scholarly journals How Will Digitalization Change Road Freight Transport? Scenarios Tested in Sweden

2020 ◽  
Vol 13 (1) ◽  
pp. 304
Author(s):  
Anna Pernestål ◽  
Albin Engholm ◽  
Marie Bemler ◽  
Gyözö Gidofalvi

Road freight transport is a key function of modern societies. At the same time, road freight transport accounts for significant emissions. Digitalization, including automation, digitized information, and artificial intelligence, provide opportunities to improve efficiency, reduce costs, and increase service levels in road freight transport. Digitalization may also radically change the business ecosystem in the sector. In this paper, the question, “How will digitalization change the road freight transport landscape?” is addressed by developing four exploratory future scenarios, using Sweden as a case study. The results are based on input from 52 experts. For each of the four scenarios, the impacts on the road freight transport sector are investigated, and opportunities and barriers to achieving a sustainable transportation system in each of the scenarios are discussed. In all scenarios, an increase in vehicle kilometers traveled is predicted, and in three of the four scenarios, significant increases in recycling and urban freight flows are predicted. The scenario development process highlighted how there are important uncertainties in the development of the society that will be highly important for the development of the digitized freight transport landscape. One example is the sustainability paradigm, which was identified as a strategic uncertainty.

Author(s):  
Anna Pernestål ◽  
Albin Engholm ◽  
Marie Bemler ◽  
Gyözö Gidofalvi

Road freight transportation is a key function of modern societies. At the same time, road freight transportation accounts for significant emissions. To reach the UN sustainability goals, sustainable road freight transportation is key. Digitalization, including automation, digitized information, and AI provide opportunities to improve efficiency, reduce costs, and increase service levels in road freight transportation. Digitalization may also radically change the business ecosystem in the sector. In this paper, the question “How will digitalization change the road freight transportation landscape?” is addressed by developing four different future scenarios, using Sweden as a case study. For each of the four scenarios the impacts on the road freight transportation sector are investigated, and opportunities and barriers to reach a sustainable transportation system in each of the scenarios are discussed. In all scenarios an increase in vehicle kilometers travelled is predicted, and in three of the four scenarios significant increases of recycling and urban freight flows are predicted. The scenario development process highlighted how there are important uncertainties in the development of the society that will be highly important for the development of the digitized freight transportation landscape. One example is the sustainability paradigm, which was identified as a strategic uncertainty.


2018 ◽  
Vol 10 (9) ◽  
pp. 3025 ◽  
Author(s):  
Ján Ližbetin ◽  
Martina Hlatká ◽  
Ladislav Bartuška

The paper deals with the issue of greenhouse gas emissions that are produced by the road freight transport sector. These emissions affect the structure of the ozone layer and contribute to the greenhouse effect that causes global warming-issues that are closely associated with changing weather patterns and extreme weather events. Attention is drawn to the contradictions linked to FAME (Fatty Acid Methyl Esters) biofuels, namely the fact that although their use generates almost zero greenhouse gas emissions, their production requires high levels of energy consumption. The first part of the paper deals with the theoretical basis of the negative impacts of transport on the environment and the subsequent measurement of the extent of the harmful emissions generated by the road freight transport sector. In the methodical part of the paper, the calculation procedures and declared energy consumption and greenhouse gas emissions generated by transport services are analyzed according to the EN 16258 standard. The experimental part of the paper focuses on the application of the methodology to a specific shipment on a specified transport route, where the total energy consumption and production of greenhouse gas emissions is determined. These calculations are based on comprehensive studies carried out for a particular transport company that assigned the authors the task of determining to what extent the declared energy consumption and greenhouse gas emissions change when the type of fuel used is changed.


Author(s):  
Ryszard Dindorf ◽  
Jakub Takosoglu ◽  
Piotr Wos

This article deals with the issue of safety within the road freight transport sector with regards to the securing of cargo on a vehicle. The first part of the article focuses on the legal framework that regulates this issue in the Czech Republic. The second part is based on a case study and survey conducted among drivers of the road freight transport vehicles into their awareness of what they understand is meant by securing and secure cargo. The case study was carried out in a specific transport company and includes an analysis of the current situation and concrete measures for improving safety while securing timber for transport.


2021 ◽  
Vol 7 (1) ◽  
pp. 285-292
Author(s):  
Viktoriia Harkava ◽  
Olena Pylypenko ◽  
Oleksandr Haisha ◽  
Armen Aramyan ◽  
Volodymyr Kairov

The purpose of the research is as follows: analysis of the current state of functioning of the road transport sector in Eastern Europe and identification of key problems and trends in its development. Research methods: Methods of grouping, comparison and generalization, сorrelation analysis have been used to identify the dynamics of the main indicators of road transport in Eastern Europe. The method of correlation-regression analysis has been applied to determine the impact of increasing the length of roads on the turnover of the road freight transport and the number of employed population in this area. Results. It has been found that the increase in the employed population by 96% and increase in revenues from transportation and storage of goods, postal and courier services (turnover of the road freight transport - in the original language) in the field of road transport by 82% is explained by the change in transport infrastructure capacity by increasing length of highways.    


Author(s):  
Asvin Goel ◽  
Thibaut Vidal ◽  
Adrianus Leendert Kok

AbstractThe last decades have seen a tremendous amount of research being devoted to effectively managing vehicle fleets and minimizing empty mileage. However, in contrast to, e.g., the air transport sector, the question of how to best assign crews to vehicles, has received very little attention in the road transport sector. The vast majority of road freight transport in Europe is conducted by single drivers and team driving is often only conducted if there are special circumstances, e.g., security concerns. While it is clear that transport companies want to avoid the costs related to additional drivers, vehicles manned by a single driver sit unused whenever the driver takes a mandatory break or rest. Team drivers, on the other hand, can travel a much greater distance in the same amount of time, because mandatory breaks and rests are required less frequently. This paper investigates under which conditions trucking companies should use single or team driving to maximize their profitability. We present a novel optimization approach for simultaneously optimizing routes and crewing decisions and provide experimental evidence that, for a wide range of cost factors, operating a fleet with a mix of team and single drivers can significantly reduce operational costs when compared to typical profit margins in the sector.


2019 ◽  
Vol 20 (1-2) ◽  
pp. 508-512
Author(s):  
Małgorzata Walendzik ◽  
Tomasz Kamiński

The article discusses issues related to the implemented system of monitoring the road transport of sensitive goods. The Act of March 9, 2017, on the road freight transport monitoring system, came into force on April 18, 2017 and introduced procedures to fight dishonest entities involved in illicit trade in goods without paying taxes to the state budget. The Act specifies the rules of the goods tracking system covered by this legal act, as well as liability for the breach of duties, at every stage of the supply chain of road freight transport, i.e. at the level of the sending and receiving entity, the carrier and the driver of the means of transport. The goods covered by the obligatory declaration, both in the wording of the Act and in the justification to the draft act, are referred to as "sensitive goods". The registration tool used for monitoring the transport of the indicated goods is a register of notifications, which is kept in the ICT system by the head of the National Tax Administration. The transport of sensitive goods is subject to the obligation to report to this register.


Author(s):  
Ján Ližbetin ◽  
Mária Stopková

This article deals with the issue of safety within the road freight transport sector with regards to the securing of cargo on a vehicle. The first part of the article focuses on the legal framework that regulates this issue in the Czech Republic. The second part is based on a case study and survey conducted among drivers of the road freight transport vehicles into their awareness of what they understand is meant by securing and secure cargo. The case study was carried out in a specific transport company and includes an analysis of the current situation and concrete measures for improving safety while securing timber for transport.


2018 ◽  
Vol 197 ◽  
pp. 13017 ◽  
Author(s):  
Vera Surtia Bachtiar ◽  
Purnawan ◽  
Reri Afrianita ◽  
Randa Anugerah

This study aims to validate CO dispersion model due to the position of the road toward the dominant wind direction on the transport sector. Sampling for modelling was done on the road with the road angle to wind direction is 0 degree (Jend. A. Yani Road), 30 degree (Andalas Road) and 60 degree (Prof. Dr. Hamka Road). CO dispersion model was obtained from the relations between CO concentration with traffic volume, traffic speed, wind speed and dominant wind direction. Sampling for validation was done at three location points, i.e. Jend. Ahmad Yani Road, By Pass Road and Dr. Wahidin Road, each of which has a position of 0, 45 and 90 degrees toward dominant wind direction. Sampling for CO was done using impinger. Measurement of traffic characteristics and meteorological conditions was performed in conjunction with CO sampling. Validation test was done by using Pearson Product Moment formula and Test of Two Variance. Results of the Two-Variance Test showed no significant difference between two concentrations of CO model and CO measurement. It showed the Test Ratio (RUf) smaller than the Critical Point. Validation test using Pearson Product Moment showed that the CO model can be used for predicting CO dispersion.


Sign in / Sign up

Export Citation Format

Share Document