
Keyword(s):  
Deep Learning ◽  
Learning Algorithms ◽  
Region Of Interest ◽  
Classification Performance ◽  
Thyroid Diseases ◽  
Great Success ◽  
Learning Models ◽  
Good Classification Performance ◽  
Spect Images

Background: Medical imaging plays an important role in the diagnosis of thyroid diseases. In the field of machine learning, multiple dimensional deep learning algorithms are widely used in image classification and recognition, and have achieved great success. Objective: The method based on multiple dimensional deep learning is employed for the auxiliary diagnosis of thyroid diseases based on SPECT images. The performances of different deep learning models are evaluated and compared. Methods: Thyroid SPECT images are collected with three types, they are hyperthyroidism, normal and hypothyroidism. In the pre-processing, the region of interest of thyroid is segmented and the amount of data sample is expanded. Four CNN models, including CNN, Inception, VGG16 and RNN, are used to evaluate deep learning methods. Results: Deep learning based methods have good classification performance, the accuracy is 92.9%-96.2%, AUC is 97.8%-99.6%. VGG16 model has the best performance, the accuracy is 96.2% and AUC is 99.6%. Especially, the VGG16 model with a changing learning rate works best. Conclusion: The standard CNN, Inception, VGG16, and RNN four deep learning models are efficient for the classification of thyroid diseases with SPECT images. The accuracy of the assisted diagnostic method based on deep learning is higher than that of other methods reported in the literature.

Document Preprocessing with TF-IDF to Improve the Polarity Classification Performance of Unstructured Sentiment Analysis

2020 ◽  
pp. 235-242
Author(s):  
Farrikh Alzami ◽  
Erika Devi Udayanti ◽  
Dwi Puji Prabowo ◽  
Rama Aria Megantara
Keyword(s):  
Machine Learning ◽  
Feature Extraction ◽  
Random Forest ◽  
Sentiment Analysis ◽  
Classification Performance ◽  
Document Preparation ◽  
Learning Models ◽  
Polarity Classification ◽  
Negative Sentiment ◽  
Machine Learning Models

Sentiment analysis in terms of polarity classification is very important in everyday life, with the existence of polarity, many people can find out whether the respected document has positive or negative sentiment so that it can help in choosing and making decisions. Sentiment analysis usually done manually. Therefore, an automatic sentiment analysis classification process is needed. However, it is rare to find studies that discuss extraction features and which learning models are suitable for unstructured sentiment analysis types with the Amazon food review case. This research explores some extraction features such as Word Bags, TF-IDF, Word2Vector, as well as a combination of TF-IDF and Word2Vector with several machine learning models such as Random Forest, SVM, KNN and Naïve Bayes to find out a combination of feature extraction and learning models that can help add variety to the analysis of polarity sentiments. By assisting with document preparation such as html tags and punctuation and special characters, using snowball stemming, TF-IDF results obtained with SVM are suitable for obtaining a polarity classification in unstructured sentiment analysis for the case of Amazon food review with a performance result of 87,3 percent.

scholarly journals Transformer Oil Quality Assessment Using Random Forest with Feature Engineering

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1809
Author(s):  
Mohammed El Amine Senoussaoui ◽  
Mostefa Brahami ◽  
Issouf Fofana
Keyword(s):  
Machine Learning ◽  
Random Forest ◽  
Oil Quality ◽  
Principal Component ◽  
Condition Assessment ◽  
Classification Performance ◽  
Transformer Oil ◽  
Classification Model ◽  
Insulation Degradation ◽  
Transformer Oils

Machine learning is widely used as a panacea in many engineering applications including the condition assessment of power transformers. Most statistics attribute the main cause of transformer failure to insulation degradation. Thus, a new, simple, and effective machine-learning approach was proposed to monitor the condition of transformer oils based on some aging indicators. The proposed approach was used to compare the performance of two machine-learning classifiers: J48 decision tree and random forest. The service-aged transformer oils were classified into four groups: the oils that can be maintained in service, the oils that should be reconditioned or filtered, the oils that should be reclaimed, and the oils that must be discarded. From the two algorithms, random forest exhibited a better performance and high accuracy with only a small amount of data. Good performance was achieved through not only the application of the proposed algorithm but also the approach of data preprocessing. Before feeding the classification model, the available data were transformed using the simple k-means method. Subsequently, the obtained data were filtered through correlation-based feature selection (CFsSubset). The resulting features were again retransformed by conducting the principal component analysis and were passed through the CFsSubset filter. The transformation and filtration of the data improved the classification performance of the adopted algorithms, especially random forest. Another advantage of the proposed method is the decrease in the number of the datasets required for the condition assessment of transformer oils, which is valuable for transformer condition monitoring.

scholarly journals Machine Learning in Aging: An Example of Developing Prediction Models for Serious Fall Injury in Older Adults

2020 ◽  
Vol 4 (Supplement_1) ◽  
pp. 268-269
Author(s):  
Jaime Speiser ◽  
Kathryn Callahan ◽  
Jason Fanning ◽  
Thomas Gill ◽  
Anne Newman ◽  
...  
Keyword(s):  
Machine Learning ◽  
Older Adults ◽  
Random Forest ◽  
Decision Tree ◽  
Prediction Models ◽  
Receiver Operating Curve ◽  
Learning Methods ◽  
Life Study ◽  
Fall Injury ◽  
Machine Learning Methods

Abstract Advances in computational algorithms and the availability of large datasets with clinically relevant characteristics provide an opportunity to develop machine learning prediction models to aid in diagnosis, prognosis, and treatment of older adults. Some studies have employed machine learning methods for prediction modeling, but skepticism of these methods remains due to lack of reproducibility and difficulty understanding the complex algorithms behind models. We aim to provide an overview of two common machine learning methods: decision tree and random forest. We focus on these methods because they provide a high degree of interpretability. We discuss the underlying algorithms of decision tree and random forest methods and present a tutorial for developing prediction models for serious fall injury using data from the Lifestyle Interventions and Independence for Elders (LIFE) study. Decision tree is a machine learning method that produces a model resembling a flow chart. Random forest consists of a collection of many decision trees whose results are aggregated. In the tutorial example, we discuss evaluation metrics and interpretation for these models. Illustrated in data from the LIFE study, prediction models for serious fall injury were moderate at best (area under the receiver operating curve of 0.54 for decision tree and 0.66 for random forest). Machine learning methods may offer improved performance compared to traditional models for modeling outcomes in aging, but their use should be justified and output should be carefully described. Models should be assessed by clinical experts to ensure compatibility with clinical practice.

Sign in / Sign up

Export Citation Format

Share Document