scholarly journals Electrospun VDF-TeFE Scaffolds Modified by Copper and Titanium in Magnetron Plasma and Their Antibacterial Activity against MRSA

Technologies ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 5
Author(s):  
Arsalan D. Badaraev ◽  
Marat I. Lerner ◽  
Dmitrii V. Sidelev ◽  
Evgeny N. Bolbasov ◽  
Sergei I. Tverdokhlebov
Keyword(s):  
Electron Microscopy ◽  
Tissue Engineering ◽  
Scanning Electron Microscopy ◽  
Antibacterial Activity ◽  
Vinylidene Fluoride ◽  
Fiber Diameter ◽  
Antibacterial Properties ◽  
Argon Atmosphere ◽  
Copolymer Solution ◽  
Scanning Electron

Copolymer solution of vinylidene fluoride with tetrafluoroethylene (VDF-TeFE) was used for electrospinning of fluoropolymer scaffolds. Magnetron co-sputtering of titanium and copper targets in the argon atmosphere was used for VDF-TeFE scaffolds modification. Scanning electron microscopy (SEM) showed that scaffolds have a nonwoven structure with mean fiber diameter 0.77 ± 0.40 μm, mean porosity 58 ± 7%. The wetting angle of the original (unmodified) hydrophobic fluoropolymer scaffold after modification by titanium begins to possess hydrophilic properties. VDF-TeFE scaffold modification by titanium/copper leads to the appearance of strong antibacterial properties. The obtained fluoropolymer samples can be successfully used in tissue engineering.

scholarly journals Antibacterial activity of zinc oxide nanoparticles obtained by pulsed laser ablation in water and air

2018 ◽  
Vol 243 ◽  
pp. 00017 ◽  
Author(s):  
Daria Goncharova ◽  
Ekaterina Gavrilenko ◽  
Anna Nemoykina ◽  
Valery Svetlichnyi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Antibacterial Activity ◽  
Laser Ablation ◽  
Zno Nanoparticles ◽  
Antibacterial Properties ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Composition And Structure ◽  
Scanning Electron

The paper studies physicochemical and antibacterial properties of ZnO nanoparticles obtained by pulsed laser ablation in water and air. Their composition and structure were studied by X-ray diffraction, transmission and scanning electron microscopy. Antibacterial activity of the nanoparticles was examined by its affection on Gram-positive Staphylococcus aureus (S.aureus). The dependence of nanoparticles’ physical and chemical antibacterial properties on the conditions of the ablation was shown. The model materials for the antibacterial bandage were made of cotton, filter paper and biodegradable polymer scaffolds (poly-l-lactide acid), and then they were coated with the obtained ZnO nanoparticles. The model bandage materials were examined by the scanning electron microscopy method and their antibacterial activity (ISO 20743:2013) was determined. High activity of all the samples against S.aureus was proved.

Preparation and study on the optical, mechanical, and antibacterial properties of polylactic acid/ZnO/TiO2 shared nanocomposites

2020 ◽  
Vol 36 (3) ◽  
pp. 285-311
Author(s):  
Ali Tajdari ◽  
Amir Babaei ◽  
Alireza Goudarzi ◽  
Razie Partovi
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Antibacterial Activity ◽  
Optical Properties ◽  
Polylactic Acid ◽  
Field Emission ◽  
Antibacterial Properties ◽  
Hydrolytic Degradation ◽  
Scanning Electron

In this research, first, ZnO nanorods were synthesized by hydrothermal method and characterized in terms of morphological and structural properties by means of field emission scanning electron microscopy, Fourier transform infrared, and X-ray diffraction techniques. Subsequently, polylactic acid/ZnO, polylactic acid/TiO2, and polylactic acid/ZnO/TiO2 nanocomposites with different percentages of nanoparticles and two different types of ZnO morphologies were prepared and their microstructural, optical, mechanical, hydrolytic degradation, and antibacterial properties were investigated. Field emission scanning electron microscopy results of polylactic acid/ZnO and polylactic acid/TiO2 samples showed a proper dispersion and nanoparticle distribution for low percentages (up to 5 wt%) and increased aggregation for the higher percentages. Besides, a large increase in the aggregation tendency was observed for combined nanoparticles (polylactic acid/ZnO/TiO2 nanocomposites). Results of the tensile test, the UV–Vis absorption tests, and the hydrolytic degradation tests of the samples showed an enhanced mechanical (approximately 55% increase in the presence of 3–5 wt% of nanoparticles) and light absorption and degradation (approximately 85% increase in the presence of 3–10 wt% of nanoparticles) for the polylactic acid by incorporating nanoparticles. It was also observed that, in addition to the quality of dispersion and distribution of nanoparticles in the polymeric matrix, the type of morphology of nanoparticles can contribute to the improvement of these properties. The cylindrical morphology of ZnO played a greater role on improving the polylactic acid mechanical properties compared to the spherical ZnO morphology (approximately 20%). On the contrary, the increased polylactic acid optical properties and degradation with ZnO spherical morphology were more pronounced (approximately 60%). Interestingly, when both ZnO and TiO2 were added, a synergistic effect in the case of UV-shielding and degradation rate and alternatively, a detrimental effect on the mechanical properties were detected. (The polylactic acid optical properties increased by about 17% and its degradation more than doubled.) Furthermore, the antibacterial activity of polylactic acid was investigated against the two Gram-positive Listeria monocytogenes and Gram-negative bacteria Escherichia coli by incorporating nanoparticles. The results indicated that as the nanoparticle percentage increases, the antibacterial activity steadily increases.

scholarly journals A Review on Enhancing the Antibacterial Activity of ZnO: Mechanisms and Microscopic Investigation

2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Buzuayehu Abebe ◽  
Enyew Amare Zereffa ◽  
Aschalew Tadesse ◽  
H. C. Ananda Murthy
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Antibacterial Activity ◽  
Field Emission ◽  
Volume Ratio ◽  
Electronic Configuration ◽  
Microscopic Investigation ◽  
Electron Microscopic ◽  
Active Materials ◽  
Scanning Electron

Abstract Metal oxide nanomaterials are one of the preferences as antibacterial active materials. Due to its distinctive electronic configuration and suitable properties, ZnO is one of the novel antibacterial active materials. Nowadays, researchers are making a serious effort to improve the antibacterial activities of ZnO by forming a composite with the same/different bandgap semiconductor materials and doping of ions. Applying capping agents such as polymers and plant extract that control the morphology and size of the nanomaterials and optimizing different conditions also enhance the antibacterial activity. Forming a nanocomposite and doping reduces the electron/hole recombination, increases the surface area to volume ratio, and also improves the stability towards dissolution and corrosion. The release of antimicrobial ions, electrostatic interaction, reactive oxygen species (ROS) generations are the crucial antibacterial activity mechanism. This review also presents a detailed discussion of the antibacterial activity improvement of ZnO by forming a composite, doping, and optimizing different conditions. The morphological analysis using scanning electron microscopy, field emission-scanning electron microscopy, field-emission transmission electron microscopy, fluorescence microscopy, and confocal microscopy can confirm the antibacterial activity and also supports for developing a satisfactory mechanism. Graphical abstract Graphical abstract showing the metal oxides antibacterial mechanism and the fluorescence and scanning electron microscopic images.

Biocidal activity of curcumin and cationic polymer possessing composites

2020 ◽  
Vol 35 (4-5) ◽  
pp. 389-398
Author(s):  
Tarık Eren ◽  
Gülay Baysal ◽  
Faik Doğan
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Curcuma Longa ◽  
Antibacterial Properties ◽  
Fourier Transform Infrared ◽  
Diffusion Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

There is a growing interest in new type of biocidal compounds with antibacterial properties against bacteria. In this study, new antibacterial synthetic materials bearing curcumin and cationic polymers were synthesized. In the synthesis stage, the methacrylate functional cationic monomer was synthesized via the Michael addition route by using 3-acryloxy-2-hydroxypropyl methacrylate and 3-amino pyridine to obtain Monomer 1. Monomer 1 was further quaternized with hexyl bromide to obtain a cationic methacrylate functional monomer. Free-radical polymerization of Monomer 1 and methyl acrylate was conducted in the presence of azobisisobutyronitrile under dimethylformamide solvent. The composite formulation was conducted by using turmeric extract Curcuma longa (curcumin), hydroxyapatite, montmorillonite, and silver nitrate. The materials were analyzed by using the methods of X-ray diffraction, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and scanning electron microscopy. The biocidal activities against the bacteria Escherichia coli, Listeria monocytogenes, Salmonella, and Staphylococcus aureus were analyzed using agar well diffusion method. From the Fourier transform infrared, X-ray diffraction, and scanning electron microscopy analysis results of the synthesized nanocomposites, it is seen that they form strong connections with the components added to the composites and form an exfoliated structure. According to the antibacterial analysis results, the nanocomposites obtained have showed a strong antibacterial resistance against E.coli, L.monocytogenes, Salmonella, and S. aureus bacteria, and the high inhibition zone areas were obtained.

Preparation and Characterization of Polyacrylonitrile-Based Nanofibers by Electrostatic Spinning

2012 ◽  
Vol 591-593 ◽  
pp. 1042-1045 ◽  
Author(s):  
Si Yu Li ◽  
Yan Wei Wang ◽  
Tan Wen Jun
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Mass Concentration ◽  
Fiber Diameter ◽  
Solution Concentration ◽  
Electrostatic Spinning ◽  
Pan Fiber ◽  
Synthetic Reaction ◽  
Scanning Electron

PAN and P(AN-co-MA) nanofibers have been successfully prepared by electrospinning. The mass concentration is 6%-12%, voltage of 15-25 kV, tip-to-collector distance is 25 cm. The morphology of the obtained samples was measured by a Scanning electron microscopy (SEM). The results showed that there were some large beads distributed on the PAN fiber skeleton when the spinning solution concentration is low. With the spinning solution concentration increased, the bead structure is gradually reduced. The fiber diameter increased with the concentration. For the synthetic reaction mixture P(AN-co-MA), it could obtain uniform nanofibers easily

Glass Wool Prepared under Various Rotating Speed by Centrifugal-Spinneret-Blow Process

2012 ◽  
Vol 457-458 ◽  
pp. 1573-1576 ◽  
Author(s):  
Bin Bin Li ◽  
Zhao Feng Chen ◽  
Zhou Chen ◽  
Jin Lian Qiu ◽  
Yan Qing Zhou ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fiber Diameter ◽  
Optical Microscope ◽  
Glass Wool ◽  
Pronounced Effect ◽  
Rotating Speed ◽  
The Mean ◽  
Scanning Electron

In this paper, glass wool has been prepared under various rotating speed of centrifugal pan by centrifugal-spinneret-blow process. The fiber diameter of glass wool has been studied by scanning electron microscopy (SEM) and vertical optical microscope (VOM). With the increase of rotating speed from 1800 rpm to 2400 rpm, the mean fiber diameter decreased from 5.9 µm to 3.9 µm, indicating the distribution of glass wool becomes more uniformity. The results show that the rotating speed has a direct and pronounced effect on the fiber diameter and distribution. The higher the rotating speed is, the smaller the mean fiber diameter is, and the more uniformity the distribution of fiber diameter is.

Sign in / Sign up

Export Citation Format

Share Document