scholarly journals Learning-Based Predictive Building Energy Model Using Weather Forecasts for Optimal Control of Domestic Energy Systems

2018 ◽  
Vol 11 (1) ◽  
pp. 147 ◽  
Author(s):  
Byung-Ki Jeon ◽  
Eui-Jong Kim ◽  
Younggy Shin ◽  
Kyoung-Ho Lee
Keyword(s):  
Predictive Control ◽  
Prediction Models ◽  
Weather Forecasting ◽  
Reference Model ◽  
Weather Prediction ◽  
Building Energy ◽  
Energy Model ◽  
Weather Data ◽  
Rc Building ◽  
Mean Square Errors

The aim of this study is to develop a model that can accurately calculate building loads and demand for predictive control. Thus, the building energy model needs to be combined with weather prediction models operated by a model predictive controller to forecast indoor temperatures for specified rates of supplied energy. In this study, a resistance–capacitance (RC) building model is proposed where the parameters of the models are determined by learning. Particle swarm optimization is used as a learning scheme to search for the optimal parameters. Weather prediction models are proposed that use a limited amount of forecasting information fed by local meteorological centers. Assuming that weather forecasting was perfect, hourly outdoor temperatures were accurately predicted; meanwhile, differences were observed in the predicted solar irradiances values. In investigations to verify the proposed method, a seven-resistance, five-capacitance (7R5C) model was tested against a reference model in EnergyPlus using the predicted weather data. The root-mean-square errors of the 7R5C model in the prediction of indoor temperatures on all the specified days were within 0.5 °C when learning was performed using reference data obtained from the previous five days and weather prediction was included. This level of deviation in predictive control is acceptable considering the magnitudes of the loads and demand of the tested building.

Building Peak Load Management With High Resolution Weather Data

2015 ◽  
Author(s):  
Yehisson Tibana ◽  
Estatio Gutierrez ◽  
M. Arend ◽  
J. E. Gonzalez
Keyword(s):  
High Resolution ◽  
Weather Forecasting ◽  
Peak Load ◽  
Building Energy ◽  
Energy Model ◽  
Department Of Energy ◽  
Urban Heat Islands ◽  
Weather Data ◽  
Load Management ◽  
Peak Loads

Dense urban environments are exposed to the combined effects of rising global temperatures and urban heat islands. This combination is resulting in increasing trends of energy consumption in cities, associated mostly with air conditioning to maintain indoor human comfort conditions. During periods of extreme summer weather, electrical usage usually reaches peak loads, stressing the electrical grid. The purpose of this study is to explore the use of available, high resolution weather data by effectively preparing a building for peak load management. The subject of study is a 14 floor, 620,782 sq ft building located in uptown Manhattan, New York City (40.819257 N, −73.949288 W). To precisely quantify thermal loads of the buildings for the summer conditions; a single building energy model (SBEM), the US Department of Energy EnergyPlus™ was used. The SBEM was driven by a weather file built from weather data of the urbanized weather forecasting model (uWRF), a high resolution weather model coupled to a building energy model. The SBEM configuration and simulations were calibrated with winter actual gas and electricity data using 2010 as the benchmark year. In order to show the building peak load management, demand response techniques and technologies were implemented. The methods used to prepare the building included generator usage during high peak loads and use of a thermal storage system. An ensemble of cases was analyzed using current practice, use of high resolution weather data, and use of building preparation technologies. Results indicated an average summer peak savings of more than 30% with high resolution weather data.

scholarly journals Fengyun Meteorological Satellite Products for Earth System Science Applications

2021 ◽  
Author(s):  
Di Xian ◽  
Peng Zhang ◽  
Ling Gao ◽  
Ruijing Sun ◽  
Haizhen Zhang ◽  
...  
Keyword(s):  
Data Sharing ◽  
Satellite Data ◽  
Prediction Models ◽  
Weather Forecasting ◽  
Numerical Models ◽  
Weather Prediction ◽  
Vegetation Indices ◽  
Open Data ◽  
Earth System ◽  
Inversion Algorithm

AbstractFollowing the progress of satellite data assimilation in the 1990s, the combination of meteorological satellites and numerical models has changed the way scientists understand the earth. With the evolution of numerical weather prediction models and earth system models, meteorological satellites will play a more important role in earth sciences in the future. As part of the space-based infrastructure, the Fengyun (FY) meteorological satellites have contributed to earth science sustainability studies through an open data policy and stable data quality since the first launch of the FY-1A satellite in 1988. The capability of earth system monitoring was greatly enhanced after the second-generation polar orbiting FY-3 satellites and geostationary orbiting FY-4 satellites were developed. Meanwhile, the quality of the products generated from the FY-3 and FY-4 satellites is comparable to the well-known MODIS products. FY satellite data has been utilized broadly in weather forecasting, climate and climate change investigations, environmental disaster monitoring, etc. This article reviews the instruments mounted on the FY satellites. Sensor-dependent level 1 products (radiance data) and inversion algorithm-dependent level 2 products (geophysical parameters) are introduced. As an example, some typical geophysical parameters, such as wildfires, lightning, vegetation indices, aerosol products, soil moisture, and precipitation estimation have been demonstrated and validated by in-situ observations and other well-known satellite products. To help users access the FY products, a set of data sharing systems has been developed and operated. The newly developed data sharing system based on cloud technology has been illustrated to improve the efficiency of data delivery.

Numerical Prediction of Submesoscale Flow in the Nocturnal Stable Boundary Layer over Complex Terrain

2012 ◽  
Vol 140 (3) ◽  
pp. 956-977 ◽  
Author(s):  
Nelson L. Seaman ◽  
Brian J. Gaudet ◽  
David R. Stauffer ◽  
Larry Mahrt ◽  
Scott J. Richardson ◽  
...  
Keyword(s):  
Prediction Models ◽  
Weather Prediction ◽  
Weather Research And Forecasting ◽  
Stable Boundary Layers ◽  
Stable Boundary ◽  
Central Pennsylvania ◽  
Stable Conditions ◽  
Improved Model ◽  
Mean Square Errors ◽  
Numerical Weather Prediction Models

Abstract Numerical weather prediction models often perform poorly for weakly forced, highly variable winds in nocturnal stable boundary layers (SBLs). When used as input to air-quality and dispersion models, these wind errors can lead to large errors in subsequent plume forecasts. Finer grid resolution and improved model numerics and physics can help reduce these errors. The Advanced Research Weather Research and Forecasting model (ARW-WRF) has higher-order numerics that may improve predictions of finescale winds (scales <~20 km) in nocturnal SBLs. However, better understanding of the physics controlling SBL flow is needed to take optimal advantage of advanced modeling capabilities. To facilitate ARW-WRF evaluations, a small network of instrumented towers was deployed in the ridge-and-valley topography of central Pennsylvania (PA). Time series of local observations and model forecasts on 1.333- and 0.444-km grids were filtered to isolate deterministic lower-frequency wind components. The time-filtered SBL winds have substantially reduced root-mean-square errors and biases, compared to raw data. Subkilometer horizontal and very fine vertical resolutions are found to be important for reducing model speed and direction errors. Nonturbulent fluctuations in unfiltered, very finescale winds, parts of which may be resolvable by ARW-WRF, are shown to generate horizontal meandering in stable weakly forced conditions. These submesoscale motions include gravity waves, primarily horizontal 2D motions, and other complex signatures. Vertical structure and low-level biases of SBL variables are shown to be sensitive to parameter settings defining minimum “background” mixing in very stable conditions in two representative turbulence schemes.

scholarly journals Model error in weather forecasting

2001 ◽  
Vol 8 (6) ◽  
pp. 357-371 ◽  
Author(s):  
D. Orrell ◽  
L. Smith ◽  
J. Barkmeijer ◽  
T. N. Palmer
Keyword(s):  
Prediction Models ◽  
Weather Forecasting ◽  
Initial Conditions ◽  
Forecast Error ◽  
Weather Prediction ◽  
Model Error ◽  
Local Model ◽  
State Dependent ◽  
Rapid Divergence ◽  
Dependent Model

Abstract. Operational forecasting is hampered both by the rapid divergence of nearby initial conditions and by error in the underlying model. Interest in chaos has fuelled much work on the first of these two issues; this paper focuses on the second. A new approach to quantifying state-dependent model error, the local model drift, is derived and deployed both in examples and in operational numerical weather prediction models. A simple law is derived to relate model error to likely shadowing performance (how long the model can stay close to the observations). Imperfect model experiments are used to contrast the performance of truncated models relative to a high resolution run, and the operational model relative to the analysis. In both cases the component of forecast error due to state-dependent model error tends to grow as the square-root of forecast time, and provides a major source of error out to three days. These initial results suggest that model error plays a major role and calls for further research in quantifying both the local model drift and expected shadowing times.

Assimilation of Satellite Cloud and Precipitation Observations in Numerical Weather Prediction Models: Introduction to the JAS Special Collection

2007 ◽  
Vol 64 (11) ◽  
pp. 3737-3741 ◽  
Author(s):  
Ronald M. Errico ◽  
George Ohring ◽  
Fuzhong Weng ◽  
Peter Bauer ◽  
Brad Ferrier ◽  
...  
Keyword(s):  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Forecasting ◽  
International Workshop ◽  
Weather Prediction ◽  
Satellite Observations ◽  
Atmospheric Sciences ◽  
Numerical Weather ◽  
Special Collection ◽  
Numerical Weather Prediction Models

Abstract To date, the assimilation of satellite measurements in numerical weather prediction (NWP) models has focused on the clear atmosphere. But satellite observations in the visible, infrared, and microwave provide a great deal of information on clouds and precipitation. This special collection describes how to use this information to initialize clouds and precipitation in models. Since clouds and precipitation often occur in sensitive regions for forecast impacts, such improvements are likely necessary for continuing to acquire significant gains in weather forecasting. This special collection of the Journal of the Atmospheric Sciences is devoted to articles based on papers presented at the International Workshop on Assimilation of Satellite Cloud and Precipitation Observations in Numerical Weather Prediction Models, in Lansdowne, Virginia, in May 2005. This introduction summarizes the findings of the workshop. The special collection includes review articles on satellite observations of clouds and precipitation (Stephens and Kummerow), parameterizations of clouds and precipitation in NWP models (Lopez), radiative transfer in cloudy/precipitating atmospheres (Weng), and assimilation of cloud and precipitation observations (Errico et al.), as well as research papers on these topics.

Short-term load forecasting coupled with weather profile generation methodology

2017 ◽  
Vol 39 (3) ◽  
pp. 310-327 ◽  
Author(s):  
Guangya Zhu ◽  
Tin-Tai Chow ◽  
Norman Tse
Keyword(s):  
Input Data ◽  
Weather Prediction ◽  
Load Forecasting ◽  
Building Energy ◽  
Weather Data ◽  
Generation Model ◽  
Short Term ◽  
Forecasting Accuracy ◽  
Building Load

Short-term building load forecasting is indispensable in daily operation of future intelligent/green buildings, particularly in formulating system control strategies and assessing the associated environmental impacts. Most previous research works have been focused on studying the advancement in forecasting techniques, but not as much on evaluating the availability of influential factors like the predicted weather profile in the coming hours. This article proposes an improved procedure to predict the building load 24 hours ahead, together with a backup weather profile generating method. The quality of the proposed weather profile generation model and the forecasting procedures were examined through a case study of application to university academic buildings. The results showed that the load forecasting accuracy with the application of either the real weather data on record or of the predicted weather data from the profile generation model is very much similar. This indicates that the weather prediction model is suitable for applying to building load forecasting. Besides, the comparisons between different sets of input data illustrated that the forecasting accuracy can be improved through the input data filtering and regrouping procedures. Practical application: A weather profile prediction technique for use in building energy forecasting was introduced. This can be coupled to a building energy use forecasting model for predicting the hourly consumption profile of the next day. This prediction time span can be crucial for formulating the daily operation plan of the utility systems or for smart micro-grid applications. The appropriateness of the methodology was evaluated through a case study.

scholarly journals Hybrid Machine Learning for Solar Radiation Prediction in Reduced Feature Spaces

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7970
Author(s):  
Abdel-Rahman Hedar ◽  
Majid Almaraashi ◽  
Alaa E. Abdel-Hakim ◽  
Mahmoud Abdulrahim
Keyword(s):  
Machine Learning ◽  
Solar Radiation ◽  
Root Mean Square ◽  
Prediction Models ◽  
Weather Prediction ◽  
Hybrid Models ◽  
Mean Square ◽  
Learning Models ◽  
Mean Square Errors ◽  
Machine Learning Models

Solar radiation prediction is an important process in ensuring optimal exploitation of solar energy power. Numerous models have been applied to this problem, such as numerical weather prediction models and artificial intelligence models. However, well-designed hybridization approaches that combine numerical models with artificial intelligence models to yield a more powerful model can provide a significant improvement in prediction accuracy. In this paper, novel hybrid machine learning approaches that exploit auxiliary numerical data are proposed. The proposed hybrid methods invoke different machine learning paradigms, including feature selection, classification, and regression. Additionally, numerical weather prediction (NWP) models are used in the proposed hybrid models. Feature selection is used for feature space dimension reduction to reduce the large number of recorded parameters that affect estimation and prediction processes. The rough set theory is applied for attribute reduction and the dependency degree is used as a fitness function. The effect of the attribute reduction process is investigated using thirty different classification and prediction models in addition to the proposed hybrid model. Then, different machine learning models are constructed based on classification and regression techniques to predict solar radiation. Moreover, other hybrid prediction models are formulated to use the output of the numerical model of Weather Research and Forecasting (WRF) as learning elements in order to improve the prediction accuracy. The proposed methodologies are evaluated using a data set that is collected from different regions in Saudi Arabia. The feature-reduction has achieved higher classification rates up to 8.5% for the best classifiers and up to 15% for other classifiers, for the different data collection regions. Additionally, in the regression, it achieved improvements of average root mean square error up to 5.6% and in mean absolute error values up to 8.3%. The hybrid models could reduce the root mean square errors by 70.2% and 4.3% than the numerical and machine learning models, respectively, when these models are applied to some dataset. For some reduced feature data, the hybrid models could reduce the root mean square errors by 47.3% and 14.4% than the numerical and machine learning models, respectively.

scholarly journals Kriging Interpolation in Modelling Tropospheric Wet Delay

Atmosphere ◽  
2020 ◽  
Vol 11 (10) ◽  
pp. 1125
Author(s):  
Hongyang Ma ◽  
Qile Zhao ◽  
Sandra Verhagen ◽  
Dimitrios Psychas ◽  
Han Dun
Keyword(s):  
Prediction Models ◽  
Weather Prediction ◽  
Satellite System ◽  
Kriging Interpolation ◽  
Seasonal Effect ◽  
Dense Network ◽  
Sparse Network ◽  
Average Value ◽  
Global Navigation Satellite ◽  
Mean Square Errors

This contribution implements the Kriging interpolation in predicting the tropospheric wet delays using global navigation satellite system networks. The predicted tropospheric delays can be used in strengthening the precise point positioning models and numerical weather prediction models. In order to evaluate the performances of the Kriging interpolation, a sparse network with 8 stations and a dense network with 19 stations from continuously operating reference stations (CORS) of the Netherlands are selected as the reference. In addition, other 15 CORS stations are selected as users, which are divided into three blocks: 5 stations located approximately in the center of the networks, 5 stations on the edge of the networks and 5 stations outside the networks. The zenith tropospheric wet delays are estimated at the network and user stations through the ionosphere-free positioning model; meanwhile, the predicted wet delays at the user stations are generated by the Kriging interpolation in the use of the tropospheric estimations at the network. The root mean square errors (RMSE) are calculated by comparing the predicted wet delays and estimated wet delays at the same user station. The results show that RMSEs of the stations inside the network are at a sub-centimeter level with an average value of 0.74 cm in the sparse network and 0.69 cm in the dense network. The stations on edge and outside the network can also achieve 1-cm level accuracy, which overcomes the limitation that accurate interpolations can only be attained inside the network. This contribution also presents an insignificant improvement of the prediction accuracy from the sparse network to the dense network over 1-year’s data processing and a seasonal effect on the tropospheric wet delay predictions.

Sign in / Sign up

Export Citation Format

Share Document