scholarly journals Reversible Room Temperature H2 Gas Sensing Based on Self-Assembled Cobalt Oxysulfide

Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 303
Author(s):  
Hui Zhou ◽  
Kai Xu ◽  
Nam Ha ◽  
Yinfen Cheng ◽  
Rui Ou ◽  
...  

Reversible H2 gas sensing at room temperature has been highly desirable given the booming of the Internet of Things (IoT), zero-emission vehicles, and fuel cell technologies. Conventional metal oxide-based semiconducting gas sensors have been considered as suitable candidates given their low-cost, high sensitivity, and long stability. However, the dominant sensing mechanism is based on the chemisorption of gas molecules which requires elevated temperatures to activate the catalytic reaction of target gas molecules with chemisorbed O, leaving the drawbacks of high-power consumption and poor selectivity. In this work, we introduce an alternative candidate of cobalt oxysulfide derived from the calcination of self-assembled cobalt sulfide micro-cages. It is found that the majority of S atoms are replaced by O in cobalt oxysulfide, transforming the crystal structure to tetragonal coordination and slightly expanding the optical bandgap energy. The H2 gas sensing performances of cobalt oxysulfide are fully reversible at room temperature, demonstrating peculiar p-type gas responses with a magnitude of 15% for 1% H2 and a high degree of selectivity over CH4, NO2, and CO2. Such excellent performances are possibly ascribed to the physisorption dominating the gas–matter interaction. This work demonstrates the great potentials of transition metal oxysulfide compounds for room-temperature fully reversible gas sensing.

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 317 ◽  
Author(s):  
Haihong Yin ◽  
Changqing Song ◽  
Zhiliang Wang ◽  
Haibao Shao ◽  
Yi Li ◽  
...  

VO2(B), VO2(M), and V2O5 are the most famous compounds in the vanadium oxide family. Here, their gas-sensing properties were investigated and compared. VO2(B) nanoflakes were first self-assembled via a hydrothermal method, and then VO2(M) and V2O5 nanoflakes were obtained after a heat-phase transformation in nitrogen and air, respectively. Their microstructures were evaluated using X-ray diffraction and scanning and transmission electron microscopies, respectively. Gas sensing measurements indicated that VO2(M) nanoflakes were gas-insensitive, while both VO2(B) and V2O5 nanoflakes were highly selective to ammonia at room temperature. As ammonia sensors, both VO2(B) and V2O5 nanoflakes showed abnormal p-type sensing characteristics, although vanadium oxides are generally considered as n-type semiconductors. Moreover, V2O5 nanoflakes exhibited superior ammonia sensing performance compared to VO2(B) nanoflakes, with one order of magnitude higher sensitivity, a shorter response time of 14–22 s, and a shorter recovery time of 14–20 s. These characteristics showed the excellent potential of V2O5 nanostructures as ammonia sensors.


2019 ◽  
Vol 1 (5) ◽  
pp. 2009-2017 ◽  
Author(s):  
E. Petromichelaki ◽  
E. Gagaoudakis ◽  
K. Moschovis ◽  
L. Tsetseris ◽  
T. D. Anthopoulos ◽  
...  

The fundamental development of the design of novel self-powered ozone sensing elements, operating at room temperature, based on p-type metal oxides paves the way to a new class of low cost, highly promising gas sensing devices.


2020 ◽  
Vol 814 ◽  
pp. 152284 ◽  
Author(s):  
Jun Wang ◽  
Shuangshuang Jiang ◽  
Huiling Liu ◽  
Shuhong Wang ◽  
Qingjiang Pan ◽  
...  

2015 ◽  
Vol 119 (52) ◽  
pp. 29186-29192 ◽  
Author(s):  
Ruey-Chi Wang ◽  
Yu-Xian Lin ◽  
Jia-Jun Wu

Author(s):  
Monika Kwoka ◽  
Michal A. Borysiewicz ◽  
Pawel Tomkiewicz ◽  
Anna Piotrowska ◽  
Jacek Szuber

In this paper a novel type of a highly sensitive gas sensor device based on the surface photovoltage effect is described. The developed surface photovoltage gas sensor is based on a reverse Kelvin probe approach. As the active gas sensing electrode the porous ZnO nanostructured thin films are used deposited by the direct current (DC) reactive magnetron sputtering method exhibiting the nanocoral surface morphology combined with an evident surface nonstoichiometry related to the unintentional surface carbon and water vapor contaminations. Among others, the demonstrated SPV gas sensor device exhibits a high sensitivity of 1 ppm to NO2 with a signal to noise ratio of about 50 and a fast response time of several seconds under the room temperature conditions.


2019 ◽  
Vol 285 ◽  
pp. 92-107 ◽  
Author(s):  
Ioannis Kortidis ◽  
Hendrik C. Swart ◽  
Suprakas Sinha Ray ◽  
David E. Motaung

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sweejiang Yoo ◽  
Xin Li ◽  
Yuan Wu ◽  
Weihua Liu ◽  
Xiaoli Wang ◽  
...  

Reduced graphene oxide (rGO) based chemiresistor gas sensor has received much attention in gas sensing for high sensitivity, room temperature operation, and reversible. Here, for the first time, we present a promising chemiresistor for ammonia gas detection based on tannic acid (TA) functionalized and reduced graphene oxide (rGOTA functionalized). Green reductant of TA plays a major role in both reducing process and enhancing the gas sensing properties ofrGOTA functionalized. Our results showrGOTA functionalizedonly selective to ammonia with excellent respond, recovery, respond time, and recovery times.rGOTA functionalizedelectrical resistance decreases upon exposure to NH3where we postulated that it is due to n-doping by TA and charge transfer betweenrGOTA functionalizedand NH3through hydrogen bonding. Furthermore,rGOTA functionalizedhinders the needs for stimulus for both recovery and respond. The combination of greener sensing material and simplicity in overall sensor design provides a new sight for green reductant approach of rGO based chemiresistor gas sensor.


Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 785 ◽  
Author(s):  
Wen-Dong Zhou ◽  
Davoud Dastan ◽  
Jing Li ◽  
Xi-Tao Yin ◽  
Qi Wang

Metal oxide semiconductor (MOS) gas sensors have the advantages of high sensitivity, short response-recovery time and long-term stability. However, the shortcoming of poor discriminability of homogeneous gases limits their applications in gas sensors. It is well-known that the MOS materials have similar gas sensing responses to homogeneous gases such as CO and H2, so it is difficult for these gas sensors to distinguish the two gases. In this paper, simple sol–gel method was employed to obtain the ZnO–xNiO composites. Gas sensing performance results illustrated that the gas sensing properties of composites with x > 0.425 showed a p-type response to both CO and H2, while the gas sensing properties of composites with x < 0.425 showed an n-type response to both CO and H2. However, it was interesting that ZnO–0.425NiO showed a p-type response to CO but an discriminable response (n-type) to H2, which indicated that modulating the p-type or n-type semiconductor concentration in p-n composites could be an effective method with which to improve the discriminability of this type of gas sensor regarding CO and H2. The phenomenon of the special gas sensing behavior of ZnO–0.425NiO was explained based on the experimental observations and a range of characterization techniques, including XRD, HRTEM and XPS, in detail.


2019 ◽  
Vol 288 ◽  
pp. 625-633 ◽  
Author(s):  
Hwan-Seok Jeong ◽  
Min-Jae Park ◽  
Soo-Hun Kwon ◽  
Hyo-Jun Joo ◽  
Hyuck-In Kwon

Sign in / Sign up

Export Citation Format

Share Document