scholarly journals Depth Data Denoising in Optical Laser Based Sensors for Metal Sheet Flatness Measurement: A Deep Learning Approach

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7024
Author(s):  
Marcos Alonso ◽  
Daniel Maestro ◽  
Alberto Izaguirre ◽  
Imanol Andonegui ◽  
Manuel Graña
Keyword(s):  
Deep Learning ◽  
Optical Sensors ◽  
Optical Measurement ◽  
Image Data ◽  
Real Data ◽  
Noise Removal ◽  
Metal Sheet ◽  
Superior Performance ◽  
Range Image ◽  
Range Images

Surface flatness assessment is necessary for quality control of metal sheets manufactured from steel coils by roll leveling and cutting. Mechanical-contact-based flatness sensors are being replaced by modern laser-based optical sensors that deliver accurate and dense reconstruction of metal sheet surfaces for flatness index computation. However, the surface range images captured by these optical sensors are corrupted by very specific kinds of noise due to vibrations caused by mechanical processes like degreasing, cleaning, polishing, shearing, and transporting roll systems. Therefore, high-quality flatness optical measurement systems strongly depend on the quality of image denoising methods applied to extract the true surface height image. This paper presents a deep learning architecture for removing these specific kinds of noise from the range images obtained by a laser based range sensor installed in a rolling and shearing line, in order to allow accurate flatness measurements from the clean range images. The proposed convolutional blind residual denoising network (CBRDNet) is composed of a noise estimation module and a noise removal module implemented by specific adaptation of semantic convolutional neural networks. The CBRDNet is validated on both synthetic and real noisy range image data that exhibit the most critical kinds of noise that arise throughout the metal sheet production process. Real data were obtained from a single laser line triangulation flatness sensor installed in a roll leveling and cut to length line. Computational experiments over both synthetic and real datasets clearly demonstrate that CBRDNet achieves superior performance in comparison to traditional 1D and 2D filtering methods, and state-of-the-art CNN-based denoising techniques. The experimental validation results show a reduction in error than can be up to 15% relative to solutions based on traditional 1D and 2D filtering methods and between 10% and 3% relative to the other deep learning denoising architectures recently reported in the literature.

scholarly journals Deep prediction of investor interest: A supervised clustering approach

2021 ◽  
Vol 8 (3-4) ◽  
pp. 77-89
Author(s):  
Baptiste Barreau ◽  
Laurent Carlier ◽  
Damien Challet
Keyword(s):  
Deep Learning ◽  
Stock Market ◽  
Real World ◽  
Real Data ◽  
Time Frame ◽  
Superior Performance ◽  
Supervised Clustering ◽  
Clustering Approach ◽  
Spanish Stock Market

We propose a novel deep learning architecture suitable for the prediction of investor interest for a given asset in a given time frame. This architecture performs both investor clustering and modelling at the same time. We first verify its superior performance on a synthetic scenario inspired by real data and then apply it to two real-world databases, a publicly available dataset about the position of investors in Spanish stock market and proprietary data from BNP Paribas Corporate and Institutional Banking.1,2

scholarly journals DEVELOPMENT OF INTEGRATION AND ADJUSTMENT METHOD FOR SEQUENTIAL RANGE IMAGES

2015 ◽  
Vol XL-4/W5 ◽  
pp. 177-181
Author(s):  
K. Nagara ◽  
T. Fuse
Keyword(s):  
Point Cloud ◽  
Integration Method ◽  
Three Dimensional ◽  
Real Data ◽  
Bundle Adjustment ◽  
Single Shot ◽  
Range Image ◽  
Range Images ◽  
Error Adjustment ◽  
Iterative Closest Point Algorithm

With increasing widespread use of three-dimensional data, the demand for simplified data acquisition is also increasing. The range camera, which is a simplified sensor, can acquire a dense-range image in a single shot; however, its measuring coverage is narrow and its measuring accuracy is limited. The former drawback had be overcome by registering sequential range images. This method, however, assumes that the point cloud is error-free. In this paper, we develop an integration method for sequential range images with error adjustment of the point cloud. The proposed method consists of ICP (Iterative Closest Point) algorithm and self-calibration bundle adjustment. The ICP algorithm is considered an initial specification for the bundle adjustment. By applying the bundle adjustment, coordinates of the point cloud are modified and the camera poses are updated. Through experimentation on real data, the efficiency of the proposed method has been confirmed.

scholarly journals Detection of Apple Lesions in Orchards Based on Deep Learning Methods of CycleGAN and YOLOV3-Dense

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Yunong Tian ◽  
Guodong Yang ◽  
Zhe Wang ◽  
En Li ◽  
Zize Liang
Keyword(s):  
Neural Network ◽  
Deep Learning ◽  
Optical Sensors ◽  
Data Augmentation ◽  
Image Data ◽  
Disease Diagnosis ◽  
Lesion Detection ◽  
Training Data ◽  
Yield Reduction ◽  
Learning Technology

Plant disease is one of the primary causes of crop yield reduction. With the development of computer vision and deep learning technology, autonomous detection of plant surface lesion images collected by optical sensors has become an important research direction for timely crop disease diagnosis. In this paper, an anthracnose lesion detection method based on deep learning is proposed. Firstly, for the problem of insufficient image data caused by the random occurrence of apple diseases, in addition to traditional image augmentation techniques, Cycle-Consistent Adversarial Network (CycleGAN) deep learning model is used in this paper to accomplish data augmentation. These methods effectively enrich the diversity of training data and provide a solid foundation for training the detection model. In this paper, on the basis of image data augmentation, densely connected neural network (DenseNet) is utilized to optimize feature layers of the YOLO-V3 model which have lower resolution. DenseNet greatly improves the utilization of features in the neural network and enhances the detection result of the YOLO-V3 model. It is verified in experiments that the improved model exceeds Faster R-CNN with VGG16 NET, the original YOLO-V3 model, and other three state-of-the-art networks in detection performance, and it can realize real-time detection. The proposed method can be well applied to the detection of anthracnose lesions on apple surfaces in orchards.

scholarly journals Forecasting Corporate Failure in the Chinese Energy Sector: A Novel Integrated Model of Deep Learning and Support Vector Machine

Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2251 ◽  
Author(s):  
Wei Xu ◽  
Yuchen Pan ◽  
Wenting Chen ◽  
Hongyong Fu
Keyword(s):  
Support Vector Machine ◽  
Deep Learning ◽  
Numerical Data ◽  
Real Data ◽  
Integrated Model ◽  
Energy Sector ◽  
Superior Performance ◽  
Support Vector ◽  
Corporate Failure ◽  
Textual Data

Accurate forecasts of corporate failure in the Chinese energy sector are drivers for both operational excellence in the national energy systems and sustainable investment of the energy sector. This paper proposes a novel integrated model (NIM) for corporate failure forecasting in the Chinese energy sector by considering textual data and numerical data simultaneously. Given the feature of textual data and numerical data, convolutional neural network oriented deep learning (CNN-DL) and support vector machine (SVM) are employed as the base classifiers to forecast using textual data and numerical data, respectively. Subsequently, soft set (SS) theory is applied to integrate outputs of CNN-DL and SVM. Hence, NIM inherits advantages and avoids disadvantages of CNN-DL, SVM, and SS. It is able to improve the forecasting performance by taking full use of textual data and numerical data. For verification, NIM is applied to the real data of Chinese listed energy firms. Empirical results indicate that, compared with benchmarks, NIM demonstrates superior performance of corporate failure forecasting in the Chinese energy sector.

scholarly journals Automated Detection and Segmentation of Grain Spikes in Greenhouse Images Using Shallow and Deep Learning Neural Networks: A Comparison of Six Methods

2021 ◽  
Author(s):  
Sajid Ullah ◽  
Michael Henke ◽  
Narendra Narisetti ◽  
Jan Hejatko ◽  
Evgeny Gladilin
Keyword(s):  
Image Segmentation ◽  
Deep Learning ◽  
Image Data ◽  
Automated Analysis ◽  
Machine Learning Techniques ◽  
Superior Performance ◽  
Plant Phenotyping ◽  
Learning Techniques ◽  
Whole Plant ◽  
Comprehensive Comparison

Abstract Image-based plant phenotyping is the major approach to quantitative assessment of important plant properties. For automated analysis of a large amount of image data from high-throughput greenhouse measurements, efficient techniques for image segmentation are required. However, conventional approaches to whole plant and plant organ segmentation are hampered by high variability of plant and background illumination, and naturally occurring changes in geometry and colors of growing plants. Consequently, application of advanced machine learning techniques for automated image segmentation is required. Here, we investigate six advanced neural network (NN) methods for detection and segmentation of grain spikes in RGB images including three detection deep NNs (SSD, Faster-RCNN, YOLOv3/v4), two deep (U-Net, DeepLabv3+) and one shallow segmentation NNs. Our experimental results show superior performance of deep learning NNs that achieve in average more than 90% accuracy by detection and segmentation of wheat as well as barley and rye spikes. However, different methods demonstrate different performance on matured, emergent and occluded spikes. In addition to comprehensive comparison of six NN methods, a GUI-based tool (SpikeApp) provided with this work demonstrates the application of detection and segmentation NNs to fully automated spike phenotyping. Further improvements of evaluated NN approaches are discussed.

Deep Learning Approaches for Whiteboard Image Quality Enhancement

2019 ◽  
Vol 2019 (1) ◽  
pp. 360-368
Author(s):  
Mekides Assefa Abebe ◽  
Jon Yngve Hardeberg
Keyword(s):  
Deep Learning ◽  
Image Quality ◽  
Image Data ◽  
Quality Enhancement ◽  
Network Architectures ◽  
Learning Approaches ◽  
Data Set ◽  
Image Quality Enhancement ◽  
Processing Techniques ◽  
White Balancing

Different whiteboard image degradations highly reduce the legibility of pen-stroke content as well as the overall quality of the images. Consequently, different researchers addressed the problem through different image enhancement techniques. Most of the state-of-the-art approaches applied common image processing techniques such as background foreground segmentation, text extraction, contrast and color enhancements and white balancing. However, such types of conventional enhancement methods are incapable of recovering severely degraded pen-stroke contents and produce artifacts in the presence of complex pen-stroke illustrations. In order to surmount such problems, the authors have proposed a deep learning based solution. They have contributed a new whiteboard image data set and adopted two deep convolutional neural network architectures for whiteboard image quality enhancement applications. Their different evaluations of the trained models demonstrated their superior performances over the conventional methods.

A Survey of Network Embedding for Drug Analysis and Prediction

2020 ◽  
Vol 21 ◽  
Author(s):  
Zhixian Liu ◽  
Qingfeng Chen ◽  
Wei Lan ◽  
Jiahai Liang ◽  
Yiping Pheobe Chen ◽  
...  
Keyword(s):  
Deep Learning ◽  
Protein Function ◽  
Dimensional Space ◽  
Auxiliary Information ◽  
Matrix Decomposition ◽  
Drug Analysis ◽  
Machine Learning Algorithms ◽  
Superior Performance ◽  
Network Embedding ◽  
Similarity Estimation

: Traditional network-based computational methods have shown good results in drug analysis and prediction. However, these methods are time consuming and lack universality, and it is difficult to exploit the auxiliary information of nodes and edges. Network embedding provides a promising way for alleviating the above problems by transforming network into a low-dimensional space while preserving network structure and auxiliary information. This thus facilitates the application of machine learning algorithms for subsequent processing. Network embedding has been introduced into drug analysis and prediction in the last few years, and has shown superior performance over traditional methods. However, there is no systematic review of this issue. This article offers a comprehensive survey of the primary network embedding methods and their applications in drug analysis and prediction. The network embedding technologies applied in homogeneous network and heterogeneous network are investigated and compared, including matrix decomposition, random walk, and deep learning. Especially, the Graph neural network (GNN) methods in deep learning are highlighted. Further, the applications of network embedding in drug similarity estimation, drug-target interaction prediction, adverse drug reactions prediction, protein function and therapeutic peptides prediction are discussed. Several future potential research directions are also discussed.

scholarly journals Deep convolutional neural networks for cardiovascular vulnerable plaque detection

2019 ◽  
Vol 277 ◽  
pp. 02024 ◽  
Author(s):  
Lincan Li ◽  
Tong Jia ◽  
Tianqi Meng ◽  
Yizhe Liu
Keyword(s):  
Neural Networks ◽  
Deep Learning ◽  
Convolutional Neural Networks ◽  
Vulnerable Plaque ◽  
Recall Rate ◽  
Superior Performance ◽  
Learning Approaches ◽  
Deep Convolutional Neural Networks ◽  
Vulnerable Plaques ◽  
Plaque Detection

In this paper, an accurate two-stage deep learning method is proposed to detect vulnerable plaques in ultrasonic images of cardiovascular. Firstly, a Fully Convonutional Neural Network (FCN) named U-Net is used to segment the original Intravascular Optical Coherence Tomography (IVOCT) cardiovascular images. We experiment on different threshold values to find the best threshold for removing noise and background in the original images. Secondly, a modified Faster RCNN is adopted to do precise detection. The modified Faster R-CNN utilize six-scale anchors (122,162,322,642,1282,2562) instead of the conventional one scale or three scale approaches. First, we present three problems in cardiovascular vulnerable plaque diagnosis, then we demonstrate how our method solve these problems. The proposed method in this paper apply deep convolutional neural networks to the whole diagnostic procedure. Test results show the Recall rate, Precision rate, IoU (Intersection-over-Union) rate and Total score are 0.94, 0.885, 0.913 and 0.913 respectively, higher than the 1st team of CCCV2017 Cardiovascular OCT Vulnerable Plaque Detection Challenge. AP of the designed Faster RCNN is 83.4%, higher than conventional approaches which use one-scale or three-scale anchors. These results demonstrate the superior performance of our proposed method and the power of deep learning approaches in diagnose cardiovascular vulnerable plaques.

scholarly journals A New Extension of Thinning-Based Integer-Valued Autoregressive Models for Count Data

Entropy ◽  
2020 ◽  
Vol 23 (1) ◽  
pp. 62
Author(s):  
Zhengwei Liu ◽  
Fukang Zhu
Keyword(s):  
Likelihood Estimation ◽  
Real Data ◽  
Autoregressive Models ◽  
Superior Performance ◽  
Data Sets ◽  
Binomial Thinning ◽  
Free Case ◽  
Two Parameters ◽  
Conditional Maximum ◽  
Thinning Operator

The thinning operators play an important role in the analysis of integer-valued autoregressive models, and the most widely used is the binomial thinning. Inspired by the theory about extended Pascal triangles, a new thinning operator named extended binomial is introduced, which is a general case of the binomial thinning. Compared to the binomial thinning operator, the extended binomial thinning operator has two parameters and is more flexible in modeling. Based on the proposed operator, a new integer-valued autoregressive model is introduced, which can accurately and flexibly capture the dispersed features of counting time series. Two-step conditional least squares (CLS) estimation is investigated for the innovation-free case and the conditional maximum likelihood estimation is also discussed. We have also obtained the asymptotic property of the two-step CLS estimator. Finally, three overdispersed or underdispersed real data sets are considered to illustrate a superior performance of the proposed model.

scholarly journals Fast Multi-Focus Fusion Based on Deep Learning for Early-Stage Embryo Image Enhancement

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 863
Author(s):  
Vidas Raudonis ◽  
Agne Paulauskaite-Taraseviciene ◽  
Kristina Sutiene
Keyword(s):  
Deep Learning ◽  
Image Fusion ◽  
Early Stage ◽  
Image Data ◽  
Cell Detection ◽  
Processing Times ◽  
Fused Image ◽  
Stage Embryo ◽  
Early Stage Embryo

Background: Cell detection and counting is of essential importance in evaluating the quality of early-stage embryo. Full automation of this process remains a challenging task due to different cell size, shape, the presence of incomplete cell boundaries, partially or fully overlapping cells. Moreover, the algorithm to be developed should process a large number of image data of different quality in a reasonable amount of time. Methods: Multi-focus image fusion approach based on deep learning U-Net architecture is proposed in the paper, which allows reducing the amount of data up to 7 times without losing spectral information required for embryo enhancement in the microscopic image. Results: The experiment includes the visual and quantitative analysis by estimating the image similarity metrics and processing times, which is compared to the results achieved by two wellknown techniques—Inverse Laplacian Pyramid Transform and Enhanced Correlation Coefficient Maximization. Conclusion: Comparatively, the image fusion time is substantially improved for different image resolutions, whilst ensuring the high quality of the fused image.

Sign in / Sign up

Export Citation Format

Share Document