Adsorption of methylene blue from aqueous solution onto activated carbons developed from eucalyptus bark and Crataegus oxyacantha core

2016 ◽  
Vol 74 (9) ◽  
pp. 2021-2035 ◽  
Author(s):  
Mohammad Ali Zazouli ◽  
Ali Azari ◽  
Samaneh Dehghan ◽  
Razieh Salmani Malekkolae
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Activated Carbon ◽  
Activated Carbons ◽  
Second Order ◽  
Point Of Zero Charge ◽  
Polluted Water ◽  
Order Kinetic ◽  
Pseudo Second Order ◽  
Eucalyptus Bark

In this study, eucalyptus bark and Crataegus oxyacantha core-based activated carbon were synthesized and their morphological features characterized by scanning electron microscopy and Fourier transform infrared spectroscopy techniques. The efficiency of synthesized adsorbents in removal of methylene blue (MB) from aqueous solution was investigated in a series of batch experiments. Furthermore, the influences of various experimental factors involving the contact time, the initial dye concentration, the adsorbent dosage, and the pH of the dye solution were investigated. The point of zero charge (pHpzc) of the applied adsorbents was also determined. In addition, the experimental data were expressed by Langmuir, Freundlich and Tempkin isotherms and pseudo-first order and pseudo-second order kinetic models. Adsorption equilibrium of the two adsorbents was reached within 1 h for MB concentrations of 20 to 100 mg/L. The equilibrium data obtained at optimum conditions of MB sorption by eucalyptus bark activated carbon and Crataegus oxyacantha core activated carbon were best fitted to Tempkin and Langmuir isotherm models, respectively. Besides, it was revealed that the adsorption rate follows a pseudo-second order kinetic model. From the findings of this study, it can be postulated that these adsorbents could be of great potential as a new class of adsorbents for organic dye removal from polluted water.

scholarly journals Methylene Blue Dye Removal from Aqueous Media Using Activated Carbon Prepared by Lotus Leaves: Kinetic, Equilibrium and Thermodynamic Study

2021 ◽  
Vol 68 (2) ◽  
pp. 363-373
Author(s):  
Roya Salahshour ◽  
Mehdi Shanbedi ◽  
Hossein Esmaeili
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Sorption Process ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Lotus Leaves

In the present work, methylene blue was eliminated from aqueous solution using activated carbon prepared by lotus leaves. To perform the experiments, batch method was applied. Also, several analyses such as SEM, FTIR, EDAX and BET were done to determine the surface properties of the activated carbon. The results showed that the maximum sorption efficiency of 97.59% was obtained in initial dye concentration of 10 mg/L, pH of 9, adsorbent dosage of 4 g/L, temperature of 25 °C, contact time of 60 min and mixture speed of 400 rpm. Furthermore, the maximum adsorption capacity was determined 80 mg/g, which was a significant value. The experimental data was analyzed using pseudo-first order, pseudo-second order and intra-particle diffusion kinetic models, which the results showed that the pseudo-second order kinetic model could better describe the kinetic behavior of the sorption process. Also, the constant rate of the pseudo-second order kinetic model was obtained in the range of 0.0218–0.0345 g/mg.min. Moreover, the adsorption equilibrium was well described using Freundlich isotherm model. Furthermore, the thermodynamic studies indicated that the sorption process of methylene blue dye using the activated carbon was spontaneous and exothermic.

scholarly journals Mass-transfer processes in the adsorption of crystal violet by activated carbon derived from pomegranate peels: Kinetics and thermodynamic studies

2020 ◽  
Vol 15 ◽  
pp. 155892502091984
Author(s):  
Moussa Abbas ◽  
Zahia Harrache ◽  
Mohamed Trari
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Crystal Violet ◽  
Agitation Speed ◽  
Second Order ◽  
Point Of Zero Charge ◽  
Order Kinetic ◽  
Solution Ph ◽  
Pseudo Second Order ◽  
Adsorbent Dose

This study investigates the potential use of activated carbon, prepared from pomegranate peels, as an adsorbent activated using H3PO4 and its ability to remove crystal violet from an aqueous solution. The adsorbent was characterized by the Brunauer–Emmett–Teller method (specific surface area: 51.0674 m2 g−1) and point of zero charge (pHPZC = 5.2). However, some examined factors were found to have significant impacts on the adsorption capacity of activated carbon derived from pomegranate peels such as the initial dye concentration (5–15 mg L−1), solution pH (2–14), adsorbent dose (1–8 g L−1), agitation speed (100–700 r/min), and temperature (298–338 K). The best adsorption capacity was found at pH 11 with an adsorbent dose of 1 g L−1, an agitation speed at 400 r/min, and a contact time of 45 min. The adsorption mechanism of crystal violet onto activated carbon derived from pomegranate peels was studied using the pseudo-first-order, pseudo-second-order, Elovich, and Webber–Morris diffusion models. The adsorption kinetics were found to rather follow a pseudo-second order kinetic model with a determination coefficient ( R2) of 0.999. The equilibrium adsorption data for crystal violet adsorbed onto activated carbon derived from pomegranate peels were analyzed by the Langmuir, Freundlich, Elovich, and Temkin models. The results indicate that the Langmuir model provides the best correlation with qmax capacities of 23.26 and 76.92 mg g−1 at 27°C and 32°C, respectively. The adsorption isotherms at different temperatures have been used for the determination of thermodynamic parameters like the free energy, enthalpy, and entropy to predict the nature of adsorption process. The negative values Δ G0 (−5.221 to −1.571 kJ mol−1) and Δ H0 (−86.141 kJ mol−1) indicate that the overall adsorption is spontaneous and exothermic with a physisorption process. The adsorbent derived from pomegranate peels was found to be very effective and suitable for the removal of reactive dyes from aqueous solutions, due to its availability, low-cost preparation, and good adsorption capacity.

scholarly journals Comparison of novel Ziziphus lotus adsorbent and industrial carbon on methylene blue removal from aqueous solutions

2018 ◽  
Vol 78 (10) ◽  
pp. 2055-2063
Author(s):  
Asmaa Msaad ◽  
Mounir Belbahloul ◽  
Samir El Hajjaji ◽  
Abdeljalil Zouhri
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Low Cost ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Industrial Carbon ◽  
Freundlich Isotherms ◽  
Pseudo Second Order

Abstract In this work, the use of a novel low-cost adsorbent derived from Ziziphus lotus (ZL) and industrial carbon (IC) has been successfully applied to the removal of methylene blue (MB) from aqueous solutions. The efficiency of this material was studied through Lagergren pseudo-first-order and pseudo-second-order kinetic models. The process for the novel activated carbon and the IC were best represented by the pseudo-second-order rate model. Langmuir and Freundlich isotherms were used to describe the sorption equilibrium data. The Langmuir model turned out to be the most adequate and maximum capacities were measured to be 833.33 and 142.85 mg.g−1 for ZL activated carbon and IC from Sigma Aldrich, respectively. The thermodynamic study revealed that the sorption process is spontaneous and endothermic for the two adsorbents. To explain the effectiveness of MB removal, ZL activated carbon was characterized by scanning electron microscopy, Brunauer–Emmett–Teller surface area, X-ray diffraction and Fourier transform infrared spectroscopy.

scholarly journals Adsorption removal of methylene blue from aqueous solution on carbon-coated Fe3O4 microspheres functionalized with chloroacetic acid

2018 ◽  
Vol 25 (2) ◽  
pp. 353-361
Author(s):  
Zefei Zhang ◽  
Cholhwan Kim ◽  
Carlos Fernandez ◽  
Manickam Minakshi Sundaram ◽  
Thippeswamy Ramakrishnappa ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Chloroacetic Acid ◽  
Second Order ◽  
Magnetic Microspheres ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Equilibrium Data ◽  
Carbon Coated ◽  
Pseudo Second Order

AbstractWe report the preparation and employability of carbon-coated Fe3O4(Fe3O4/C) microspheres functionalized with chloroacetic acid (CAA) for the removal of methylene blue (MB) in aqueous solution. The prepared magnetic microspheres (Fe3O4/C-CAA) were characterized by the following techniques: X-ray diffraction, transmission electron microscopy, Fourier-transform infrared spectrometer, vibrating sample magnetometry, and Brunauer-Emmett-Teller. The characterization results showed that Fe3O4/C microspheres were modified by CAA without any phase change. Fe3O4/C-CAA microspheres have higher adsorption capacity for MB compared to Fe3O4/C microspheres. The Langmuir, Freundlich, and Temkin adsorption models were applied to describe the equilibrium isotherms, and the Langmuir adsorption model fitted well with the equilibrium data. The pseudo-first-order and pseudo-second-order kinetic models were used to describe the kinetics data. However, the pseudo-second-order kinetic model fitted better with the adsorption kinetics data.

scholarly journals Preparation of Activated Carbon from the Wood of Paulownia tomentosa as an Efficient Adsorbent for the Removal of Acid Red 4 and Methylene Blue Present in Wastewater

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1453
Author(s):  
Sultan Alam ◽  
Muhammad Sufaid Khan ◽  
Wahida Bibi ◽  
Ivar Zekker ◽  
Juris Burlakovs ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Second Order ◽  
Raw Material ◽  
Experimental Result ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Paulownia Tomentosa ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

Paulownia tomentosa, a woody plant that is widely found in Pakistan and in other regions of the world, was used as a raw material to prepare activated carbon using chemical and physical activation methods. Adsorption of the dyes- acid red 4 and methylene blue onto the prepared activated carbon were analyzed by batch experiments. The impacts of different adsorption parameters such as pH, temperature, contact time, initial dye concentration and adsorbent dosage were also evaluated. Equilibrium data were fitted into various isotherm models such as: Langmuir, Temkin and Freundlich. High regression values were achieved with Langmuir isotherm model. Different kinetic adsorption models such as pseudo-first-order, pseudo-second-order and intra-particle diffusion model models were applied. The adsorption kinetics was found to be best-fitted into pseudo-second-order kinetic model. The optimum pH for acid red 4 was around 1 while for methylene blue it was 8. The optimum adsorbent dosage was 0.3 g for both dyes used. The activation energy (Ea) values were 30.57 and 3.712 kJ/mol, respectively for acid red 4 and methylene blue while the enthalpy (ΔH) and entropy (ΔS) values were correspondingly as 24.88/1.1927 kJ/mol and −2843.32/−0.329 J·mol/K for the mentioned dyes. The experimental result showed that the prepared activated carbon was the best in the removal of acid red 4 and methylene blue from aqueous media and therefore, could be preferably used as cheap adsorbent in wastewater treatment.

scholarly journals Potential Biosorbent Derived fromCalligonum polygonoidesfor Removal of Methylene Blue Dye from Aqueous Solution

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Asma Nasrullah ◽  
Hizbullah Khan ◽  
Amir Sada Khan ◽  
Zakaria Man ◽  
Nawshad Muhammad ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Particle Size ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Particle Size Analyzer ◽  
Initial Ph ◽  
Pseudo Second Order ◽  
Kinetics Of

The ash ofC. polygonoides(locally called balanza) was collected from Lakki Marwat, Khyber Pakhtunkhwa, Pakistan, and was utilized as biosorbent for methylene blue (MB) removal from aqueous solution. The ash was used as biosorbent without any physical or chemical treatment. The biosorbent was characterized by using various techniques such as Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The particle size and surface area were measured using particle size analyzer and Brunauer-Emmett-Teller equation (BET), respectively. The SEM and BET results expressed that the adsorbent has porous nature. Effects of various conditions such as initial concentration of methylene blue (MB), initial pH, contact time, dosage of biosorbent, and stirring rate were also investigated for the adsorption process. The rate of the adsorption of MB on biomass sample was fast, and equilibrium has been achieved within 1 hour. The kinetics of MB adsorption on biosorbent was studied by pseudo-first- and pseudo-second-order kinetic models and the pseudo-second-order has better mathematical fit with correlation coefficient value (R2) of 0.999. The study revealed thatC. polygonoidesash proved to be an effective, alternative, inexpensive, and environmentally benign biosorbent for MB removal from aqueous solution.

Study on Adsorption of Mercury from Aqueous Solution on Activated Carbons Prepared from Palm Kernel Shell

2018 ◽  
Vol 783 ◽  
pp. 109-114
Author(s):  
Nor Salmi Abdullah ◽  
Syazrin Syima Sharifuddin ◽  
Mohd. Hazwan Hussin
Keyword(s):  
Aqueous Solution ◽  
Treatment Time ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Palm Kernel ◽  
Second Order ◽  
Solution Temperature ◽  
Order Kinetic ◽  
Palm Kernel Shell ◽  
Pseudo Second Order

The adsorption ability of powdered activated carbons (PAC) derived from palm kernel shell (PKS) was investigated. PAC was prepared by chemical activation method using ZnCl2as an activating agents. The adsorption studies of Hg(II) was carried out under control condition with constant pH, solution temperature (30 °C), treatment time (90 min) and absorbent dosage (2.0 g L-1). It was revealed that PAC efficiently removed as much as 10 mg L-1of Hg(II) with the percentage of removal up to 97.7 %. Both Langmuir and Freundlich adsorption isotherms were used to explain the adsorption behavior. Freundlich model was found to be fitted well and favored multilayer adsorption. The kinetics data were fitted with pseudo-first order and pseudo-second order, and it was found to obeys the pseudo-second order kinetic order. Recent finding suggest that PKS has the potential to be a promising precursor for the production of activated carbon with the excellent adsorption capacity to remove Hg(II) from aqueous solution.

scholarly journals Cauliflower Leave, an Agricultural Waste Biomass Adsorbent, and Its Application for the Removal of MB Dye from Aqueous Solution: Equilibrium, Kinetics, and Thermodynamic Studies

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Seraj Anwar Ansari ◽  
Fauzia Khan ◽  
Anees Ahmad
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Methylene Blue ◽  
Agricultural Waste ◽  
Second Order ◽  
Batch Adsorption ◽  
Agricultural Crop ◽  
Order Kinetic ◽  
Basic Dye ◽  
Pseudo Second Order

Cauliflower leaf powder (CLP), a biosorbent prepared from seasonal agricultural crop waste material, has been employed as a prospective adsorbent for the removal of a basic dye, methylene blue (MB) from aqueous solution by the batch adsorption method under varying conditions, namely, initial dye concentration, adsorbent dose, solution pH, and temperature. Characterization of the material by FTIR and SEM indicates the presence of functional groups and rough coarse surface suitable for the adsorption of methylene blue over it. Efforts were made to fit the isotherm data using Langmuir, Freundlich, and Temkin equation. The experimental data were best described by Freundlich isotherm model, with an adsorption capacity of 149.22 mg/g at room temperature. To evaluate the rate of methylene blue adsorption onto CLP, pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were employed. The experimental data were best described by the pseudo-second-order kinetic model. Evaluation of thermodynamic parameters such as changes in enthalpy, entropy, and Gibbs’ free energy showed the feasible, spontaneous, and exothermic nature of the adsorption process. On the basis of experimental results obtained, it may be concluded that the CLP prepared from agricultural waste has considerable potential as low-cost adsorbent in wastewater treatment for the removal of basic dye, MB.

scholarly journals Removal of crystal violate dye from aqueous solution by adsorption on mixture of activated carbon: A kinetic & equilibrium study

2015 ◽  
Vol 11 (9) ◽  
pp. 3876-3887
Author(s):  
Prakash Bhila Wagh ◽  
V.S Shrivastava ◽  
V.S Shrivastava
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Contact Time ◽  
Second Order ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Equilibrium Study ◽  
Pseudo Second Order ◽  
Percentage Removal ◽  
Adsorbent Dose

 The kinetics and equilibrium study of crystal violate dye adsorption on mixture of activated carbon (PWCAC) and (CSAC) was studied. The use of low cost ecofriendly adsorbent has been investigated as an ideal alternative to the current expensive methods of removing of dye from aqueous solution. This study was done by batch adsorption techniques. The quantitative adsorption kinetic and equilibrium parameter for crystal violate dye were studied using uv-visible adsorption spectroscopy. The effect of initial dye concentration, pH,adsorbent dose, temperature, particle size were determined to find the optimal condition for adsorption. The percentage removal of dye was found to be most effective at pH10and contact time 120 min and at an adsorbent dose 4 g/L of dye. The study indicates that’s, the percentage removal of dye increases with increasing initial dye concentration, adsorption dose and contact time and attains equilibrium at optimum conditions.The equilibrium study of adsorption of crystal violate dye on to mixture of activated carbon was investigated using pseudo first order and pseudo second order kinetic models. The adsorption kinetics was found to follow pseudo second order kinetic model. The equilibrium adsorption data of crystal violate dye on PWCAC and CSAC mixture was analyzed by Langmuir and Freundlich adsorption model. The results show that the Langmuir model provides the best correlation.

scholarly journals Cationic Dye Removal By Sugarcane Bagasse Activated Carbon From Aqueous Solution

2015 ◽  
Vol 17 (4) ◽  
pp. 784-795 ◽  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Activated Carbon ◽  
Sugarcane Bagasse ◽  
Dye Removal ◽  
Adsorption Process ◽  
Low Cost ◽  
Second Order ◽  
Cationic Dye ◽  
Pseudo Second Order

<div> <p>Low cost agricultural waste adsorbents can be viable alternatives to activated carbon for the treatment of contaminated wastewater. Sugarcane Bagasse, an abundant agriculture waste in Egypt, was used in the present study to prepare activated carbon. Batch adsorption experiments were conducted to study its effectiveness to remove cationic dye methylene blue from aqueous solution. The effects of initial dye concentrations, agitation time, solution pH and temperature on methylene blue dye removal were investigated. The optimum pH value for the maximum percentage removal of the dye was 7. Adsorption isotherms were determined and modeled with Redlich&ndash;Peterson, Langmuir and Freundlich equations at 20&ordm;C.The kinetic data were analyzed using Pseudo-first order, pseudo-second order. The mechanism of the adsorption process was determined from the intraparticle diffusion model. Thermodynamic parameters such as standard enthalpy (ΔH&deg;), standard entropy (ΔS&deg;) and free energy (ΔG&deg;) were determined.&nbsp; The equilibrium data were best fitted to the Redlich&ndash;Peterson isotherm model .The adsorption kinetics was found to follow the pseudo-second-order kinetic model with good correlation coefficient. The positive ΔH<sup>◦</sup> value indicated that the adsorption process was endothermic in nature. The results revealed sugarcane bagasse activated carboncould be employed as a low-cost alternative adsorbent in wastewater treatment.&nbsp;</p> </div> <p>&nbsp;</p>

Sign in / Sign up

Export Citation Format

Share Document