scholarly journals Comparison between Novice and Experienced Surgeons Performing Corrective Osteotomy with Patient-Specific Guides in Dogs Based on Resulting Position Accuracy

2021 ◽  
Vol 8 (3) ◽  
pp. 40
Author(s):  
Yoon Ho Rho ◽  
Cheong Woon Cho ◽  
Chang Hun Ryu ◽  
Je Hun Lee ◽  
Seong Mok Jeong ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Corrective Osteotomy ◽  
Three Dimensional ◽  
Patient Specific ◽  
Bone Modeling ◽  
Accuracy Evaluation ◽  
3D Registration ◽  
Rotational Angle ◽  
Significant Difference ◽  
Angular Deformities

Corrective osteotomy has been applied to realign and stabilize the bones of dogs with lameness. However, corrective osteotomy for angular deformities requires substantial surgical experience for planning and performing accurate osteotomy. Three-dimensional printed patient-specific guides (3D-PSGs) were developed to overcome perioperative difficulties. In addition, novices can easily use these guides for performing accurate corrective osteotomy. We compared the postoperative results of corrective osteotomy accuracy when using 3D-PSGs in dogs between novice and experienced surgeons. We included eight dogs who underwent corrective osteotomy: three angular deformities of the radius and ulna, three distal femoral osteotomies, one center of rotational angle-based leveling osteotomy, and one corrective osteotomy with stifle arthrodesis. All processes, including 3D bone modeling, production of PSGs, and rehearsal surgery were carried out with computer-aided design software and a 3D-printed bone model. Pre- and postoperative positions following 3D reconstruction were evaluated by radiographs using the 2D/3D registration technique. All patients showed clinical improvement with satisfactory alignment and position. Postoperative accuracy evaluation revealed no significant difference between novice and experienced surgeons. PSGs are thought to be useful for novice surgeons to accurately perform corrective osteotomy in dogs without complications.

scholarly journals In vivo three-dimensional kinematics of normal knees during different high-flexion activities

2018 ◽  
Vol 100-B (1) ◽  
pp. 50-55 ◽  
Author(s):  
K. Kono ◽  
T. Tomita ◽  
K. Futai ◽  
T. Yamazaki ◽  
S. Tanaka ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
External Rotation ◽  
Three Dimensional ◽  
Lateral Side ◽  
3D Registration ◽  
High Flexion ◽  
Valgus Angle ◽  
Significant Difference ◽  
Medial Pivot

Aims In Asia and the Middle-East, people often flex their knees deeply in order to perform activities of daily living. The purpose of this study was to investigate the 3D kinematics of normal knees during high-flexion activities. Our hypothesis was that the femorotibial rotation, varus-valgus angle, translations, and kinematic pathway of normal knees during high-flexion activities, varied according to activity. Materials and Methods We investigated the in vivo kinematics of eight normal knees in four male volunteers (mean age 41.8 years; 37 to 53) using 2D and 3D registration technique, and modelled the knees with a computer aided design program. Each subject squatted, kneeled, and sat cross-legged. We evaluated the femoral rotation and varus-valgus angle relative to the tibia and anteroposterior translation of the medial and lateral side, using the transepicodylar axis as our femoral reference relative to the perpendicular projection on to the tibial plateau. This method evaluates the femur medially from what has elsewhere been described as the extension facet centre, and differs from the method classically applied. Results During squatting and kneeling, the knees displayed femoral external rotation. When sitting cross-legged, femurs displayed internal rotation from 10° to 100°. From 100°, femoral external rotation was observed. No significant difference in varus-valgus angle was seen between squatting and kneeling, whereas a varus position was observed from 140° when sitting cross-legged. The measure kinematic pathway using our methodology found during squatting a medial pivoting pattern from 0° to 40° and bicondylar rollback from 40° to 150°. During kneeling, a medial pivot pattern was evident. When sitting cross-legged, a lateral pivot pattern was seen from 0° to 100°, and a medial pivot pattern beyond 100°. Conclusion The kinematics of normal knees during high flexion are variable according to activity. Nevertheless, our study was limited to a small number of male patients using a different technique to report the kinematics than previous publications. Accordingly, caution should be observed in generalizing our findings. Cite this article: Bone Joint J 2018;100-B:50–5.

scholarly journals An MRI-Based Patient-Specific Computational Framework for the Calculation of Range of Motion of Total Hip Replacements

2021 ◽  
Vol 11 (6) ◽  
pp. 2852
Author(s):  
Maeruan Kebbach ◽  
Christian Schulze ◽  
Christian Meyenburg ◽  
Daniel Kluess ◽  
Mevluet Sungu ◽  
...  
Keyword(s):  
Range Of Motion ◽  
Internal Rotation ◽  
Computer Aided Design ◽  
External Rotation ◽  
Patient Specific ◽  
Computational Framework ◽  
Total Hip ◽  
Total Hip Replacements ◽  
Significant Difference ◽  
Hip Replacements

The calculation of range of motion (ROM) is a key factor during preoperative planning of total hip replacements (THR), to reduce the risk of impingement and dislocation of the artificial hip joint. To support the preoperative assessment of THR, a magnetic resonance imaging (MRI)-based computational framework was generated; this enabled the estimation of patient-specific ROM and type of impingement (bone-to-bone, implant-to-bone, and implant-to-implant) postoperatively, using a three-dimensional computer-aided design (CAD) to visualize typical clinical joint movements. Hence, patient-specific CAD models from 19 patients were generated from MRI scans and a conventional total hip system (Bicontact® hip stem and Plasmacup® SC acetabular cup with a ceramic-on-ceramic bearing) was implanted virtually. As a verification of the framework, the ROM was compared between preoperatively planned and the postoperatively reconstructed situations; this was derived based on postoperative radiographs (n = 6 patients) during different clinically relevant movements. The data analysis revealed there was no significant difference between preoperatively planned and postoperatively reconstructed ROM (∆ROM) of maximum flexion (∆ROM = 0°, p = 0.854) and internal rotation (∆ROM = 1.8°, p = 0.917). Contrarily, minor differences were observed for the ROM during maximum external rotation (∆ROM = 9°, p = 0.046). Impingement, of all three types, was in good agreement with the preoperatively planned and postoperatively reconstructed scenarios during all movements. The calculated ROM reached physiological levels during flexion and internal rotation movement; however, it exceeded physiological levels during external rotation. Patients, where implant-to-implant impingement was detected, reached higher ROMs than patients with bone-to-bone impingement. The proposed framework provides the capability to predict postoperative ROM of THRs.

Investigation of three-dimensional printing materials for printing aorta model replicating Type B aortic dissection

2021 ◽  
Vol 17 ◽  
Author(s):  
Chia-An Wu ◽  
Andrew Squelch ◽  
Zhonghua Sun
Keyword(s):  
3D Printing ◽  
Aortic Dissection ◽  
Three Dimensional ◽  
Ct Images ◽  
Patient Specific ◽  
Type B ◽  
Type B Aortic Dissection ◽  
Ct Attenuation ◽  
Significant Difference ◽  
3D Printed

Aim: To determine a printing material that has both elastic property and radiology equivalence close to real aorta for simulation of endovascular stent graft repair of aortic dissection. Background: With the rapid development of three-dimensional (3D) printing technology, a patient-specific 3D printed model is able to help surgeons to make better treatment plan for Type B aortic dissection patients. However, the radiological properties of most 3D printing materials have not been well characterized. This study aims to investigate the appropriate materials for printing human aorta with mechanical and radiological properties similar to the real aortic computed tomography (CT) attenuation. Objective: Quantitative assessment of CT attenuation of different materials used in 3D printed models of aortic dissection for developing patient-specific 3D printed aorta models to simulate type B aortic dissection. Method: A 25-mm length of aorta model was segmented from a patient’s image dataset with diagnosis of type B aortic dissection. Four different elastic commercial 3D printing materials, namely Agilus A40 and A50, Visijet CE-NT A30 and A70 were selected and printed with different hardness. Totally four models were printed out and conducted CT scanned twice on a 192-slice CT scanner using the standard aortic CT angiography protocol, with and without contrast inside the lumen.Five reference points with region of interest (ROI) of 1.77 mm2 were selected at the aortic wall and intimal flap and their Hounsfield units (HU) were measured and compared with the CT attenuation of original CT images. The comparison between the patient’s aorta and models was performed through a paired-sample t-test to determine if there is any significant difference. Result: The mean CT attenuation of aortic wall of the original CT images was 80.7 HU. Analysis of images without using contrast medium showed that the material of Agilus A50 produced the mean CT attenuation of 82.6 HU, which is similar to that of original CT images. The CT attenuation measured at images acquired with other three materials was significantly lower than that of original images (p<0.05). After adding contrast medium, Visijet CE-NT A30 had an average CT attenuation of 90.6 HU, which is close to that of the original images with statistically significant difference (p>0.05). In contrast, the CT attenuation measured at images acquired with other three materials (Agilus A40, A50 and Visiject CE-NT A70) was 129 HU, 135 HU and 129.6 HU, respectively, which is significantly higher than that of original CT images (p<0.05). Conclusion: Both Visijet CE-NT and Agilus have tensile strength and elongation close to real patient’s tissue properties producing similar CT attenuation. Visijet CE-NT A30 is considered the appropriate material for printing aorta to simulate contrast-enhanced CT imaging of type B aortic dissection. Due to lack of body phantom in the experiments, further research with simulation of realistic anatomical body environment should be conducted.

scholarly journals Comparative Study of the Trueness of the Inner Surface of Crowns Fabricated from Three Types of Lithium Disilicate Blocks

2019 ◽  
Vol 9 (9) ◽  
pp. 1798 ◽  
Author(s):  
Son ◽  
Yu ◽  
Yoon ◽  
Lee
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Lithium Disilicate ◽  
Correction Method ◽  
3D Analysis ◽  
Angular Region ◽  
Second Molar ◽  
Significant Difference ◽  
Inner Surface ◽  
Aided Design

This study set out to compare the three-dimensional (3D) trueness of crowns produced from three types of lithium disilicate blocks. The working model was digitized, and single crowns (maxillary left second molar) were designed using computer-aided design (CAD) software. To produce a crown design model (CDM), a crown design file was extracted from the CAD software. In addition, using the CDM file and a milling machine (N = 20), three types of lithium disilicate blocks (e.max CAD, HASS Rosetta, and VITA Suprinity) were processed. To produce a crown scan model (CSM), the inner surface of each fabricated crown was digitized using a touch-probe scanner. In addition, using 3D inspection software, the CDM was partitioned (into marginal, axis, angular, and occlusal regions), the CDM and CSM were overlapped, and a 3D analysis was conducted. A Kruskal–Wallis test (α = 0.05) was conducted with all-segmented teeth with the root mean square (RMS), and they were analyzed using the Mann–Whitney U-test and the Bonferroni correction method as a post hoc test. There was a significant difference in the trueness of the crowns according to the type of lithium disilicate block (p < 0.001). The overall RMS value was at a maximum for e.max (42.9 ± 4.4 µm), followed by HASS (30.1 ± 9.0 µm) and then VITA (27.3 ± 7.9 µm). However, there was no significant difference between HASS and VITA (p = 0.541). There were significant differences in all regions inside the crown (p < 0.001). There was a significantly high trueness in the angular region inside the crown (p < 0.001). A correction could thus be applied in the CAD process, considering the differences in the trueness by the type of lithium disilicate block. In addition, to attain a crown with an excellent fit, it is necessary to provide a larger setting space for the angular region during the CAD process.

scholarly journals Accuracy Assessment of Molded, Patient-Specific Polymethylmethacrylate Craniofacial Implants Compared to Their 3D Printed Originals

2020 ◽  
Vol 9 (3) ◽  
pp. 832 ◽  
Author(s):  
Dave Chamo ◽  
Bilal Msallem ◽  
Neha Sharma ◽  
Soheila Aghlmandi ◽  
Christoph Kunz ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Accuracy Assessment ◽  
Three Dimensional ◽  
Production Costs ◽  
Patient Specific ◽  
Patient Specific Implants ◽  
3D Printed ◽  
Cost Efficient ◽  
Craniofacial Implants ◽  
Aided Design

The use of patient-specific implants (PSIs) in craniofacial surgery is often limited due to a lack of expertise and/or production costs. Therefore, a simple and cost-efficient template-based fabrication workflow has been developed to overcome these disadvantages. The aim of this study is to assess the accuracy of PSIs made from their original templates. For a representative cranial defect (CRD) and a temporo-orbital defect (TOD), ten PSIs were made from polymethylmethacrylate (PMMA) using computer-aided design (CAD) and three-dimensional (3D) printing technology. These customized implants were measured and compared with their original 3D printed templates. The implants for the CRD revealed a root mean square (RMS) value ranging from 1.128 to 0.469 mm with a median RMS (Q1 to Q3) of 0.574 (0.528 to 0.701) mm. Those for the TOD revealed an RMS value ranging from 1.079 to 0.630 mm with a median RMS (Q1 to Q3) of 0.843 (0.635 to 0.943) mm. This study demonstrates that a highly precise duplication of PSIs can be achieved using this template-molding workflow. Thus, virtually planned implants can be accurately transferred into haptic PSIs. This workflow appears to offer a sophisticated solution for craniofacial reconstruction and continues to prove itself in daily clinical practice.

scholarly journals Main Clinical Use of Additive Manufacturing (Three-Dimensional Printing) in Finland Restricted to the Head and Neck Area in 2016–2017

2019 ◽  
Vol 109 (2) ◽  
pp. 166-173 ◽  
Author(s):  
A.B.V. Pettersson ◽  
M. Salmi ◽  
P. Vallittu ◽  
W. Serlo ◽  
J. Tuomi ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Patient Specific ◽  
Future Research ◽  
Imaging Data ◽  
University Hospitals ◽  
Three Dimensional Printing ◽  
Dimensional Printing ◽  
Head Area

Background and Aims: Additive manufacturing or three-dimensional printing is a novel production methodology for producing patient-specific models, medical aids, tools, and implants. However, the clinical impact of this technology is unknown. In this study, we sought to characterize the clinical adoption of medical additive manufacturing in Finland in 2016–2017. We focused on non-dental usage at university hospitals. Materials and Methods: A questionnaire containing five questions was sent by email to all operative, radiologic, and oncologic departments of all university hospitals in Finland. Respondents who reported extensive use of medical additive manufacturing were contacted with additional, personalized questions. Results: Of the 115 questionnaires sent, 58 received answers. Of the responders, 41% identified as non-users, including all general/gastrointestinal (GI) and vascular surgeons, urologists, and gynecologists; 23% identified as experimenters or previous users; and 36% identified as heavy users. Usage was concentrated around the head area by various specialties (neurosurgical, craniomaxillofacial, ear, nose and throat diseases (ENT), plastic surgery). Applications included repair of cranial vault defects and malformations, surgical oncology, trauma, and cleft palate reconstruction. Some routine usage was also reported in orthopedics. In addition to these patient-specific uses, we identified several off-the-shelf medical components that were produced by additive manufacturing, while some important patient-specific components were produced by traditional methodologies such as milling. Conclusion: During 2016–2017, medical additive manufacturing in Finland was routinely used at university hospitals for several applications in the head area. Outside of this area, usage was much less common. Future research should include all patient-specific products created by a computer-aided design/manufacture workflow from imaging data, instead of concentrating on the production methodology.

scholarly journals Three-dimensional alteration of constricted alveolar ridge affected by root thrusting with and without open-flap decortication

2017 ◽  
Vol 87 (5) ◽  
pp. 725-732
Author(s):  
Donghyun Hwang ◽  
Won-June Lee ◽  
Kyung-A Kim ◽  
Seung-Hak Baek ◽  
Young-Guk Park ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Bone Modeling ◽  
Alveolar Ridge ◽  
Histomorphometric Analysis ◽  
Mineral Density ◽  
Significant Difference ◽  
Fractional Analysis ◽  
Bone Fraction ◽  
Trabecular Number

ABSTRACT Objective: To investigate the morphometric and histological alterations of the constricted alveolar ridge when affected by root thrusting with and without open-flap decortication. Materials and Methods: Eight beagles were divided into three groups: C, control without root thrusting; R, root thrusting only; RD, root thrusting with alveolar decortication. The ridge constriction model was prepared in 16 mandibular quadrants after extraction of the third premolars. Reciprocal root thrusting of the second and fourth premolars was performed toward the constricted ridge for 10 weeks, having a moment of 900 g-mm. Open-flap decortication was conducted on the constricted bone surface in group RD. Micro-CT-based histomorphometric analysis and trichrome-staining-based tissue fractional analysis were performed to evaluate morphometric and microstructural changes on the ridge. Results: Group R revealed a higher percentage of bone volume (P &lt; .001), lower bone mineral density (P &lt; .01), and higher trabecular number (P &lt; .001) than did group C, which was supported by a higher bone fraction woven to lamellar bone (P &lt; .05) resulting from histologic fractional analysis. However, group RD showed no significant difference from group C. Conclusions: Root thrusting toward the constricted ridge induced hypertrophic bone modeling with a high trabecular fraction on the ridge. However, combined open-flap decortication with root thrusting did not improve the volume or quality of the constricted ridge.

scholarly journals Computer-Assisted Planning and Three-Dimensional-Printed Patient-Specific Instrumental Guide for Corrective Osteotomy in Post-Traumatic Femur Deformity: A Case Report and Literature Review

2018 ◽  
Vol 24 (1) ◽  
pp. 12-17 ◽  
Author(s):  
Lau Chi-Kay ◽  
Chui King-him ◽  
Lee Kin-bong ◽  
Li Wilson
Keyword(s):  
Lower Limb ◽  
New Technologies ◽  
Preoperative Planning ◽  
Corrective Osteotomy ◽  
Three Dimensional ◽  
Patient Specific ◽  
Computer Assisted ◽  
Limb Deformity ◽  
Satisfactory Outcome ◽  
Post Traumatic

Post-traumatic limb deformity is often multiplanar and thus is a difficult pathology to deal with surgically. Precise preoperative planning and accurate intraoperative execution are two main important steps that lead to satisfactory outcome. Computer-assisted planning and three-dimensional-printed patient-specific instrumental guides provide excellent aid to the two steps, respectively. We report a case of posttraumatic lower limb deformity in a patient who underwent closing wedge corrective osteotomy with the aid of the aforementioned new technologies.

scholarly journals Study of Morpho-Geometric Variables to Improve the Diagnosis in Keratoconus with Mild Visual Limitation

Symmetry ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 306 ◽  
Author(s):  
Francisco Cavas-Martínez ◽  
Daniel Fernández-Pacheco ◽  
Francisco Cañavate ◽  
Jose Velázquez-Blázquez ◽  
Jose Bolarín ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Operating Characteristic ◽  
Three Dimensional ◽  
Patient Specific ◽  
Control Group ◽  
Spatial Profile ◽  
New Methods ◽  
Geometric Variables ◽  
Aided Design

The validation of new methods for the diagnosis of incipient cases of Keratoconus (KC) with mild visual limitation is of great interest in the field of ophthalmology. During the asymmetric progression of the disease, the current diagnostic indexes do not record the geometric decompensation of the corneal curvature nor the variation of the spatial profile that occurs in singular points of the cornea. The purpose of this work is to determine the structural characterization of the asymmetry of the disease by using morpho-geometric parameters in KC eyes with mild visual limitation including using an analysis of a patient-specific virtual model with the aid of computer-aided design (CAD) tools. This comparative study included 80 eyes of patients classified as mild KC according to the degree of visual limitation and a control group of 122 eyes of normal patients. The metric with the highest area under the receiver operating characteristic (ROC) curve was the posterior apex deviation. The most prominent correlation was found between the anterior and posterior deviations of the thinnest point for the mild keratoconic cases. This new custom computational approach provides the clinician with a three-dimensional view of the corneal architecture when the visual loss starts to impair.

Sign in / Sign up

Export Citation Format

Share Document