scholarly journals Portable XRF Quick-Scan Mapping for Potential Toxic Elements Pollutants in Sustainable Urban Drainage Systems: A Methodological Approach

Sci ◽  
2020 ◽  
Vol 2 (2) ◽  
pp. 46
Author(s):  
Guri Venvik ◽  
Floris C. Boogaard
Keyword(s):  
Green Infrastructure ◽  
Urban Areas ◽  
Toxic Elements ◽  
Urban Drainage ◽  
Runoff Water ◽  
Portable Xrf ◽  
Potential Toxic Elements ◽  
Drainage Systems ◽  
Urban Drainage Systems

Sustainable urban drainage systems (SuDS) such as swales are designed to collect, store and infiltrate a large amount of surface runoff water during heavy rainfall. Stormwater is known to transport pollutants, such as particle-bound Potential Toxic Elements (PTE), which are known to often accumulate in the topsoil. A portable XRF instrument (pXRF) is used to provide in situ spatial characterization of soil pollutants, specifically lead (Pb), zink (Zn) and copper (Cu). The method uses pXRF measurements of PTE along profiles with set intervals (1 meter) to cover the swale with cross-sections, across the inlet, the deepest point and the outlet. Soil samples are collected, and the In-Situ measurements are verified by the results from laboratory analyses. Stormwater is here shown to be the transporting media for the pollutants, so it is of importance to investigate areas most prone to flooding and infiltration. This quick scan method is time and cost-efficient, easy to execute and the results are comparable to any known (inter)national threshold criteria for polluted soils. The results are of great importance for all stakeholders in cities that are involved in climate adaptation and implementing green infrastructure in urban areas. However, too little is still known about the long-term functioning of the soil-based SuDS facilities.

scholarly journals Portable XRF Quick-Scan Mapping for Potential Toxic Elements Pollutants in Sustainable urban Drainage Systems: A Methodological Approach

Sci ◽  
2020 ◽  
Vol 2 (2) ◽  
pp. 34
Author(s):  
Guri Venvik ◽  
Floris C. Boogaard
Keyword(s):  
Green Infrastructure ◽  
Urban Areas ◽  
Toxic Elements ◽  
Urban Drainage ◽  
Runoff Water ◽  
Portable Xrf ◽  
Potential Toxic Elements ◽  
Drainage Systems ◽  
Urban Drainage Systems

Sustainable urban drainage systems (SuDS) such as swales are designed to collect, store and infiltrate a large amount of surface runoff water during heavy rainfall. Stormwater is known to transport pollutants, such as particle-bound Potential Toxic Elements (PTE), which are known to often accumulate in the topsoil. A portable XRF instrument (pXRF) is used to provide in situ spatial characterization of soil pollutants, specifically lead (Pb), zink (Zn) and copper (Cu). The method uses pXRF measurements of PTE along profiles with set intervals (1 m) to cover the swale with cross-sections, across the inlet, the deepest point and the outlet. Soil samples are collected, and the In-Situ measurements are verified by the results from laboratory analyses. Stormwater is here shown to be the transporting media for the pollutants, so it is of importance to investigate areas most prone to flooding and infiltration. This quick scan method is time and cost-efficient, easy to execute and the results are comparable to any known (inter)national threshold criteria for polluted soils. The results are of great importance for all stakeholders in cities that are involved in climate adaptation and implementing green infrastructure in urban areas. However, too little is still known about the long-term functioning of the soil-based SuDS facilities.

scholarly journals Portable XRF Quick-Scan Mapping for Potential Toxic Elements Pollutants in Sustainable urban Drainage Systems: A Methodological Approach

Sci ◽  
2020 ◽  
Vol 2 (2) ◽  
pp. 21 ◽  
Author(s):  
Guri Venvik ◽  
Floris C. Boogaard
Keyword(s):  
Green Infrastructure ◽  
Urban Areas ◽  
Toxic Elements ◽  
Urban Drainage ◽  
Runoff Water ◽  
Portable Xrf ◽  
Potential Toxic Elements ◽  
Drainage Systems ◽  
Urban Drainage Systems

Sustainable urban drainage systems (SuDS) such as swales are designed to collect, store and infiltrate a large amount of surface runoff water during heavy rainfall. Stormwater is known to transport pollutants, such as particle-bound Potential Toxic Elements (PTE), which are known to often accumulate in the topsoil. A portable XRF instrument (pXRF) is used to provide in situ spatial characterization of soil pollutants, specifically lead (Pb), zink (Zn) and copper (Cu). The method uses pXRF measurements of PTE along profiles with set intervals (1 m) to cover the swale with cross-sections, across the inlet, the deepest point and the outlet. Soil samples are collected, and the In-Situ measurements are verified by the results from laboratory analyses. Stormwater is here shown to be the transporting media for the pollutants, so it is of importance to investigate areas most prone to flooding and infiltration. This quick scan method is time and cost-efficient, easy to execute and the results are comparable to any known (inter)national threshold criteria for polluted soils. The results are of great importance for all stakeholders in cities that are involved in climate adaptation and implementing green infrastructure in urban areas. However, too little is still known about the long-term functioning of the soil-based SuDS facilities.

scholarly journals Portable XRF Quick-Scan Mapping for Potential Toxic Elements Pollutants in Sustainable Urban Drainage Systems: A Methodological Approach

Sci ◽  
2020 ◽  
Vol 2 (3) ◽  
pp. 64
Author(s):  
Guri Venvik ◽  
Floris C. Boogaard
Keyword(s):  
Green Infrastructure ◽  
Urban Areas ◽  
Toxic Elements ◽  
Urban Drainage ◽  
Runoff Water ◽  
Portable Xrf ◽  
Potential Toxic Elements ◽  
Drainage Systems ◽  
Urban Drainage Systems

Sustainable urban drainage systems (SuDS) such as swales are designed to collect, store and infiltrate a large amount of surface runoff water during heavy rainfall. Stormwater is known to transport pollutants, such as particle-bound Potential Toxic Elements (PTE), which are known to often accumulate in the topsoil. A portable XRF instrument (pXRF) is used to provide in situ spatial characterization of soil pollutants, specifically lead (Pb), zink (Zn) and copper (Cu). The method uses pXRF measurements of PTE along profiles with set intervals (1 m) to cover the swale with cross-sections, across the inlet, the deepest point and the outlet. Soil samples are collected, and the In-Situ measurements are verified by the results from laboratory analyses. Stormwater is here shown to be the transporting media for the pollutants, so it is of importance to investigate areas most prone to flooding and infiltration. This quick scan method is time and cost-efficient, easy to execute and the results are comparable to any known (inter)national threshold criteria for polluted soils. The results are of great importance for all stakeholders in cities that are involved in climate adaptation and implementing green infrastructure in urban areas. However, too little is still known about the long-term functioning of the soil-based SuDS facilities.

scholarly journals Hydrodynamic Characterization of Sustainable Urban Drainage Systems (SuDS) by Using Beerkan Infiltration Experiments

Water ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 660 ◽  
Author(s):  
Sofia Bouarafa ◽  
Laurent Lassabatere ◽  
Gislain Lipeme-Kouyi ◽  
Rafael Angulo-Jaramillo
Keyword(s):  
Urban Areas ◽  
Water Retention Curve ◽  
Urban Drainage ◽  
Hydrodynamic Behavior ◽  
Infiltration Capacity ◽  
Runoff Water ◽  
Drainage Systems ◽  
Urban Drainage Systems ◽  
The Impact

Stormwater management techniques in urban areas, such as sustainable urban drainage systems (SuDS), are designed to manage rainwater through an infiltration process. In order to determine the infiltration capacities of different SuDS and to identify their unsaturated hydraulic properties, measurements with the Beerkan method (i.e., single ring infiltration tests) were carried out on four types of common infiltration structures in an urban zone of Lyon (France): A drainage ditch with an underlying storage structure, a parking lot with a waterproof pavement that transfers runoff water toward the ditch, a vegetated hollow core slab, and an embankment of a grass-covered garden that was used as a reference for rainwater infiltration capacity. The novelty of this study lies in the use of three Beerkan estimation of soil transfer parameters (BEST) algorithms: BEST-slope, BEST-intercept, and BEST-steady to analyze infiltration data. The BEST methods are based on the analysis of the infiltration rate from transient to steady-state flow. They allow the determination of both shape and scale parameters of the soil water retention curve h(θ) and the hydraulic conductivity curve K(θ). The three BEST methods are efficient and simple for hydraulic characterization of SuDS. The study of the hydrodynamic behavior of the four structures revealed the infiltration inefficiency of some of them. Their average infiltration rates are considerably lower than the reference infiltration rain garden. The results confirmed the impact of some physical conditions, such as pore structure modification due to invasive vegetation colonization and the presence of soil organic matter, on soil hydrodynamic behavior degradation.

scholarly journals XRF Quick-Scan Mapping for Heavy Metal Pollutants in SuDS: A Methodological Approach

Sci ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 5
Author(s):  
Guri Venvik ◽  
Floris C. Boogaard
Keyword(s):  
Heavy Metals ◽  
Cross Sections ◽  
Green Infrastructure ◽  
Urban Areas ◽  
Climate Adaptation ◽  
Methodological Approach ◽  
Runoff Water ◽  
Portable Xrf ◽  
Cost Efficient

Sustainable urban drainage systems (SuDS) such as swales are designed to collect, store and infiltrate a large amount of surface runoff water during heavy rainfall. Stormwater is known to transport pollutants, such as particle-bound heavy metals, which are known to often accumulate in the topsoil. In this study, a portable XRF instrument is used to provide in situ spatial characterization of soil pollutants. The method uses portable XRF measurements of heavy metals along profiles with set intervals (1 meter) to cover the swale with cross-sections, across the inlet, the deepest point and the outlet. Soil samples are collected, and the In-Situ measurements are verified by the results from laboratory analyses. Stormwater is here shown to be the transporting media for the pollutants, so it is of importance to investigate areas most prone to flooding and infiltration. This quick scan method is time and cost-efficient, easy to execute and the results are comparable to any known (inter)national threshold criteria for polluted soils. The results are of great importance for all stakeholders in cities that are involved in climate adaptation and implementing green infrastructure in urban areas. However, too little is still known about the long-term functioning of the soil-based SuDS facilities.

scholarly journals Coupling Field Observations and Geographical Information System (GIS)-Based Analysis for Improved Sustainable Urban Drainage Systems (SUDS) Performance

2018 ◽  
Vol 10 (12) ◽  
pp. 4683 ◽  
Author(s):  
Tone Muthanna ◽  
Edvard Sivertsen ◽  
Dennis Kliewer ◽  
Lensa Jotta
Keyword(s):  
Information System ◽  
Geographical Information System ◽  
Green Infrastructure ◽  
Urban Soils ◽  
Physical Characteristics ◽  
Geographical Information ◽  
Successful Implementation ◽  
Urban Drainage ◽  
Drainage Systems ◽  
Urban Drainage Systems

Urbanization and increased precipitation volumes and intensities due to climate change add pressure to the urban drainage system, resulting in increased flooding frequencies of urban areas and deteriorating water quality in receiving waters. Infiltration practices and the use of blue green infrastructure, also called Sustainable Urban Drainage Systems (SUDS), can limit, and, in some cases, reverse the effects of urbanization. However, adequate infiltration capacity is an essential parameter for the successful implementation. In this paper, a Geographical Information System (GIS)-based hydrology analysis for SUDS placements is coupled with field measurements using Modified Phillip Dunne infiltrometer tests. The case study area is the expansion of the campus at the Norwegian University of Science and Technology (NTNU) over the next decade. Infiltration in urban soils can be highly heterogenous over short distances. When comparing measured infiltration rates with physical characteristics of the soils showed that the physical characteristics are not a good indication of the infiltration potential in urban soils with a large degree of compaction. The results showed that measuring the infiltration potential combined with flow path analysis can greatly enhance the benefits of blue green infrastructure, with an up to 70% difference in area required for SUDS solutions for managing 90% of the annual precipitation.

scholarly journals Sustainable Urban Drainage Systems in Spain: Analysis of the Research on SUDS Based on Climatology

2021 ◽  
Vol 13 (13) ◽  
pp. 7258
Author(s):  
Ana Isabel Abellán García ◽  
Noelia Cruz Pérez ◽  
Juan C. Santamarta
Keyword(s):  
Iberian Peninsula ◽  
Green Infrastructure ◽  
Rainwater Harvesting ◽  
Economic Feasibility ◽  
Limiting Factor ◽  
Urban Drainage ◽  
Climate Change Research ◽  
Drainage Systems ◽  
Mitigation And Adaptation ◽  
Urban Drainage Systems

Sustainable urban drainage systems (SUDS), or urban green infrastructure for stormwater control, emerged for more sustainable management of runoff in cities and provide other benefits such as urban mitigation and adaptation to climate change. Research in Spain began a little over twenty years ago, which was later than in other European countries, and it began in a heterogeneous way, both in the SUDS typology and spatially within the peninsular geography. The main objective of this work has been to know through bibliographic review the state of the art of scientific research of these systems and their relationship with the different types of climates in the country. These structures have a complex and sensitive dependence on the climate, which in the Iberian Peninsula is mostly type B and C (according to the Köppen classification). This means little water availability for the vegetation of some SUDS, which can affect the performance of the technique. To date, for this work, research has focused mainly on green roofs, their capabilities as a sustainable construction tool, and the performance of different plant species used in these systems in arid climates. The next technique with the most real cases analyzed is permeable pavements in temperate climates, proving to be effective in reducing flows and runoff volumes. Other specific investigations have focused on the economic feasibility of installing rainwater harvesting systems for the laundry and the hydraulic performance of retention systems located specifically in the northeast of the Iberian Peninsula. On the contrary, few scientific articles have appeared that describe other SUDS with vegetation such as bioretention systems or green ditches, which are characteristic of sustainable cities, on which the weather can be a very limiting factor for their development.

Sign in / Sign up

Export Citation Format

Share Document