scholarly journals Preparation of Activated Carbon from the Wood of Paulownia tomentosa as an Efficient Adsorbent for the Removal of Acid Red 4 and Methylene Blue Present in Wastewater

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1453
Author(s):  
Sultan Alam ◽  
Muhammad Sufaid Khan ◽  
Wahida Bibi ◽  
Ivar Zekker ◽  
Juris Burlakovs ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Second Order ◽  
Raw Material ◽  
Experimental Result ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Paulownia Tomentosa ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

Paulownia tomentosa, a woody plant that is widely found in Pakistan and in other regions of the world, was used as a raw material to prepare activated carbon using chemical and physical activation methods. Adsorption of the dyes- acid red 4 and methylene blue onto the prepared activated carbon were analyzed by batch experiments. The impacts of different adsorption parameters such as pH, temperature, contact time, initial dye concentration and adsorbent dosage were also evaluated. Equilibrium data were fitted into various isotherm models such as: Langmuir, Temkin and Freundlich. High regression values were achieved with Langmuir isotherm model. Different kinetic adsorption models such as pseudo-first-order, pseudo-second-order and intra-particle diffusion model models were applied. The adsorption kinetics was found to be best-fitted into pseudo-second-order kinetic model. The optimum pH for acid red 4 was around 1 while for methylene blue it was 8. The optimum adsorbent dosage was 0.3 g for both dyes used. The activation energy (Ea) values were 30.57 and 3.712 kJ/mol, respectively for acid red 4 and methylene blue while the enthalpy (ΔH) and entropy (ΔS) values were correspondingly as 24.88/1.1927 kJ/mol and −2843.32/−0.329 J·mol/K for the mentioned dyes. The experimental result showed that the prepared activated carbon was the best in the removal of acid red 4 and methylene blue from aqueous media and therefore, could be preferably used as cheap adsorbent in wastewater treatment.

scholarly journals Methylene Blue Dye Removal from Aqueous Media Using Activated Carbon Prepared by Lotus Leaves: Kinetic, Equilibrium and Thermodynamic Study

2021 ◽  
Vol 68 (2) ◽  
pp. 363-373
Author(s):  
Roya Salahshour ◽  
Mehdi Shanbedi ◽  
Hossein Esmaeili
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Sorption Process ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Lotus Leaves

In the present work, methylene blue was eliminated from aqueous solution using activated carbon prepared by lotus leaves. To perform the experiments, batch method was applied. Also, several analyses such as SEM, FTIR, EDAX and BET were done to determine the surface properties of the activated carbon. The results showed that the maximum sorption efficiency of 97.59% was obtained in initial dye concentration of 10 mg/L, pH of 9, adsorbent dosage of 4 g/L, temperature of 25 °C, contact time of 60 min and mixture speed of 400 rpm. Furthermore, the maximum adsorption capacity was determined 80 mg/g, which was a significant value. The experimental data was analyzed using pseudo-first order, pseudo-second order and intra-particle diffusion kinetic models, which the results showed that the pseudo-second order kinetic model could better describe the kinetic behavior of the sorption process. Also, the constant rate of the pseudo-second order kinetic model was obtained in the range of 0.0218–0.0345 g/mg.min. Moreover, the adsorption equilibrium was well described using Freundlich isotherm model. Furthermore, the thermodynamic studies indicated that the sorption process of methylene blue dye using the activated carbon was spontaneous and exothermic.

scholarly journals Comparison of novel Ziziphus lotus adsorbent and industrial carbon on methylene blue removal from aqueous solutions

2018 ◽  
Vol 78 (10) ◽  
pp. 2055-2063
Author(s):  
Asmaa Msaad ◽  
Mounir Belbahloul ◽  
Samir El Hajjaji ◽  
Abdeljalil Zouhri
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Low Cost ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Industrial Carbon ◽  
Freundlich Isotherms ◽  
Pseudo Second Order

Abstract In this work, the use of a novel low-cost adsorbent derived from Ziziphus lotus (ZL) and industrial carbon (IC) has been successfully applied to the removal of methylene blue (MB) from aqueous solutions. The efficiency of this material was studied through Lagergren pseudo-first-order and pseudo-second-order kinetic models. The process for the novel activated carbon and the IC were best represented by the pseudo-second-order rate model. Langmuir and Freundlich isotherms were used to describe the sorption equilibrium data. The Langmuir model turned out to be the most adequate and maximum capacities were measured to be 833.33 and 142.85 mg.g−1 for ZL activated carbon and IC from Sigma Aldrich, respectively. The thermodynamic study revealed that the sorption process is spontaneous and endothermic for the two adsorbents. To explain the effectiveness of MB removal, ZL activated carbon was characterized by scanning electron microscopy, Brunauer–Emmett–Teller surface area, X-ray diffraction and Fourier transform infrared spectroscopy.

Comparative studies on adsorptive removal of heavy metal ions by biosorbent, bio-char and activated carbon obtained from low cost agro-residue

2015 ◽  
Vol 73 (2) ◽  
pp. 423-436 ◽  
Author(s):  
Çisem Kırbıyık ◽  
Ayşe Eren Pütün ◽  
Ersan Pütün
Keyword(s):  
Activated Carbon ◽  
Metal Ion ◽  
Low Cost ◽  
Chemical Activation ◽  
Second Order ◽  
Isotherm Models ◽  
Standard Entropy ◽  
Order Kinetic ◽  
Solution Ph ◽  
Pseudo Second Order

In this study, Fe(III) and Cr(III) metal ion adsorption processes were carried out with three adsorbents in batch experiments and their adsorption performance was compared. These adsorbents were sesame stalk without pretreatment, bio-char derived from thermal decomposition of biomass, and activated carbon which was obtained from chemical activation of biomass. Scanning electron microscopy and Fourier transform–infrared techniques were used for characterization of adsorbents. The optimum conditions for the adsorption process were obtained by observing the influences of solution pH, adsorbent dosage, initial solution concentration, contact time and temperature. The optimum adsorption efficiencies were determined at pH 2.8 and pH 4.0 for Fe(III) and Cr(III) metal ion solutions, respectively. The experimental data were modelled by different isotherm models and the equilibriums were well described by the Langmuir adsorption isotherm model. The pseudo-first-order, pseudo-second-order kinetic, intra-particle diffusion and Elovich models were applied to analyze the kinetic data and to evaluate rate constants. The pseudo-second-order kinetic model gave a better fit than the others. The thermodynamic parameters, such as Gibbs free energy change ΔG°, standard enthalpy change ΔH° and standard entropy change ΔS° were evaluated. The thermodynamic study showed the adsorption was a spontaneous endothermic process.

scholarly journals Study of the Digestate as an Innovative and Low-Cost Adsorbent for the Removal of Dyes in Wastewater

Processes ◽  
2020 ◽  
Vol 8 (7) ◽  
pp. 852
Author(s):  
Sicong Yao ◽  
Massimiliano Fabbricino ◽  
Marco Race ◽  
Alberto Ferraro ◽  
Ludovico Pontoni ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Removal Rate ◽  
Low Cost ◽  
Second Order ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Diffusion Kinetic ◽  
Pseudo Second Order

Digestate, as an urban solid waste, was considered as an innovative adsorbent for colorant polluted wastewater. Batch adsorption experiments were carried out using digestate as an adsorbent material to remove various dyes belonging to different categories. The removal rate and adsorption capacity of dyes were evaluated and the dose of digestate, contact time, and initial dye concentration were studied. The maximum removal rate was approximately 96% for Methylene Blue. The equilibrium time for the Methylene Blue was 4 h, while for other dyes, a longer contact time was required to reach the equilibrium. The suspicion of colloidal matter release into the solution from solid fraction of the digestate led to the investigation of the consequence of a washing step of the digestate adsorbent upstream the adsorption experiment. Washed and not washed adsorbents were tested and the differences between them in terms of dye removal were compared. Moreover, experimental data were fitted by pseudo-first order, pseudo-second order, and intra-partial diffusion kinetic models as well as Langmuir, Freundlich, and Sips isotherm models. The results from fitted models showed that the adsorption of various dyes onto the digestate was mostly well fitted by the Langmuir isotherm and pseudo-second-order kinetic model.

scholarly journals Adsorption of Chromium Ions on Activated Carbon Produced from Cow Bones

2019 ◽  
Vol 20 (2) ◽  
pp. 23-32
Author(s):  
Marah Waleed Khalid ◽  
Sami D. Salman
Keyword(s):  
Surface Area ◽  
Kinetic Equations ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Raw Material ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Solution Ph ◽  
Chromium Ions ◽  
Pseudo Second Order

Due to the broad range uses of chromium for industrial purposes, besides its carcinogenic effect, an efficient, cost effective removal method should be obtained. In this study, cow bones as a cheap raw material were utilized to produce active carbon (CBAC) by physiochemical activation, which was characterized using: SEM to investigate surface morphology and BET to estimate the specific surface area. The best surface area of CBAC was 595.9 m2/gm which was prepared at 600 ᵒC activation temperature and impregnation ratio of 1:1.5. CBAC was used in aqueous chromium ions adsorption. The investigated factors and their ranges are: initial concentration (10-50 mg/L), adsorption time (30-300 min), temperature (20-50 ᵒC) and solution pH (2-11). Isotherm of adsorption and its kinetics were studied. The adsorption process was modeled statistically and was represented by an empirical model. Equilibrium data were fitted to the Langmuir and Freundlich isotherm models and the data best represented by Freundlich isotherm. Pseudo- first order and pseudo- second order kinetic equations were utilized to study adsorption kinetics, where chromium adsorption on CBAC fitted pseudo- second order fitted the data more adequately. The best removal efficiency was found to be 94.32%.

scholarly journals Removal of Methylene Blue from Aqueous Solution by Activated Carbon Prepared from Pea Shells (Pisum sativum)

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Ünal Geçgel ◽  
Gülce Özcan ◽  
Gizem Çağla Gürpınar
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Kinetic Studies ◽  
Second Order ◽  
Order Kinetic ◽  
Adsorption Processes ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Langmuir And Freundlich Models

An activated carbon was prepared from pea shells and used for the removal of methylene blue (MB) from aqueous solutions. The influence of various factors such as adsorbent concentration, initial dye concentration, temperature, contact time, pH, and surfactant was studied. The experimental data were analyzed by the Langmuir and Freundlich models of adsorption. The adsorption isotherm was found to follow the Langmuir model. The monolayer sorption capacity of activated carbon prepared from pea shell for MB was found to be 246.91 mg g−1at 25∘C. Two simplified kinetic models including pseudo-first-order and pseudo-second-order equation were selected to follow the adsorption processes. Kinetic studies showed that the adsorption followed pseudo-second-order kinetic model. Various thermodynamic parameters such as , , and were evaluated. The results in this study indicated that activated carbon prepared from pea shell could be employed as an adsorbent for the removal of MB from aqueous solutions.

scholarly journals Removal of reactive dye Remazol Brilliant Blue R from aqueous solutions by using anaerobically digested sewage sludge based adsorbents

2016 ◽  
Vol 22 (2) ◽  
pp. 167-179 ◽  
Author(s):  
Didem Özçimen ◽  
Tufan Salan
Keyword(s):  
Activated Carbon ◽  
Sewage Sludge ◽  
Dye Adsorption ◽  
Second Order ◽  
Raw Material ◽  
Brilliant Blue ◽  
Order Kinetic ◽  
Remazol Brilliant Blue R ◽  
Adsorption Capacities ◽  
Pseudo Second Order

In this study, adsorbents were produced from sewage sludge via chemical and thermal activation processes. Experiments were carried out in a tubular furnace at the heating rate of 20?C min-1 and temperature of 550 ?C with a nitrogen flow rate of 400 mL min-1 for 1 h. Dye adsorption experiments were performed with Remazol Brilliant Blue R for its several concentrations under batch equilibrium conditions by comparing sewage sludge based adsorbents with raw material and a commercial activated carbon. Maximum adsorption capacities of carbonized sewage sludge (CSWS) and activated sewage sludge (ASWS) were found as 7.413 mg g-1 and 9.376 mg g-1 for 100 mg L-1 dye solution, whereas commercial activated carbon had a capacity of 11.561 mg g-1. Freundlich and Langmuir isotherms were used to explain the adsorption mechanism together with pseudo-first-order and pseudo-second-order kinetic models. Langmuir isotherm, which had adsorption capacities of 34.60 mg g-1 (CSWS) and 72.99 mg g-1 (ASWS), provided better fit to the equilibrium data than that of Freundlich isotherm. Pseudo second-order, model which had adsorption capacities of 7.451 mg g-1 (CSWS) and 9.319 mg g-1 (ASWS), was very favorable to explain the adsorption kinetics of the dye with high regression coefficients.

scholarly journals Methylene blue removal using prepared activated carbon from grape wood wastes: adsorption process analysis and modeling

2021 ◽  
Author(s):  
Seyyed Alireza Mousavi ◽  
Davood Shahbazi ◽  
Arezoo Mahmoudi ◽  
Parastoo Darvishi
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Process Analysis ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Water And Wastewater Treatment ◽  
Adsorbent Dosage ◽  
Initial Ph ◽  
Pseudo Second Order

Abstract An adsorption study has been conducted for activated carbon obtained from grape wood wastes to assess their capability to remove methylene blue (MB) from the aqueous solutions. The properties of prepared activated carbon were characterized using FTIR, BET and SEM analyses. The effects of independent variables such as initial concentration of MB (100–500 mg L−1), initial pH of solution (3–11), adsorbent dosage (0.25–12.25 g L−1) and contact time (10–90 min) on the MB adsorption have been optimized using response surface methodology. The highest MB removal efficiency was 98% when pH, MB and adsorbent dosage were 11, 100 mg L−1 and 12.25 g L−1, respectively. The experimental data have been tested using Langmuir and Freundlich isotherm models, and the achieved data were fully fitted with the Langmuir model (R2 = 0.99), which indicates the monolayer adsorption. The adsorption kinetics well followed by the pseudo-second-order model with R2 of 0.99. This prepared activated carbon as a low-cost and eco-friendly adsorbent can be used widely for water and wastewater treatment.

Adsorption of methylene blue from aqueous solution onto activated carbons developed from eucalyptus bark and Crataegus oxyacantha core

2016 ◽  
Vol 74 (9) ◽  
pp. 2021-2035 ◽  
Author(s):  
Mohammad Ali Zazouli ◽  
Ali Azari ◽  
Samaneh Dehghan ◽  
Razieh Salmani Malekkolae
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Activated Carbon ◽  
Activated Carbons ◽  
Second Order ◽  
Point Of Zero Charge ◽  
Polluted Water ◽  
Order Kinetic ◽  
Pseudo Second Order ◽  
Eucalyptus Bark

In this study, eucalyptus bark and Crataegus oxyacantha core-based activated carbon were synthesized and their morphological features characterized by scanning electron microscopy and Fourier transform infrared spectroscopy techniques. The efficiency of synthesized adsorbents in removal of methylene blue (MB) from aqueous solution was investigated in a series of batch experiments. Furthermore, the influences of various experimental factors involving the contact time, the initial dye concentration, the adsorbent dosage, and the pH of the dye solution were investigated. The point of zero charge (pHpzc) of the applied adsorbents was also determined. In addition, the experimental data were expressed by Langmuir, Freundlich and Tempkin isotherms and pseudo-first order and pseudo-second order kinetic models. Adsorption equilibrium of the two adsorbents was reached within 1 h for MB concentrations of 20 to 100 mg/L. The equilibrium data obtained at optimum conditions of MB sorption by eucalyptus bark activated carbon and Crataegus oxyacantha core activated carbon were best fitted to Tempkin and Langmuir isotherm models, respectively. Besides, it was revealed that the adsorption rate follows a pseudo-second order kinetic model. From the findings of this study, it can be postulated that these adsorbents could be of great potential as a new class of adsorbents for organic dye removal from polluted water.

scholarly journals Optimization of Process Parameters by Response Surface Methodology for Methylene Blue Removal Using Cellulose Dusts

2018 ◽  
Vol 4 (3) ◽  
pp. 620 ◽  
Author(s):  
Seyed Hassan Sharifi Pajaie ◽  
Saltanat Archin ◽  
Ghasem Asadpour
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Batch Process ◽  
Second Order ◽  
Order Kinetic ◽  
Effective Parameters ◽  
Paper Mills ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

This study was aimed to use Cellulose dusts (CD) produced in drying section of paper mills of paper making industry as a potential adsorbent to remove methylene blue (MB) dye from aqueous solution.  The adsorbent was characterized by scanning electron microscopy and Fourier transform infrared spectrometer and X-ray Diffraction. The influences of the effective parameters including pH solution, adsorbent dosage, initial MB concentration, and contact time were optimized by CCD which stands for central composite design. The influence of these parameters on the adsorption capacity was analyzed using the batch process. The accuracy of the equation that is produced by CCD was affirmed by the variance analysis and also by calculating the correlation coefficient that connects the predicted and the empirical values of the percentage of removed MB dye. Maximum removal percentage of MB dye (98.05 %) which obtained at pH 9.84, adsorbent dosage 4.38 g L-1, MB concentration 75.50 g L-1 and time 208.13 min. Freundlich, Temkin, Harkins-Jura and Langmuir isotherms are used to analyze the empirical data. Results revealed that the data is in a satisfying agreement with the Freundlich isotherm (R2= 0.99). Pseudo-first order, Pseudo-second-order, Elovich and Intraparticle diffusion models were used to fit the kinetic data and it is found out that MB dye’s adsorption onto CD has a good agreement with the pseudo-second-order kinetic model. The results showed that CD can be an efficient and low-cost adsorbent for methylene blue adsorption.

Sign in / Sign up

Export Citation Format

Share Document